SexLab SE - Sex Animation Framework v1.66b - 01/18/2024

[Night Driver]

On 7/9/2024 at 8:12 PM, Night Driver said:

I've definitely used sexlab successfully with nemesis before. I can see sexlab being processed in nemesis whenever I launch it. At this point I'm sure its either a modlist issue, or i need to reinstall sexlab

I'm missing fnis sexlab framework idles, which is probably causing the issue.

EDIT: Restored FNIS sexlab framework idles, however that changed nothing. Back at square one.

Edited July 12, 2024 by Night Driver

[wssb2024]

New question 😭

All characters are in the "大" pose, even when I start a new game!

 

 

Are there any preliminaries I'm missing?

I also noticed that fnis is warning me that something doesn't match, Is this the reason for the emergence of "大"?，how can I fix this?

 

[Night Driver]

26 minutes ago, wssb2024 said:

New question 😭

All characters are in the "大" pose, even when I start a new game!

 

 

Are there any preliminaries I'm missing?

I also noticed that fnis is warning me that something doesn't match, Is this the reason for the emergence of "大"?，how can I fix this?

 

That pose always indicates a problem with FNIS or whatever animation tool you use.

Select the skeleton patch at the bottom of FNIS to probably fix this

Edited July 11, 2024 by Night Driver

[wssb2024]

3 hours ago, Night Driver said:

That pose always indicates a problem with FNIS or whatever animation tool you use.

Select the skeleton patch at the bottom of FNIS to probably fix this

Thanks for your reply

I just realized that the Deviously Cursed Loot I installed was the AE version

When I changed to the SE version, t-pose disappeared😂

Edited July 11, 2024 by wssb2024

[necessarytrash]

Is there a way to reset SexLabs so I can go through the in-game install process again? I'm getting an issue where my SexLab Registry folder is empty and I have 0 animations when I go to MCM Sexlab>Debug. I've tried reinstalling Sexlabs, as well as rerunning FNIS but have had no success. I've been getting a related error whenever I run the game.

Edited July 12, 2024 by necessarytrash

[Night Driver]

Well, my final clue is that in debug mode, i get two messages in the console whenever I try and start an animation.

Sexlab - fatal - thread[1] addactor(lydia) - failed to add actor - they are not a valid target for animation
Sexlab - notice - startsex() - failed to add some actors to thread

This is not a lydia specific problem as it happens with any female actor. Not sure what to do now, my xpmsse is up to date so I'm not sure what's ruling out lydia and others

[LoverKing21]

I've tried everything and still.I won't appear in m.C.M.

[Riot445]

I am playing on 1.5.97 so Ive got all the SE versions of the mods mentioned in the error above. No idea why its showing up but when I attempt to install SL Framework ingame nothing happens.

[pornspree25]

Hello. I am a little new to modding and could really use some help. I've been trying to get sex lab to work properly for over a week now, but I am really at my wits end. I have all of the framework and requirements installed. I have FNIS and bodyslide installed. I managed to get rid of all of the crashes and all the warnings in fnis. All of the animations are loaded through the sl animation loader and sexlab is installed. I start the game and everything runs perfect, but when it comes to start a scene, nothing happens. I've tried it in many different ways, the dialog just ends and everything continues on as if nothing happened at all. I tried using naked defeat and the character gets stripped and the struggle meter comes up, but I get the notification that nobody is around to take advantage. I feel like i've tried just about everything and am going crazy here. Has anyone ever run into a similar problem?

[Asgir546]

On 7/12/2024 at 6:48 AM, necessarytrash said:

Is there a way to reset SexLabs so I can go through the in-game install process again? I'm getting an issue where my SexLab Registry folder is empty and I have 0 animations when I go to MCM Sexlab>Debug. I've tried reinstalling Sexlabs, as well as rerunning FNIS but have had no success. I've been getting a related error whenever I run the game.

Same issue. Is that caused by Nemesis? I've just done a clean install and used Nemesis instead of FNIS.

 

EDIT: caused by Sexlab p+. Disable it and it should be fine.

Edited July 13, 2024 by Heorlasgir

[4nk8r]

18 hours ago, Heorlasgir said:

Same issue. Is that caused by Nemesis? I've just done a clean install and used Nemesis instead of FNIS.

 

EDIT: caused by Sexlab p+. Disable it and it should be fine.

Sexlab p+ doesn't use SLAL or SLAL formatted animations.  You need to use the Automated.SLSB.Conversions file from the Sexlab p+ download page.  You also need the original SLAL animation packs installed as well.

Edited July 14, 2024 by 4nk8r

[tonitrulupus]

I hope you can help me on this one, This had only started on this last update of skyrim ae (1170) and the latest of the sexlabs, this doe not happen any other time but when a sexlab animation is starting, some one will start a dialog with the pc and the game pad will stop functioning, cant open any menus, cant load a save, nothing works, after testing a little, un able to move my PC with the keyboard as well, I can however open and load a saved game. any clues on what to do to fix this issue, like I stated this only happens if someone opens a dialog with the PC at the beginning of or during sex scenes. If a lose out of the dialog, sometimes it will not disable functions.

[tonitrulupus]

7 hours ago, tonitrulupus said:

I hope you can help me on this one, This had only started on this last update of skyrim ae (1170) and the latest of the sexlabs, this doe not happen any other time but when a sexlab animation is starting, some one will start a dialog with the pc and the game pad will stop functioning, cant open any menus, cant load a save, nothing works, after testing a little, un able to move my PC with the keyboard as well, I can however open and load a saved game. any clues on what to do to fix this issue, like I stated this only happens if someone opens a dialog with the PC at the beginning of or during sex scenes. If a lose out of the dialog, sometimes it will not disable functions.

