SexLab Sex Slaves 6.2 December 06, 2016

[aqqh]

Hey, is there any way to show progress with the slaves that you are training? (like a variable i can check ingame or sth)

i feel like ive been doing nothing but hitting them and then have sex with them / let them perform oral for an hour (real time) and still no progress, also the "masturbate for me" dialogue is not there anymore after 2 failed attempts, dont know why ...

Ingame you can ask Volkar about their progress.

Out of game you can browse your papyrus log for entries like this:

[11/10/2014 - 08:38:06AM] confidenceVal is 3.000000, maxhits 25, numberofhits 61, hatred 0     ;whipping

 

[11/10/2014 - 08:38:57AM] Increasing sexcount to 6      ;sex scene

 

 

 

Apparently I got the key to the dungeon by killing tzollaman. Figures 

If he did not talk to you then scene inside that dungeon wont work either. Enter that dungeon and check your log for why your followers are not recognized.

[sidfu]

arissa the wandering rouge mod still breaks the mcm. hopely now with more voice added he can see why.

 

i even tried after starting game without her installing here to see if that fix it but instead its instant ctd if u install her after u have sex slaves installed.

[fishburger67]

 

 

where actually is that tzollaman guy i am supposed to talk to (dont get quest marker)

 

You should have a quest marker.  Read the bandit note.

 

 

Mhh sorry for my short reply yesterday, i was in a hurry. Guess that this happened due to some odd unknown bug i m having lately where some npcs are either invisible or just not there. Though this never happened with a NPC added by a mod i guess this is the first time for that. Could u give me the Refid of Tzollaman, cause ive made good experience with the moveto command when it comes to this bug.

 

 

MiaKhajiitTzollaman 06054A17 as usual, you have to replace the first 4 bytes with the load order

 

[fishburger67]

Apparently I got the key to the dungeon by killing tzollaman. Figures 

 

Could you do me a favor by making a papyrus log of when you enter the inn and he won't talk to you?

 

Also, tell me which version you were running, the 20, 20a or 21 version. 

 

There are two possible problems, your machine is a little slow and the cell scan happened before your followers got in the cell or your follower mod is not setting the variables I need.

 

[fishburger67]

arissa the wandering rouge mod still breaks the mcm. hopely now with more voice added he can see why.

 

i even tried after starting game without her installing here to see if that fix it but instead its instant ctd if u install her after u have sex slaves installed.

 

Gonna have a look at this MCM stuff today.

 

The CTD is unrelated.  You have a setup that has a mod that is missing a requirement.  Use TES5Edit to find it.

[fishburger67]

MCM Menu Issues

 

If you are having MCM menu issues, I have gone over my code and it is all correct.  So, I researched the topic and found the following:

 

 

"When starting SkyUI on a fresh save for the first time, you may have to save and reload (the game you just saved) to make all entries show up.

 

The detailed technical reason why this happens is that there is a script, which manages all the menus. After each game (re)load, this script asks in the room "hello, are there any new menus?". In rare occasions this request may be sent before a menu has been initialized. By rare I mean Papyrus decides when to initialize and it may be instant, or it may be after 5 seconds if there are other things going on at the moment. Anyway, if the menu is initialized too late, it may miss the first request. But the menu manager will give the menu another chance to register because it asks again after each subsequent reload.

 

 

This information points to this topic on the Nexus.  The very last page has this advise:

 

GENTLEMEN!

 

After browsing 10+ hours, I have found a solution that has fixed the problems listed, which I also have.

 

DELETE THE SKYRIM.INI

Then launch Skyrim with no mods,

Then if you launch with mods again,

the Menus and mods will be fixed.

 

 

The simplest thing to try in all of this is to load miaslair, wait a few minutes, then save your game.  Then, reload the save and see if the MCM menu shows up.

[sidfu]

fish those are common trouble shooting steps there. also if u using mod manager u dont need to delte your skyrim.ini. 

 

on ctd i mentioned there no missing masters. all i did was start a new game with arissa disabled. thje sex slave mcm come up. exit enbled arissa then once u tried to load that game it would crash right when u load into the save.

 

the next test had arrisa installed started new game. saved exit now enabled sex slaved once enter game mcm never pops up. as a extra thing on same save that had arrisa i disabled it then loaded with sex slaved the mcm cam up.

