Nooky monster Posted November 22, 2016 Posted November 22, 2016 @VirginMarie is it your voice in the shouts? I will never tell I have tried a wiped game fresh install and a fresh steam download.. even a new install from my game disk too... seems a hit/miss situation. But i know what you are saying. Are you just talking in general? I'm not understanding, from this post or you last one, if you still have a problem or not. Did starting a new game re-create the problem, or show that it works? Oh sorry i was replying to another comment re: my prob.
shencereys Posted November 23, 2016 Posted November 23, 2016 So I'm a little hesitant to bring it up, because this problem is so unusual but - I can't get SLAV to appear in MCM. I know all the usual culprits for this, so hear me out. First I installed SLAV in a new game. Worked great as far as I could tell - appeared in MCM, messages were firing off. Neat o. Then I had problems with a different mod and I had to start a new game after reinstalling a couple things and screwing with my load order some. Now SLAV isn't appearing any MCM menus, isn't firing off dialogs, basically doesn't exist. It's enabled in MO both in the left and right pane, and for good measure I uninstalled it / reinstalled it properly (FNIS/LOOT). I have all the dependencies, and I've played around with bumping it up and down the left pane in MO just in case my earlier tinkering had borked the load order. Starting a new game - it just won't appear in MCM anymore. I can give it 5 minutes, 10 minutes, 30 minutes - just not happening. I've tried setstage SKI_ConfigManagerInstance 1, tried turning off and on a few mods, downloading and reinstalling the archive in case it was corrupted, even tried REVERTING the change I made initially so the game was in the precise same state it was before this all started happening. Nothing will make it start. Here's where (at least to me) it gets weird. If I load the original game prior to any of my tinkering (in both the pre-and-post tinker states), the mod is magically working again. W...T...F I'd post a load order / modlist here but seeing as how no amount of load ordering or disabling/enabling mods seems to help, I feel the problem lies elsewhere. Thanks in advance.
VirginMarie Posted November 23, 2016 Author Posted November 23, 2016 So I'm a little hesitant to bring it up, because this problem is so unusual but - I can't get SLAV to appear in MCM. I know all the usual culprits for this, so hear me out. First I installed SLAV in a new game. Worked great as far as I could tell - appeared in MCM, messages were firing off. Neat o. Then I had problems with a different mod and I had to start a new game after reinstalling a couple things and screwing with my load order some. Now SLAV isn't appearing any MCM menus, isn't firing off dialogs, basically doesn't exist. It's enabled in MO both in the left and right pane, and for good measure I uninstalled it / reinstalled it properly (FNIS/LOOT). I have all the dependencies, and I've played around with bumping it up and down the left pane in MO just in case my earlier tinkering had borked the load order. Starting a new game - it just won't appear in MCM anymore. I can give it 5 minutes, 10 minutes, 30 minutes - just not happening. I've tried setstage SKI_ConfigManagerInstance 1, tried turning off and on a few mods, downloading and reinstalling the archive in case it was corrupted, even tried REVERTING the change I made initially so the game was in the precise same state it was before this all started happening. Nothing will make it start. Here's where (at least to me) it gets weird. If I load the original game prior to any of my tinkering (in both the pre-and-post tinker states), the mod is magically working again. W...T...F I'd post a load order / modlist here but seeing as how no amount of load ordering or disabling/enabling mods seems to help, I feel the problem lies elsewhere. Thanks in advance. I'd like to see a papyrus log. How to get one is in the FAQs in case you need info. The log should be the result of... Startup the game - start new game - just wait a minute for startup stuff to complete - exit to desktop - grab that latest log - attach here not cut and paste Also indicate what versions are you running for these.. Devious Devices Integration Devious Devices Assets This Mod
