[SSE] PRJ Furniture Pack - A DM3 Furniture Pack

[Hunterman141]

On 3/3/2023 at 2:22 PM, ajelloacc said:

Is this an issue you are having with any dm3 furniture or just the ones from this pack specifically?

Any furniture other then display model furniture

[acc loloa]

16 hours ago, Hunterman141 said:

Any furniture other then display model furniture

So all the DM3 furniture not from the original pack? Hmm make sure all the dependencies are up to date and for your corresponding version of skyrim. Also could you try load them on a new save?

[bogdanor]

When npc is on prj device then when sexlab animation  then when animation starts it is ok for few seconds then npc goes back to position where prj was..

[LePetitJardinet]

On 3/23/2022 at 9:52 PM, raksiois said:

When I try to put my pc into fuck machine, then these menu pop up but without any options and thus i cannot use this  machine. Is that machine do not support player character and works only on npc?

I've seen the same problem. But i don't want start a new save. If someone can help?

[liujie1986455361]

11111阿斯达

[JunWeng]

Accidentally found your addons project for DM3. Tested and working well in game.  Thank you so much for your effort!

[bugx2121]

How should I use these retrieved furniture? I cannot place them by left clicking like I do with furniture in DM3😵‍💫

[Grim God]

This is most likely a stupid question, but i never used any furniture mods before, so after i get them in my inventory how to I place them since you don't drop them and it says I cant equip when I just click on them?

[DonQuiWho]

2 hours ago, Grim God said:

This is most likely a stupid question, but i never used any furniture mods before, so after i get them in my inventory how to I place them since you don't drop them and it says I cant equip when I just click on them?

 

Assuming you haven't changed basic key assignments....

 

First, try facing the spot where you want them to be, and 'Drop' them from your inventory with the 'R' key

 

Then use the DM3 mechanics to fine tune the placement

 

Then click on the furniture object and use the DM3 mechanics menu to to selecvt 'Assign' an NPC, and go out and select the NPC, again using the 'R' key 

 

Good place to try is in Market Place at, say, Whiterun, and assign Carlotta or Ysolda

 

Hope that helps

 

DQW

[Grim God]

8 hours ago, DonQuiWho said:

 

Assuming you haven't changed basic key assignments....

 

First, try facing the spot where you want them to be, and 'Drop' them from your inventory with the 'R' key

 

Then use the DM3 mechanics to fine tune the placement

 

Then click on the furniture object and use the DM3 mechanics menu to to selecvt 'Assign' an NPC, and go out and select the NPC, again using the 'R' key 

 

Good place to try is in Market Place at, say, Whiterun, and assign Carlotta or Ysolda

 

Hope that helps

 

DQW

well my problem is the use the DM3 mechanics part I don't understand, I got all requirements and I know DM3 mod is running I even see it's dialog when talking to followers, if I drop the furniture the only option I see is E to take it

[DonQuiWho]

12 hours ago, Grim God said:

well my problem is the use the DM3 mechanics part I don't understand, I got all requirements and I know DM3 mod is running I even see it's dialog when talking to followers, if I drop the furniture the only option I see is E to take it

 

Sorry.  I should have said to find the furniture in inventory and 'Click' on your 'LEFT Mouse Button'

 

Anbd also, FIRST, before any of it works, you have to have, or have at one point had, the custom DM3 Crafting 'Book' in your inventory.  Have you got that from a blacksmith yet?

 

Start again, and.................

 

If you have the 'AddItemMenu' mod, use that to find the two mods, Basic 'DM3' and the 'PRJ' pack mod.  (If you don't have Additem menu, use the console to find and add items from these mods to your inventory)

 

Add the book and a few items from the DM2 mod, and a few items from the PRJ pack to your inventory. 

 

In game, check that they are in your inventory.  Note they all appear in the Inventory menu Misc Items (rightmost) category.  The basic DM3 items have a weight of '10', the PRJ items have weight '0'

 

Then find somewhere level, open the Inventory and use the Mouse LEFT CLICK button on each item to place them in front of you, and then see if their operating menus appear when you select them

 

That SHOULD work, but this is Skyrim ..... 😏

 

Whatever, hope that helps you

 

DQW

 

[Grim God]

56 minutes ago, DonQuiWho said:

 

Sorry.  I should have said to find the furniture in inventory and 'Click' on your 'LEFT Mouse Button'

 

Anbd also, FIRST, before any of it works, you have to have, or have at one point had, the custom DM3 Crafting 'Book' in your inventory.  Have you got that from a blacksmith yet?

 

Start again, and.................

 

If you have the 'AddItemMenu' mod, use that to find the two mods, Basic 'DM3' and the 'PRJ' pack mod.  (If you don't have Additem menu, use the console to find and add items from these mods to your inventory)

 

Add the book and a few items from the DM2 mod, and a few items from the PRJ pack to your inventory. 

