SexLab P+

[Glottis]

I followed the instructions but i still can't get this to work. When i try to open sexlab in MCM it's just blank. All other mods works fine. Only this mod doesn't work on MCM.

 

Here's my list:

[Jamesio]

1 hour ago, Glottis said:

I followed the instructions but i still can't get this to work. When i try to open sexlab in MCM it's just blank. All other mods works fine. Only this mod doesn't work on MCM.

 

Here's my list:

Hmm...

Everything looks good. are you mid-way through or starting a new game?

have you tried typing Setstage Ski_ConfigmanagerInstance 1 into console (to reset the MCMs)?

Are you only using FNIS to build the animations or are you using Pandora or Nemesis as well? (I recommend pandora)

I am assuming your skyrim build is correct for this load order (1170)?

Edited April 16 by Jamesio

[Jamesio]

20 hours ago, Mikochi35p said:

how about Noble chair? do you know how to fix it too? instead of the animation aligning with the chair, it's in front of the chair and the animation is sitting in the air xD

Im sure I can fix it. I haven't even been playing much so I haven't noticed other problems, Ill try initiating scenes on the noble chair and report back soon.

 

[Glottis]

11 minutes ago, Jamesio said:

Hmm...

Everything looks good. are you mid-way through or starting a new game?

have you tried typing Setstage Ski_ConfigmanagerInstance 1 into console (to reset the MCMs)?

Are you only using FNIS to build the animations or are you using Pandora or Nemesis as well? (I recommend pandora)

everything we have is the same from what I can see as far as version numbers go except for Faster HDT-SMP I am on the 2.5.1 version.

I am assuming your skyrim build is correct for this load order (1170)?

 

Yes i am on the last version of skyrim AE and i'm only using FNIS +new game. No matter what it just doesn't work for me. If i disable this and play with original Sexlab then it loads up on MCM but when i activate this, it goes blank on MCM.

[ttpt]

On 4/15/2026 at 12:53 AM, ttpt said:

I've tried starting a new game with V2.17.1 but I'm having this problem with paired animations just crashing the game, specifically hug animations, With everything else being equal V2.15.6 - 1.6.1170 doesn't crash with hug animation. 

 

  Reveal hidden contents

Unhandled exception "EXCEPTION_ACCESS_VIOLATION" at 0x7FF79AA4CE7B SkyrimSE.exe+0ADCE7B    mov rax, [rdx+0x10] |  BSPassByTargetTriggerModifier::Func23_140ADCE00_ADCE7B)
Exception Flags: 0x00000000 (Continuable)
Number of Parameters: 2
Exception Thread ID: 24340
Access Violation: Tried to read memory at 0x000000000010

POSSIBLE RELEVANT OBJECTS:
    R14: (hkbBehaviorGraph*) "0_Master.hkb"
    RBX: (hkbStateMachine*) "Default_Behavior"
    RSP+20: (hkbStateMachine*) "MT_PairedAnimationsBehavior"

 

This is what I get from crash logger specifically when attempting a hug animation on V2.17.1

 

I had a SLAL animation pack that was a couple of versions ahead of the SLSB conversion, which was causing the crash, oddly enough, only in the 2.17.1 version and not the 2.15.6 version. Not sure why it was crashing instead of giving animation issues like the older version but whatever.

[Sara Blackheart42]

So its looking for a folder that doesnt exist, data>skse>sexlab>registry, which stops the game from loading in the main menu

[KentuckyExpat]

3 hours ago, Sara Blackheart42 said:

So its looking for a folder that doesnt exist, data>skse>sexlab>registry, which stops the game from loading in the main menu

As a rule, this means that you don't have any SLP+ compatible animations loaded. There are starting to be a few SLSB compatible animations being released by the mod authors, but for the most part you need to first install the SLAL (SexLab Animation Loader) animations you want to use, then install either the SLSB (SexLab Scene Builder) updates to them (available on Scrab's Discord channel) or install the Automated SLSB Conversions mod (also available on Scrab's Discord channel). Should be a link to both on the main description page here. If you decide to use the SLSB updates, be certain that the ones you choose exactly match the SLAL animation pack. The updates are version specific, so if you use Billyy's animation pack v8.0, you will need the SLSB update for that version. You can also use a more recent SLSB update, one for version 8.1 or higher. 

If you're not familiar with the acronyms, SLAL is the old type of animation, compatible with OG SexLab whereas SLSB is the newer animation type used by SLP+. Hope this helps.