shencereys Posted November 23, 2016 Posted November 23, 2016 So I'm a little hesitant to bring it up, because this problem is so unusual but - I can't get SLAV to appear in MCM. I know all the usual culprits for this, so hear me out. First I installed SLAV in a new game. Worked great as far as I could tell - appeared in MCM, messages were firing off. Neat o. Then I had problems with a different mod and I had to start a new game after reinstalling a couple things and screwing with my load order some. Now SLAV isn't appearing any MCM menus, isn't firing off dialogs, basically doesn't exist. It's enabled in MO both in the left and right pane, and for good measure I uninstalled it / reinstalled it properly (FNIS/LOOT). I have all the dependencies, and I've played around with bumping it up and down the left pane in MO just in case my earlier tinkering had borked the load order. Starting a new game - it just won't appear in MCM anymore. I can give it 5 minutes, 10 minutes, 30 minutes - just not happening. I've tried setstage SKI_ConfigManagerInstance 1, tried turning off and on a few mods, downloading and reinstalling the archive in case it was corrupted, even tried REVERTING the change I made initially so the game was in the precise same state it was before this all started happening. Nothing will make it start. Here's where (at least to me) it gets weird. If I load the original game prior to any of my tinkering (in both the pre-and-post tinker states), the mod is magically working again. W...T...F I'd post a load order / modlist here but seeing as how no amount of load ordering or disabling/enabling mods seems to help, I feel the problem lies elsewhere. Thanks in advance. I'd like to see a papyrus log. How to get one is in the FAQs in case you need info. The log should be the result of... Startup the game - start new game - just wait a minute for startup stuff to complete - exit to desktop - grab that latest log - attach here not cut and paste Also indicate what versions are you running for these.. Devious Devices Integration Devious Devices Assets This Mod Wow that was quite the fast response. I will take care of that and post my reply here a bit later tonight.
shencereys Posted November 23, 2016 Posted November 23, 2016 So I'm a little hesitant to bring it up, because this problem is so unusual but - I can't get SLAV to appear in MCM. I know all the usual culprits for this, so hear me out. First I installed SLAV in a new game. Worked great as far as I could tell - appeared in MCM, messages were firing off. Neat o. Then I had problems with a different mod and I had to start a new game after reinstalling a couple things and screwing with my load order some. Now SLAV isn't appearing any MCM menus, isn't firing off dialogs, basically doesn't exist. It's enabled in MO both in the left and right pane, and for good measure I uninstalled it / reinstalled it properly (FNIS/LOOT). I have all the dependencies, and I've played around with bumping it up and down the left pane in MO just in case my earlier tinkering had borked the load order. Starting a new game - it just won't appear in MCM anymore. I can give it 5 minutes, 10 minutes, 30 minutes - just not happening. I've tried setstage SKI_ConfigManagerInstance 1, tried turning off and on a few mods, downloading and reinstalling the archive in case it was corrupted, even tried REVERTING the change I made initially so the game was in the precise same state it was before this all started happening. Nothing will make it start. Here's where (at least to me) it gets weird. If I load the original game prior to any of my tinkering (in both the pre-and-post tinker states), the mod is magically working again. W...T...F I'd post a load order / modlist here but seeing as how no amount of load ordering or disabling/enabling mods seems to help, I feel the problem lies elsewhere. Thanks in advance. I'd like to see a papyrus log. How to get one is in the FAQs in case you need info. The log should be the result of... Startup the game - start new game - just wait a minute for startup stuff to complete - exit to desktop - grab that latest log - attach here not cut and paste Also indicate what versions are you running for these.. Devious Devices Integration Devious Devices Assets This Mod Naturally now that the mechanic is on the phone the car starts working properly again. Started a new game, and after giving everything time to load the SLAV MCM menu appeared just like it should. I'd read somewhere before that for some unknown reason sometimes mods that are having trouble showing up in MCM will appear if you load a save that has it active prior to starting a new game (which I did do) - although I have no idea if that's a real thing or just a myth. If it does it again at any time I'll have some papyrus for you and will put them here. Thanks for being willing to work on it!
