Jump to content

"What mod is this?" and Adult requests

Ashal

Recommended Posts

Zor2k13

Zor2k13

Posted
Posted

I was just reading somewhere a post about slof getting pissed off about ppl talkin shit about her mods so she pulled them all. The post was dated many years ago so I don't know if she got over it and put them back or what.

Zor2k13

Zor2k13

Posted
Posted

@myuhinny

 

In the apachii heroes store mod these same boots are used but they have some different bone settings. When I try to convert those boots the calf guards get messed up at the top so I tried something different. Thinking about what you said about missing bones I selected all body parts this time instead of just feet and lower body for template mesh or some shoes from somewhere else etc.

 

When I did this the top of the calf guards went back to normal but the feet parts are still messed up. so the solution is, find the missing bones! I will go back to those boots found in the goddess store mod I think they use less bones anyway and try some different female bodies as template meshes to see what happens. Since the boot credits were talking about exnem references I have been trying exnem body so I will try other bodies maybe those credits are not for those boots.

AnnaFly

AnnaFly

Posted
Posted

Cool thanks for that info never would have thought of that myself I will try that and see what happens thanks for your help:-)

 

 

EDIT

 

Ok tried your adjusted mesh and strangely clothing converter used it just fine? no crashes with converter but the output was not good. The calf guards are rotated inward after converting from exnem lower to HGEC LL lower.

 

I looked for growlf stuff as myuhinny suggested but didn't see the boots from any of his mods on nexus.

 

 

I am thinking these boots were ripped from another game, when I use just the shoes part and run it through mesh rigger, the output always has the toes stretched far over to the left and rotated sideways like the whole shoe mesh was at one time rotated sideways and sitting over to the left instead of constructed from dead center. Either the creator was very sloppy in blender/3dsmax during creation or the boots were poorly converted from another game it is one of those two things I think.

Greetings.

 

 Sorry i was very tired a few hours ago and i forgot the "best" idea in this case.

 

Listen : these boots are made in a low poly model ( good point ) and in 3 separated pieces right ?

 

So why not just replace the third part ( the shoes mesh )  by a "simply" well working shoe model you already got ? As this mesh use a very low poly model , it would be easy to just adjust the texture with NifSkope once converted .

 

Transform -     Textures----> edit UV .

 

Now if you still want  use the Clothing conveter , just use the Exnem mesh not mine ( the one i put on the NailFlan model ).

 

I need a cup of coffee , after that i will put some variations in a PS in this post with different shoe models where the Texture would be UVeted .

 

Of course once you start to edit the UV , you need to use the right texture , if you to add another texture to this model it's better to not " play" with the UV first .

 

Coming soon ... i think i would be able to post another model in about 15-20 minutes.

 

So check this post .

 

Cheers.

 

Edit ; i need a little more time because the body i used ( from Nailflan mod) don't match my HGEC " Standard Feet "  !

 

So i 'll check that Lower LL first and compare it to the one from Electrro Designer Body Spell mod ( Roberts Feet ) .... so i need to dowload this file first because there is no one Set body installed on this machine . I think Nailflan used the Coronerra lower and not the one From RAIAR and Madcat221 .

 

So firstly , i must be sure we are using the same Lower body ( Lower size HGEC LL ) .

 

Well , please compare this lowerbody HGEC LL with yours ... this is the one from Electrro Designer Body Spell Mod ( Bombshell) version non BB ( non BButt ) . I must be sure i use the right body before i continue.

 

This one match my " standardized " Feet ...  but not the one i posted with the Nailflan model .

 

PS : here one attempt with another shoe part ' Edit UV done ) and where i put a full real foot ( of course tpo avoid some clipping i needed to rescale the Y axe of this model , i don't like  a " big foot "  but i don't thing i can get better without using a real 3D tool or without running the Clothing Converter .) 

 

The Feet are the standard ones , but not the " nice " model from Robert".

