Arousal Based Breast Adjuster for SE (ABBA)

[Guest]

I don't know if this is a known problem, I was using abba in version 1.6.1170 and I started noticing constant glitches, it seemed like the game was always loading something, while the character runs, moves, as if something was heavy.
After removing the mod, the game returned to normal, always at 60 fps.

A question, would it be possible to export the clothes from the mod, so I could use them even without the mod active?

[Yinkle]

9 hours ago, squirrel_123 said:

I don't know if this is a known problem, I was using abba in version 1.6.1170 and I started noticing constant glitches, it seemed like the game was always loading something, while the character runs, moves, as if something was heavy.
After removing the mod, the game returned to normal, always at 60 fps.

A question, would it be possible to export the clothes from the mod, so I could use them even without the mod active?

Some of the Racemenu calls stress the game, no way around this. Disabling incremental morphs in the ABBA MCM will help.

Export away for your own use.

[Guest]

On 2/22/2025 at 5:12 PM, Yinkle said:

Some of the Racemenu calls stress the game, no way around this. Disabling incremental morphs in the ABBA MCM will help.

Export away for your own use.

 

I have the "abba 3ba patch" here where I can see the clothes on the bodyslide, but I can't open them in the game, how do I open them in the game?

[Yinkle]

5 hours ago, Rapilo said:

 

I have the "abba 3ba patch" here where I can see the clothes on the bodyslide, but I can't open them in the game, how do I open them in the game?

You would need to make a new skyrim plugin and add the armour/addon records etc. You could copy them as new records from abba.esp using Xedit.

The other option would be to install abba as normal and just disable it in the MCM - way simpler!

Edited February 24, 2025 by Yinkle

[phi1618]

On 1/26/2025 at 7:00 AM, Yinkle said:

On 1/26/2025 at 3:24 AM, squirrel_123 said:

Can this mod already be used with Ostim standalone? I want to leave SL and only use Ostim SA

Yes, it should be fine. I don't use Ostim so it's not extensively tested, let me know if there are any issues.

I'm trying to go the OStimSA SL-free route  also, but I'm running into issues. If I disabe SL, ABBA doesn't appear in the MCM; only when I enable SL again do ABBA's settings become accessible. Not seeing any error notifications - it just behaves like ABBA isn't installed when SL is turned off.  Looks there's some lingering SL‌dependencies, so I'll be continuing to run SL just for this mod, since it's an indispensable mod for me. Has anyone gotten this working with OStimSA by itself?.

Edited March 5, 2025 by phi1618

[Guest]

8 hours ago, phi1618 said:

Estou tentando seguir a rota OStimSA SL-free também, mas estou tendo problemas. Se eu desabilitar o SL, o ABBA não aparece no MCM; somente quando eu habilito o SL novamente as configurações do ABBA se tornam acessíveis. Não vejo nenhuma notificação de erro - ele apenas se comporta como se o ABBA não estivesse instalado quando o SL é desligado. Parece que há algumas dependências persistentes do SL, então continuarei a executar o SL apenas para este mod, já que é um mod indispensável para mim. Alguém conseguiu fazer isso funcionar com o OStimSA sozinho?.

 

I don't know what your loading order is, but here Abba is working correctly with ostim, including in mcm there is an option for you to make it select ostim for the animations.

[Yinkle]

14 hours ago, phi1618 said:

I'm trying to go the OStimSA SL-free route  also, but I'm running into issues. If I disabe SL, ABBA doesn't appear in the MCM; only when I enable SL again do ABBA's settings become accessible. Not seeing any error notifications - it just behaves like ABBA isn't installed when SL is turned off.  Looks there's some lingering SL‌dependencies, so I'll be continuing to run SL just for this mod, since it's an indispensable mod for me. Has anyone gotten this working with OStimSA by itself?.

SexLab & OStimSA are both non-hard requirements. ABBA should show up in the MCM with neither installed when starting a new game. Bear in mind (you probably know this, but just in case) you should never remove mods on a current save game.

