Jump to content

Recommended Posts

Posted
5 hours ago, Matt44 said:

Are there any specific know causes that prevent the sliders in MCM from displaying the morph name. It only occurs when using some specific mods but I can't find any obvious incompatibility issues between the two to result in this.

Go to bed sometimes causes this mod to panic, unsure why, did you find another mod that does this?

Posted
6 hours ago, Murphiee said:

Go to bed sometimes causes this mod to panic, unsure why, did you find another mod that does this?

LMAO - Tolls and Crimes was the one I had the issue with, it occurs immediately once I install the mod and load the save. I think I narrowed it down to 5 scripts from the mod so I'm trying to figure it out over there, but I wanted to check here for any notable causes since searching the issue didn't yield me much despite a few other people bringing up similar problems previously.

Posted
On 7/4/2026 at 2:27 AM, Aquagen said:

Recompiled 3ba ovibody with addition of single "Oviposition" slider (you need to put it below CBBE 3BA and build body in bodyslide)

Possible usage?
  

"Outputs": [		
		{	"Name": "Chaurus",
			"Id": 200,
			"ActorArchetype": 14,
			"T1Milk": "0xFB95|Sgo4If.esp",
			"T2Milk": "0xFB96|Sgo4If.esp",
			"T3Milk": "0xFB97|Sgo4If.esp",
			"OverrideMilk": true,
			"Semen": "0x3DE2|SGO4.esp",
			"LoadSize": 20,
			"IsOviposition": true,
			"OutputArchetype": 10,
			"Gems": "0x3AD56|Skyrim.esm",
			"GemMin": 5.0,
			"GemMax": 9.0,
			"Rate": 1.5,
			"IncubationEffect": "0xC6204|Sgo4If.esp",
			"BirthFaction": "",
			"Normal": "",
			"MorphOverride": "Oviposition"		
https://www.virustotal.com/gui/file/7ce0d8309d706bcb1c97027a3d65fd524db537417942f881dddaf046db45a854?nocache=1

3BA Ovibody.7z 8.83 MB · 16 downloads

This appears to be working for the new mesh shape, but I can't figure out how to get the pregnant belly slider to work with it. Is there a way to enable both sliders?

Posted
2 hours ago, Matt44 said:

This appears to be working for the new mesh shape, but I can't figure out how to get the pregnant belly slider to work with it. Is there a way to enable both sliders?

Combine them in outfit studio.

3 hours ago, sunhawken said:

What are the morphs used in these mods screenshots? The inverted nipples?

Custom morphs, but you can get something similar with 3BA invert

Posted
13 hours ago, Murphiee said:

Combine them in outfit studio.

Custom morphs, but you can get something similar with 3BA invert

Do you mean combine the two sliders? I didn't realize that was possible.

Posted
11 hours ago, Matt44 said:

Do you mean combine the two sliders? I didn't realize that was possible.

its called Coalesce slider or something.

Posted (edited)
45 minutes ago, Murphiee said:

its called Coalesce slider or something.

Thanks, that was the one, I wasn't sure before because of how little info there is available for that tool but it's working now.

Edited by Matt44
Posted

Are the 2 bottom files on the mod dowload page (under download this file) and the prerequisites listed all that is sufficient to run this mod?  Is another version of SGO required?  I don't understand the term "integration fork".  Does that mean that's the full mod, or that other things are required for the mod itself?

Posted
7 hours ago, ekw070 said:

Are the 2 bottom files on the mod dowload page (under download this file) and the prerequisites listed all that is sufficient to run this mod?  Is another version of SGO required?  I don't understand the term "integration fork".  Does that mean that's the full mod, or that other things are required for the mod itself?

Is there something in the ###Installation: part that is confusing?

Posted
11 hours ago, Murphiee said:

Is there something in the ###Installation: part that is confusing?

 

 

I understand this part:

 

I just didn't understand if there was something not mentioned because of the words integration fork.  I wasn't sure if Integration fork implied something that I should know, but don't.  If I just need those things, and there isn't some other thing, then I got the things I needed.

Posted
18 hours ago, ekw070 said:

 

 

I understand this part:

 

I just didn't understand if there was something not mentioned because of the words integration fork.  I wasn't sure if Integration fork implied something that I should know, but don't.  If I just need those things, and there isn't some other thing, then I got the things I needed.

Integration fork is just the name of this fork, as its meant to integrate with sexlab and other mods more than the original mod did.

Posted

Just want to report an odd thing. Im on an older version 1.9.4 of this mod, (I stuck to this 1.9.4 version simply out of laziness). Anyways the odd thing out of nowhere on my save SGO decided to just well... shit itself. Wanted to enable the mod because I forgot to enable it ingame and when I opened the MCM to turn the mod on what greeted me was just nothing. Entire SGO mcm menu empty. Waited a few mins still empty, reloaded a few times still empty. I guess somewhere something caused it to just fail to initialize itself. God knows what caused it and its a first time occurence, never experienced this. Reloaded an older save on the playthrough at it works. Sure its an odd occurence.