VirginMarie Posted November 23, 2016 Author Posted November 23, 2016 I'd like to see a papyrus log. How to get one is in the FAQs in case you need info. The log should be the result of... Startup the game - start new game - just wait a minute for startup stuff to complete - exit to desktop - grab that latest log - attach here not cut and paste Also indicate what versions are you running for these.. Devious Devices Integration Devious Devices Assets This Mod Naturally now that the mechanic is on the phone the car starts working properly again. Started a new game, and after giving everything time to load the SLAV MCM menu appeared just like it should. I'd read somewhere before that for some unknown reason sometimes mods that are having trouble showing up in MCM will appear if you load a save that has it active prior to starting a new game (which I did do) - although I have no idea if that's a real thing or just a myth. If it does it again at any time I'll have some papyrus for you and will put them here. Thanks for being willing to work on it! Glad you are back in business then What version of DDi are you using? The reason I was asking is because there have been some reports of DDi 3.3 having some troubles getting registered with MCM. And if there's no DDi, this mod can't function either. If you have it happen again, take note of whether or not DD is showing up in the MCM or not.
RJLbwb Posted November 24, 2016 Posted November 24, 2016 This is an interesting mod, some good ideas, but run threw Bleak Barrow twice? just no.
VirginMarie Posted November 24, 2016 Author Posted November 24, 2016 This is an interesting mod, some good ideas, but run threw Bleak Barrow twice? just no. What are you referring to? Got a random waterfall in there? (that's the only thing I can think of where this mod takes you to Bleak Barrow)
RJLbwb Posted November 24, 2016 Posted November 24, 2016 This is an interesting mod, some good ideas, but run threw Bleak Barrow twice? just no. What are you referring to? Got a random waterfall in there? (that's the only thing I can think of where this mod takes you to Bleak Barrow) To get to the waterfall you need to go threw the Bleak Barrow dungeon for the falls Dibella wants, that's were the quest arrow points, I didn't get to the falls, just can't be bothered to to the clear the same dungeon again on the same play threw. To activate the quest you need to have completed this dungeon first to be shown as the Last Dragonborn and Bleak Falls respawns. The issue I have is that it just breaks the flow of things and turns the game into the movie Ground Hog day.
VirginMarie Posted November 24, 2016 Author Posted November 24, 2016 This is an interesting mod, some good ideas, but run threw Bleak Barrow twice? just no. What are you referring to? Got a random waterfall in there? (that's the only thing I can think of where this mod takes you to Bleak Barrow) To get to the waterfall you need to go threw the Bleak Barrow dungeon for the falls Dibella wants, that's were the quest arrow points, I didn't get to the falls, just can't be bothered to to the clear the same dungeon again on the same play threw. To activate the quest you need to have completed this dungeon first to be shown as the Last Dragonborn and Bleak Falls respawns. The issue I have is that it just breaks the flow of things and turns the game into the movie Ground Hog day. Waterfalls are assigned randomly. If you were to load the save before Dibella gave you the message, you'd almost certainly start with a different one. There's 20. Of course eventually that one is going to come up. Now that said I agree this was a dumb location I picked. But I will make a deal with you. If you enter the contest, and get yourself a waterfall of your own with your name on it, I will replace this one with yours
Mikey-likes-it Posted November 24, 2016 Posted November 24, 2016 omg animating plug? is that the teaser? i read this in your future release notes spoiler. when?
VirginMarie Posted November 25, 2016 Author Posted November 25, 2016 omg animating plug? is that the teaser? i read this in your future release notes spoiler. when? As soon as it's ready Maybe a week
Kryzhal Posted November 25, 2016 Posted November 25, 2016 bodyslide doesnt work because the files are osp and not XMl bodyslide doesnt work because the files are osp and not XMl
VirginMarie Posted November 25, 2016 Author Posted November 25, 2016 bodyslide doesnt work because the files are osp and not XMl bodyslide doesnt work because the files are osp and not XMl osp is the new much better format. My guess is you are using an outdated version of Bodyslide. See FAQ #11 for more info. Let me know if you need more help.
asdfa93 Posted November 26, 2016 Posted November 26, 2016 Hi I have a little issue with Cassia. She keeps following me and asking the same question.