 

in version 17 of sex slaves arisa worked fine and arisa hasnt been updated recently. i didnt try the betas  but 2.0 no mcm and tried the 2.1 still no mcm.

since it worked in version 17 only thing i can think is something u added and sex slaves and arrisa are fighting each other when both installed. gonna do a quick check again and have papyris on again to see if anything changed iwth .21 in th elog

 

arisa changes the wicommenttrigger script do u think that would be the cause maybe?

 

[Kyubbiman]

 

Apparently I got the key to the dungeon by killing tzollaman. Figures 

 

Could you do me a favor by making a papyrus log of when you enter the inn and he won't talk to you?

 

Also, tell me which version you were running, the 20, 20a or 21 version. 

 

There are two possible problems, your machine is a little slow and the cell scan happened before your followers got in the cell or your follower mod is not setting the variables I need.

 

I don't exactly know how to create a papyrus log or what it is. I'm using 3 vanilla followers as well as Amazing follower tweaks. As for slowness would it be possible to disable a bunch of my mods to speed up my computer enough to the point where the cell scan will scan properly? Also should I use a different follower mod. I'm using 2.1 version by the way. I'm not that tech savvy so things like coding are hard for me to understand. 

 

[fishburger67]

fish those are common trouble shooting steps there. also if u using mod manager u dont need to delte your skyrim.ini. 

 

on ctd i mentioned there no missing masters. all i did was start a new game with arissa disabled. thje sex slave mcm come up. exit enbled arissa then once u tried to load that game it would crash right when u load into the save.

 

the next test had arrisa installed started new game. saved exit now enabled sex slaved once enter game mcm never pops up. as a extra thing on same save that had arrisa i disabled it then loaded with sex slaved the mcm cam up.

 

in version 17 of sex slaves arisa worked fine and arisa hasnt been updated recently. i didnt try the betas  but 2.0 no mcm and tried the 2.1 still no mcm.

since it worked in version 17 only thing i can think is something u added and sex slaves and arrisa are fighting each other when both installed. gonna do a quick check again and have papyris on again to see if anything changed iwth .21 in th elog

 

arisa changes the wicommenttrigger script do u think that would be the cause maybe?

I have not (yet) changed wicommenttrigger, but I expect to soon.

 

I would try the troubleshooting steps above, just for drill.  Also, try putting arisa below sex slaves in your load order.  If you are CTD on load, you have a missing master.  There is no other known reason.

[fishburger67]

 

 

Apparently I got the key to the dungeon by killing tzollaman. Figures 

 

Could you do me a favor by making a papyrus log of when you enter the inn and he won't talk to you?

 

Also, tell me which version you were running, the 20, 20a or 21 version. 

 

There are two possible problems, your machine is a little slow and the cell scan happened before your followers got in the cell or your follower mod is not setting the variables I need.

 

I don't exactly know how to create a papyrus log or what it is. I'm using 3 vanilla followers as well as Amazing follower tweaks. As for slowness would it be possible to disable a bunch of my mods to speed up my computer enough to the point where the cell scan will scan properly? Also should I use a different follower mod. I'm using 2.1 version by the way. I'm not that tech savvy so things like coding are hard for me to understand. 

 

 

I just uploaded a new version.  The MCM menu will show you how many followers I think you have.  Check the post below for details.

 

[fishburger67]

New Version 21a

 

This version should probably have been 22, but because it does not require quest restarts, I left it 21.

 

This version adds 4 MCM menu options.  The first lets you set how long the delay is before doing a follower scan when you change cells.  The MCM menu also shows you how many followers the mod thinks you have.  If it is not showing the correct value, increase the cell scan delay by 2 seconds, exit the cell, and re-enter.  Check the MCM menu again to see if the follower count is correct.  If you get past a 5 second delay, make a papyrus log and post it.

 

The second MCM menu allows you to change the amount of time it takes to train a slave.  The default value of 20 means that it take about 10 hours of game time to make one.  The minimum value of 4 means that it take 2 hours of game time.  20 hours of game time is the realistic minimum, but you now have the option to be a supercharged slave trainer.

 

The last two MCM menu items are related to which 3 ways are used in orgies.  The code to implement this does not yet exist, so they are currently meaningless.  I put them in there because it should not be too long before I get it done.

 

I also changed the strength of the AI I put on your followers when they are chained.  There are now set to 99, one less than the maximum.  I am hoping this fixes problems with the odder followers.

