SoulGem Oven 4: Integration Fork

[Murphiee]

Just now, SantanaX said:

Thank you for your reply!

Yes I have tried following the FAQ, sadly changing enginefixes.toml (specifically scaleform) makes my game ctd when I open inventory, for some reason.

And after some testing it seems like it was WeightMorphs that overwrote the changes your mods wanted to do. Sadly.

 

Would it be possible to add a SLIF patch for only the breast/milk part of the mod?

Nothing that touches pregnancybelly or any other part of the belly that is.

If anyone would be up for doing that, that is...

If you let SLIF handle breast scaing, a few options in SGO4IF will break, Mainly automatic lactation offset setting, and cbpc physics scaling. If you are fine with this it shouldn't be too hard to make your own support for slif, but then you might as well disable SGO4IF breast scaling and let some other mod handle that.

[sekuzeku]

does anyone know the BodyNode for BHUNP?

(mod works fine with BHUNP)

 

also, if i want only CBPC scaling but my physics are already good can i only use the interpolation files?

Edited August 15, 2024 by sekuzeku

[Murphiee]

19 hours ago, sekuzeku said:

does anyone know the BodyNode for BHUNP?

(mod works fine with BHUNP)

 

also, if i want only CBPC scaling but my physics are already good can i only use the interpolation files?

yeah, you can just delete the interpolation files you don't want, or if you want to be safe, delete the content.

 

As far as i know there is no pregnant normalmap for BHUNP, but you managed to find one, open up any BHUNP body in outfit studio and check top right mesh names, those are the bodynode names.

[SantanaX]

On 8/14/2024 at 6:44 PM, Murphiee said:

If you let SLIF handle breast scaing, a few options in SGO4IF will break, Mainly automatic lactation offset setting, and cbpc physics scaling. If you are fine with this it shouldn't be too hard to make your own support for slif, but then you might as well disable SGO4IF breast scaling and let some other mod handle that.

 

Ah, well I rather don't want anything breaking. The morphing works great now, no other mods seems to be messing up any morphs at all so far, so all good.

 

However, something else I forgot to mention, I've never seen any kind of widget pop up so far? And I have all the requirments for it.

 

 

Thanks for your replies!

[Murphiee]

17 hours ago, SantanaX said:

I've never seen any kind of widget pop up so far? And I have all the requirments for it.

Widgets are weird since forever, Some issue in original SGO4. I have not touched them, nor do i use them.

[sekuzeku]

On 8/1/2024 at 5:13 PM, Sofian said:

im using Skyrim AE and i cant get the shout [SGO] Main menu to do anything everything else works exept that shout menu

radial menu wouldn't show for me either but i updated all requirements, then restarted the mod (Wipe All Data in Debug+ Mod Enabled in General)

 

whenever you start the mod test if the power to see if  the menu comes up before going to far.

 

make sure any chars with affected bodies have their sizes reset to default or they'll stay that way.

 

  

On 8/15/2024 at 12:43 PM, SantanaX said:

I've never seen any kind of widget pop up so far? And I have all the requirments for it.

might work for the widgets too, there's only 1: the Scanner

Edited August 17, 2024 by sekuzeku

[ronincaido]

Hi Murphie, I dont know how but I fix my problem with version 1.8 and that version is amazing.

 

I made a BHUNP conversion for Milker, if someone is interested just put it inside your bodyslide output carpet if you are in MO2.  And I share my sliders put the slider in "dse-soulgem-oven-vbeta8\configs\dse-soulgem-oven\settings" thats the carpet of the SGO you download from github.

Custom.rar Milker SGO BHUNP.rar

[MoBai636]

I just tried this mod but everything is unreliable, my game stutters every few seconds and I can't troubleshoot anything. . .

[Murphiee]

On 8/18/2024 at 9:09 PM, ronincaido said:

Hi Murphie, I dont know how but I fix my problem with version 1.8 and that version is amazing.

 

I made a BHUNP conversion for Milker, if someone is interested just put it inside your bodyslide output carpet if you are in MO2.  And I share my sliders put the slider in "dse-soulgem-oven-vbeta8\configs\dse-soulgem-oven\settings" thats the carpet of the SGO you download from github.

Custom.rar 545 B · 1 download Milker SGO BHUNP.rar 13.2 MB · 1 download

Glad to know its working.