 

In game, check that they are in your inventory.  Note they all appear in the Inventory menu Misc Items (rightmost) category.  The basic DM3 items have a weight of '10', the PRJ items have weight '0'

 

Then find somewhere level, open the Inventory and use the Mouse LEFT CLICK button on each item to place them in front of you, and then see if their operating menus appear when you select them

 

That SHOULD work, but this is Skyrim ..... 😏

 

Whatever, hope that helps you

 

DQW

 

Thank you for your help, but still can't get this to work, the only book I saw in there was "I'll Take The Display Model" I have it in my inventory and even read it, but still when I left click it just says can't equip item and doesn't place it. I don't know if you have anymore Ideas and I appreciate the help but so far it looks like it's just not going to work for me. I even uninstalled it all and reinstalled loaded and old save from before I ever had it in the game and still same result.

[DonQuiWho]

1 hour ago, Grim God said:

Thank you for your help, but still can't get this to work, the only book I saw in there was "I'll Take The Display Model" I have it in my inventory and even read it, but still when I left click it just says can't equip item and doesn't place it. I don't know if you have anymore Ideas and I appreciate the help but so far it looks like it's just not going to work for me. I even uninstalled it all and reinstalled loaded and old save from before I ever had it in the game and still same result.

 

I tried sending you my currently installed files, privately, in a PM, but that doesn't seem to work 🤔

 

There is a Hotfix for vbeta6 .....

 

dse-display-model-vbeta6-hotfix1

 

Have you go that installed?  I think I just overwrote the first file rather than adding it as a second MO2 file

 

BTW, you are using MO2, aren't you?

 

DQW

[JunWeng]

24 minutes ago, DonQuiWho said:

 

I tried sending you my currently installed files, privately, in a PM, but that doesn't seem to work 🤔

 

There is a Hotfix for vbeta6 .....

 

dse-display-model-vbeta6-hotfix1

 

Have you go that installed?  I think I just overwrote the first file rather than adding it as a second MO2 file

 

BTW, you are using MO2, aren't you?

 

DQW

 

 

I thought this is the latest you can get? dse-display-model-vgamma1 

[Grim God]

55 minutes ago, DonQuiWho said:

 

I tried sending you my currently installed files, privately, in a PM, but that doesn't seem to work 🤔

 

There is a Hotfix for vbeta6 .....

 

dse-display-model-vbeta6-hotfix1

 

Have you go that installed?  I think I just overwrote the first file rather than adding it as a second MO2 file

 

BTW, you are using MO2, aren't you?

 

DQW

I am using DM3, dse-display-model-vbeta7 and yes I use MO2, for some reason it wont place the objects when I left click them,  just tells me I can't equip it, I also run a skyrim se - ae with almost 600 mods in it mostly graphic based, but who know might have an issue some where who knows

[Grim God]

1 hour ago, JunWeng said:

 

 

I thought this is the latest you can get? dse-display-model-vgamma1 

on the requirements part of this furniture pack it says [SSE] Display Model 3: Beta 7 or newer

[JunWeng]

4 hours ago, Grim God said:

on the requirements part of this furniture pack it says [SSE] Display Model 3: Beta 7 or newer

Here is the requirement for Display Model 3, maybe you can have a look if there is any missing require mods.

ConsoleUtilSSE NG use this instead of the listed, assume you didn't have it. 

And also check your MCM, there should be a MCM for Display Model, if your game might have trouble causing it unable to run the script. 

I was using vbeta7 before, and it worked too, the latest version fixed minor missing texture and bug. My game version is 1.6.640. For 1170 I'm not sure. Hope other users who are in 1170 can tell you their testimonial. 

Edited January 12, 2025 by JunWeng
Typo

[Grim God]

1 hour ago, JunWeng said:

Here is the requirement for Display Model 3, maybe you can have a look if there is any missing require mods.

ConsoleUtilSSE NG use this instead of the listed, assume you didn't have it. 

And also check your MCM, there should be a MCM for Display Model, if your game might have trouble causing it unable to run the script. 

I was using vbeta7 before, and it worked too, the latest version fixed minor missing texture and bug. My game version is 1.6.640. For 1170 I'm not sure. Hope other users who are in 1170 can tell you their testimonial. 

I have ConsoleUtilSSE NG  installed, I have all the requirements. I think there has to be a mod messing with it, or a load order issue, so I am going to go through my mods and make sure my load order is good, might be something with those.

[DonQuiWho]

3 hours ago, Grim God said:

I have ConsoleUtilSSE NG  installed, I have all the requirements. I think there has to be a mod messing with it, or a load order issue, so I am going to go through my mods and make sure my load order is good, might be something with those.

 

It all sounds like what you have should work.  Check nothing in MO2's L/H pane is overwriting the mod content.  And drag both esps right at the end of your Load Order's esp range in the R/H MO2 Pane and see what happens.  (I'm assuming that if you have any .esl files, they are located in your load order after all the esps)

 

DQW

[Mishka2030]

Hello, please tell me how to use this mod.
- I installed all 6 archives + required dependencies + recommendations.
I put the item in my inventory and click “use”, but it says “dmse” and there is no activator. I found dmse on the internet and installed it, but nothing changed in the game - there is still no activator. 

[ahmadirani12]

Hey i love your mod but i have some problem, when i open the game say DMSE Error

Or when i want use amy furniture game say device activator not found what os the problem? Can you help me?

[Cicerone]

Why don't I see the options window when I select an animation? The game pauses, but there's no window. Naturally, the character can't use the device because I didn't select anything, but simply closed the invisible window with the TAB key.