Jump to content

Recommended Posts

Posted (edited)

Oh so this version of fertile breeder dosn't work with the current scr build? Thats a shame, oh well, the FB loadscreens will keep me company while I sob in my icky corner

 

durr durr durr I R not read good. So fertile breeder should be working fine for me right? I dont know, every time I try to load it up it just keeps me stuck at the menu. I attached a snip of my load order as well as the warning text

 

*double edit* just tried loading it again, same problem, everything else works perfectly fine except for FB.

post-802189-0-70294200-1433910312_thumb.png

Edited by invictus691
Posted

Oh so this version of fertile breeder dosn't work with the current scr build? Thats a shame, oh well, the FB loadscreens will keep me company while I sob in my icky corner

 

durr durr durr I R not read good. So fertile breeder should be working fine for me right? I dont know, every time I try to load it up it just keeps me stuck at the menu. I attached a snip of my load order as well as the warning text

 

*double edit* just tried loading it again, same problem, everything else works perfectly fine except for FB.

The warning is nothing you need to be concerned with. As far as FB not working goes, are you using all the latest sexout betas? Going by what I could see of your load order it doesn't seem like you are. If that's the case you should know FB is made & tested with the latest sexout betas, using older versions will likely cause issues.

Posted

 

Oh so this version of fertile breeder dosn't work with the current scr build? Thats a shame, oh well, the FB loadscreens will keep me company while I sob in my icky corner

 

durr durr durr I R not read good. So fertile breeder should be working fine for me right? I dont know, every time I try to load it up it just keeps me stuck at the menu. I attached a snip of my load order as well as the warning text

 

*double edit* just tried loading it again, same problem, everything else works perfectly fine except for FB.

The warning is nothing you need to be concerned with. As far as FB not working goes, are you using all the latest sexout betas? Going by what I could see of your load order it doesn't seem like you are. If that's the case you should know FB is made & tested with the latest sexout betas, using older versions will likely cause issues.

 

 

Could you link me to the download I need? When I went to the sexout NG page and compared my installs to what was available they were all the latest versions. Or is it my SCR thats out-dated?

 

For clarity, here are all of my Sexout related downloads and installs and junk

post-802189-0-43459700-1433919019_thumb.png

Posted

 

 

Oh so this version of fertile breeder dosn't work with the current scr build? Thats a shame, oh well, the FB loadscreens will keep me company while I sob in my icky corner

 

durr durr durr I R not read good. So fertile breeder should be working fine for me right? I dont know, every time I try to load it up it just keeps me stuck at the menu. I attached a snip of my load order as well as the warning text

 

*double edit* just tried loading it again, same problem, everything else works perfectly fine except for FB.

The warning is nothing you need to be concerned with. As far as FB not working goes, are you using all the latest sexout betas? Going by what I could see of your load order it doesn't seem like you are. If that's the case you should know FB is made & tested with the latest sexout betas, using older versions will likely cause issues.

 

 

Could you link me to the download I need? When I went to the sexout NG page and compared my installs to what was available they were all the latest versions. Or is it my SCR thats out-dated?

 

For clarity, here are all of my Sexout related downloads and installs and junk

 

No problem. Here are the links to the versions you need:

Sexout    http://www.loverslab.com/files/file/2019-sexoutng-beta-93b21/

SCR        http://www.loverslab.com/files/file/104-scr-beta-experimental-test-release-wip/

Preg        http://www.loverslab.com/files/file/103-so-pregoffspring-beta-experimental-test-release-wip/

Posted

 

 

 

Oh so this version of fertile breeder dosn't work with the current scr build? Thats a shame, oh well, the FB loadscreens will keep me company while I sob in my icky corner

 

durr durr durr I R not read good. So fertile breeder should be working fine for me right? I dont know, every time I try to load it up it just keeps me stuck at the menu. I attached a snip of my load order as well as the warning text

 

*double edit* just tried loading it again, same problem, everything else works perfectly fine except for FB.

The warning is nothing you need to be concerned with. As far as FB not working goes, are you using all the latest sexout betas? Going by what I could see of your load order it doesn't seem like you are. If that's the case you should know FB is made & tested with the latest sexout betas, using older versions will likely cause issues.

