aaf [AAF] "The Fucking Manual" ~ Adult oriented setup guide ~ 30/June/2026).

[SoggyS]

On 1/26/2022 at 6:06 AM, Andarus said:

So I used Wabbajack to install Magnum Opus and now I'm trying to add some Mods ontop of it. After hours of Troubleshooting I got AAF to work and now I'm working on Body/Physics and I'm very confused between CBBE, TWB and Fusion Girl. Is there nothing like BHUNP in Fallout with Vagina Physics and stuff? Also there seem to be multiple Physics Mods. After not having touched FO4 for like 5 Years I'm definitely out of the loop here.

 

 

How were you able to get it to work? I keep crashing while loading my save lmao

[fallenslayer1]

welp something happend and i had to do a complete reinstall and now im stuck at 68% with out a clue what to do and my discord is acting up so i will upload the image here and see if any one can help me also before it said this i was getting the error of no actors found so i grabbed the vulpine patch and unique races and now i have this i have uninstalled both unique races and leito animations just to see if it was the issue nevermind found the issue i had grabbed sam earlier on accident got rid of it now everything is working fine.

 

Edited February 19, 2023 by fallenslayer1
more info

[Guest]

sometimes its just a matter of reinstalling 500,000 times b4 everything works properly lol #moddinglife

 

[vaultbait]

7 hours ago, fallenslayer1 said:

welp something happend and i had to do a complete reinstall and now im stuck at 68% with out a clue what to do and my discord is acting up so i will upload the image here and see if any one can help me also before it said this i was getting the error of no actors found so i grabbed the vulpine patch and unique races and now i have this i have uninstalled both unique races and leito animations just to see if it was the issue nevermind found the issue i had grabbed sam earlier on accident got rid of it now everything is working fine.

 

That's almost always because you installed a version of some animation pack which is incompatible with an animation patch you installed. For example, if you installed the latest version of UAP with the latest version of Mutated Lust, this will happen because there are recent changes in the latter which the former has not yet been updated to support. Be careful to install the exact versions specified for animation packs and patches.

[Dradknight]

Absolutely majestic guide! You are a saint! 


My only question is, is there anything even close to this for the skyrim side?

[RitualClarity]

Are you talking about a tutorial or the mod and the way it works.

On 2/20/2023 at 8:26 PM, Dradknight said:

My only question is, is there anything even close to this for the skyrim side?

 

[4nln415]

If AAF installs (100% load themes) but doesn't run animation -> does nothing when I try to start a scene through [Home]. 

What would be the cause for that?  

Edited February 28, 2023 by 4nln415

[Solissix]

39 minutes ago, 4nln415 said:

If AAF installs (100% load themes) but doesn't run animation -> does nothing when I try to start a scene through [Home]. 

What would be the cause for that?  

There could be a number of reasons for this, but the most common one myself and a few others have found is Mutated Lust 1.4 and the support for it in the current UAP are not compatible. Disable UAP support for it or roll back to 1.3 until Ulfberto gets around to updating UAP. If that doesn't work, more information will be needed from you. A bit of testing on my end showed that when 1.4 and current UAP are installed, AND your AAF somehow installs as well; results in AAF not playing any scenes because it can't find any valid actors.

[vaultbait]

57 minutes ago, 4nln415 said:

If AAF installs (100% load themes) but doesn't run animation -> does nothing when I try to start a scene through [Home]. 

What would be the cause for that?  

 

Lately a number of people have observed what seems to be a hard-coded position limit in AAF, possibly triggered by addition of pose packs and mods like SAM Enhanced Animations which add lots of extra positions. You might try uninstalling some of these and see if the problem goes away.

 

12 minutes ago, Solissix said:

the most common one myself and a few others have found is Mutated Lust 1.4 and the support for it in the current UAP are not compatible. Disable UAP support for it or roll back to 1.3 until Ulfberto gets around to updating UAP. If that doesn't work, more information will be needed from you. A bit of testing on my end showed that when 1.4 and current UAP are installed, AND your AAF somehow installs as well; results in AAF not playing any scenes because it can't find any valid actors.

 

AAF didn't get stuck at 68% loading for you when that happened?

[4nln415]

5 hours ago, Solissix said:

There could be a number of reasons for this, but the most common one myself and a few others have found is Mutated Lust 1.4 and the support for it in the current UAP are not compatible. Disable UAP support for it or roll back to 1.3 until Ulfberto gets around to updating UAP. If that doesn't work, more information will be needed from you. A bit of testing on my end showed that when 1.4 and current UAP are installed, AND your AAF somehow installs as well; results in AAF not playing any scenes because it can't find any valid actors.

Functions now after reverting back to 1.3. 

 

5 hours ago, vaultbait said:

 

Lately a number of people have observed what seems to be a hard-coded position limit in AAF, possibly triggered by addition of pose packs and mods like SAM Enhanced Animations which add lots of extra positions. You might try uninstalling some of these and see if the problem goes away.

 

 

AAF didn't get stuck at 68% loading for you when that happened?

I don't have SAM but I did think this was the cause at first 

 

Thanks, both 

[Solissix]

5 hours ago, vaultbait said:

 

Lately a number of people have observed what seems to be a hard-coded position limit in AAF, possibly triggered by addition of pose packs and mods like SAM Enhanced Animations which add lots of extra positions. You might try uninstalling some of these and see if the problem goes away.

 

 

AAF didn't get stuck at 68% loading for you when that happened?

