wip Real-Time Body Physics (DirectX 11)

[CPVC]

7 hours ago, Max Valentin said:

Hello, how are you? Is it possible to use RTBP with SweetFX? I know I can use it with Reshade, but I would like to use it with SFX. If it is possible, how can I install it? Thanks

 

From what I've read it seems SweetFX can work directly with ReShade. So I'd suggest installing ReShade, then installing SweetFX using the instructions here:

 

https://github.com/CeeJayDK/SweetFX

[Max Valentin]

Hi, sorry to bother you, I've recently had a problem that hasn't happened in a long time. When I use RTBP the shoulders of male sims are slumped, as usual I'm adding my log file and the tops files I use. It happened with the top non default from Golyhawhaw, but I added these others because I also use them and maybe it can happen. I have a question, can sliders interfere with RTBP? Thanks in advance. 

 

 

[MB] Non default male top 6V.package Dumbaby new THOR male Big.package GOLYHAWHAW_TOP_CLASSICPHYSIQUE_FIX.package GOLYHAWHAW_TOP_CLASSICPHYSIQUE_NIP_BUMPVERSION.package GOLYHAWHAW_TOP_CLASSICPHYSIQUE_NIP_VERSION.package Log.txt [MB] Non default male bottom 6V.package

[Diornoir]

Hello, friend! Hope all is well.

Thank you for all of your hard work, what you're doing is freaking phenomenal!

 

Up until recently I'd been using RTBP with little to no issue. However, after the most recent game update the actual physics part just doesn't seem to be working for me anymore? Upon launching the game I do receive the RTBP Logo in the top left. I've triple-checked to make sure everything's installed in the proper place. RTBP Commander seems to launch, connect, and function properly, there just isn't any movement, not even for maxis meshes.

 

I've tested different releases of RTBP (all of which worked for me before updating my game), both with and without mods. I've also tried reinstalling DirectX.

 

*Note* I am using Reshade, and Simp4Sims's SGR Overhaul.

 

Thanks again!

Log.txt

[CPVC]

10 hours ago, Max Valentin said:

Hi, sorry to bother you, I've recently had a problem that hasn't happened in a long time. When I use RTBP the shoulders of male sims are slumped, as usual I'm adding my log file and the tops files I use. It happened with the top non default from Golyhawhaw, but I added these others because I also use them and maybe it can happen. I have a question, can sliders interfere with RTBP? Thanks in advance. 

 

 

[MB] Non default male top 6V.package 525.26 kB · 0 downloads Dumbaby new THOR male Big.package 344.68 kB · 0 downloads GOLYHAWHAW_TOP_CLASSICPHYSIQUE_FIX.package 2.19 MB · 0 downloads GOLYHAWHAW_TOP_CLASSICPHYSIQUE_NIP_BUMPVERSION.package 811.38 kB · 0 downloads GOLYHAWHAW_TOP_CLASSICPHYSIQUE_NIP_VERSION.package 1.06 MB · 0 downloads Log.txt 150.41 kB · 0 downloads [MB] Non default male bottom 6V.package 187.52 kB · 0 downloads

 

The CAS sliders shouldn't interfere with RTBP. RTBP does its magic on the sim meshes before the CAS slider modifications are applied to the mesh.

 

I'll take a look at these meshes you've provided and see if I can do a little more fine tuning to fix this problem.

[CPVC]

2 hours ago, Diornoir said:

Hello, friend! Hope all is well.

Thank you for all of your hard work, what you're doing is freaking phenomenal!

 

Up until recently I'd been using RTBP with little to no issue. However, after the most recent game update the actual physics part just doesn't seem to be working for me anymore? Upon launching the game I do receive the RTBP Logo in the top left. I've triple-checked to make sure everything's installed in the proper place. RTBP Commander seems to launch, connect, and function properly, there just isn't any movement, not even for maxis meshes.

 

I've tested different releases of RTBP (all of which worked for me before updating my game), both with and without mods. I've also tried reinstalling DirectX.

