Patch - SunJeong's Ninirim Ported Mods for SE and Schlongs of Skyrim/SlexLab Aroused Redux

[AtomicPlayboy]

Patch - SunJeong's Ninirim Ported Mods for SE and Schlongs of Skyrim/SlexLab Aroused Redux

View File

---

THIS PATCH IS NO LONGER SUPPORTED FOR THE 6.0 VERSION. IF I HAVE TIME IN THE FUTURE TO CREATE A NEW PATCH FOR 6.0 I WILL UPDATE THIS PAGE.

 

This is patch enables SunJeong's Ninirim Ported Mods to work with Schlongs of Skyrim (for women/futa) and SexLab Aroused.

 

Example

Spoiler

Armor with lower part equipped:

Armor without lower part:

 

Requirements:

• SexLab Framework SE
• SexLab Aroused Redux SE
• Schlongs of Skyrim SE
• ERF's Horse Penis Redux SSE or SOS Equippable Horse Cocks (or any other SOS addon that gets ported in the future)
• SunJeon's Ninirim Ported Mods - full pack version 5 - NO LONGER AVAILABLE
• BodySlide with CBBE morphs

 

What this patch does:

• Most skirts/pants/lower parts are now on armor slot 52
• Overlapping armor pieces (skirts over pants, belts, etc.) had their slots swapped with the lower parts to avoid conflicting with slot 52
• SOS_revealing tag was added to all chest pieces for compatibility with slot 52
• EroticArmor tag was added to slutty/damaged/revealing chest pieces for compatibility with SexLab Aroused
• New BodySlide nifs were built with the new corresponding armor slots

 

Installation:

1. Install all of the requirements and their requirements
2. Install SunJeong's Ninirim port full pack version 5
3. Install this mod and let it overwrite any conflicting nifs; load after SunJeon's mod in MO2/Vortex and load the esp after his in your load order
4. Run BodySlide on SunJeong's Ninirim outfits
5. In-game, equip a female schlong

 

IMPORTANT: "Clean Schlongified Armors" in the SOS MCM before equipping one of Nini's outfits.

 

Updates:

I plan to update this whenever SunJeong adds a new armor from Nini to the full pack. The ESL for this patch has his ESP as a master, so the full pack is required. I will not be supporting individual outfits.

---

• Submitter
  AtomicPlayboy
• Submitted
  10/27/2019
• Category
  Adult Mods
• Requires
  SexLab Framework SE, SexLab Aroused Redux SE, Schlongs of Skyrim, BodySlide and Outfit Studio
• Regular Edition Compatible
  No

 

[drocke896]

Whoa, nice one. High praise!

[devildx]

Nice work.

[BeefyJackal]

Do you need CBBE for this?

[AtomicPlayboy]

9 hours ago, Fupareal said:

Do you need CBBE for this?

As far as I'm aware, yes, the original mod will only work with CBBE. I don't know if SunJeong has plans to do UUNP conversions, though you could ask in his thread.

[Hectorim]

The link to SunJeong's Ninirim full pack 5 no longer works, the thread appears to be deleted. Did something happen? Does anybody have the link to the file still?

[AtomicPlayboy]

2 hours ago, Hectorim said:

The link to SunJeong's Ninirim full pack 5 no longer works, the thread appears to be deleted. Did something happen? Does anybody have the link to the file still?

Unfortunately that thread got removed without any notification to him, and he was really upset when I contacted him about it. I guess he's putting everything on hold for now. Even his website is down. I've updated the file info.

 

Edit: just spoke with him on discord, he'll be moving everything to a new place sometime next year. I'll update this thread when it's ready.

[demicabestan]

5 hours ago, AtomicPlayboy said:

Unfortunately that thread got removed without any notification to him, and he was really upset when I contacted him about it. I guess he's putting everything on hold for now. Even his website is down. I've updated the file info.

 

Edit: just spoke with him on discord, he'll be moving everything to a new place sometime next year. I'll update this thread when it's ready.

https://www.patreon.com/SunJeong/posts?tag=SMP

 

you spoke with her , Sunjeong its a wife ?

[demicabestan]

8 hours ago, Hectorim said:

The link to SunJeong's Ninirim full pack 5 no longer works, the thread appears to be deleted. Did something happen? Does anybody have the link to the file still?

https://www.patreon.com/SunJeong/posts?tag=SMP

[Hectorim]

Thanks for the replies, I guess the situation is pretty clear - many mod creators go to Patreon nowadays.