 

Last thing : that just an example , you can test it with other animations just with NifSkope , you just need to copy Branc / paste branch to the Skeleton you use ( LAPF 1.6 ? ) an attach a Kf file to see your animation.

 

Avoid to move the " Guard piece"  and don't use it in a converter. I think the missing bones were removed by accident and there is something wrong between the X and Z axe ( if you try to recale the X axe , it moves like the Z axe , so that's no correct ! 

 

Cheers .

 

PPS : i also added  3 " Stencil properties " on these meshes , they were missing ) .

 

I think it would be better to use the Golden Saint boots with this texture ; the models are close and in all cases , this texture was not the original done for this model ( or not " well done " if so ) .

 

femalelowerbodyLL.nif

femalelowerbodyLL + shoe test 01.nif

AnnaFly

AnnaFly

Posted
Posted

@myuhinny

 

In the apachii heroes store mod these same boots are used but they have some different bone settings. When I try to convert those boots the calf guards get messed up at the top so I tried something different. Thinking about what you said about missing bones I selected all body parts this time instead of just feet and lower body for template mesh or some shoes from somewhere else etc.

 

When I did this the top of the calf guards went back to normal but the feet parts are still messed up. so the solution is, find the missing bones! I will go back to those boots found in the goddess store mod I think they use less bones anyway and try some different female bodies as template meshes to see what happens. Since the boot credits were talking about exnem references I have been trying exnem body so I will try other bodies maybe those credits are not for those boots.

Hi .

 

Another test ... what do you think about the GoldenSaint boots  with this texture - the one from your model) ? Of course it was necessary to run Texuture ---> Edit UV in NifSkope.

 

I think i let some " Foot/ Fee t" parts there . And i remove that " dammed" guard piece  too.

 

Cheers.

 

PS ; warning these boots were made for the HGEC O ( original ) " Normal " so the same lower used by Colourwheel in most of her mods ( 97 %) ... i just copybranc/paste Branch over the HGEC LL lower.

 

PPS : in the Apachii Godess v 1-5 , your model was packaged in  April 2008 ( if i'm right) so it was early done with another Skeleton , maybe something like the one from Eshme  or an older Growlf  Hot body and Cothes version ( 3 or 3.1 ???)  or why not just for the Vanilla Skeleton.

 

I have 3 differenr Apachii Godess mods on this machine , V1-3 , v 1-5 and another but  i don't know from which version  ...

 

Also : in the Torazine DMRA convertion there are a lot of Apachii models converted to DMRA so maybe Thorazine already convertted this one ( and of course i suppose he corrected that " dammed" guard piece ... ) .

 

I will check these converted file in a few hours , because it's 07:50 AM in my country and i have things to do .

 

So long.

femalelowerbodyLL + GoldenSaint model with the pirate texture.nif

post-239275-0-72791600-1427691255_thumb.jpg

myuhinny

myuhinny

Posted
Posted

@Zor2k13

 

Yeah Solf removed their stuff from oblivion they pulled their stuff because they only make stuff for male characters and people were converting the stuff to female characters. This is their website. http://www.slofslair.co.uk/games

 

When you are getting the stretching are you also using copy and delete weights when running mesh rigger? I think I have seen stretching when using those settings at times too.

Zor2k13

Zor2k13

Posted
Posted

Yeah the stretching even though using those settings. I still think it is some missing bone from some odd body mesh mod that is not used anymore. I tried UFF body, exnem and of course HGEC latest even roberts male body but the feet will always stretch. I did find a fixed version of the shoes and shoe guard though! but they are manipulated slightly so they don't quite match anymore:-( Hentai demonis armor from uglykidcid BBB collection check the attached file:-)

 

So hentai fixed it but chopped it up and reshaped it just a bit.

 

I am going to attempt some tests after changing the scale very slightly and position very slightly of the calf guards to so they don't clip anymore. I know enough to select reset center in some areas of the nif file and use the normalize option before that too. If the calf guards stay in place then it should be ok but I hate knowing the mesh is kinda screwed and might cause ctd or bugs for some people.