18 hours ago, MoBai636 said:

I just tried this mod but everything is unreliable, my game stutters every few seconds and I can't troubleshoot anything. . .

Check the FAQ. But to be honest, it sounds like you have other issues with your current mod setup.

[MoBai636]

4 hours ago, Murphiee said:

很高兴知道它的工作原理。

检查常见问题解答。但说实话，听起来您当前的模组设置还存在其他问题。

This is too hard for me, I feel like I don't have any other conflicting modules and it's hard to troubleshoot the problem

[Murphiee]

12 hours ago, MoBai636 said:

This is too hard for me, I feel like I don't have any other conflicting modules and it's hard to troubleshoot the problem

Not much i can do to help in this case sadly. The FAQ post in the main page is as simple as debugging can get.

[Apap]

Hello, got a few questions about this mod:

 

-About milkers: the description reads that equipping one should increase the rate of production and automilk when full. I had one equipped for a while but it didn't seem to extract the milk on its own at all. I have the direct to inventory enabled and empty bottle needed disabled so theoretically it should be working. Does it matter when the milker is equipped? As in when the jugs are completely empty vs there is residual milk/ milk is being actively produced? 

 

On a similar note, would it be possible to register other items as milkers? There are some nice outfit mods out there with their own milker models and it would be cool if those could be used in sgo too. I think MME had a functionality like that. Maybe an idea for a future update?

 

-Womb tat: I noticed that sometimes it glows and sometimes it doesn't. Initially I thought that it's related to gem growth and it lights up when the gem is ready. I had one grown from lesser to black in order to test it but the tat didn't light up at all that time. Is there any particular criteria for the tat to start glowing? I'm also thinking I may just have some conflict with body overlays or something (got Blood and Dirt, Wet Function Redux and RASS)

 

Speaking of tats, it's a cool idea to apply them when corrupting. Could it also work for breasts and belly? Have tats applied to them when corrupting similarly to the womb? 

 

Thanks!

[Nyublia]

Hello. I want to ask if there is a way to put a maximum to the inflation, no matter how many mods i have for inflation. Example: i want inflation to stop when PregnantBelly is at 100% when i am using Fill Her Up and this mod at the same time. Is it possible?

[Murphiee]

On 8/23/2024 at 8:31 PM, Apap said:

Hello, got a few questions about this mod:

 

-About milkers: the description reads that equipping one should increase the rate of production and automilk when full. I had one equipped for a while but it didn't seem to extract the milk on its own at all. I have the direct to inventory enabled and empty bottle needed disabled so theoretically it should be working. Does it matter when the milker is equipped? As in when the jugs are completely empty vs there is residual milk/ milk is being actively produced? 

 

On a similar note, would it be possible to register other items as milkers? There are some nice outfit mods out there with their own milker models and it would be cool if those could be used in sgo too. I think MME had a functionality like that. Maybe an idea for a future update?

 

-Womb tat: I noticed that sometimes it glows and sometimes it doesn't. Initially I thought that it's related to gem growth and it lights up when the gem is ready. I had one grown from lesser to black in order to test it but the tat didn't light up at all that time. Is there any particular criteria for the tat to start glowing? I'm also thinking I may just have some conflict with body overlays or something (got Blood and Dirt, Wet Function Redux and RASS)

 

Speaking of tats, it's a cool idea to apply them when corrupting. Could it also work for breasts and belly? Have tats applied to them when corrupting similarly to the womb? 

 

Thanks!

Try spawning in some bottles and enabling the need for bottles, said option might be broken.

 

You should be able to just add the milker magic to any other item. Haven't tried, but in theory it should work fine.

 

Wombtat's start glowing when an actor is closing in on maximum fertility cycle. Might add some customization later, but this is how it works for now.

 

Breasts already get a subtle vein overlay when you get to higher levels, including a milk leaking effect while close to maximum capacity, you should be able to just edit those textures if you want something else.

 

14 hours ago, Nyublia said:

Hello. I want to ask if there is a way to put a maximum to the inflation, no matter how many mods i have for inflation. Example: i want inflation to stop when PregnantBelly is at 100% when i am using Fill Her Up and this mod at the same time. Is it possible?

No. Previously there was the SLIF patch, but this mod does too much for slif to be a viable solution.