[onkalabonka]

Too bad to see Sun get booted from LL for no apparent reason, switching entirely to patreon and/or discord..i see alot of mods disappear into thin air lately here aswell as on the nexus...you look for updates on your mods...mods cant be found anymore...

 

 

well another thing for that patch, will it work with the new ERF: SOS Addon - Futanari CBBE SSE 0.9  aswell?

[g23028284]

22 hours ago, AtomicPlayboy said:

Unfortunately that thread got removed without any notification to him, and he was really upset when I contacted him about it. I guess he's putting everything on hold for now. Even his website is down. I've updated the file info.

 

Edit: just spoke with him on discord, he'll be moving everything to a new place sometime next year. I'll update this thread when it's ready.

Sorry for a question.

I dont know what's different the bodyslide file with sunjeong's. Could you tell me?

Because I want to use with 3ba bs file, so I need to know the different.

[AtomicPlayboy]

On 12/31/2019 at 5:47 PM, g23028284 said:

Sorry for a question.

I dont know what's different the bodyslide file with sunjeong's. Could you tell me?

Because I want to use with 3ba bs file, so I need to know the different.

The only one Sun makes compatible is CBBE; there is a 3BBB CBBE body though, and Sun's mods is fully compatible with that.

[AtomicPlayboy]

On 12/31/2019 at 1:10 AM, demicabestan said:

https://www.patreon.com/SunJeong/posts?tag=SMP

 

you spoke with her , Sunjeong its a wife ?

I didn't know she was on patreon at all, I'm dumb. Thanks!

[AtomicPlayboy]

Updated the topic again with info that I only just now learned about because I'm dumb.

[SlabLover]

This is great by the way. Makes the shirts and pants actually work like, you know, shirts and pants actually do.  A pity her stuff was removed here, though honestly the Patreon idea makes a fair amount of sense.  Misses a lot of the centralization and discoverability of forums like this, but even a small tip now and then is pretty nice.

[AtomicPlayboy]

1 hour ago, SlabLover said:

This is great by the way. Makes the shirts and pants actually work like, you know, shirts and pants actually do.  A pity her stuff was removed here, though honestly the Patreon idea makes a fair amount of sense.  Misses a lot of the centralization and discoverability of forums like this, but even a small tip now and then is pretty nice.

She's active in a couple of discord servers too, so as she updates her pack I'll continue to update mine.

[BigOnes69]

10 hours ago, AtomicPlayboy said:

She's active in a couple of discord servers too, so as she updates her pack I'll continue to update mine.

Has anyone figured out what the problem between LL and Jeong is?

[devildx]

Is there any way to make the shining will lower revealing? When I equip it hides the SOS.

 

EDIT: On sexlab I can see that is on the slot 52 thats why is hiding. 

 

EDIT2: Changed the piece to slot 49 and worked. 

 

How to do for those that want (make a backup of the plugins and nifs):

 

Open Sunjeon Ninirim EA Patch.esp on Creation Kit setting as active.

In the search type 0ShiningWillLower. Should have 2 options 0ShiningWillLower and 0ShiningWillLowerAA.

Open both and change the slot to 49. Save and close CK.

Go to data>meshes>ninistuff>ShiningWill and make a backup of the lower_0 and lower_1 meshes.

Open them on Nifscope > Ninode > BStriShape > BSDismemberSkinInstance

Go down on Partitions exapand it and double click on SBP_52_MOD_PELVIS_SECONDARY, with the arrow keys change to 49

Do this for the other BStriShape (for me shows 66, 70, 77 BStriShape with the BSDismenberSkinInstance)

Do this for both meshes

[Dragoncoc696969]

On 1/3/2020 at 8:57 AM, AtomicPlayboy said:

The only one Sun makes compatible is CBBE; there is a 3BBB CBBE body though, and Sun's mods is fully compatible with that.

Can you tell me if [SunJeong] Ninirim Collection 5.0 is compatible with 3BA body and its physics?

I got a separate "Ninirim Collection 3BA" file from LoversLab. But when i try to build 3BA outfit from that file on body slide, no preset appears on any of the outfit.

And now i found a Ninirim Collection 3BA fix on google. Don't know which one to use.

