Bodyslide CB++ v0.9.5 (35 extra sliders for CBBE) + outfit support

[stuffed_bunny]

If anyone like to try out Dragonfly's Tender BBP... there is CB++ support for it.

 

Note: TBBP is a WIP, and not compatible with existing BBP animations.

 

___________

 

Does anyone know the link for CB++ CalArmor I thought it was in the Bodyslide Armor and Clothes List (Calientes Vanilla Outfits for CBBE)but it keeps saying failure to save bodies help plz.

If correctly installed it should work. Can you open preview window for any "CB++ CalArmor" set? If you can, they will probably work just fine. The failure message pops up if there's any source nif missing, even when all the other sets install correctly.

[Guest]

I am having a problem with the "Breast Gravity" slider on the CB++ body... it is no longer working. What I mean is - the slider exists, and I can alter the percentage box or the slider position, but the preview body does not change - all the other sliders cause a change to the preview. I have not tested in game to see if it is a problem with the slider, or with the preview. (edit: now tested in game... changes to breast gravity without preview changes = no change in body shape in game)

More info:

I reinstalled recently (from a saved zip) and added the new ported outfit updates. When the slider failed, I tried a clean re-install with fresh downloads from here, but breast gravity slider still doesn't work. I do not have an older version to install so....

 

At this point I assume I did something wrong. Hope you can help, since I use this slider a lot.

 

Edit: Searching through the shape data folder, I discovered that the breastgravity.bsd is missing from CB++ Body 0.85 Caliente Body although it is present in the NeverNude and other body sets. I copy/pasted/renamed one of those and -- oops, slider became active, but totally screwy changes -- those obviously are not the same bsd files with different names.

[stuffed_bunny]

I am having a problem with the "Breast Gravity" slider on the CB++ body...

Edit: Searching through the shape data folder' date=' I discovered that the breastgravity.bsd is missing from CB++ Body 0.85 Caliente Body although it is present in the NeverNude and other body sets. I copy/pasted/renamed one of those and -- oops, slider became active, but totally screwy changes -- those obviously are not the same bsd files with different names.

[/quote']

BreastGravity is not included with CB++ because it shouldn't be. It comes with Bodyslide 1.4, which BTW is listed as a requirement for CB++. Get Bodyslide 1.4 and try again.

[Guest]

@stuffedbunny; thanks... my mistake, I loaded up the wrong version from my mass of zips -- color me embarrassed. Should have realized it myself when it worked before. all is good now.

[panthaman42]

This is fantastic! Now Skyrim has curves! Wonderful voluptuous curves! Thank you SO much!

 

Thank you Caliente for CBBE!

Thank you THANK YOU Stuffed Bunny for more curve creating sliders!

[VadersApp]

This is fantastic! Now Skyrim has curves! Wonderful voluptuous curves! Thank you SO much!

 

Thank you Caliente for CBBE!

Thank you THANK YOU Stuffed Bunny for more curve creating sliders!

 

Try my mod Realistic Body System. Every female npc will have curves. It gives to female NPCs 30 different bodytypes + fitting armor/clothes done with BodySlide (yeah!).

 

Download it here: http://skyrim.nexusmods.com/mods/23311/

[Kapten-N]

How about making a pregnancy slider? I've looked all over for one but been unable to find any. I really thought someone would have made one by now. :/

One slider for size would be enough, but with two or more sliders we would have more control over the shape of the belly.

 

I would make one myself, but I don't have the skill or know how to do it. I tried to follow Caliente's tutorial on adapting a dress to work with BodySlider, but I couldn't even get that right, even though I followed it step by step.

 

BTW, are there plans to make the CB++ outfits support the experimental sliders?

[stuffed_bunny]

How about making a pregnancy slider? I've looked all over for one but been unable to find any. I really thought someone would have made one by now. :/

 

BTW' date=' are there plans to make the CB++ outfits support the experimental sliders?

[/quote']

Yes, next version, but that could take a couple of weeks. Some of those shapes need some tweakin, and I'd really like to make a better mapping source for my slider creation script. Mapping outfits to the body is not good enough.

 

As for pregnancy, there are three problems:

1. How much jaggedness and sharp edges will a player accept? It is a low-resolution mesh after all.

2. You need a good pregnancy mod. Where is it?

3. It would work best with in-game bodyslider support, and AFAIK Bethesda has not made that possible for modders to add. Without this you have two options:

a) static bodysizes, with weightslider growing only the belly

weightslider as usual, with belly growing in stages (one mesh pair for each stage)... actually this option is not that bad...

 

And of course you need outfit support too. Something like this (but not random): http://www.loverslab.com/showthread.php?tid=11382

[Guest Jenova23]

I have 2 questions.

