SexLab P+

[GoosePeelings]

11 hours ago, KentuckyExpat said:

I'm having an issue that I think is SexLab P+ related. When I start an animation, a small black bar shows up at the top left of the screen. Unfortunately, its position partial covers an area where additional messages are supposed to show, making  it difficult to read those messages. As near as I can tell, there is no provision to change the position of that black bar.

Also, if someone could direct me to where there is a clear explanation of how to navigate the new setup, it would be very helpful.

 

Their GitHub page has pretty good instructions as well as links to animation mods that have SLSB conversions.

[KentuckyExpat]

5 hours ago, GoosePeelings said:

 

Their GitHub page has pretty good instructions as well as links to animation mods that have SLSB conversions.

Thanks, but what I am looking for isn't installation, it's using the dropdowns, +/- options, etc. When an animation is running and you press 'E', and dropdown appears below the black bar I referenced in my previous post. The dropdown seems to offer several options for affecting the PC and the NPC actions. Unfortunately, I can't seem to access the options. Those are the instructions I'm hoping someone can direct me towards.

[Benmc20]

On 7/9/2025 at 11:49 PM, Yinkle said:

SLEN works fine here with the latest SL P+ version from Discord. Many other mods working fine too. I suspect that many of the Stats will be broken, though. For example, I noticed that "LastSexPartner(akActor)" returns the wrong value. The only mods that don't work, aren't using the API correctly. I was surprised that many legacy functions still work.

In which Discord ? Haven't seen a link in the main page of this mod.

[GoosePeelings]

1 hour ago, Benmc20 said:

In which Discord ? Haven't seen a link in the main page of this mod.

 

The comments on the Testing page mention the Discord. The LoversLab page here does have a link to it, I was looking for it too.

 

Some links if you want to support me:

• Patreon: Scrab Joséline | Patreon
• Ko-fi:  Scrab | Ko-fi

 

Discord Link for good measure:

• Citadel

[Fraying9981]

Hi, i'm trying to make the switch from normal Sexlab.

 

I get this warning. Does anybody know the cause?

 

 

Here is what I did:

- I installed SLP+ and Automated SLSB Conversions 0.9d. for Automated SLSB Conversions 0.9d, I enabled 'all modules' and some of the animation packs.

- I deactivated SLAL as instructed

- I left animation limit fix checked

- I did NOT add ANY new packs. I have been using normal SL with various packs without issues for 7 mo+

 

Thanks in advance for your tips

 

 

Edited July 13, 2025 by Fraying9981

[Kharadin]

Excuse me, I am using the 2.15.6 version of P+ with current AE version of Sexlab and Skyrim, with all the requirements, mod manager is MO 2. Always run Pandora Engine, have SLSB conversion packs etc. However, strangely, I don't think SexLab registers any of the animations that come with, well, default SexLab, like Zyn, Mitos animations. If I don't use SLSB conversion, I get a popup saying that SKSE - SexLab - Registry directory is empty or does not exist (which is true). Could someone please point me to what might be the problem and how to solve it? Or does P+ only support animations which have SLSB packs currently?

[Someone92]

p+ itself does not have any animations. All animations you can use have to come from animation packs.

 

And yes, animations from legacy SexLab and just SLAL animation packs are not accessible to p+ as it requires SLSB config files to find the animation files.

Edited July 14, 2025 by Someone92

[GoosePeelings]

15 hours ago, Fraying9981 said:

Hi, i'm trying to make the switch from normal Sexlab.

 

I get this warning. Does anybody know the cause?

 

 

Here is what I did:

- I installed SLP+ and Automated SLSB Conversions 0.9d. for Automated SLSB Conversions 0.9d, I enabled 'all modules' and some of the animation packs.

- I deactivated SLAL as instructed

- I left animation limit fix checked

- I did NOT add ANY new packs. I have been using normal SL with various packs without issues for 7 mo+

 

Thanks in advance for your tips

 

 

 

I would recommend switching to Pandora Behaviour Engine, it lets you use both FNIS and Nemesis animations.

[yaboiied]

when i launch the game i get a warning that say unable to open data\skse\sexlab\registry .was it not installed correctly or is this a folder i need to create

[yaboiied]

8 minutes ago, yaboiied said:

when i launch the game i get a warning that say unable to open data\skse\sexlab\registry .was it not installed correctly or is this a folder i need to create

nvm i didnt read smh

[Fraying9981]

On 7/14/2025 at 4:04 PM, GoosePeelings said:

I would recommend switching to Pandora Behaviour Engine, it lets you use both FNIS and Nemesis animations.

 

thanks, I've made the switch. let's see if I get crashes.

Edit: it did fix most CTD issues that were probably animation related

 

the mod seems to be working well, the performance improvement is impressive!

Did someone find a way to customize the interface? Having it show up where notifications pop is not the most convenient.

Edited July 18, 2025 by Fraying9981

[Gilmor-nk]

On 7/16/2025 at 12:08 AM, Fraying9981 said:

 

thanks, I've made the switch. let's see if I get crashes.

 

the mod seems to be working well, the performance improvement is impressive!

Did someone find a way to customize the interface? Не очень удобно, когда он появляется там, где появляются уведомления.

Dear Diary + Untarnished UI. Moves messages to the upper right corner.

[Helkyte]

Hello,

 

Trying to get P+ to work for me and the issue I've run into is very puzzling to me.

 

Everything is installed correctly according to the installation guide, including animations and the SLSB configs for them. I'm using Pandora and have run it for the animations.

The animations are all appearing in the sexlab registry correctly.