VirginMarie Posted November 26, 2016 Author Posted November 26, 2016 Hi I have a little issue with Cassia. She keeps following me and asking the same question. Which question? Which answer are you choosing?
lightbulb Posted November 27, 2016 Posted November 27, 2016 I have a problem. I shout to awaken the gods, but Cassia does not give me the warning letter. Also, is she supposed to have devices on, if so, she does not. So then, I just gave my self the letter and the quest starts. I read it, then when I shout, nothing happens. Tried to fast travel and go into buildings then shout but nothing happens. The only way Nocturnal shows up is if I use the reset option in the MCM. After that, I feel so close! Then I press E on her and it says she is busy. She just does nothing. I tried to disable then enable, kill and resurrect, resetai, and toggleai. She just stays busy. Sometimes she will follow me but that is about it. She is also intangible from attacks. I also reinstalled the mod. I don't know what to do, help.
VirginMarie Posted November 27, 2016 Author Posted November 27, 2016 I have a problem. I shout to awaken the gods, but Cassia does not give me the warning letter. Does she force greet you? Do you help her with her needs (it's a loving scene)? If not, any chance Sexlab has not fully installed yet thus this first loving scene cannot start? If yes that's your problem. Also, is she supposed to have devices on, if so, she does not. Yes but this can be normal... If Cassia shows up with no devices on, it's normal if you've just started the mod and 1or2 game hours have not yet past. There's a delay on equipping NPCs since Devious Devices needs time to be ready to support that. The following items are just noise since you are trying to hack start things. Most of this should not be expected to work. So then, I just gave my self the letter and the quest starts. I read it, then when I shout, nothing happens. Tried to fast travel and go into buildings then shout but nothing happens. Depending on what's happened before reading the letter, this method of trying to trigger may not work. The only way Nocturnal shows up is if I use the reset option in the MCM. Did you do something more to get her to show up as this does not sound possible? After that, I feel so close! Then I press E on her and it says she is busy. Normal. It starts with a scene, you cannot engage by talking to her. She just does nothing. I tried to disable then enable, kill and resurrect, resetai, and toggleai. She just stays busy. Normal Sometimes she will follow me but that is about it. She is also intangible from attacks. I also reinstalled the mod. I don't know what to do, help. Normal I need more info to really help... When you shout the first time do you see a notification "Your voice awakens the gods"? Have you started a new game, or are you using a save? What version of this mod are you using? Did you upgrade this mod, or using for the first time?
lightbulb Posted November 27, 2016 Posted November 27, 2016 I have a problem. I shout to awaken the gods, but Cassia does not give me the warning letter. Does she force greet you? Do you help her with her needs (it's a loving scene)? If not, any chance Sexlab has not fully installed yet thus this first loving scene cannot start? If yes that's your problem. She does force great most of the time. Sometimes I press E on her when she does not and I can select the "..." option to start the normal dialog. I have chosen to help her and not to. After both, the dialog does ends and nothing happens. I look at the trouble shooting section and everything seems right to me, FNIS detects "virgin", all checks in sexlab MCM, and I see ZAZ in the MCM as well. Also, is she supposed to have devices on, if so, she does not. Yes but this can be normal... If Cassia shows up with no devices on, it's normal if you've just started the mod and 1or2 game hours have not yet past. There's a delay on equipping NPCs since Devious Devices needs time to be ready to support that. Makes sense The following items are just noise since you are trying to hack start things. Most of this should not be expected to work. So then, I just gave my self the letter and the quest starts. I read it, then when I shout, nothing happens. Tried to fast travel and go into buildings then shout but nothing happens. Depending on what's happened before reading the letter, this method of trying to trigger may not work. The only way Nocturnal shows up is if I use the reset option in the MCM. Did you do something more to get her to show up as this does not sound possible? After that, I feel so close! Then I press E on her and it says she is busy. Normal. It starts with a scene, you cannot engage by talking to her. That was what I thought it was supposed to be. She just does nothing. I tried to disable then enable, kill and resurrect, resetai, and toggleai. She just stays busy. Normal Sometimes she will follow me but that is about it. She is also intangible from attacks. I also reinstalled the mod. I don't know what to do, help. Normal I need more info to really help... 1. When you shout the first time do you see a notification "Your voice awakens the gods"? Yes 2. Have you started a new game, or are you using a save? This might be a problem, I had the mod in the beginning, but I was avoiding becoming the dragonborn for awhile. So the mod was not in use until at least 10+ hours of gameplay. So I figured it would be ok to update the mod (probably not) before I started to use it. 3. What version of this mod are you using? 3.02 4. Did you upgrade this mod, or using for the first time? Upgraded to the newest version then used for the first time used.