 

 

Could you link me to the download I need? When I went to the sexout NG page and compared my installs to what was available they were all the latest versions. Or is it my SCR thats out-dated?

 

For clarity, here are all of my Sexout related downloads and installs and junk

 

No problem. Here are the links to the versions you need:

Sexout    http://www.loverslab.com/files/file/2019-sexoutng-beta-93b21/

SCR        http://www.loverslab.com/files/file/104-scr-beta-experimental-test-release-wip/

Preg        http://www.loverslab.com/files/file/103-so-pregoffspring-beta-experimental-test-release-wip/

 

 

Oh wow everything got a new beta? Did something happen to the original Sexout and its affeliates?

Posted

Odessa took over sexout, but they've all had betas for a very long time now. I'm not sure when Odessa plans to update the sexout stable version, if at all. Halstrom updates the other two stables fairly regularly.

Posted

If only Wrye Flash could detect version numbers XD

 

@ritualclarity already feelin' like a champ :) I'm listed above Tryout, so that's quite the feat XD

Posted

If only Wrye Flash could detect version numbers XD

 

@ritualclarity already feelin' like a champ :) I'm listed above Tryout, so that's quite the feat XD

You should probably edit the description to specify the sexout betas as requirements.

Posted

 

If only Wrye Flash could detect version numbers XD

 

@ritualclarity already feelin' like a champ :) I'm listed above Tryout, so that's quite the feat XD

You should probably edit the description to specify the sexout betas as requirements.

Way ahead of you ;) Already did that.

Posted

After I updatet to the latest version I can't start the Cazadors quest correctly after I talket to Iris to start she like before she walks against the fence so I used the dialog to port her to the Hunter but nothing happens, only when Hunter moves she follows him but nothing more.

 

sorry for my bad english.

Posted

Hmmm... I'll look into that right away and release a hotfix asap (probably an issue with navmesh)

Posted

Oh so this version of fertile breeder dosn't work with the current scr build? Thats a shame, oh well, the FB loadscreens will keep me company while I sob in my icky corner

 

durr durr durr I R not read good. So fertile breeder should be working fine for me right? I dont know, every time I try to load it up it just keeps me stuck at the menu. I attached a snip of my load order as well as the warning text

 

*double edit* just tried loading it again, same problem, everything else works perfectly fine except for FB.

You should be able to use a load order export to get a text file that you can then add to a spoiler.. It would make it easier for others to read the order and help you later when you have a larger load order to view. Also you have several minor (not major problem causing ) issues. The SCR requirements that are used don't need to be installed and might lower your esp limit and cause you minor glitches and problems before finally crashing (after your "personal plugin limit" has been reached). FYI. Just because you can install 254 mods (esps etc) into the game don't mean that your machine can handle that many mods.

 

After you get more settled check my SCR Resources Tutorial.. It has instructions to but your load order on a diet and give you one.. constant... easy to load and work SCR Resources folder that will cause you absolutely no problems even if you uninstall all the Sexout mods. (only texture meshes)..

 

 

 

 

Oh so this version of fertile breeder dosn't work with the current scr build? Thats a shame, oh well, the FB loadscreens will keep me company while I sob in my icky corner

 

durr durr durr I R not read good. So fertile breeder should be working fine for me right? I dont know, every time I try to load it up it just keeps me stuck at the menu. I attached a snip of my load order as well as the warning text

 

*double edit* just tried loading it again, same problem, everything else works perfectly fine except for FB.

The warning is nothing you need to be concerned with. As far as FB not working goes, are you using all the latest sexout betas? Going by what I could see of your load order it doesn't seem like you are. If that's the case you should know FB is made & tested with the latest sexout betas, using older versions will likely cause issues.

 

 

Could you link me to the download I need? When I went to the sexout NG page and compared my installs to what was available they were all the latest versions. Or is it my SCR thats out-dated?

