Temphyx Posted May 19, 2021 Share Posted May 19, 2021 @Just Don't Thank you! Damn, I've struggled with that. My deepest condolences for Sophia, I've also struggled long and hard to protect Zora Fair-Child in my Lexy build - ancillary damage and friendly fire can be tragic. @Maligus If .NET config is set up right, ctd's should give you a folder/subfolder/file : NetScriptFramework/Crash/Crash_2021_5_18_#-#-#.txt or something similar. The Breezehome screenshot shows something is overwriting Breezehome by Lupus. That's the annoying vanilla firepit that's trying to burn your rug. 1 Link to comment
Maligus Posted May 19, 2021 Share Posted May 19, 2021 @Tempfiks Thanks for the narrowing down on breezehome, now to just figure out where I should have that mod in the load order. As for the crash file, the folder is there but it's empty. I disabled undead being vaporized in the MCM for FEC and so far have not replicated the CTD since, still watching though to see if it was something else causing it. Link to comment
Temphyx Posted May 19, 2021 Share Posted May 19, 2021 If you are following Aylis' (wonderfully unique) guide, the installation order for BreezehomeByLupus.esp should show up somewhere around +/- 90 something priority depending on the options you chose. Strongly suggest doing the build exactly as it's described (and playing it) before adding mods! Just to be clear, not all crashes trigger a .net crash file, but your description suggests it should, so check the config (but hope it doesn't happen again) @wollboi Apologies, I cited Just Don't and meant to send my Sophia condolences to you - hope you had a recent save... Link to comment
Maligus Posted May 19, 2021 Share Posted May 19, 2021 @Tempfiks Thanks for all your assistance on this So First Breezehome by lupus is at 93 in the load order, I've not added any mods that alter the homes etc. Everything should be near exact the same as the full list here. Spoiler As for the crash logs I checked the config file for it and everything is enabled so not sure why nothing is coming out unless it's not an error that is showing up Spoiler Edit: had a seperate crash just happen and it generated a crashlog which was unrelated to the previous oneCrash_2021_5_18_22-40-13.txt Link to comment
Aylis Posted May 19, 2021 Author Share Posted May 19, 2021 @Maligus 1. Big pics still belong in spoilers. 2. Make sure you have both patches (shadows and embers) installed. 3. There's an entry about this in the bugs section of that mod. 2 Link to comment
Temphyx Posted May 19, 2021 Share Posted May 19, 2021 9 hours ago, Maligus said: @Tempfiks Edit: had a seperate crash just happen and it generated a crashlog which was unrelated to the previous oneCrash_2021_5_18_22-40-13.txt Not all crashes show up in .net, you may want to look at SKSE logs, too -check the sticky for FEC on nexus about that. Run ReSaver and see where any hanging threads lead, but take care what you remove. re-Read Everything On The First Page of this guide. The crash you posted above says you were tangling w/ Yrsarald Thrice-Pierced up in Windhelm - careful db! You might go over your High Poly NPC Overhaul installation and make sure you have the right versions and patches and you may want to reinstall there. Make sure XP32skeleton and its fixed scripts are in the right place/ version and active. Then maybe run Bodyslide, Fnis, Nemesis again just to be safe. Hopefully, someone else here has better suggestions, good luck. Link to comment
akadeadpool Posted May 19, 2021 Share Posted May 19, 2021 13 hours ago, wollboi said: (I wish FEC didn't cause my followers damage with the residual fire/electricity effects. Sofia didn't deserve to go out like that.) FEC MCM has options to turn off damage from Fire and Electrocute effect. Link to comment
Mittelat Posted May 19, 2021 Share Posted May 19, 2021 @Aylis So i finally finished the setup and started the game. Good things first. It acutally runs. NO CTD yet and the ENB works - Great! But now comes the bad. Even though im happy that most mods seem to work flawlessly, i super bummed about the problems with the roads. I hoped to finally being able to play after spending over 20 hours on modding it. All of my roads look just look like crap. I guess something overwrites blended roads. I see no stone texture, just dirt. Also my map looks horrible. I've found a post from you on this topic and you somehow fixed it. - I just hope it is somewhat fixable. I can live with the map beeing as it is. But the roads completly ruin the immersion. Greatful for any tipps. Going to sleep now. Need some rest. Spoiler Spoiler The map just looks horrible. Absolute Doo-Doo Spoiler enb2021_5_19_21_47_38.bmp enb2021_5_19_21_47_38.bmp Link to comment