VirginMarie Posted November 27, 2016 Author Posted November 27, 2016 I have a problem. I shout to awaken the gods, but Cassia does not give me the warning letter. Does she force greet you? Do you help her with her needs (it's a loving scene)? If not, any chance Sexlab has not fully installed yet thus this first loving scene cannot start? If yes that's your problem. She does force great most of the time. Sometimes I press E on her when she does not and I can select the "..." option to start the normal dialog. I have chosen to help her and not to. After both, the dialog does ends and nothing happens. I look at the trouble shooting section and everything seems right to me, FNIS detects "virgin", all checks in sexlab MCM, and I see ZAZ in the MCM as well. I need more info to really help... 1. When you shout the first time do you see a notification "Your voice awakens the gods"? Yes 2. Have you started a new game, or are you using a save? This might be a problem, I had the mod in the beginning, but I was avoiding becoming the dragonborn for awhile. So the mod was not in use until at least 10+ hours of gameplay. So I figured it would be ok to update the mod (probably not) before I started to use it. 3. What version of this mod are you using? 3.02 4. Did you upgrade this mod, or using for the first time? Upgraded to the newest version then used for the first time used. Upgrading the mod is fine, so long as you upgraded from something 2.0+. If you upgraded from something older you will be very broken unless you start a new game, or do the not so recommended risky clean save thing. If that's not your problem, I believe you have just one problem. This... After both, the dialog does ends and nothing happens The option to "help with needs" must result in a loving scene or you are not going to progress. If this is not occurring, this points to a sexlab install problem. In game, check that Sexlab is happy... in it's MCM, last tab, look under System Requirements. If anything is not listed as OK, you need to sort out why. Even if everything IS ok there, there's clearly an install problem or bad save, preventing that love scene. If you need further help, show me your papyrus log (help on how to get it is in the FAQs). And if you don't need further help, would love to hear how you fixed it in case it belongs in my help section so we can all learn something
lightbulb Posted November 27, 2016 Posted November 27, 2016 I have a problem. I shout to awaken the gods, but Cassia does not give me the warning letter. Does she force greet you? Do you help her with her needs (it's a loving scene)? If not, any chance Sexlab has not fully installed yet thus this first loving scene cannot start? If yes that's your problem. She does force great most of the time. Sometimes I press E on her when she does not and I can select the "..." option to start the normal dialog. I have chosen to help her and not to. After both, the dialog does ends and nothing happens. I look at the trouble shooting section and everything seems right to me, FNIS detects "virgin", all checks in sexlab MCM, and I see ZAZ in the MCM as well. I need more info to really help... 1. When you shout the first time do you see a notification "Your voice awakens the gods"? Yes 2. Have you started a new game, or are you using a save? This might be a problem, I had the mod in the beginning, but I was avoiding becoming the dragonborn for awhile. So the mod was not in use until at least 10+ hours of gameplay. So I figured it would be ok to update the mod (probably not) before I started to use it. 3. What version of this mod are you using? 3.02 4. Did you upgrade this mod, or using for the first time? Upgraded to the newest version then used for the first time used. Upgrading the mod is fine, so long as you upgraded from something 2.0+. If you upgraded from something older you will be very broken unless you start a new game, or do the not so recommended risky clean save thing. If that's not your problem, I believe you have just one problem. This... After both, the dialog does ends and nothing happens The option to "help with needs" must result in a loving scene or you are not going to progress. If this is not occurring, this points to a sexlab install problem. In game, check that Sexlab is happy... in it's MCM, last tab, look under System Requirements. If anything is not listed as OK, you need to sort out why. Even if everything IS ok there, there's clearly an install problem or bad save, preventing that love scene. If you need further help, show me your papyrus log (help on how to get it is in the FAQs). And if you don't need further help, would love to hear how you fixed it in case it belongs in my help section so we can all learn something Im not sure why it the scene wont start so...