 

For clarity, here are all of my Sexout related downloads and installs and junk

 

No problem. Here are the links to the versions you need:

Sexout    http://www.loverslab.com/files/file/2019-sexoutng-beta-93b21/

SCR        http://www.loverslab.com/files/file/104-scr-beta-experimental-test-release-wip/

Preg        http://www.loverslab.com/files/file/103-so-pregoffspring-beta-experimental-test-release-wip/

 

Lets not forget that Spunk requires an Beta NVSE as well. Also can't forget the NXextender version.. Most use the most bleeding edge version.

 

If only Wrye Flash could detect version numbers XD

 

@ritualclarity already feelin' like a champ :) I'm listed above Tryout, so that's quite the feat XD

That you are. :D

 

 

If only Wrye Flash could detect version numbers XD

 

@ritualclarity already feelin' like a champ :) I'm listed above Tryout, so that's quite the feat XD

You should probably edit the description to specify the sexout betas as requirements.

LOL. I had thought it already was mentioned .. not sure where or if perhaps it was just implied.. Maybe now that I seem to have a stable computer (for the first time in a few years it seems) I might be able to start testing and actually catching back up on the changes here.. and elsewhere.

Posted

 

LOL. I had thought it already was mentioned .. not sure where or if perhaps it was just implied.. Maybe now that I seem to have a stable computer (for the first time in a few years it seems) I might be able to start testing and actually catching back up on the changes here.. and elsewhere.

 

 

What makes you think you need a strong computer? Mine is spawn from the assend of the corner of hell that can't even be bothered to burn but still likes to piss people off with its sloth... and since I make this stuff, surely it runs on mine :)

Posted

 

 

LOL. I had thought it already was mentioned .. not sure where or if perhaps it was just implied.. Maybe now that I seem to have a stable computer (for the first time in a few years it seems) I might be able to start testing and actually catching back up on the changes here.. and elsewhere.

 

 

What makes you think you need a strong computer? Mine is spawn from the assend of the corner of hell that can't even be bothered to burn but still likes to piss people off with its sloth... and since I make this stuff, surely it runs on mine :)

 

Power isn't needed. Having it not corrupt your files is very useful. Being able to use the usb drive to backup something at some speed greater than 1 or 2 mb without crashing would be useful as well. My old computer memory went bad and corrupted most of all my old collection of mods that were on the computer.. :@ Spent weeks trying and testing the backups to make sure I have at least some of those working. Then after that fixed.. the motherboard started showing problems as well. (usb connection going bad.. blue screens etc) :angry:

 

So you are absolutely correct.. Had I had some weak but reliable and stable computer.. I could start testing and catching backup on mods and such.. but I didn't.. Can't really give reliable feedback on a mod when my computer is the reason it don't work. ;). When I was testing Loogie's Tryout's mod and some of your original submissions, I started to realize that some of the reports weren't the cause of the mod but my computer glitching. Haven't tested or even played any games since. My second computer (laptop) won't even play Fallout so I was out of luck. :(

 

(Reason for me not giving more (and reliable) feedback on this mod so far.. ;). And only giving some advise and suggestions on support issues.. Oh.. and some funny clips and comments.. :angel:  to keep things light and fun.. :D

 

Posted

And I'm also fairly certain that you're one of those 18 people rating this, so yaay for you :)

But yeah... I need a better PC as well, mine is starting to flunk out a little as well from time to time (boot recovery etc.), but it's been like a Kalashnikov to me: not very exquisite, but reliable as it comes. Six years old and still functioning decently enough.

Posted

And I'm also fairly certain that you're one of those 18 people rating this, so yaay for you :)

But yeah... I need a better PC as well, mine is starting to flunk out a little as well from time to time (boot recovery etc.), but it's been like a Kalashnikov to me: not very exquisite, but reliable as it comes. Six years old and still functioning decently enough.

 

I was one of the first to rate your mod.. even before I had installed to try it on my old unreliable computer.. .. I haven't even completed or even barely even started any of your quest.. Just saw some of the locations.. I gave that rating because of your quick response and willingness to grow and develop as a mod author.. :)

 

edit:

Now I would rate it again( if possible.. :P) because of the massive amount of work and content you created.. :D

 

Posted

 

 

 

 

Oh so this version of fertile breeder dosn't work with the current scr build? Thats a shame, oh well, the FB loadscreens will keep me company while I sob in my icky corner

 

durr durr durr I R not read good. So fertile breeder should be working fine for me right? I dont know, every time I try to load it up it just keeps me stuck at the menu. I attached a snip of my load order as well as the warning text

 

*double edit* just tried loading it again, same problem, everything else works perfectly fine except for FB.