 

Also made a minor tweek to the free Jenny Winglow scene.

 

 

[fishburger67]

How to make a papyrus log:

In your skyrim.ini in Documents > My Games > Skyrim >[skyrim.ini]:

 

[Papyrus]
bEnableLogging=1
bEnableTrace=1
bLoadDebugInformation=1

 

 

 

If the papyrus section does not exist add the [Papyrus] tag, otherwise, just add the values below it.  If the values exist, change them as shown above.

 

Then, when you start a game, you will have a new file in MyDocuments -> \my games ->skyrim -> Logs ->Script

 

You start off with papyrus.0.log and you will eventually have .0 - .3.  Papyrus.0.log is always the latest.

 

Just for drill, you should always make a log from time to time to see if you have any save game corruption.  Once you fix it all, turn off logging by setting the above values to 0.  Disabling logging reduces in-game CTDs if you are on the edge.

 

 

[Kyubbiman]

Actually I got things working now. I ended up disabling all my mods and then reactivating some of them. I went back and started a new game and well I could talk to Tzollazam. So new game and paying a little closer attention to my mods. 

[nyctophilia]

 

 

 

where actually is that tzollaman guy i am supposed to talk to (dont get quest marker)

 

You should have a quest marker.  Read the bandit note.

 

 

Mhh sorry for my short reply yesterday, i was in a hurry. Guess that this happened due to some odd unknown bug i m having lately where some npcs are either invisible or just not there. Though this never happened with a NPC added by a mod i guess this is the first time for that. Could u give me the Refid of Tzollaman, cause ive made good experience with the moveto command when it comes to this bug.

 

 

MiaKhajiitTzollaman 06054A17 as usual, you have to replace the first 4 bytes with the load order

 

 

 

That's his BaseID, which will not work with the "player.moveto" command. Anytime you use an NPC's BaseID with a command, you create a copy.

 

 

fish those are common trouble shooting steps there. also if u using mod manager u dont need to delte your skyrim.ini. 

 

on ctd i mentioned there no missing masters. all i did was start a new game with arissa disabled. thje sex slave mcm come up. exit enbled arissa then once u tried to load that game it would crash right when u load into the save.

 

the next test had arrisa installed started new game. saved exit now enabled sex slaved once enter game mcm never pops up. as a extra thing on same save that had arrisa i disabled it then loaded with sex slaved the mcm cam up.

 

in version 17 of sex slaves arisa worked fine and arisa hasnt been updated recently. i didnt try the betas  but 2.0 no mcm and tried the 2.1 still no mcm.

since it worked in version 17 only thing i can think is something u added and sex slaves and arrisa are fighting each other when both installed. gonna do a quick check again and have papyris on again to see if anything changed iwth .21 in th elog

 

arisa changes the wicommenttrigger script do u think that would be the cause maybe?

I have not (yet) changed wicommenttrigger, but I expect to soon.

 

I would try the troubleshooting steps above, just for drill.  Also, try putting arisa below sex slaves in your load order.  If you are CTD on load, you have a missing master.  There is no other known reason.

 

 

What sidfu is describing, are exactly my results. .ESP load order and/or data priority (I'm using M0 also) makes no difference. "wicommenttriggerscript.pex" isn't causing the issue. Adding the Arissa mod, after the sex slave MCM has initialized results in CTD nine out of 10 times. When the save actually loads, opening the MCM and clicking on the sex slave menu causes an instant CTD. If the save loads, saving it again and reloading, causes a completely corrupted save.

[fishburger67]

New Version 21b

 

I know this is really fast, but I found a critical bug in Sex Slaves while working on Sexlab Aroused and I wanted to get it in as soon as possible.

 

This version fixes a critical bug where NPCs critical to the vanilla game would not be recognized as followers, eg. Aela.  If you have been having this problem, download and install the 21b version.

[fishburger67]

 

 

 

 

 

 

where actually is that tzollaman guy i am supposed to talk to (dont get quest marker)

 

You should have a quest marker.  Read the bandit note.

 

 

Mhh sorry for my short reply yesterday, i was in a hurry. Guess that this happened due to some odd unknown bug i m having lately where some npcs are either invisible or just not there. Though this never happened with a NPC added by a mod i guess this is the first time for that. Could u give me the Refid of Tzollaman, cause ive made good experience with the moveto command when it comes to this bug.