[Arsus12]

Hi, I have a question, is there a way to make custom race use milk and semen of a vanilla race?

[jmacks928]

On 8/6/2022 at 3:48 PM, Murphiee said:

SoulGem Oven 4: Integration Fork

### Requirements

• dw's Pregnant Normal Maps: (Optional): https://www.nexusmods.com/skyrimspecialedition/mods/68977 Required for normalmap swapping, Choose the Fertility Mode + setup.

### Issues/FAQ:

Q2: Lighting while pregnant looks off!

A2: You have enabled normalmap swapping without installing the required normal map textures. Reinstall dw's Pregnant Normal Maps according to instructions in Requirements.

 

I'm having the issue shown in Q2 above. However, since "dw's Pregnant Normal Maps" is marked (Optional):

1. I chose not to install it

2. I did not enable normal map swapping.

3. I also looked all through the downloads at https://www.nexusmods.com/skyrimspecialedition/mods/68977 and could not find anything like "Fertility Mode +" setup

 

But, for some reason, it seems like some kind of normal map updating is happening anyway.

 

Is it possible to use this mod without messing with normal maps?

 

https://www.nexusmods.com/skyrimspecialedition/mods/68977 points to https://www.loverslab.com/files/file/23307-pregnancy-normalmap-swapper/, and that mod has installation instructions that are just ridiculously complex and probably beyond my modding knowledge.

Edited August 26, 2024 by jmacks928

[LustyWolf0721]

7 hours ago, jmacks928 said:

 

I'm having the issue shown in Q2 above. However, since "dw's Pregnant Normal Maps" is marked (Optional):

1. I chose not to install it

2. I did not enable normal map swapping.

3. I also looked all through the downloads at https://www.nexusmods.com/skyrimspecialedition/mods/68977 and could not find anything like "Fertility Mode +" setup

 

But, for some reason, it seems like some kind of normal map updating is happening anyway.

 

Is it possible to use this mod without messing with normal maps?

 

https://www.nexusmods.com/skyrimspecialedition/mods/68977 points to https://www.loverslab.com/files/file/23307-pregnancy-normalmap-swapper/, and that mod has installation instructions that are just ridiculously complex and probably beyond my modding knowledge.

Same here

[Murphiee]

14 hours ago, jmacks928 said:

 

I'm having the issue shown in Q2 above. However, since "dw's Pregnant Normal Maps" is marked (Optional):

1. I chose not to install it

2. I did not enable normal map swapping.

3. I also looked all through the downloads at https://www.nexusmods.com/skyrimspecialedition/mods/68977 and could not find anything like "Fertility Mode +" setup

 

But, for some reason, it seems like some kind of normal map updating is happening anyway.

 

Is it possible to use this mod without messing with normal maps?

 

https://www.nexusmods.com/skyrimspecialedition/mods/68977 points to https://www.loverslab.com/files/file/23307-pregnancy-normalmap-swapper/, and that mod has installation instructions that are just ridiculously complex and probably beyond my modding knowledge.

The Fertility mode setup is an option in the fomod. just install whichever file corresponds to your texture/base normalmap. and check the Fertiliy mode setup in the installer.

6 hours ago, lzy731 said:

Same here

I've had some problems toggling normalmap replacement, but not in this way, il add it to the list of issues.

  

17 hours ago, Arsus12 said:

Hi, I have a question, is there a way to make custom race use milk and semen of a vanilla race?

It should be possible in theory, but it's not something i have messed around with.

Edited August 27, 2024 by Murphiee

[jmacks928]

14 hours ago, Murphiee said:

The Fertility mode setup is an option in the fomod. just install whichever file corresponds to your texture/base normalmap. and check the Fertiliy mode setup in the installer.

 

 

Thank you very much for taking the time to help me out. I checked out one of the FOMOD installers for dw's Pregnant Normal Maps for CBBE 3BA and it does indeed have a "Fertility Mode +" checkbox during install.

 

I wasn't sure which FOMOD to choose because I never installed any special 3BA skin texture. So, I went ahead and installed Bijin Skin UNP and CBBE SE and then picked that FOMOD installer (the Bijin skin one) from dw's Pregnant Normal Maps for CBBE 3BA.

 

Things look a lot better now. Thank you! You saved me from removing this mod and trying to build a new load order with something else.

 

Hope this can help someone else too.