 

EDIT

 

@annafly

 

Thanks for the ideas, I am not gonna use the textures for the pirate stuff since I am going for a different theme of dark seksy leather:-)

Demonis.nif

AnnaFly

AnnaFly

Posted
Posted

Yeah the stretching even though using those settings. I still think it is some missing bone from some odd body mesh mod that is not used anymore. I tried UFF body, exnem and of course HGEC latest even roberts male body but the feet will always stretch. I did find a fixed version of the shoes and shoe guard though! but they are manipulated slightly so they don't quite match anymore:-( Hentai demonis armor from uglykidcid BBB collection check the attached file:-)

 

So hentai fixed it but chopped it up and reshaped it just a bit.

 

I am going to attempt some tests after changing the scale very slightly and position very slightly of the calf guards to so they don't clip anymore. I know enough to select reset center in some areas of the nif file and use the normalize option before that too. If the calf guards stay in place then it should be ok but I hate knowing the mesh is kinda screwed and might cause ctd or bugs for some people.

 

EDIT

 

@annafly

 

Thanks for the ideas, I am not gonna use the textures for the pirate stuff since I am going for a different theme of dark seksy leather:-)

Hi  Zor2k13 .

 

 What,  there is another problem too with this one ? ... :°)

 

Don't forget to right -clic on the very first node ( usually an in this case named " Scene Root") ---> bloc ---> crop to branch  .

 

that's just to clen your nif from the unused informations under the " Scene Root" when you just having loaded your mesh.

 

This " Demonis file is not clean , so if you intend to convert it to another body , use the " Crop To Branch " function first.

 

Cheers.

Zor2k13

Zor2k13

Posted
Posted

Here is what I am cobbling together with these boots, the slave trader 4 outfit:-)

 

Just trying to get the boots to work for now with some minimum texture work. Saving the details for later for when I come up with a logo and some details for the slave traders in PSE mod. I noticed since I started using these boots my character soon gets stuck moving in slow motion it might just be my crappy save game files or it might be the boots I am gonna test not wearing them even once to see if it makes a difference. Might be some other mod too who knows lol.

 

EDIT

 

I haven't done the menu icons yet just borrowing from source icons for now.

 

post-232484-0-06697700-1427738900_thumb.jpg

post-232484-0-67216500-1427738900_thumb.jpg

post-232484-0-67263200-1427738901_thumb.jpg

post-232484-0-66346400-1427738902_thumb.jpg

post-232484-0-66870400-1427738903_thumb.jpg

post-232484-0-66522800-1427738904_thumb.jpg

Zor2k13

Zor2k13

Posted
Posted

After all the trouble with this boot it appears it is causing problems. When worn by an npc everything is ok but worn by the player and things get really slo mo for the player even after taking the boots off. I can't fix this kind of stuff so I am gonna investigate alternatives but if anyone fixes this boot please post here it is a good boot would be a shame to just toss it away.

AnnaFly

AnnaFly

Posted
Posted

After all the trouble with this boot it appears it is causing problems. When worn by an npc everything is ok but worn by the player and things get really slo mo for the player even after taking the boots off. I can't fix this kind of stuff so I am gonna investigate alternatives but if anyone fixes this boot please post here it is a good boot would be a shame to just toss it away.

Greetings.

 

 Well now than Gooboo added to his GBEC Body  the HGEC "  standard "  compatible version ( compatible not only with the RAIAR-Madcat221 second Edition but also with Exnem - logic ) in other words the " Fejeena tweaked version  " ( bisous en passant )  il 'll be very busy for some weeks.

 

So just one question : is there already a full Skeleton attached to one of the pieces weared by you ( the player) . In other words ( once again - sorry my english is limited ) a skeleton like the one i put a few post above just for testing purpose ( and where ther was already an animation loaded ) ?