Mittelat Posted May 19, 2021 Share Posted May 19, 2021 @Aylis So i finally finished the setup and started the game. Good things first. It acutally runs. NO CTD yet and the ENB works - Great! But now comes the bad. Even though im happy that most mods seem to work flawlessly, i super bummed about the problems with the roads. I hoped to finally being able to play after spending over 20 hours on modding it. All of my roads look just look like crap. I guess something overwrites blended roads. I see no stone texture, just dirt. Also my map looks horrible. I've found a post from you on this topic and you somehow fixed it. - I just hope it is somewhat fixable. I can live with the map beeing as it is. But the roads completly ruin the immersion. -->my current modlist https://modwat.ch/u/Mittelat Greatful for any tipps. Going to sleep now. Need some rest. Spoiler Spoiler The map just looks horrible. Absolute Doo-Doo Spoiler Link to comment
wollboi Posted May 19, 2021 Share Posted May 19, 2021 @akadeadpool ... Damn it. Didn't see that. Sofia, I can only blame myself. (But she was kind of annoying and stood way too close to me anyway.) @Mittelat Turn off More Dirt on the Roads. I didn't like it either. I ended up only being able to tell if I was on a road if I saw a lamppost. No idea about the map though, it looks fine to me. Link to comment
Temphyx Posted May 20, 2021 Share Posted May 20, 2021 Question: went to return Meridia's Beacon and get that pita quest out of the way. Beacon looks good, everything runs smooth, but Meridia is a floating wig in an otherwise entertaining circle of light. Anybody know what might be missing/happening? - call me lazy this time... BTW, dungeons and caves are totally rich in this build, lovin it. Link to comment
Mittelat Posted May 20, 2021 Share Posted May 20, 2021 19 hours ago, wollboi said: @akadeadpool ... Damn it. Didn't see that. Sofia, I can only blame myself. (But she was kind of annoying and stood way too close to me anyway.) @Mittelat Turn off More Dirt on the Roads. I didn't like it either. I ended up only being able to tell if I was on a road if I saw a lamppost. No idea about the map though, it looks fine to me. Do i have to redo the bashed patch and DynDOLOD? Take a close look at my world map especially in the parts more south west. I looks like a mudhole. Not definition or trees at all. Found a screenshot of aylis map. Shouldn't it look like the picture below. Spoiler @Aylis I want to propose to add the dollowing mos to the list, if possible. In my opinion it adds a lot to immersion. https://www.nexusmods.com/skyrimspecialedition/mods/43494 Spoiler Here is a video showcase of the mod by brodual. Spoiler Link to comment
ascendentkunglao Posted May 20, 2021 Share Posted May 20, 2021 Did anyone ever figure out getting KS hair physics? or any alternates that we can use? Link to comment
akadeadpool Posted May 20, 2021 Share Posted May 20, 2021 10 hours ago, Tempfiks said: Question: went to return Meridia's Beacon and get that pita quest out of the way. Beacon looks good, everything runs smooth, but Meridia is a floating wig in an otherwise entertaining circle of light. Anybody know what might be missing/happening? - call me lazy this time... use this patch for High Poly NPCs @ascendentkunglao KS hair physics patch works for most NPCs, some npcs get glitch which stretch hair but you can use xEdit to revert their hair to use non physic wig. So far there's only Ysoldas' wig is problematic. Link to comment
maltodaxtrin Posted May 20, 2021 Share Posted May 20, 2021 Question, why is this 2 different mods ? (Optional) DAR - Diverse Equipment Normal Attack DAR - Diverse Random Normal Attacks I looked at them and they look pretty similar, if not exactly the same in some instances. They were made by the same person. Won't some of them overlap/get overwritten? Link to comment
ascendentkunglao Posted May 20, 2021 Share Posted May 20, 2021 5 hours ago, akadeadpool said: use this patch for High Poly NPCs @ascendentkunglao KS hair physics patch works for most NPCs, some npcs get glitch which stretch hair but you can use xEdit to revert their hair to use non physic wig. So far there's only Ysoldas' wig is problematic. Thanks deadpool when you say the KS Hair physics patch what mod are you referencing? Link to comment
Insertthyname Posted May 20, 2021 Share Posted May 20, 2021 How do I find the mods affecting a specific cell with SSEEdit (or something like SSEEdit)? I looked it up, and it said to use Ctrl + Shift + F and enter the cell, but after I do that, nothing happens. Link to comment
Aylis Posted May 20, 2021 Author Share Posted May 20, 2021 (edited) Previous Update Updating status to '3.1.9'. Yes, the modlist on page #1 has also been updated. Miniupdate before i loose track of the mods. RERUN for an update: FNIS Nemesis Wrye Bash Added mods SKSE Skyrim Priority SE Physics and Animation Immersive Interactions Override Resistances Rescaled Patches High Poly NPC Overhaul - Faction armor patch ?This patch is for HPNPC Overhaul 2.0 only. High Poly NPC Overhaul - Guard Armor Replacer Patch ?This patch is for HPNPC Overhaul 2.0 only. High Poly NPC Overhaul - MLU Patch ?This patch is for HPNPC Overhaul 2.0 only. Edited June 11, 2021 by Aylis 3 Link to comment