Posted

Hey there, I finally updated my skyrim so felt confident enough to update SGO, thanks for your continued work :)

 

Only issue is im still trying to figure out the changed features, mainly the "1 gem only" change, which Im not bothered by

So, my question was, does this revision support gem leveling all the way to black? Currently, im birthing a gem and it only goes up by 1 tier, so it would take a LONG time for it to grow up lets say

 

Also, can you add a setting to adjust the pregnancy affects, mainly move speed with the weight and milk etc, I just feel that if you have a petty gem going up 1 stage, doesnt feel right that my movent speed is reduced 25%...

Posted
On 9/5/2026 at 6:24 PM, OrcishOatmeal said:

Hey there, I finally updated my skyrim so felt confident enough to update SGO, thanks for your continued work :)

 

Only issue is im still trying to figure out the changed features, mainly the "1 gem only" change, which Im not bothered by

So, my question was, does this revision support gem leveling all the way to black? Currently, im birthing a gem and it only goes up by 1 tier, so it would take a LONG time for it to grow up lets say

 

Also, can you add a setting to adjust the pregnancy affects, mainly move speed with the weight and milk etc, I just feel that if you have a petty gem going up 1 stage, doesnt feel right that my movent speed is reduced 25%...

If you insert a gem it will automatically upgrade to the next tier, and at higher levels you might even upgrade tier multiple times.

the movement speed debuff is already configurable, see mcm.

On 9/6/2026 at 11:58 AM, R3nko said:

I failed to understand the enormous amount of options on the MCM…

hover over options and a quick explanation is provided, or read through documentation which is fairly up to date.

Posted (edited)

here's updated configs for PAIA Expansion that work with the new versions of SGO4:IF... it was very simple! all i had to do was update the plugin name and form IDs

 

also these configs are from Beeing Female NG, so if you're using that mod with this one for whatever reason, then just make sure these files overwrite the ones from BF. If you're not using BF, then it just won't do anything so don't worry! you can use these configs regardless 👍

 

updated PAIA configs for SGO4IF.zip

Edited by Connector196
changed file format to .zip for easier access
Posted (edited)

Why the widget font size is capped to 5 in MCM?

 

And the "SexLabSays = Main.SexLab.GetSex(Who)" in SGO4_QuestUtil_Main.psc should be "SexLabSays = Main.SexLab.GetGender(Who)".

Edited by elzee
Posted
16 minutes ago, elzee said:

Why the widget font size is capped to 5 in MCM?

 

And the "SexLabSays = Main.SexLab.GetSex(Who)" in SGO4_QuestUtil_Main.psc should be "SexLabSays = Main.SexLab.GetGender(Who)".

you can manually change it in config, i don't use widget so didn't see a need to change it.

 

This mod is coded for P+, GetGender is a legacy function that is no longer used by P+.

10 hours ago, lundehund said:

not sure if this works for sexlab 1.66b - keep getting "preg abort: no valid ovens"? race is default nord.

try disabling P+ compatibility.

Posted

Hello! I'm not seeing essences show up for me either as vendor items or loot. Possibly as I'm using less loot and hardcore economy. I wanted to check exactly what the levelled lists are attached to and increase the chance but the use info for eg corruptionmainloot shows no users. Is it assigned to vendors/loot some other way or am I not loading a dependency that is messing with the CK and SSEedit?

 

Thanks!

Posted
36 minutes ago, Murphiee said:

you can manually change it in config, i don't use widget so didn't see a need to change it.

 

This mod is coded for P+, GetGender is a legacy function that is no longer used by P+.

try disabling P+ compatibility.

I see, thank you. But the font size 5 is too small. I think a value around 15 to 50  is reasonably appropriate.

Posted (edited)
4 hours ago, elzee said:

I see, thank you. But the font size 5 is too small. I think a value around 15 to 50  is reasonably appropriate.

il change max value for next version. meanwhile, you can manually edit Default.Json to force higher values.

 

  

4 hours ago, Sidereal said:

Hello! I'm not seeing essences show up for me either as vendor items or loot. Possibly as I'm using less loot and hardcore economy. I wanted to check exactly what the levelled lists are attached to and increase the chance but the use info for eg corruptionmainloot shows no users. Is it assigned to vendors/loot some other way or am I not loading a dependency that is messing with the CK and SSEedit?

 

Thanks!

It uses Skypatcher to inject into enemy drop loot.

Edited by Murphiee
Posted (edited)

so im pretty sure this is the version of the mod im using. im trying to edit the outputs for inserting gems. im basically trying to make it be: Petty->FullPetty->Lesser->FullLesser              ->Common

instead of: Petty->Lesser->Common etc

 

but looking at the file "5_InsertOutputs.json" i dont see how the code identifies the gem thats inserted, i only see the id it chooses as an outputimage.png.9a1659f05548f16267dfd56d7e7f2b39.png 

(the output id is in "Gems" and its been edited to be the full version of the lesser gem, it was originally the empty lesser)

Edited by Neurax

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...