BringtheNoise Posted March 21, 2017 Posted March 21, 2017 Started a new game to test 1.04.... Nordhagen beach is completely empty (no settlers) again. Note: I came out of the vault went to sanctuary, then cqc over to atom cats and went up the coast.... the family that is usually there is gone. I'm wondering if it is because the location was not saved properly. PID's Fallout4.esm: Farm02Location "Nordhagen Beach" [LCTN:0009B1B5]Boston Breader.esp: BBMNordhagenBeachLocation "Nordhagen Beach" [LCTN:2000F2BE] Set with Farm02Location as the Parent... All of the other in game locations with settlers you have the esp modify the location... I'm going to tinker and rename that the NordHagen Beach in your BBMNordhagenBeachLocation to "Map Marker Nordhagen Beach" via FO4Edit and see if that fixes it (it should update all of the other items that call on that location, but with the in game name changed maybe just maybe fallout will quit shitting itself). ---Edit--- Changing the name of the location did not put the settlers back at nordhagen.
Nickolos1818 Posted March 22, 2017 Posted March 22, 2017 BBM05 Family Affairs. Quest started for me. ( I cleared the settlement and chose not to do any scrapping or building there for a few in game hours and left the settlement. Came back later and quest triggered for me.) Only issue is after the Chapel scene, Luna only paths back to the settlement halfway and stops. Also as reported above, Nordhagen Beach has no npc's. If I try to use the workbench there it says to clear the area of hostiles first no mater what I do. Stops minutemen quest for that settlement from being completed as well.
pepertje Posted March 27, 2017 Author Posted March 27, 2017 how do i activate quest 2 lurking in the dark? Head over to Somerville Place and talk to Don, he should trigger it. Preston should also be able to kick it off.
Leumas9969 Posted March 27, 2017 Posted March 27, 2017 Started a new character using version 1.0.4 BBM05: Quest started when Sunshine Tidings cleared and I moved to about 20m from shack. Once I spoke with Matthew, Jean took his place at the window. (probably just an NPC idle marker, but she seems to like it... ) Stage 130 displayed with quest target on Jean, stage did not complete when return, or attempt to talk with Jean. Talked with Matthew and progressed quest (140 complete, 130 displayed, 150 displayed) Stage 370 did not complete, waited approx 9 days. different locations, wait, sleep, fast traveled etc. Used setstage 380 to continue. Also, after quest was complete used the "Animal Friend" 'pacify' on Josh who became hostile when I holstered my weapon. (not sure if anything can be done or not just FYI) BBM03: Stage 90: Completed before reaching Fiddlers Green, I would say at the same location as last time, 1/2 way up the hill directly under the overpass south of Fiddlers Green. ( Does the stage advance via some kind of timer, or when entering the location radius?) Stages at FG completed while I was busy killing ghouls on the other side of the park.. Capt Bourne exits PA at Fiddlers and April exits PA at Nordhagen is this supposed to happen? (Are they being left for the player?) Others mentioned no settlers at Nordhagen I have seen this on both games. Did not think much of it the first time through. Figured they would be there when I returned. Stage 160: April begins running towards Bourne while I am still listening to her dialog. (wondering if adding a dialog option(s) where you can say "Lets go find her" etc. would then have April begin moving. [saved Here] Stage 190 (first time) I fast traveled to Watts as it was the closest discovered location, hoping to arrive ahead of April and create another save. Of course I fast traveled into a Rust Devil party and had barely made it across Tucker Memorial Bridge when I received a stage 190 completion, followed by a stage 210 completion. (second time) Reloaded Nordhagen save, Followed April doing a quick save between Medford Memorial and Taffington. April and Bourne converse. 190 completed. Spoke with bourne (close enough where dialog initiated directly after NPC conversation. "Lets do this" option. April and Bourne got stuck behind guard rail next to red pick-up. ( Damn AI / Navmeshing ) Waited then moved them both with modpos. Cleared TBH, Both April and Bourne on second floor by loot chest. I activate workbench, 210 does not complete. sqo shows both 210 and 220 as displayed. Can't talk with April or Bourne. (third time) Reloaded quick save. April and Bourne converse 190 completes. 200 Completed. April and Bourne do not move. I cleared TBH and activated workbench. 210 does not complete. 210 and 220 show displayed. Cant speak with either of them. (fourth time) Quit game, Start game and load quick save. same result as second pass with the exception of both walking over an random landmine and going down on their asses. (fifth time) Reloaded quick save, this time I stayed about 6 meters away from the conversation. 190 completed. Talk to Bourne displayed, Clear TBH completed (checked sqo 190 completed, 200 displayed, 210 completed, 220 displayed) Cannot speak with Bourne. (sixth time ) Rebooted computer, reloaded quick save. (checked sqo 190 displayed, 200 dormant, 210 dormant, 220 dormant). Again stayed 6 meters away from conversation. Meet April at TBH completed message displayed, Followed by 2 Talk to Bourne messages. (checked sqo again 190 completed, 200 displayed, 210 completed, 220 displayed) It seems to me that the quest stages 200 and 220 are triggering at the same time and that 220 is causing 210 to auto complete Hope this helps you.. Regards..