 

*Note* I am using Reshade, and Simp4Sims's SGR Overhaul.

 

Thanks again!

Log.txt 35.19 kB · 0 downloads

 

The updates may have broken something with RTBP. I haven't installed them yet, but they're downloading as I type this. I'll do some testing and see if I can figure out what's going on.

 

Thanks for your log file. That is extremely helpful. I'll get back to you soon.

 

Edit:

 

[WARN 01:19.437] Intel sim vertex declaration detected! This could mean software skinning is enabled, which will prevent RTBP from working.

 

This is probably the problem. The update probably overwrote your "GraphicsRules.sgr" file.

 

Find the line that says "setProp $ConfigGroup EnableSoftwareSkinning true" and change the "true" to "false". Or just let the RTBP Installer do it for you.

 

If that doesn't do the trick, let me know.

 

Edit 2: I can confirm that RTBP is functioning correctly with the game fully updated on my end.

Edited May 2, 2022 by CPVC

[jimmy_stardust]

Amazing mod, works like a charm. Could you consider adding male pecs on a future update? Thank you so much

[VenusN]

Hi there! 

Thinking about trying Reshade. How does it work with RTBP, has it been explained in a post somewhere along the thread? 

I remember it wasn't compatible at the beginning but then it was and I can't remember when it has been said. 

[Diornoir]

9 hours ago, CPVC said:

 

The updates may have broken something with RTBP. I haven't installed them yet, but they're downloading as I type this. I'll do some testing and see if I can figure out what's going on.

 

Thanks for your log file. That is extremely helpful. I'll get back to you soon.

 

Edit:

 

[WARN 01:19.437] Intel sim vertex declaration detected! This could mean software skinning is enabled, which will prevent RTBP from working.

 

This is probably the problem. The update probably overwrote your "GraphicsRules.sgr" file.

 

Find the line that says "setProp $ConfigGroup EnableSoftwareSkinning true" and change the "true" to "false". Or just let the RTBP Installer do it for you.

 

If that doesn't do the trick, let me know.

 

Edit 2: I can confirm that RTBP is functioning correctly with the game fully updated on my end.

 

Thank you for responding so quickly!

 

So I've done as instructed and it's helped *slightly*. I'll see physics upon the first few seconds of loading a lot or entering CAS, but they'll stop immediately after. There's also no response when using the RTBP Commander to test on the different axis, despite being connected.

[CPVC]

On 5/2/2022 at 6:43 AM, Shay Winter said:

Hi there! 

Thinking about trying Reshade. How does it work with RTBP, has it been explained in a post somewhere along the thread? 

I remember it wasn't compatible at the beginning but then it was and I can't remember when it has been said. 

 

Yes, ReShade works with RTBP. Install ReShade first then rename the ReShade "d3d9.dll" file in your "Game/Bin/" folder to "reshade.dll". After that, install RTBP. RTBP should find the ReShade DLL and load it when starting the game.

[VenusN]

On 5/6/2022 at 1:30 AM, CPVC said:

 

Yes, ReShade works with RTBP. Install ReShade first then rename the ReShade "d3d9.dll" file in your "Game/Bin/" folder to "reshade.dll". After that, install RTBP. RTBP should find the ReShade DLL and load it when starting the game.

Thanks !

[Falange]

Hey man,

is there any chance you reupload the old versions of RTBP from 0.3-p4 until 0.2, I would really like to have these versions because I wanted to take a look and test each of these in my game with some settings I have in mind.

Edited May 13, 2022 by Spect

[CPVC]

On 5/13/2022 at 1:49 PM, Spect said:

Hey man,

is there any chance you reupload the old versions of RTBP from 0.3-p4 until 0.2, I would really like to have these versions because I wanted to take a look and test each of these in my game with some settings I have in mind.

 

They're actually still available for download currently. See the attached image for directions.

 

 

Edit: You won't be seeing the "Restore", "Delete", and "Hide from members" links for obvious reasons.

Edited May 16, 2022 by CPVC
Clarification

[Falange]

for some reason the following screen appears and I don't know why.