The warning is nothing you need to be concerned with. As far as FB not working goes, are you using all the latest sexout betas? Going by what I could see of your load order it doesn't seem like you are. If that's the case you should know FB is made & tested with the latest sexout betas, using older versions will likely cause issues.

Could you link me to the download I need? When I went to the sexout NG page and compared my installs to what was available they were all the latest versions. Or is it my SCR thats out-dated?

 

For clarity, here are all of my Sexout related downloads and installs and junk

No problem. Here are the links to the versions you need:

Sexout http://www.loverslab.com/files/file/2019-sexoutng-beta-93b21/

SCR http://www.loverslab.com/files/file/104-scr-beta-experimental-test-release-wip/

Preg http://www.loverslab.com/files/file/103-so-pregoffspring-beta-experimental-test-release-wip/

Lets not forget that Spunk requires an Beta NVSE as well. Also can't forget the NXextender version.. Most use the most bleeding edge version.
Spunk is not a requirement of FB.
Posted

@Gamedude711 Spunk is a requirement of Sexout Pregnancy. I think it'd be redundant to list all the required mods' requirements :P

Posted

@Gamedude711 Spunk is a requirement of Sexout Pregnancy. I think it'd be redundant to list all the required mods' requirements :P

 

Yep..

Perhaps place a clause.. "And all the requirements, requirements".. :toward the end of the requirements list :D

 

You and I understand this however some might miss a step with the other requirements and cause tech support issues with your mod because of this ;).

Posted

It's a lot faster to reply to those rare cases than to hunt down every single requirement and list it. It also saves on digital paper, which then saves digital trees.

Posted

It's a lot faster to reply to those rare cases than to hunt down every single requirement and list it. It also saves on digital paper, which then saves digital trees.

 

Yes.. however my suggestion is this

 

 

--Requirements--

Fertibe Breeder is built with the most recent beta versions of most LL mods. When experiencing issues, such as being stuck on main menu, upgrade these first.

-Fallout New Vegas

-SexoutNG

-Sexout Common Recources

-Sexout Pregnancy V3

-Sexout OffSpring

-Maternity clothes (likely included in Sexout Pregnancy V3)

-And all requirements for the above mods.

This way if someone say.. Halstrom breaks apart another mod :P.. you don't have to update your OP.. ;). It would be taken care of by the other mod authors Requirements list ... It would also cover the assets that SCR adds in the SCR Resources folder creation provided later you find something you want to use like the "KennelBitch" clothing etc. Also again no real need to update the OP.. If someone comes along with missing textures for a scene you have created (like one above with the Kennel Bitch armor) you and your minions can point them to he missing GSBModders resources in the SCR Resources Folder.creation..

 

 

Just a suggestion.. :angel:

Posted

@Gamedude711 Spunk is a requirement of Sexout Pregnancy. I think it'd be redundant to list all the required mods' requirements :P

I don't believe it's an actual requirement for it to run (last time I checked anyway) it's just that preg uses spunks sperm tracking now. However, for your mod sperm tracking is unnecessary since you 'inject' the babies straight in.

 

Also, don't you have a concert to be @?

Posted

 

@Gamedude711 Spunk is a requirement of Sexout Pregnancy. I think it'd be redundant to list all the required mods' requirements :P

I don't believe it's an actual requirement for it to run (last time I checked anyway) it's just that preg uses spunks sperm tracking now. However, for your mod sperm tracking is unnecessary since you 'inject' the babies straight in.

 

 

The latest Pregnancy Beta does requires Spunk. And injecting the babies is fairly useless if Pregnancy doesn't work properly. Also, some of the objects referenced may have a different ID in the two Pregnancy versions. So I still recommend always using the beta versions when using the most recent FB version.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...