pepertje Posted March 27, 2017 Author Posted March 27, 2017 Started a new character using version 1.0.4 BBM05: Quest started when Sunshine Tidings cleared and I moved to about 20m from shack. Once I spoke with Matthew, Jean took his place at the window. (probably just an NPC idle marker, but she seems to like it... ) Stage 130 displayed with quest target on Jean, stage did not complete when return, or attempt to talk with Jean. Talked with Matthew and progressed quest (140 complete, 130 displayed, 150 displayed) Stage 370 did not complete, waited approx 9 days. different locations, wait, sleep, fast traveled etc. Used setstage 380 to continue. Also, after quest was complete used the "Animal Friend" 'pacify' on Josh who became hostile when I holstered my weapon. (not sure if anything can be done or not just FYI) BBM03: Stage 90: Completed before reaching Fiddlers Green, I would say at the same location as last time, 1/2 way up the hill directly under the overpass south of Fiddlers Green. ( Does the stage advance via some kind of timer, or when entering the location radius?) Stages at FG completed while I was busy killing ghouls on the other side of the park.. Capt Bourne exits PA at Fiddlers and April exits PA at Nordhagen is this supposed to happen? (Are they being left for the player?) Others mentioned no settlers at Nordhagen I have seen this on both games. Did not think much of it the first time through. Figured they would be there when I returned. Stage 160: April begins running towards Bourne while I am still listening to her dialog. (wondering if adding a dialog option(s) where you can say "Lets go find her" etc. would then have April begin moving. [saved Here] Stage 190 (first time) I fast traveled to Watts as it was the closest discovered location, hoping to arrive ahead of April and create another save. Of course I fast traveled into a Rust Devil party and had barely made it across Tucker Memorial Bridge when I received a stage 190 completion, followed by a stage 210 completion. (second time) Reloaded Nordhagen save, Followed April doing a quick save between Medford Memorial and Taffington. April and Bourne converse. 190 completed. Spoke with bourne (close enough where dialog initiated directly after NPC conversation. "Lets do this" option. April and Bourne got stuck behind guard rail next to red pick-up. ( Damn AI / Navmeshing ) Waited then moved them both with modpos. Cleared TBH, Both April and Bourne on second floor by loot chest. I activate workbench, 210 does not complete. sqo shows both 210 and 220 as displayed. Can't talk with April or Bourne. (third time) Reloaded quick save. April and Bourne converse 190 completes. 200 Completed. April and Bourne do not move. I cleared TBH and activated workbench. 210 does not complete. 210 and 220 show displayed. Cant speak with either of them. (fourth time) Quit game, Start game and load quick save. same result as second pass with the exception of both walking over an random landmine and going down on their asses. (fifth time) Reloaded quick save, this time I stayed about 6 meters away from the conversation. 190 completed. Talk to Bourne displayed, Clear TBH completed (checked sqo 190 completed, 200 displayed, 210 completed, 220 displayed) Cannot speak with Bourne. (sixth time ) Rebooted computer, reloaded quick save. (checked sqo 190 displayed, 200 dormant, 210 dormant, 220 dormant). Again stayed 6 meters away from conversation. Meet April at TBH completed message displayed, Followed by 2 Talk to Bourne messages. (checked sqo again 190 completed, 200 displayed, 210 completed, 220 displayed) It seems to me that the quest stages 200 and 220 are triggering at the same time and that 220 is causing 210 to auto complete Hope this helps you.. Regards.. I'll add 'em to the fix list
maxheat5 Posted March 28, 2017 Posted March 28, 2017 can anybody tell me where do i find jade as companion? i can't find her anywhere? where should i look?
wonderingpotato Posted March 28, 2017 Posted March 28, 2017 This has probably already being solved and I just haven't seen it. but can anyone help me make pickman visible and interactable again? Currently at quest stage 130, if that helps
pepertje Posted March 28, 2017 Author Posted March 28, 2017 can anybody tell me where do i find jade as companion? i can't find her anywhere? where should i look? Jade becomes available as a companion after completing the quest "The Green Devil", which starts automatically after completing "Doctor On Call", which starts as soon as you enter Faraday's Lab in Diamond City (the lab is where the Warehouse used to be.) This has probably already being solved and I just haven't seen it. but can anyone help me make pickman visible and interactable again? Currently at quest stage 130, if that helps The quest should enable him automatically, but if it doesn't you'll have to enable him once you're inside Pickman's Gallery. Use this command: "4ad4e.moveto player" followed up by "4ad4e.enable"
Anosaki Posted March 29, 2017 Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her!
pepertje Posted March 29, 2017 Author Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere.
Anosaki Posted March 29, 2017 Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets.
pepertje Posted March 29, 2017 Author Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on.