 

If so , this could cause a serious drop of FPS in some " rare " cases .

 

Now , if you prefer , put your mesh here and i'm sure someone would be " happy"  to test them in game ... that's your choice.

 

Cheers.

Zor2k13

Zor2k13

Posted
Posted

Oh now I can see it, dam speedbuster shit that will never be released ever ever never! that modder doesn't release certain things, probably making it for a private market where they float it around on cdrom for x amount money at some corner market stall:-(

Risray

Risray

Posted
Posted

Does anyone know about this mod that add Akatsuki? Where could I download it? 

 

SPB's work, and unfortunately anything SPB makes that is inspired by some game\anime immediately goes into the "You shall not have it" category.

AnnaFly

AnnaFly

Posted
Posted

Oh now I can see it, dam speedbuster shit that will never be released ever ever never! that modder doesn't release certain things, probably making it for a private market where they float it around on cdrom for x amount money at some corner market stall:-(

Hi ,

 

Yes ,  that's a SpeedBuster's release ( WIP as i know ) , i saw it a few time ago .

 

Now i don't know if the private files are for " friend " only but i think they are all only in japanese version since a long time.

 

I don't think it is already alviable.

 

I will check her blog soon .

 

Cheers

 

PS : and by the way , i think you will probably get some "issues" with that kind of boots ! ... ;°)

Zor2k13

Zor2k13

Posted
Posted

@annafly

 

Thanks a ton for your help with the boots, I found something that will work now so keep an eye on the player slave encounters thread I am gonna post some pics there soon:-)

AnnaFly

AnnaFly

Posted
Posted

@annafly

 

Thanks a ton for your help with the boots, I found something that will work now so keep an eye on the player slave encounters thread I am gonna post some pics there soon:-)

Greetings.

 

Hi ,Zor2K13.

 

Can you put the link , please ?

 

That's just because i never used any LAPF related mods , so i don't know what you are talking about .

 

Cheers.

AnnaFly

AnnaFly

Posted
Posted

Check this page scroll down a bit til you see the pics I posted there. http://www.loverslab.com/topic/15074-player-slave-encounters-v0694-updated-23-aug-14/page-84

Hi

 

Ok the ones from the post 1680 ? 4 pictures of yours .

 

By the the i think there is already some Growlf Chain in your Apachii mod ... ( i only have some folders from 2 different Apachii's  versions on this machine , not all  ... so  i cannot check them  to be sure ).

 

If you are looking for some " BDSM " parts , the Skull Breaker folder ( armors section in Appacii mod) have some interesting part ( Skulls you can use on " your Boots" :D  but also the belt are interresting for a BDSM look ... they are in 3 separatred meshes , so pertfect to adjust them to a body . )

 

Of course i suppose you already got since a long time the outfit from Brideyna's Fetich ? The original meshes are " MovingBreast " but the Fore version of the Sexywalk is both compatible BBB & Moving breasts .

 

And someone else ( not only the Saaya 's convertion ) did another " BBB " version .

 

But Growlf is an excellent base for such a thing ... a must have .

Unfortunately he never realease his last Hot body 6.0 ( and Hot Clothes 6  ... " Coming soon "  he said a long time ago ...Ouhhh , Ouhhh  ) ... i was wondering if he would follow the way Petrovitch keep with his Body (  " Dream Girl " previously created for Oblivion but never as a public release - ouh ouhhh ..too  )  but i don't think so.

 

Cheers.

Zor2k13

Zor2k13

Posted
Posted

Looks like a mashup of a bunch of stuff. I have seen the different pieces in different mods all over the place but I don't think that is just one mod it is cobbled together for sure so you won't find it all in one place. The knife on the back with the straps was on rembrandt site as 3/4 sleeves something something and the leg belt has been used everywhere like korana's lock breaker for example. The boots are from some crusader mod on nexus and the other stuff could be from anywhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...