[AtomicPlayboy]

On 3/18/2020 at 9:07 AM, Dragoncoc696969 said:

Can you tell me if [SunJeong] Ninirim Collection 5.0 is compatible with 3BA body and its physics?

I got a separate "Ninirim Collection 3BA" file from LoversLab. But when i try to build 3BA outfit from that file on body slide, no preset appears on any of the outfit.

And now i found a Ninirim Collection 3BA fix on google. Don't know which one to use.

I honestly can't tell you, I don't know what would be considered "official" when it comes to Sun's stuff here. You can try asking on her discord channel if you use it, I can PM you the invite once I ask her.

[Grummkol]

On 3/18/2020 at 2:07 PM, Dragoncoc696969 said:

Can you tell me if [SunJeong] Ninirim Collection 5.0 is compatible with 3BA body and its physics?

I got a separate "Ninirim Collection 3BA" file from LoversLab. But when i try to build 3BA outfit from that file on body slide, no preset appears on any of the outfit.

And now i found a Ninirim Collection 3BA fix on google. Don't know which one to use.

This is just the slidergroup file needing to be updated to include the body type.

 

Open up the .xml file that came with the ninirim collection in calientetools\bodyslide\slidergroups.

 

It will contain something like

 

<SliderGroups>
    <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
</SliderGroups>

 

Copy everything between "<group name =" and "</Group>" and paste it twice underneath so you end up with something like

 

<SliderGroups>
    <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
      <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
      <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
</SliderGroups>

 

Rename two of the group names that you just copied to CBBE and 3BBB.

 

<SliderGroups>
    <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
      <Group name="CBBE">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
      <Group name="3BBB">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
</SliderGroups>

 

Save file then refresh groups in bodyslide.

 

If the 3BA outfits you have are showing up as unassigned then you would need to create a group file for them.  Do this in bodyslide, but make sure you create the three groups containing all of the armors (one for the slider group name that you are filtering on, the other two for "CBBE" and "3BBB" so your presets work).)

[Dragoncoc696969]

3 hours ago, Grummkol said:

This is just the slidergroup file needing to be updated to include the body type.

 

Open up the .xml file that came with the ninirim collection in calientetools\bodyslide\slidergroups.

 

It will contain something like

 

<SliderGroups>
    <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
</SliderGroups>

 

Copy everything between "<group name =" and "</Group>" and paste it twice underneath so you end up with something like

 

<SliderGroups>
    <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
      <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
      <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
</SliderGroups>

 

Rename two of the group names that you just copied to CBBE and 3BBB.

 

<SliderGroups>
    <Group name="[SunJeong] Ninirim Collection Group">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
      <Group name="CBBE">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
      <Group name="3BBB">
        <Member name="[SunJeong] 300+ Gift Bless 0019 Upper - CBBE"/>
        <Member name="[SunJeong] Adler Boots - CBBE"/>
        <Member name="[SunJeong] Adler Gloves - CBBE"/>
		etc
    </Group>
</SliderGroups>

 

Save file then refresh groups in bodyslide.

 

If the 3BA outfits you have are showing up as unassigned then you would need to create a group file for them.  Do this in bodyslide, but make sure you create the three groups containing all of the armors (one for the slider group name that you are filtering on, the other two for "CBBE" and "3BBB" so your presets work).)

Thanks. i did that. Had no idea that bodyslide had this problem.

 

[AtomicPlayboy]

13 hours ago, Dragoncoc696969 said:

Thanks. i did that. Had no idea that bodyslide had this problem.

Oh if that's what you were going for, that's not really a bug, more just bodyslide not adding new objects to a default group. I've always had to create new slider groups for outfits that didn't come with them, especially adding them to the default CBBE or 3BBB slider groups.

[Grummkol]

19 hours ago, Dragoncoc696969 said:

Thanks. i did that. Had no idea that bodyslide had this problem.

 

Not really a problem with bodyslide, just a case of people not using consistent slider group names or not updating from oldrim groupnames (like CB+ advanced, etc) when porting.  Or they save the group to their specific preset, rather than the standard generic CBBE/UUNP type. But it's very easily fixed by just a few copy+pastes in a the slidergroup xml file.  If you were using a UUNP/BHUNP based body you'd do the same as above, but rename the duplicated groups to "UUNP" and "BHUNP"