VirginMarie Posted November 28, 2016 Author Posted November 28, 2016 Upgrading the mod is fine, so long as you upgraded from something 2.0+. If you upgraded from something older you will be very broken unless you start a new game, or do the not so recommended risky clean save thing. If that's not your problem, I believe you have just one problem. This... After both, the dialog does ends and nothing happens The option to "help with needs" must result in a loving scene or you are not going to progress. If this is not occurring, this points to a sexlab install problem. In game, check that Sexlab is happy... in it's MCM, last tab, look under System Requirements. If anything is not listed as OK, you need to sort out why. Even if everything IS ok there, there's clearly an install problem or bad save, preventing that love scene. If you need further help, show me your papyrus log (help on how to get it is in the FAQs). And if you don't need further help, would love to hear how you fixed it in case it belongs in my help section so we can all learn something Im not sure why it the scene wont start so... You did not tell me your upgrade situation. That's a key piece of info. Did you upgrade from something before 2.0? If yes there's no hope for your save. No need to look at the log to know It's broken. Your log has 800+ errors and 200+ warnings, in the span of just over one minute, so its all startup. I don't think you've given me a log covering an attempt to talk with Cassia. But its a mute point, read on. You can see for example... [11/27/2016 - 06:00:29PM] Cannot open store for class "fnissmquestscript", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "fnissmconfigmenu", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "follower3dnpc", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "zmErstarPriestScript", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "kzyEntangleScript", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "procconfigmcm", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "procevaluator", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "sfl_rng_script", missing file? These missing files are likely mods you've removed but are still orphaned in your save. But of course this cannot be all cases, for example surely you have FNIS running. FNIS could be part of why the first scene can't start. Never remove mods, or change your sort order mid-play through. That's how you eventually corrupt your save, and it would appear that something like that is what has happened. You can add mods, end of load order only. So this save is toast. You have a huge stack dump starting with.... [11/27/2016 - 06:01:52PM] Suspended stack count is over our warning threshold, dumping stacks: [11/27/2016 - 06:01:52PM] VM is freezing... [11/27/2016 - 06:01:52PM] VM is frozen [11/27/2016 - 06:01:52PM] Dumping stack 4225976: [11/27/2016 - 06:01:52PM] Frame count: 0 (Page count: 0) [11/27/2016 - 06:01:52PM] State: Waiting on other stack for call (Freeze state: Freezing) [11/27/2016 - 06:01:52PM] Type: Normal [11/27/2016 - 06:01:52PM] Return register: None [11/27/2016 - 06:01:52PM] Has stack callback: No [11/27/2016 - 06:01:52PM] Stack trace: [11/27/2016 - 06:01:52PM] [zadConfigQuest (0C01A282)].zadconfig.OnConfigManagerReady() - (requested call) [11/27/2016 - 06:01:52PM] [param 0]: "SKICP_configManagerReady" [11/27/2016 - 06:01:52PM] [param 1]: "" [11/27/2016 - 06:01:52PM] [param 2]: 0.000000 [11/27/2016 - 06:01:52PM] [param 3]: [SKI_ConfigManager <SKI_ConfigManagerInstance (54000802)>] This is Devious Devices having a problem. Not due it's own fault, but due to your corrupt save. This is likely why Cassia was nekid. I don't know if that first scene is prevented by DD problems but it really does not matter, nothing much is going to work anyhow using this save. I see lots of errors with SD+ having trouble. I see no errors/issues with Shout Like a Virgin. But you've given me a very small piece of time. Virgin can be seen initializing/upgrading, but that's it. You need a clean slate. Make sure you've got the right load order (use Loot for example), and start a new game. Then see what happens when you reach the point of meeting Cassia. If you still have problems using a new game, then it will be possible to pin point why.