 

When I trigger a sexlab scene, the following happens: P+ loads it's scene with the orgasm bar and stage select etc., the character lines up correctly, strips, and then just stands there as the scene progresses. No T pose, character stands at idle like normal. Expressions and voice/sound lines all happen correctly through the scene, but no actual animation. The scene doesn't end early, it progresses through the stages as normal without actually animating anything. Any furniture or props for the given animation do not appear. The scene ends and the character redresses as normal.

 

In the papyrus sexlab appears to call a scene correctly as far as I can tell, selecting the animation randomly from the list and stating which animation it's playing "Leito Female Toy Anal" for example. It selects the actors correctly, and lists the animation as starting, progressing, and ending at appropriate times.

 

Any help? 

 

 

 

 

Papyrus.0.log

[Gilmor-nk]

3 hours ago, Crota said:

Планируется ли вернуть в P+ функцию отключения высоких каблуков из оригинальной секс-лаборатории?

Это действительно раздражает, когда надеваешь неудобную обувь и все анимации смещаются.

I use this one: RaceMenu High Heel Sexlab Patch.

[Gilmor-nk]

1 hour ago, Helkyte said:

Здравствуйте,

 

Я пытаюсь настроить P+ под себя, и проблема, с которой я столкнулся, ставит меня в тупик.

 

Всё установлено правильно, в соответствии с инструкцией по установке, включая анимацию и конфигурации SLSB для неё. Я использую Pandora и запустил её для анимации.

Все анимации корректно отображаются в реестре sexlab.

 

Когда я запускаю сцену в секс-лаборатории, происходит следующее: P+ загружает сцену с индикатором оргазма, выбором этапа и т. д., персонаж правильно выстраивается, раздевается, а затем просто стоит на месте по мере развития сцены. Поза Т не используется, персонаж стоит неподвижно, как обычно. Выражения лица и голосовые/звуковые реплики воспроизводятся правильно на протяжении всей сцены, но анимация отсутствует. Сцена не заканчивается раньше времени, она проходит все этапы как обычно, но ничего не анимируется. В данной анимации не отображается никакая мебель или реквизит. Сцена заканчивается, и персонаж одевается как обычно.

 

Насколько я могу судить, в папирусе sexlab правильно называется сцена: анимация выбирается случайным образом из списка и указывается, какая анимация воспроизводится, например «Leito Female Toy Anal». Анимация правильно выбирает актёров и указывает, когда она начинается, продолжается и заканчивается.

 

Какая-нибудь помощь?

 

 

 

 

Papyrus.0.log 292,73 КБ · 0 загрузок

Most likely you have the wrong versions of animation mods. install only those versions that are specified when installing Automated.SLSB.Conversions.

[fakobo5321]

Is there a way to disable/remove this message:

"you are using an outdated version of skyrim and scaling has this been disabled to prevent crashes"? I am on 1.597

[sobradinho]

On 6/10/2025 at 8:06 PM, ElliottHale394 said:

Hello, I'm having an issue where P+ doesn't seem to save which animations are toggled on or off. With regular Sexlab, I could just toggle the ones I wanted, save my file, and it would save unless I reset the animation registry. With P+ installed, the MCM toggles all animations on when I reload my file, even after I've gone through and toggled them off. Is this a known issue that's being resolved, or am I missing some place in the MCM where I can save my toggled animations permanently?

 

Having the same issue, has there been a solution to this? 

[Someone92]

20 hours ago, Helkyte said:

When I trigger a sexlab scene, the following happens: P+ loads it's scene with the orgasm bar and stage select etc., the character lines up correctly, strips, and then just stands there as the scene progresses. No T pose, character stands at idle like normal.

When you install the SLSB conversions patch, make sure to only install the patches for the SLAL animation packs you have actually installed.

Otherwise p+ will try to use animation files that do not exist, which causes actors to just stand there in the idle position during sex.

[Fraying9981]

On 12/11/2024 at 1:08 PM, skfxgp said:

Just a heads up if anybody is getting the "Failed to start animation" error -16

 

The mod "Knockout and surrender" with "melee knockback" breaks P+, took me hours to find the problem

 

Is it still true as of the current version?

Did you have any overwrites from KO surrender + melee knockback over SLP+ back then?

[MiTello]

Any word on how to install new voicepacks? Trying to get Vanilla Voices to work, but to no avail. Legacy registering doesn't do the trick.

[asdt123123]

Any way to disable collisions? Seems like actors push eachother around. Not talking about SMP collision. It's like an actor's body pushes another actor's body away. 

[Silvist]

Hello all, this is my first time using P+, so I might be missing dependencies.

I just followed Misscorruption install instructions (off github), when installing it. It seems to be working fine with Pandora, but I seem to be running into issues with creatures. The animations still load, but the creatures don't see to do anything. Here's my load order:

 

Spoiler

 

Any help would be appreciated. Thank you.

[infusion021]

hello,im using the latest version of sexlab p+,i enable the cum effect option in mcm and leave the effect duration as

default,cum shows on time but it seems will never get off,no matter how long i wait... i have tried every debug button in mcm and nothing happened,does anyone know how to solve it?

[Rensome]

Hey, first time user, everything seems to be working fine, only there are no voices registered. Not sure what the issue could be, maybe I'm just an idiot.

[GoosePeelings]

9 hours ago, Rensome said:

Hey, first time user, everything seems to be working fine, only there are no voices registered. Not sure what the issue could be, maybe I'm just an idiot.

 

I had this too for quite a while. I think the 2.15.7 version fixes this? It's in their discord, Citadel, linked on the mod page.