[jmacks928]

On 8/15/2024 at 2:43 PM, SantanaX said:

However, something else I forgot to mention, I've never seen any kind of widget pop up so far? And I have all the requirments for it.

 

I'm lucky I guess - the scanner widgets are working for me. Just for reference, the only widget requirement I see mentioned in the first post is iWant Widgets but this is what I actually have installed (in this relative order in MO2) in case it helps you:

 

• iWant Status Bars - https://www.nexusmods.com/skyrimspecialedition/mods/36460
• iWant Widgets - https://www.nexusmods.com/skyrimspecialedition/mods/36457
• iWant Widgets NG - https://www.nexusmods.com/skyrimspecialedition/mods/96410
• SLWidgets NG - 

[dracoman94]

On 8/21/2024 at 6:54 PM, MoBai636 said:

I just tried this mod but everything is unreliable, my game stutters every few seconds and I can't troubleshoot anything. . .

its because the tuning rate for the cbpc configs in the plugnplay are set to 300, you can either delete the configs from sgo and use your own configs, or go into each of them and add a # in front of each Tuning.rate 300 , to comment it out

[SantanaX]

On 8/28/2024 at 6:03 AM, jmacks928 said:

 

I'm lucky I guess - the scanner widgets are working for me. Just for reference, the only widget requirement I see mentioned in the first post is iWant Widgets but this is what I actually have installed (in this relative order in MO2) in case it helps you:

 

• iWant Status Bars - https://www.nexusmods.com/skyrimspecialedition/mods/36460
• iWant Widgets - https://www.nexusmods.com/skyrimspecialedition/mods/36457
• iWant Widgets NG - https://www.nexusmods.com/skyrimspecialedition/mods/96410
• SLWidgets NG - 

Wow, thank you very much!

Apparently I had actually downloaded all those files back in April but for some reason only installed IWantWidgets, likely for something else perhaps? But with your hints with this I'm going to install it right this time and see what happens!

 

Thank you! xD

[SantanaX]

On 8/29/2024 at 1:54 AM, dracoman94 said:

its because the tuning rate for the cbpc configs in the plugnplay are set to 300, you can either delete the configs from sgo and use your own configs, or go into each of them and add a # in front of each Tuning.rate 300 , to comment it out

 

Hi! Sorry to barge in but what file would that be? I'm having the same stutter issues and I've looked through both soulgem-oven and sgoif and can't figure out where to look :3

Originally I thought maybe it was some heavy scripting going on to update whatever's going on but I'd like to test this so if it helps.

[dracoman94]

30 minutes ago, SantanaX said:

 

Hi! Sorry to barge in but what file would that be? I'm having the same stutter issues and I've looked through both soulgem-oven and sgoif and can't figure out where to look :3

Originally I thought maybe it was some heavy scripting going on to update whatever's going on but I'd like to test this so if it helps.

open up the install folder of sgo, follow the folder path SKSE\plugins and then check each of these configs and comment out the tuning.rate, or just delete the configs all together since it's just a plugnplay but all the settings are for the mod authors body type and will cause the collision spheres to not match up with your body, and upon further inspection it looks like some of the tuning.rate settings in these configs were set to 60 which caused the cbp.dll to scan and apply physics at an interval of about .5 seconds followed by another scan at a different interval

[jmacks928]

47 minutes ago, SantanaX said:

 

Hi! Sorry to barge in but what file would that be? I'm having the same stutter issues and I've looked through both soulgem-oven and sgoif and can't figure out where to look :3

Originally I thought maybe it was some heavy scripting going on to update whatever's going on but I'd like to test this so if it helps.

 

I'm not experiencing this problem, but I did a search through all my installed mods.

 

I don't want lead you astray with false information  but I think the files are probably the files named CBPConfig_*txt that come with "SGO4 IF 1.8 PlugNPlay Config.rar".

 

If those are indeed the files (someone else will hopefully confirm), you can find them wherever you installed "SGO4 IF 1.8 PlugNPlay Config.rar" (assuming you installed it). Look in "SKSE\Plugins" in that mod's installation location for the files.

 

Edit:

There are also CBPConfig*txt files that get installed as part of "CBBE 3BA (3BBB)" https://www.nexusmods.com/skyrimspecialedition/mods/30174

Edited August 31, 2024 by jmacks928