 

1. Do the Scale Skeletons effect cloths because I tried time and time again and it only effects the nude body unless I did something wrong?

 

2. How do I edit this body shape in bodyslide I tried but nothing works RBBB - RobidyBobidys Bigger Body using CHSBHC base

[gamerdave69]

Hey all, long time listener first time caller.

 

I read that there is a preset for TSAG and Numenume bodys somewhere but cannot find it in the latest CB++ downloads. If anyone can point me to where it should be it would be appreciated.

 

 

btw, to the poster above asking about skeletons affecting armor it is my understanding that the skeleton affects the armor as long as it is loaded after the armor. Anecdotally, this seems to be true for me. hope this helps.

[gamerdave69]

NM, found it here

 

http://www.loverslab.com/archive/index.php?thread-11463-1.html

[Kapten-N]

As for pregnancy' date=' there are three problems:

1. How much jaggedness and sharp edges will a player accept? It is a low-resolution mesh after all.

2. You need a good pregnancy mod. Where is it?

3. It would work best with in-game bodyslider support, and AFAIK Bethesda has not made that possible for modders to add. Without this you have two options:

a) static bodysizes, with weightslider growing only the belly

weightslider as usual, with belly growing in stages (one mesh pair for each stage)... actually this option is not that bad...

 

And of course you need outfit support too. Something like this (but not random): http://www.loverslab.com/showthread.php?tid=11382

[/quote']

I disagree on point two. You don't need a pregnancy mod. I know of at least two mods that give NPCs their own body meshes. With the technique used in those mods you could create a specific NPC which is supposed to be pregnant. Also, already having a mesh with a pregnancy slider might help encourage the creation of a good pregnancy mod.

(Most of all I just really want to see my in-game wife Muiri with a pregnant belly if I so have to use console commands to make it happen.)

About the jaggedness, isn't it possible to add more vertices or would that screw things up?

 

 

I'm going to look into how the Realistic Body System mod is made, because I'm interested in making a mod that gives slightly diffrent female body shapes to the diffrent races. For example I'd make nords more muscular than the others and give redguards bigger butts.

[loverslab987]

These additional sliders really add a TON of customization to the game. Great, stuffed_bunny! I also like, that Killer Keos replacer is supported, so that you can actually wear something with these bodyshapes. Are there any plans for adding more unique outfits from the nexus to the list of supported mods?

 

Of course, also armors from the CHSBHC armors and clothes (123check) or Alan's huge pack would be nice.

[cold steel]

Guys, I created (using CB + +) body and changed femalebody_1 in 3dmax. Both bodies femalebody_0 and femalebody_1 initially have different vectors. After the export of my body in the game, it appears fine until you change the weight, then the body breaks down. Is there any way in the CB + + to create femalebody_0 with one vectors and femalebody_1 with the same vectors?

P.S. sorry for my bad english.

[stuffed_bunny]

I disagree on point two. You don't need a pregnancy mod. I know of at least two mods that give NPCs their own body meshes. With the technique used in those mods you could create a specific NPC which is supposed to be pregnant.

Yes' date=' "The Spice of Life" ( http://skyrim.nexusmods.com/mods/16668 ) does that. Perhaps try it for Muiri with http://www.loverslab.com/showthread.php?tid=10780 ?

 

About the jaggedness, isn't it possible to add more vertices or would that screw things up?

It would work better with a higher-res mesh. I've had a couple of tries at making one, but the last one remains an unfinished WIP. Caliente sort of offered to help out by releasing a higher-res conversion of the original Zbrush mesh, which would obviously be a more accurate base than my multires conversions in Blender. Unfortunately I heard nothing more since, so that project is stalled for now...

 

I'm going to look into how the Realistic Body System mod is made' date=' because I'm interested in making a mod that gives slightly diffrent female body shapes to the diffrent races. For example I'd make nords more muscular than the others and give redguards bigger butts.

[/quote']

For body-by-race this might work better: Unique Everything ( http://skyrim.nexusmods.com/mods/16964 ).

 

_____

 

Guys' date=' I created (using CB + +) body and changed femalebody_1 in 3dmax. Both bodies femalebody_0 and femalebody_1 initially have different vectors. After the export of my body in the game, it appears fine until you change the weight, then the body breaks down. Is there any way in the CB + + to create femalebody_0 with one vectors and femalebody_1 with the same vectors?

[/quote']

Vectors? Do you mean vertices? What are you trying to do?

 

If the in-game weight slider only works at 0 and 100, it means the two nifs are not compatible. Bodyslide could never cause that. But from what I heard, importing/exporting a nif through 3ds max could break things in every possible way.