lightbulb Posted November 28, 2016 Posted November 28, 2016 Upgrading the mod is fine, so long as you upgraded from something 2.0+. If you upgraded from something older you will be very broken unless you start a new game, or do the not so recommended risky clean save thing. If that's not your problem, I believe you have just one problem. This... After both, the dialog does ends and nothing happens The option to "help with needs" must result in a loving scene or you are not going to progress. If this is not occurring, this points to a sexlab install problem. In game, check that Sexlab is happy... in it's MCM, last tab, look under System Requirements. If anything is not listed as OK, you need to sort out why. Even if everything IS ok there, there's clearly an install problem or bad save, preventing that love scene. If you need further help, show me your papyrus log (help on how to get it is in the FAQs). And if you don't need further help, would love to hear how you fixed it in case it belongs in my help section so we can all learn something Im not sure why it the scene wont start so... You did not tell me your upgrade situation. That's a key piece of info. Did you upgrade from something before 2.0? If yes there's no hope for your save. No need to look at the log to know It's broken. Your log has 800+ errors and 200+ warnings, in the span of just over one minute, so its all startup. I don't think you've given me a log covering an attempt to talk with Cassia. But its a mute point, read on. You can see for example... [11/27/2016 - 06:00:29PM] Cannot open store for class "fnissmquestscript", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "fnissmconfigmenu", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "follower3dnpc", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "zmErstarPriestScript", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "kzyEntangleScript", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "procconfigmcm", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "procevaluator", missing file? [11/27/2016 - 06:00:29PM] Cannot open store for class "sfl_rng_script", missing file? These missing files are likely mods you've removed but are still orphaned in your save. But of course this cannot be all cases, for example surely you have FNIS running. FNIS could be part of why the first scene can't start. Never remove mods, or change your sort order mid-play through. That's how you eventually corrupt your save, and it would appear that something like that is what has happened. You can add mods, end of load order only. So this save is toast. You have a huge stack dump starting with.... [11/27/2016 - 06:01:52PM] Suspended stack count is over our warning threshold, dumping stacks: [11/27/2016 - 06:01:52PM] VM is freezing... [11/27/2016 - 06:01:52PM] VM is frozen [11/27/2016 - 06:01:52PM] Dumping stack 4225976: [11/27/2016 - 06:01:52PM] Frame count: 0 (Page count: 0) [11/27/2016 - 06:01:52PM] State: Waiting on other stack for call (Freeze state: Freezing) [11/27/2016 - 06:01:52PM] Type: Normal [11/27/2016 - 06:01:52PM] Return register: None [11/27/2016 - 06:01:52PM] Has stack callback: No [11/27/2016 - 06:01:52PM] Stack trace: [11/27/2016 - 06:01:52PM] [zadConfigQuest (0C01A282)].zadconfig.OnConfigManagerReady() - (requested call) [11/27/2016 - 06:01:52PM] [param 0]: "SKICP_configManagerReady" [11/27/2016 - 06:01:52PM] [param 1]: "" [11/27/2016 - 06:01:52PM] [param 2]: 0.000000 [11/27/2016 - 06:01:52PM] [param 3]: [SKI_ConfigManager <SKI_ConfigManagerInstance (54000802)>] This is Devious Devices having a problem. Not due it's own fault, but due to your corrupt save. This is likely why Cassia was nekid. I don't know if that first scene is prevented by DD problems but it really does not matter, nothing much is going to work anyhow using this save. I see lots of errors with SD+ having trouble. I see no errors/issues with Shout Like a Virgin. But you've given me a very small piece of time. Virgin can be seen initializing/upgrading, but that's it. You need a clean slate. Make sure you've got the right load order (use Loot for example), and start a new game. Then see what happens when you reach the point of meeting Cassia. If you still have problems using a new game, then it will be possible to pin point why. Yeah I figured this would be the case. I am very bad at keeping my mod list static. I may or may not create another save and test it. Thanks anyway.
VirginMarie Posted November 29, 2016 Author Posted November 29, 2016 This has one or two plugs that move in and out, if VirginMarie is intrested and can get permission. Teaser for next release... Got permission, added effects for it, retextured to match, and tied into story. *tries to look innocent*. There's actually 3 new devices if you can spot them.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now