[kamichan67575]

Hi, I have a problem. I started using Sexlab and Sexlab P+, and I'm finding it a bit complicated. I'm trying to use the PDA mod, which uses animations from ZAZ and Toasts. I've already installed both and downloaded Automated.SLSB.Conversions from Discord and placed it after the animations, and it overwrites them. I ran Pandora as instructed, but once in the game, starting a new game, when I use PDA to run the animations, they're not aligned at all. The characters seem to be doing the animations, but they're overlapping each other in the same place. My question is, is this how Sexlab works, and do I have to make the adjustments manually, or is it a bug, or am I missing something to make them align automatically? I'm used to using Ostim, and I'm used to everything generally aligning itself there, and even the manual alignment is very easy to understand. If anyone can help me with a solution or point me to where I can find it, I'd appreciate it.

[Sara Blackheart42]

5 hours ago, KentuckyExpat said:

As a rule, this means that you don't have any SLP+ compatible animations loaded. There are starting to be a few SLSB compatible animations being released by the mod authors, but for the most part you need to first install the SLAL (SexLab Animation Loader) animations you want to use, then install either the SLSB (SexLab Scene Builder) updates to them (available on Scrab's Discord channel) or install the Automated SLSB Conversions mod (also available on Scrab's Discord channel). Should be a link to both on the main description page here. If you decide to use the SLSB updates, be certain that the ones you choose exactly match the SLAL animation pack. The updates are version specific, so if you use Billyy's animation pack v8.0, you will need the SLSB update for that version. You can also use a more recent SLSB update, one for version 8.1 or higher. 

If you're not familiar with the acronyms, SLAL is the old type of animation, compatible with OG SexLab whereas SLSB is the newer animation type used by SLP+. Hope this helps.

Dope, precciate it

[Jamesio]

On 4/15/2026 at 6:48 PM, Mikochi35p said:

how about Noble chair? do you know how to fix it too? instead of the animation aligning with the chair, it's in front of the chair and the animation is sitting in the air xD

This should be a bit better. Try updating the chairs to this. you can always tweak these to your own preference as well.

the order is [X (left/right), Y(Forward/Back), Z(Up/down), Rotation].

Furniture\noble\noblechair01.nif:
  Type: ChairNoble
  Offset:
    - [0.0, 47, 0, 180.0]
Furniture\noble\noblechair02.nif:
  Type: ChairNoble
  Offset:
    - [0.0, 47, 0, 180.0]


 

[Jamesio]

I haven't got around to too many furniture objects, but the ones I have seen so far have almost all been fucked.

 

The Noble.yaml file in the SKSE > Sexlab > Furniture folder seems to have bad offset values.
NobleBed01, Noble Chairs, Nobletablelongbench02 have issues ive discovered so far.

Here's the .yaml with my adjustments that make these spots work ok. 

 

NOTE: I assume there's plenty more issues. I doubt I can tackle them all, but I will adjust the ones I find as I fix em for myself. 

If i understood more what was going on in the .yaml files I would be happy to fix these issues quicker/better but, for the nobletablelongbench02, the animation needed a -35 y axis off-set (IN-game), but in the file, it required I add that offset to the X-axis (which made no sense to me), but it fixed the problem.

 

SL P+ Furniture -Noble FIX.zip

[Mikochi35p]

4 hours ago, Jamesio said:

I haven't got around to too many furniture objects, but the ones I have seen so far have almost all been fucked.

 

The Noble.yaml file in the SKSE > Sexlab > Furniture folder seems to have bad offset values.
NobleBed01, Noble Chairs, Nobletablelongbench02 have issues ive discovered so far.

Here's the .yaml with my adjustments that make these spots work ok. 

 

NOTE: I assume there's plenty more issues. I doubt I can tackle them all, but I will adjust the ones I find as I fix em for myself. 

If i understood more what was going on in the .yaml files I would be happy to fix these issues quicker/better but, for the nobletablelongbench02, the animation needed a -35 y axis off-set (IN-game), but in the file, it required I add that offset to the X-axis (which made no sense to me), but it fixed the problem.

 

SL P+ Furniture -Noble FIX.zip 1.47 kB · 1 download

thank you! you are goated for that fr

[Soronarr]

So if I understand this proerply, SexLab P+ is BETTER than SexLand 1.66 - more optimized, more features and should be compatible with all sex lab mods with a few expetions - that exception being animations, and to get the m to work you need BOTH the animation you would normally use with 1.66 + conversion????

[Jamesio]

6 hours ago, Soronarr said:

So if I understand this proerply, SexLab P+ is BETTER than SexLand 1.66 - more optimized, more features and should be compatible with all sex lab mods with a few expetions - that exception being animations, and to get the m to work you need BOTH the animation you would normally use with 1.66 + conversion????

yes. yes and yes. but not without its own issues. IE. Furniture animations seem to have many problems from what I've seen. 

Basically install SL
then, SL P+

Then, install the SL P+ Conversion Pack. (SLSB Automated Conversions File). [NOTE: it lists which animations you can install and have converted without any effort] 
Install all of the animations you want, as SLAL packs (normal method for SL animations). BILLY LEITO NIBBLES ETC.

Let those animations be overwritten by the P+ Conversions SLSB Automated file . 