[phi1618]

Thanks for the replies. Started to troubleshoot my 900+ mod load order, but before getting very far, I noticed I had Goams Elven Ears enabled, which I don't really use. Disabled it and ABBA reappeared in the MCM. I have no idea what happened - Skyrim per usual. And yes, I'm generating lots of throwaway new games to test this.

 

Also I'd forgotten that ABBA voices and incremental changes, which I really like, are tied to SL. So still debating whether I want to retain it in my load order. Thanks again for your help!

[Dez65]

Hi - trying your mod out on 1.6.1170 and it works great! 

 

I'm mainly interested in the PC's nipples getting erect from arousal, but I also like the idea of pussy swelling as well.  Would prefer no morphs to the breasts or ass.  Will setting all the breast Maximum settings to zero do that or is there a different way to stop morphs on breasts (and ass).

 

Thanks!

Edited March 10, 2025 by Dez65

[Vandenham]

Hey I really like how your mod functions but for some reason when I go into my game Skyrim SE latest update no AE DLC, new save, I get an error message telling me ABBA mod check failed I have the most recent PO3 Papyrus, SL, SLA redux SSE, ABBA 3BA Patch and FNIS but for some reason I can still enable ABBA and mess with the sliders/settings but the pussy morph when aroused is lacking detail like the lips are not open but I can see the crease and the distortion from arousal but that’s it, also I use the Cbbe 3ba body and armors via bodyslide I’m not an expert in mods but I have some knowledge about them am I doing something wrong? Have you heard of this issue before? Sorry lol I just want it to work correctly please help if you can 

[Yinkle]

14 hours ago, Dez65 said:

setting all the breast Maximum settings to zero do that or is there a different way to stop morphs on breasts (and ass).

You could do that, but the best way would be to edit one of the /skse/plugins/abba/slider-profile.json files to only use the sliders you want. Read the read me file 1st so you don't break it! You need to load your edited profile in the MCM settings AFTER you've changed it. Otherwise, ABBA won't load the new slider set.

 

4 hours ago, Vandenham said:

I get an error message telling me ABBA mod check failed

Which mod failed?

[Vandenham]

It gives me a message prompt telling me “ABBA modcheck failed: make sure I have PO3’s PapyrusExtender installed” but I looked and I do I also went to the mod page and checked for additional possible files but no luck there’s only 1 file and I have it installed. I use vortex mm, idk if that has anything to do with it lol 

[Vandenham]

I also have the same body slide adjustments but my body doesn’t seem to want to morph based on arousal at least the vagina part the breasts seem to adjust but not the vagina 

[Vandenham]

The vagina does some wierd stuff like it doesn’t open based off arousal but I can see the distortion in the phases of arousal but there’s no texture 

[Dez65]

2 hours ago, Yinkle said:

the best way would be to edit one of the /skse/plugins/abba/slider-profile.json files to only use the sliders you want.

Got it!  Thanks!  Although I'm coming to appreciate the charm of all of the sliders.

[Vandenham]

Here I’ll provide pictures for my issue lol

[Vandenham]

Ok lol so just put papyrus to latest and the message disappeared… my bad lol but my characters pussy still is not showing morphing. I’m using the ABBA CBBB body and the innie/outie slider is at 100% for closed 

[Dez65]

Hi - having fun learning how to use your great mod!

 

When arousal increases, the only way I can see the results is to unequip and re-equip the clothing.  Right now, I'm still in the Lorkhan alternative start location so the PC is wearing the Roughspun Tunic, in my case the prisoner bikini mesh from BD armors.  I have that set to be topless (a Zap setting in Bodyslide).  I've run bodyslide with the ABBA body selected with all clothing sets, including the BD prisoner bikini. 

 

It seems that morphs only show on screen when clothing is equipped or unequipped.  For example, if I increase arousal while the PC is naked, I only see the results if the bikini is equipped.

 

Another observation - If I save and reload an earlier save before the morphs, the morphs are still showing until I equip/unequip clothing.