Nope, loads "properly" every time. It's why I initially didn't think there was anything wrong until a couple hours in on a fresh save. Since I had a working instal before updating to the new animation packs; went through the old enable one at a time method, and that's what it ended up being. An oversight on my part for not paying attention to the version numbers in the guide.

 

Still, I'm not sure why AAF loads for some of us, and then fails for others when 1.4 and support are enabled. In my case, mods that called AAF would stall or time out when attempting to play a scene. Attempting to start a scene through the home key would bring up the beginning of the wizard, but attempting to go further results in the two dots spinning for awhile before eventually stopping. Rapidly pressing the enter key for awhile would eventually open the scene menu; but display no valid actors found.

 

I can't comment on the animation limit; I don't have any pose packs or SAM either; maybe there's two separate issues occurring in tandem? I'm using AAF .68 but I don't think any of the changes made would have any effect on the current issues. 

[vaultbait]

10 hours ago, Solissix said:

Nope, loads "properly" every time. It's why I initially didn't think there was anything wrong until a couple hours in on a fresh save. Since I had a working instal before updating to the new animation packs; went through the old enable one at a time method, and that's what it ended up being. An oversight on my part for not paying attention to the version numbers in the guide.

 

Still, I'm not sure why AAF loads for some of us, and then fails for others when 1.4 and support are enabled. In my case, mods that called AAF would stall or time out when attempting to play a scene. Attempting to start a scene through the home key would bring up the beginning of the wizard, but attempting to go further results in the two dots spinning for awhile before eventually stopping. Rapidly pressing the enter key for awhile would eventually open the scene menu; but display no valid actors found.

 

I can't comment on the animation limit; I don't have any pose packs or SAM either; maybe there's two separate issues occurring in tandem? I'm using AAF .68 but I don't think any of the changes made would have any effect on the current issues. 

 

The next person to run into this, a copy of the AAF log might help to explain what's going on there (it writes to the "user" log directory beneath where you find the Papyrus logs) . I don't use UAP or would check it myself.

[Anon2102]

Trying to get this to work with the massive MOFAM mod list.  Anyone have any advice?

[Laezel]

HI, i asked at fusiongirls thread aswell but any idea why i wont get a nude body? 

Im using Mod organizer 2.

 

I pressed build morphs, did the overwrite thingy on mod organizer, my body is there yes. But if i undress i have the nevernude vanilla body. 

[vaultbait]

1 hour ago, AverageSkyrimEnjoyer said:

HI, i asked at fusiongirls thread aswell but any idea why i wont get a nude body? 

Im using Mod organizer 2.

 

I pressed build morphs, did the overwrite thingy on mod organizer, my body is there yes. But if i undress i have the nevernude vanilla body. 

 

From what I understand (I'm a Vortex user), Mod Organizer requires a special configuration for BodySlide so that it will write meshes to the correct directory where the game will find them.

[Guest]

does raider pet and rogue sexbot both still work, i noticed they quite old AAF 81 or something and any links to a complete fusion girl cloth and armor bodyslides mod or replacer or does the FG internals have no problems?

[lee3310]

38 minutes ago, RandomKhajiit said:

raider pet and rogue sexbot both still work

If they are listed in the manual, then yes, they should work.

[vaultbait]

1 hour ago, RandomKhajiit said:

any links to a complete fusion girl cloth and armor bodyslides

 

https://www.loverslab.com/topic/157713-the-official-fusion-girl-175-armor-and-clothing-conversion-thread/

[mrwast3r]

Great guide! Quick question though, what mod here changes movement animations? My male character is using female movement animations and is also using a kung fu pose when unarmed lol, I can't find what mod it is so I thought I'd ask on here.

[Guest]

so is fusion girl - 3BBB just yeeted  from existence?

[vaultbait]

38 minutes ago, RandomKhajiit said:

so is fusion girl - 3BBB just yeeted  from existence?

 

Not sure what you mean. Fusion Girl is inherently 3BBB since several years now. There is no non-3BBB Fusion Girl unless you want to play with a very outdated version nobody is making new conversions for.

[KristinaJ917]

So I hadn't played Fallout 4 in 6 months or so. Decided to boot it up today and apparently it fell apart. I'm getting the "NO_F4$E" message and MCM has stopped working. I've uninstalled them both and reinstalled exactly how it says to. (I did MCM both through Vortex and Manually) No luck. Help! Lol.

[vaultbait]

6 minutes ago, KristinaJ917 said:

So I hadn't played Fallout 4 in 6 months or so. Decided to boot it up today and apparently it fell apart. I'm getting the "NO_F4$E" message and MCM has stopped working. I've uninstalled them both and reinstalled exactly how it says to. (I did MCM both through Vortex and Manually) No luck. Help! Lol.

 

The most likely reason is you started Fallout4.exe instead of f4se_loader.exe (the wrapper which starts F4SE to start Fallout 4).

[SELIDSNEIK]

I cannot seem to get the NSFW Sound Pack to work on Fallout 4, I tried following the instructions as best as I can but they don't seem that clear to me. Could anyone troubleshoot me rq?

[vaultbait]

4 minutes ago, SELIDSNEIK said:

I cannot seem to get the NSFW Sound Pack to work on Fallout 4, I tried following the instructions as best as I can but they don't seem that clear to me. Could anyone troubleshoot me rq?

 

Those instructions on the file page are 4 years old. These days it's assumed everyone has a full-featured mod manager, in which cause you just install it with your mod manager like any other mod, no special instructions required.