I think I may have an idea whats going on just going to need to test

 

[Kokopizza]

I keep having this issue when running FNIS after installing the framework:

 

Reading FNISBase V7.6 ... 
>>Warning: \character\behaviors\FNIS_SexLabCreature_Behavior.hkx not Skyrim compatible<<
Reading SexLabCreature V1.63 ... 
>>Warning: \character\behaviors\FNIS_SexLabAP_Behavior.hkx not Skyrim compatible<<
Reading SexLabAP V1.63 ... 
>>Warning: \character\behaviors\FNIS_SexLab_Behavior.hkx not Skyrim compatible<<
Reading SexLab V1.63 ... 
>>Warning: \character\behaviors\FNIS_MiasLair_Behavior.hkx not Skyrim compatible<<
Reading MiasLair V7.0 ... 

All Anim Lists scanned. Generating Behavior Files....
No GENDER directory male
No GENDER directory female

 

Not sure how to fix, I have all the framework requirements. I downgraded to the pre anniversary edition if that helps, I have tried deleting and reinstalling mia's and the sexlab framework but it does not seem to fix it. 

Edited July 16, 2024 by Kokopizza

[PippinTom]

4 hours ago, Kokopizza said:

.hkx not Skyrim compatible

 

You either have wrong version of FNIS or you are in the wrong topic entirely - this one is about Skyrim SE not "just" Skyrim (which would mean LE)

[UsernameTaken666]

8 minutes ago, PippinTom said:

 

You either have wrong version of FNIS or you are in the wrong topic entirely - this one is about Skyrim SE not "just" Skyrim (which would mean LE)

Or they fucking downloaded LE animation files. 

[Kokopizza]

4 hours ago, UsernameTaken666 said:

Or they fucking downloaded LE animation files. 

The only animation files I downloaded were for the sexlab animation framework for special edition and sex slaves for the special edition. 

[PippinTom]

Yet one downloaded wrong version of FNIS... it's kinda waste of time trying to point one in the right direction, oh well.

[andwj]

All mod requierments is updated, got skyrim version 1..6.1170 Special Edition, I downloaded SexLabFrameworkAE_v166b.7z  but get instant failmessage from SKSE plugin Loader about those 2; Papyrus-Sexlabutil.ddl files is incompattible during load. I dont get what to do. Whats with these 2 files and what am I to do with them!? Should i physically move them somewhere? they are in their own SKSE/Plugin folder that they come in so I dont get the failmessage.

[TerrinTespa8Despot]

I have the ostim NSFW mods list and am trying to download the latest version of sexlab framework for AE but it keeps crashing out whenever I load any save or new game which mods could be causing this?

[GenPublic]

On 7/12/2024 at 11:08 AM, Night Driver said:

Well, my final clue is that in debug mode, i get two messages in the console whenever I try and start an animation.

Sexlab - fatal - thread[1] addactor(lydia) - failed to add actor - they are not a valid target for animation
Sexlab - notice - startsex() - failed to add some actors to thread

This is not a lydia specific problem as it happens with any female actor. Not sure what to do now, my xpmsse is up to date so I'm not sure what's ruling out lydia and others

 

Same thing happens to me with every actor, sort of.  Here is what the Sexlab debugger says in the console when I try to use Matchmaker on the player-character:

 

ValidateActor(Nameofplayercharacter) -- FALSE -- They cannot be animated

 

Attempting to use Matchmaker on a nearby ghost:

 

ValidateActor(ghost) -- FALSE -- They cannot be animated

 

I'm at wits end, having reinstalled SexlabFrameworkAE_v166b on my Skyrim 1.6.1170 multiple times, as well as Jcontainers SE and PapyrusUtil AE SE.  GenerateFNIS throws a warning that I'm not using a legit Steam install folder, but Sexlab worked fine before.

 

Obnoxiously for Crashlogger, this is not a CTD, so the crashlogger doesn't generate a crash report for more detailed information on why Sexlab is giving FALSE for any actor I attempt to animate using Sexlab.

 

Slowly working my way through uninstalling mods that I may have installed after Sexlab to see which one is causing the issue.

[OsmelMC]

8 hours ago, TerrinTespa8Despot said:

I have the ostim NSFW mods list and am trying to download the latest version of sexlab framework for AE but it keeps crashing out whenever I load any save or new game which mods could be causing this?

The CTD of SexLab on load are usually related with FNIS. Make sure of run FNIS for User's after install, update or uninstall any Mod with animations.

 

But can be caused by another Mod in which case you should check the Crash Logs for clue's.

[Ookla]

I'm using SE the install button is lit up but nothing happens when I click on it.

[UsernameTaken666]

huh....that is weird..

[tinyowl]

21 hours ago, GenPublic said:

 

Same thing happens to me with every actor, sort of.  Here is what the Sexlab debugger says in the console when I try to use Matchmaker on the player-character:

 

ValidateActor(Nameofplayercharacter) -- FALSE -- They cannot be animated

 

Attempting to use Matchmaker on a nearby ghost:

 

ValidateActor(ghost) -- FALSE -- They cannot be animated

 

I'm at wits end, having reinstalled SexlabFrameworkAE_v166b on my Skyrim 1.6.1170 multiple times, as well as Jcontainers SE and PapyrusUtil AE SE.  GenerateFNIS throws a warning that I'm not using a legit Steam install folder, but Sexlab worked fine before.

 

Obnoxiously for Crashlogger, this is not a CTD, so the crashlogger doesn't generate a crash report for more detailed information on why Sexlab is giving FALSE for any actor I attempt to animate using Sexlab.

 

Slowly working my way through uninstalling mods that I may have installed after Sexlab to see which one is causing the issue.

I've got the exact same issue and I'm also going through all mods now