Anosaki Posted March 29, 2017 Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10
pepertje Posted March 29, 2017 Author Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her.
Anosaki Posted March 29, 2017 Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder.
pepertje Posted March 29, 2017 Author Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"?
Anosaki Posted March 29, 2017 Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something.
pepertje Posted March 29, 2017 Author Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky.
Anosaki Posted March 29, 2017 Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her....
pepertje Posted March 29, 2017 Author Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her.... This is Kimberly's RefID taken straight from the game. Replace the first two digits (in this case "12") with the load index number of Boston Breeder in your load order.
Anosaki Posted March 29, 2017 Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her.... This is Kimberly's RefID taken straight from the game. Replace the first two digits (in this case "12") with the load index number of Boston Breeder in your load order. I did that. I tried the load order number and the load index number, neither worked. Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her.... This is Kimberly's RefID taken straight from the game. Replace the first two digits (in this case "12") with the load index number of Boston Breeder in your load order. I did that. I tried the load order number and the load index number, neither worked. I see the problem You told me the 8 & 6 backwards Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her.... This is Kimberly's RefID taken straight from the game. Replace the first two digits (in this case "12") with the load index number of Boston Breeder in your load order. I did that. I tried the load order number and the load index number, neither worked. Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her.... This is Kimberly's RefID taken straight from the game. Replace the first two digits (in this case "12") with the load index number of Boston Breeder in your load order. I did that. I tried the load order number and the load index number, neither worked. I see the problem You told me the 8 & 6 backwards I found her, all is well, but it has also brought another issue to the forefront. I forgot I never got CBBE to work...My bodyslide studio won't ever work right Hmmm. Now she wants to help me kill raiders and just stands there.
pepertje Posted March 29, 2017 Author Posted March 29, 2017 Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her.... This is Kimberly's RefID taken straight from the game. Replace the first two digits (in this case "12") with the load index number of Boston Breeder in your load order. I did that. I tried the load order number and the load index number, neither worked. Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her.... This is Kimberly's RefID taken straight from the game. Replace the first two digits (in this case "12") with the load index number of Boston Breeder in your load order. I did that. I tried the load order number and the load index number, neither worked. I see the problem You told me the 8 & 6 backwards Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her.... This is Kimberly's RefID taken straight from the game. Replace the first two digits (in this case "12") with the load index number of Boston Breeder in your load order. I did that. I tried the load order number and the load index number, neither worked. Gahhh! Where the hell is Kimberly? I can't find her! Kimberly? She should be in Lexington. If you really can't find her (or if there's no quest target), use "movetoqt BBM01", see if that takes you anywhere. That didn't work. Was I supposed to get a quest from the mom? I spoke to her, she sent me to lexington but I have no quest or targets. Then you'll have to check the stage first. Use "GetStage BBM01". If it's returning a 0, it means something went wrong there. If that is the case, use "SetStage BBM01" to advance the quest. If it's already on 10, then I don't know what's going on. It's at 10 You have no objective displayed? Or did you not track the quest in your log? I'll look up in CK to get Kimberly's RefID so you can move yourself to her. The ID would be great, thanks! I don't have any new quest in my log at all pertaining to Boston breeder. Does it work if you use "SetObjectiveDisplayed BBM01 10 1"? Well, that command finally gave me the quest and a marker, but she isn't there. I even used TCL to see if she glitched through the wall or something. If there's a marker, use "movetoqt BBM01" to head straight to the marker, even if the marker can't show a path (if she's in a holding cell). Otherwise, it likely means she's set to a disabled state. Use the command "prid XX002860" (replace the XX's with the load index of Boston Breeder) to select her, then use "moveto player" and "enable", she should now stand right next to you. Do this while standing by the pool in Lexington to prevent the quest going wonky. The prid command isn't finding her.... This is Kimberly's RefID taken straight from the game. Replace the first two digits (in this case "12") with the load index number of Boston Breeder in your load order. I did that. I tried the load order number and the load index number, neither worked. I see the problem You told me the 8 & 6 backwards I found her, all is well, but it has also brought another issue to the forefront. I forgot I never got CBBE to work...My bodyslide studio won't ever work right Hmmm. Now she wants to help me kill raiders and just stands there. That's why you had to stand next to the pool. There should be a group of Raiders spawning there. If you're a way out, just take her somewhere with hostiles and make sure she starts fighting them. Once she's done fighting, it should get the quest to proceed.
Anosaki Posted March 29, 2017 Posted March 29, 2017 On 3/29/2017 at 6:10 PM, pepertje said: That's why you had to stand next to the pool. There should be a group of Raiders spawning there. If you're a way out, just take her somewhere with hostiles and make sure she starts fighting them. Once she's done fighting, it should get the quest to proceed. I'm on stage 30, She is leading me to Wodan right? She takes me to an alley with a truck and just stops.
Anosaki Posted March 29, 2017 Posted March 29, 2017 Well I finished that quest, now the Sommerville place one, I'm supposed to talk to don but everyone at the house just says to deal with a deathclaw.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now