[cryingcrow122]

When I load an expression preset in the Expression Editor, there is no response, and the high-weight sections of the expression data appear darkened and cannot be enabled.
I tried deleting and regenerating the data, but there was no change.
I understood that the process simply involved loading the expression YAML file and assigning the data to the expressions,
but is there some necessary step I’m missing?

 

The image shows the facial expression editor section of the MCM menu.
(Please note that this has been translated into Japanese.)

[Soronarr]

On 4/19/2026 at 1:24 AM, Jamesio said:

yes. yes and yes. but not without its own issues. IE. Furniture animations seem to have many problems from what I've seen. 

Basically install SL
then, SL P+

Then, install the SL P+ Conversion Pack. (SLSB Automated Conversions File). [NOTE: it lists which animations you can install and have converted without any effort] 
Install all of the animations you want, as SLAL packs (normal method for SL animations). BILLY LEITO NIBBLES ETC.

Let those animations be overwritten by the P+ Conversions SLSB Automated file . 

 

One thing I notice is thath the advanced sex detection is set to work with TNG, no mention of SOS? My modlist is built around Fertiltiy Relaoded, which works with SOS, so swithcing to TNG is NOT an option if fertiltiy wont' work with TNG schlongs.

 

In other words - does futa detection in P+ work with SOS schlongs as well?

Edited April 21 by Soronarr

[HansFlammenwerfer]

Is there a way to change the animation group or tag during sex? I mean I start dialogue with oral sex, but only then do I have oral animations to choose. I would like to have an option to change the animation group to another one. Can you do it in this version or do you need a mod for that?

Edited April 20 by HansFlammenwerfer

[Mia_D096]

For some reason after updating to the latest version of Sexlab P+ (2.17.1) the matchmaker spells are not showing in my spells menu at all, they are usually in the Illusion tab. I have ticked the option for matchmaker spells but still no luck, is there any other manual step that I need to take? I did start a new game after updating.

Edited April 20 by Mia_D096

[Mia_D096]

11 hours ago, Mia_D096 said:

For some reason after updating to the latest version of Sexlab P+ (2.17.1) the matchmaker spells are not showing in my spells menu at all, they are usually in the Illusion tab. I have ticked the option for matchmaker spells but still no luck, is there any other manual step that I need to take? I did start a new game after updating.

So my entire Sexlab along with multiple other mods aren't working anymore, this all started when I started a new game. Sexlab event does not trigger from anything at all along with my above issue. I don't know what's going on, I'll investigate but would also like to hear from others if there's some legitimacy to this issue.

[Devilmarksman]

Hey guys. Been an eternity since I last tried modding Skyrim, but here I am ! Now, I installed sexlab p+ correctly, everything seems to be working like a charm, except for one thing : the women in the animations redresses randomly during the animations, and I have no idea how to stop it. I've tried a few thing but to no avail. Can someone help me out and point the way ? I would really appreciate the help !

 

Thanks in advance !

[Strager]

On 4/22/2026 at 2:21 AM, Devilmarksman said:

Hey guys. Been an eternity since I last tried modding Skyrim, but here I am ! Now, I installed sexlab p+ correctly, everything seems to be working like a charm, except for one thing : the women in the animations redresses randomly during the animations, and I have no idea how to stop it. I've tried a few thing but to no avail. Can someone help me out and point the way ? I would really appreciate the help !

 

Thanks in advance !

Same here but with men, not women

[Gneus]

Is anyone else having an issue with missaligned creature animations? HumanxHuman works fine but when i tested it using creature summoner, everything from werewolves to dragons just face either upwards or downwards, as well as my pc.

I tried to correct it with the tools that animations setting provide, but, even thougt they do work, I cannot for the life of me get them to position the actors in the way that they should be.

I installed the conversions correctly, so im at at loss at what else to try

[Lula Luv]

The MCM menu where you can enable or disable individual animations only shows the names, but I usually can't make much of them without actually seeing the animation...

Is there a way to preview them all in some kind of “animation viewer” so I can better decide which animations I like and which I don't?

It would also be nice if you could disable running sex animations directly... (A new menu was added where you can select various options, but unfortunately I couldn’t find anything there to disable the animation)...

[Public_Swan]

On startup it says: Mandatory Cum FX type is missing.

I can't see anything like that in the requirements.

[Gneus]

4 hours ago, Gneus said:

Is anyone else having an issue with missaligned creature animations? HumanxHuman works fine but when i tested it using creature summoner, everything from werewolves to dragons just face either upwards or downwards, as well as my pc.

I tried to correct it with the tools that animations setting provide, but, even thougt they do work, I cannot for the life of me get them to position the actors in the way that they should be.

I installed the conversions correctly, so im at at loss at what else to try

SOLVED: Animations started using Creature summoner tend to be missaligned. Using any other method like the matchmaking spell doesn´t have that issue