Temphyx Posted May 20, 2021 Share Posted May 20, 2021 1 hour ago, Insertthyname said: How do I find the mods affecting a specific cell with SSEEdit Not sure I'm much help on this, just shooting in the dark, but if you know you have a valid ID (ie. you can coc to the ID in-game), first try it in the Form ID field ( make sure you have the right first two numbers if it's not vanilla) and see if it pops up. It sounds like you want to filter for conflicts once you have a valid ID, and then track it down from a mod you know it's in. If none of this helps, my apologies, maybe someone else can jump in on it. @akadeadpool Thanks! @Aylis !! Always two steps ahead, thanks for the update. Link to comment
nuri49711 Posted May 21, 2021 Share Posted May 21, 2021 On 5/19/2021 at 2:53 PM, Mittelat said: @Aylis So i finally finished the setup and started the game. Good things first. It acutally runs. NO CTD yet and the ENB works - Great! But now comes the bad. Even though im happy that most mods seem to work flawlessly, i super bummed about the problems with the roads. I hoped to finally being able to play after spending over 20 hours on modding it. All of my roads look just look like crap. I guess something overwrites blended roads. I see no stone texture, just dirt. Also my map looks horrible. I've found a post from you on this topic and you somehow fixed it. - I just hope it is somewhat fixable. I can live with the map beeing as it is. But the roads completly ruin the immersion. -->my current modlist https://modwat.ch/u/Mittelat Greatful for any tipps. Going to sleep now. Need some rest. Reveal hidden contents Reveal hidden contents The map just looks horrible. Absolute Doo-Doo Reveal hidden contents I use a quality world map and get broken, blocky roads with LOD generations. I have to place my map esp below my LODgen output to fix it. i don't know if LODgen has this feature but in dyndolod, unticking map LOD generation might provide a fix. you'd have to re-run all your LOD tools, though, I think in order to do that. As for your roads, are you using the regular Blended roads or Really blended roads? and is it possible you have landscape/area textures that include roads installed beneath BR? Looking at More Dirt-Snow-Ash on nexus... it kind of looks like this mod is the culprit tbh. Link to comment
Aylis Posted May 21, 2021 Author Share Posted May 21, 2021 Added an additional information to 'More Dirt-Snow-Ash'. Hopefully the best choice is now more obvious... ________________________________________________ Is it just me or is the site wonky again? I run into timeouts with every post i make. Link to comment
akadeadpool Posted May 21, 2021 Share Posted May 21, 2021 17 hours ago, ascendentkunglao said: Thanks deadpool when you say the KS Hair physics patch what mod are you referencing? From this High Poly NPC Overhaul - Resources, For using xEdit to match patch, there's ton of youtube videos for that. In my opinion, it's not too hard to make one for KS Hair patch. The hard part is to find out what record to edit. 1 Link to comment
Insertthyname Posted May 21, 2021 Share Posted May 21, 2021 18 hours ago, Tempfiks said: Not sure I'm much help on this, just shooting in the dark, but if you know you have a valid ID (ie. you can coc to the ID in-game), first try it in the Form ID field ( make sure you have the right first two numbers if it's not vanilla) and see if it pops up. It sounds like you want to filter for conflicts once you have a valid ID, and then track it down from a mod you know it's in. If none of this helps, my apologies, maybe someone else can jump in on it. @akadeadpool Thanks! @Aylis !! Always two steps ahead, thanks for the update. Thanks! Link to comment
Mittelat Posted May 21, 2021 Share Posted May 21, 2021 8 hours ago, Aylis said: Added an additional information to 'More Dirt-Snow-Ash'. Hopefully the best choice is now more obvious... ________________________________________________ Is it just me or is the site wonky again? I run into timeouts with every post i make. Currently rerunning DYDOLOD, while looking at the progress something cought my eye. Is it normal that Dyndo cannot find the map and replaces it with a flat one. Could that be the reason why my map looks all botched? Spoiler Link to comment
Just Don't Posted May 21, 2021 Share Posted May 21, 2021 11 hours ago, Aylis said: Is it just me or is the site wonky again? I run into timeouts with every post i make. It's been like that for a couple of days now (there are some posts about it in Community>General/Announcements). What I do is post/edit a reply, wait a couple of seconds and hit F5, that shows my message without errors or waiting too much. Now, these mods already are in the front page, but I'll mention them either way. Skyrim Priority SE. It may be placebo effect, but since using it I've been with stable 60 FPS in places where I usually had ~50. Also its code is very simple and I don't see any drawbacks, so I'll keep it for more testing. Simple Dual Sheath. I was using Ecotone's DSR, but this is pure skse plugin magic with no patches, additional meshes or even MCM. I've been using it for quick tests and it seem to do very well. 5 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now