 

 

MiaKhajiitTzollaman 06054A17 as usual, you have to replace the first 4 bytes with the load order
 

 

 

That's his BaseID, which will not work with the "player.moveto" command. Anytime you use an NPC's BaseID with a command, you create a copy.

 

 

fish those are common trouble shooting steps there. also if u using mod manager u dont need to delte your skyrim.ini. 

 

on ctd i mentioned there no missing masters. all i did was start a new game with arissa disabled. thje sex slave mcm come up. exit enbled arissa then once u tried to load that game it would crash right when u load into the save.

 

the next test had arrisa installed started new game. saved exit now enabled sex slaved once enter game mcm never pops up. as a extra thing on same save that had arrisa i disabled it then loaded with sex slaved the mcm cam up.

 

in version 17 of sex slaves arisa worked fine and arisa hasnt been updated recently. i didnt try the betas  but 2.0 no mcm and tried the 2.1 still no mcm.

since it worked in version 17 only thing i can think is something u added and sex slaves and arrisa are fighting each other when both installed. gonna do a quick check again and have papyris on again to see if anything changed iwth .21 in th elog

 

arisa changes the wicommenttrigger script do u think that would be the cause maybe?

I have not (yet) changed wicommenttrigger, but I expect to soon.

 

I would try the troubleshooting steps above, just for drill.  Also, try putting arisa below sex slaves in your load order.  If you are CTD on load, you have a missing master.  There is no other known reason.

 

 

 

What sidfu is describing, are exactly my results. .ESP load order and/or data priority (I'm using M0 also) makes no difference. "wicommenttriggerscript.pex" isn't causing the issue. Adding the Arissa mod, after the sex slave MCM has initialized results in CTD nine out of 10 times. When the save actually loads, opening the MCM and clicking on the sex slave menu causes an instant CTD. If the save loads, saving it again and reloading, causes a completely corrupted save.

 

Gonna have to load up this stupid Arissa mod and see what is going on, but I won't be able to get to it right away.  I have read on several threads that it is not friendly with lots of mods.

[nyctophilia]

The new MCM is outstanding ! Knowing your followers are recognized, and the fact that you can configure the training time is awesome ! Thank you very much !

 

The voice acting, male and female, is amazing IMO. The rhythm and inflection are top-notch ! Darkminxi's Jenny Winglow is smooth and sexy, with the accent being a huge plus. All the new voice acting really brings the fantasy to life. Thank you all !

[Kyubbiman]

How do I complete it's a trap. Archerone runs his dialogue. Then he whips me a couple of times; after that we just stand around and nothing happens. Is this a glitch of some sort

 

[nyctophilia]

"Q2. I can't get the "Its a trap" scene to continue after I am hanging from the ceiling.
A2. Lots of possible answers here, but the most likely are that you brought a follower with you that cannot be contained in an alias used in the scene. Take vanilla followers with you just to be safe. Once you are in chains, you should have a follower to your right in chains and another ahead of you in the pillory. If you have followers wandering around. Nothing will work. Restart your game from outside the dungeon and grab 2 vanilla followers."

[Kyubbiman]

I've got vanilla followers already. It's not that. He whips me and I fall out of my chains; once he finishes whipping me  he just stands there and nothing happens. Is there a way to force any advancement? What's supposed to happen in this scene anyway what comes next? 

[nyctophilia]

In the new version, the MCM shows you how many of your followers are recognized. Check that first. The "MiaDungeonCapture quest" is automated until you reach stage 50 (Drink the antidote potion). You could try setstage MiaDungeonCapture 50, if you can't continue from there, then you most likely have a problem with your follower mod or NPC's.

[BonMage32]

To take off follower-slave's clothes, i should turn on the Enable Inventory Management?

[Kyubbiman]

In the new version, the MCM shows you how many of your followers are recognized. Check that first. The "MiaDungeonCapture quest" is automated until you reach stage 50 (Drink the antidote potion). You could try setstage MiaDungeonCapture 50, if you can't continue from there, then you most likely have a problem with your follower mod or NPC's.

What follower mod do you use?

[nyctophilia]

What follower mod do you use?

 

Extensible Follower Framework v4-0-0 Beta 13

[Kyubbiman]

After he gets done whipping me the cutscene just stops working. He just stands there doing nothing.