 

I checked Disable Armor Factor for the Roughspun Tunic in the MCM but that doesn't have had an effect.

 

I'm sure I'm doing something basically wrong.  Maybe something in Bodyslide?  Maybe my clothing sets have to be converted for the ABBA Body??

[Yinkle]

 

2 hours ago, Dez65 said:

Hi - having fun learning how to use your great mod!

 

When arousal increases, the only way I can see the results is to unequip and re-equip the clothing.  Right now, I'm still in the Lorkhan alternative start location so the PC is wearing the Roughspun Tunic, in my case the prisoner bikini mesh from BD armors.  I have that set to be topless (a Zap setting in Bodyslide).  I've run bodyslide with the ABBA body selected with all clothing sets, including the BD prisoner bikini. 

 

It seems that morphs only show on screen when clothing is equipped or unequipped.  For example, if I increase arousal while the PC is naked, I only see the results if the bikini is equipped.

 

Another observation - If I save and reload an earlier save before the morphs, the morphs are still showing until I equip/unequip clothing.

 

I checked Disable Armor Factor for the Roughspun Tunic in the MCM but that doesn't have had an effect.

 

I'm sure I'm doing something basically wrong.  Maybe something in Bodyslide?  Maybe my clothing sets have to be converted for the ABBA Body??

You need to have "build morphs" ticked in Bodyslide (bottom left) for all your body/clothing items. This makes a ".tri" sidecar file which racemenu uses to do the morphs in game. If you have built everything with tri files, there is a bug when SSE Engine fixes is installed where morphs stop working. There's a mod that fixes this now: OverlayFix (optional file).

Edited March 11, 2025 by Yinkle

[Vandenham]

Fixed: Hi I learned more about your fantastic mod by looking at an earlier post in the forum that seems to have explained the issue I was encountering. Started a fresh new game just in case for cleanliness purposes, and ABBA began working as intended after I enabled it. Apologies for introducing an issue that was already solved lol. Though I do have a question, does the LabiaVarient file for CBBB bodies work well with your file or does it fuck up the morphs? Apologies for my ignorance in that matter

[Vandenham]

Sorry I only ask this because I have that mod with required files which includes ABBA but I notice no difference 

 

[Dez65]

1 hour ago, Yinkle said:

You need to have "build morphs" ticked in Bodyslide (bottom left) for all your body/clothing items.

Thanks for the quick response!  I had "build morphs" ticked. 

 

The morphs are working - they just don't show until I unequip clothing.  Once I do that, the morphs continue to show when clothing is re-equipped.   However, if additional morphing occurs, it doesn't show until clothing is unequipped.  Again, though, the morphs persist if the clothing is re-equipped.  My thinking is that the foregoing would not happen unless "build morphs" was ticked in Bodyslide.

 

I'll try the SSE Engine fixes fix.

Edited March 11, 2025 by Dez65

[Dez65]

1 hour ago, Dez65 said:

I'll try the SSE Engine fixes fix.

The fix appears to have worked!  Morphs show as soon as I increase arousal. 

 

Love this mod!  Thanks for your help!

[phyire]

I'm asking kindly to not make heal sounds a hard requirement in the future please

EDIT:

I am also getting the error that I don't have SKSE or Po3's Papyrus Extender installed, but I 1000% do.

EDIT 2:

Might not be ABBA-related issue, but I've reinstalled SKSE already, multiple times and I have Skyrim SE AE as my skyrim on steam is fully updated (No AE upgrade purchased). This is with the latest version of Papyrus Extender (5.10.0):

skse64.log

checking plugin po3_PapyrusExtender.dll
plugin po3_PapyrusExtender.dll (00000000  00000000) no version data 0 (handle 0)

 

EDIT 3:
I got ABBA working with Po3's PE version released on 11 Dec 2023... (5.6.2)

 

 

 

 

Edited March 14, 2025 by phyire

[Jessmari]

Just wanted to say thanks again. This mod has become a stable and is kinda like the fidget spinner of my list lol.