[stuffed_bunny]

A preview of v0.9 is available. Note: this is only a preview. The sharp version should have better underwear/outfit sliders, and complete outfit support will follow very shortly after posting it.

 

Better sliders... how?

Well, I'm working on a new source for slider conversion. It will be a combination of the body + some outfit parts (starting with a dress), with (mostly) hand-made sliders.

 

It remains to be seen if this will have any effect on clipping. It should however greatly reduce any unwanted warping of outfits, especially noticable on skirts, cloaks, and between/below the breasts.

 

Wish me luck!

 

Edit: I have been thinking there's something to CB++, and that's good presets. If anyone have a really good preset they want to share, please do so, preferably named as your LL profile. Then I could start assembling a presets package. Here's a start (since we all love butts and boobs):

[Guest]

...

Edit: I have been thinking there's something to CB++, and that's good presets. If anyone have a really good preset they want to share, please do so, preferably named as your LL profile. Then I could start assembling a presets package. Here's a start (since we all love butts and boobs):

 

I have three or four I thought about sharing at Nexus, but due to the risk I have not done so. Good opportunity here.

How should we go about it ...

send xml files to your pm or something else?

[stuffed_bunny]

...

If anyone have a really good preset they want to share' date=' please do so, preferably named as your LL profile.

[/quote']

I have three or four I thought about sharing at Nexus, but due to the risk I have not done so. Good opportunity here.

How should we go about it ...

send xml files to your pm or something else?

It's probably best to just post them here, preferably with screenshots. That way everyone can give comment upon them before I include any.

[Akigawa]

On the CB++ outfits I'm having issues with the breast gravity slider (It causes the clothing to clip through the breasts)

Was that fixed in the preview, or am I just using the wrong skeleton or something?

EDIT: Nevermind, I looked back and saw :B

[abuelitosan]

love the tool. big thank you! I'm having great fun with it. I'm very much into cleavage for the clothing and having good results. I would like it even more if the cleavage range was a bit wider, if I could get the breasts even closer one to another (pressing each other would be great). what about a pushup slider?

 

anyway, grat job job. thank you very much for sharing.

[stuffed_bunny]

love the tool. big thank you! I'm having great fun with it. I'm very much into cleavage for the clothing and having good results. I would like it even more if the cleavage range was a bit wider' date=' if I could get the breasts even closer one to another (pressing each other would be great). what about a pushup slider?

[/quote']

The NippleUp slider has some pushup as undesired side-effect, perhaps I could extract some of that... or perhaps not. For pressing them together: BreastCleavage, DoubleMelon (coming "soon" to outfits) and negative BreastWidth.

[abuelitosan]

love the tool. big thank you! I'm having great fun with it. I'm very much into cleavage for the clothing and having good results. I would like it even more if the cleavage range was a bit wider' date=' if I could get the breasts even closer one to another (pressing each other would be great). what about a pushup slider?

[/quote']

The NippleUp slider has some pushup as undesired side-effect, perhaps I could extract some of that... or perhaps not. For pressing them together: BreastCleavage, DoubleMelon (coming "soon" to outfits) and negative BreastWidth.

 

thanks for the tip. I'm using nipple up, but it's not available for outfits. How do I get negative breastwidth?

[abuelitosan]

love the tool. big thank you! I'm having great fun with it. I'm very much into cleavage for the clothing and having good results. I would like it even more if the cleavage range was a bit wider' date=' if I could get the breasts even closer one to another (pressing each other would be great). what about a pushup slider?

[/quote']

The NippleUp slider has some pushup as undesired side-effect, perhaps I could extract some of that... or perhaps not. For pressing them together: BreastCleavage, DoubleMelon (coming "soon" to outfits) and negative BreastWidth.

 

thanks for the tip. I'm using nipple up, but it's not available for outfits. How do I get negative breastwidth?

forget it. found it. actually i can give the cleavage values over 100. thanks!

[biscuits798]

Can some one help me with these cap things where the legs and body meet. I've been playing around with the sliders but i can fix it.

[GermLoc]

Can some one help me with these cap things where the legs and body meet. I've been playing around with the sliders but i can fix it.

 

If i remember correctly that's an issue with your femalebody_1.dds texture being for the CBBE Slim style body and not for the fullsized CBBE type bodies. when you install CBBE 3.1 don't choose the option for the slimmer body textures and it...."should" fix the issue, unless A)I'm forgetting exactly how it was rectified or -- it's another issue entirely.

I would at least try stocking up a normal sized CBBE femalebody_1.dds skin texture and a matching normal map (msn) just to be sure....won't take long and you'll somewhat be able to isolate or fix(?)....hopefully the issue altogether...

 

hope something here helps ya.

 

GermLoc