[tinkerbelle]

18 hours ago, Spect said:

for some reason the following screen appears and I don't know why.

If I click on this mod's big, green "Download" button it will try to download the latest version.  But if you scroll down to just before the reviews, there is a "Changelog" drop-down list button.  If you click on that, you'll get the list shown in CVPC's picture.  Clicking on the version you want, will bring up the changelog for that version and at the bottom of the window is a blue link to that download.  Me, myself and I use the latest version (it works well for me, although climbing stairs can cause a busty character's boobs to smack them in the face).

 

[Falange]

dude i did it the way you and CVPC said but as you can see on the video only the latest versions from v3.0-p5 to latest can still be downloaded for me but when I try to download older versions it shows the screen I took an impression. thanks for the help anyway

 

 

[CPVC]

6 hours ago, Falange said:

dude i did it the way you and CVPC said but as you can see on the video only the latest versions from v3.0-p5 to latest can still be downloaded for me but when I try to download older versions it shows the screen I took an impression. thanks for the help anyway

 

 

Whoops! This is my bad. I must have deleted older releases so I wouldn't exceed LoversLab storage limits. I think I have backups, though. I'll see what I can dig up. Sorry about that.

[Falange]

2 hours ago, CPVC said:

 

Whoops! This is my bad. I must have deleted older releases so I wouldn't exceed LoversLab storage limits. I think I have backups, though. I'll see what I can dig up. Sorry about that.

bro, if you find it i really appreciate it, although i already appreciate it for the time search for, thanks a lot

[CPVC]

On 5/18/2022 at 3:40 AM, Falange said:

bro, if you find it i really appreciate it, although i already appreciate it for the time search for, thanks a lot

 

Unfortunately, I was only able to find a few backups between 0.2 and 0.3-p4.

 

0.2: https://www.loverslab.com/applications/core/interface/file/attachment.php?id=997355
0.3-p2: https://www.loverslab.com/applications/core/interface/file/attachment.php?id=1026815

 

I guess I assumed there wouldn't be a demand for previous versions. My mistake. I'll start backing them up from now on.

[alexlll]

I don’t know why, but the male buttocks and eggs do not turn off the latest version. I also noticed that sometimes the performance drops very much, you have to restart the game, then the performance is restored.

[CPVC]

On 5/22/2022 at 10:10 AM, alexlll said:

I don’t know why, but the male buttocks and eggs do not turn off the latest version. I also noticed that sometimes the performance drops very much, you have to restart the game, then the performance is restored.

 

A couple people have mentioned that. I think I've fixed it now. A little oversight on my part. Sorry about that. The fix will be included with the next release.

 

Performance should be improved in the next release as well. I'll spare you the details, but I think I found a way for RTBP to use less memory on the CPU side and GPU. That should hopefully make things a little faster.

[alexlll]

I don't think it's a weak cpu and gpu. ( I have amd 5950 and nvidia 3880).

[CPVC]

18 hours ago, alexlll said:

I don't think it's a weak cpu and gpu. ( I have amd 5950 and nvidia 3880).

 

Ok, it's probably something else then. I'll keep looking for the problem.

[deki]

On 5/26/2022 at 7:55 AM, alexlll said:

I don't think it's a weak cpu and gpu. ( I have amd 5950 and nvidia 3880).

 

i do have the same issues and the same GPU ... CPU is also good. the performance issues are solved for me when you click on a SIM -> Whicked Whims -> choose any action (anal, vaginal, whatever and close it again) this brings the performance back to normal for me at least. hope it helps

[alexlll]

15 hours ago, deki said:

 

i do have the same issues and the same GPU ... CPU is also good. the performance issues are solved for me when you click on a SIM -> Whicked Whims -> choose any action (anal, vaginal, whatever and close it again) this brings the performance back to normal for me at least. hope it helps

Im not use WW.

[erotoman]

It will work ? With windows 10 and DirectX 11 ?  

 

I no have DLL DirectX 9...?

Edited May 28, 2022 by erotoman