FNIS or Bodyslide Not Working?

[bm2x]

Playing the Skyrim (duh) and I want to give my people some more than just the regular half handfull that all the ladies seem to run around with nowadays.  The problem is, the regular body is all I have access to.  The sliders are present, but it doesn't matter what I do/change/etc I still have the regular standard vanilla body in game.  The sliders do not even show any actual change happening when I adjust them like normally.  IDK if I have something installed incorrectly, or an incorrect load order or well, I honestly just don't know.

 

All that seems to be Bodyslide problems, however, I suspect FNIS because I can do the do with any of the normal npcs that can be interacted with, and some other things (wolves, horses) but falmer, chaurus, skeevers, spiders, dragons, mudcrabs (I did a lot of testing...) will either a) give me t poses or b) make my characters and the target square up like fucking is going to happen and everyone strips (in falmer case, just me otherwise) but then target goes right back into combat with a now naked me.

 

Unsure if this is 1 single problem or has something to do with something else or if I am even correct in thinking it is Bodyslide or FNIS, but any help or direction would be greatly appreciated.

[Ankahet]

What body are you loading on bodyslide?

[bm2x]

I have never loaded anything other than the starter body and I just went from there and used the sliders to morph and change my characters into more or less whatever shapes I was going for.

 

Am I using the feature 'incorrectly' because up until my last couple of attempts I have not had the issue of not having changes take effect.

[Mez558]

For T Pose to happen then somewhere along the line animations have been installed and FNIS has not be run to register them.
I would guess, as it is MNC since or a creature animation pack since it seems to be monsters.

 

If you forget to run FNIS, play the game, save and then notice the T-Posing then run FNIS it won't fix it. You need to go back to a save before whatever animations were installed.

 

NPC's not moving when an SL animation should be playing means the animation has either not been registered (Reset SL animations in the Menu of SLAL, exit MCM wait for the confirmation messages, should be 2, open the SLAL menu again, exit MCM should get a final message back to SLAL menu and Register animations (all the ones you had selected will still be selected, they just need registering) or is just missing

 

As for Bodyslide, what body are you trying to build?

 

 

The Outfit/Body (not the Preset) and do you have any others to choose from?

[bm2x]

So, I run FNIS and start a new character, but again, same behavior, and it is linked to the possible participants, not the different animations because I've seen the dragur animations t pose the dragur but not any of the playable races when they try for the same animation; same for falmer.

 

Again, with a new character, I go through my load order and FNIS to try to make sure everything is clean before I start, so that's kind of why I am stumped.

 

I don't normally pre-make a body with the Bodyslide, because I USED to be able to just tweak and edit from the character creation, but the pic is (an extreme example; and I did save it) of what I am trying but failing to achieve

[bm2x]

and I saved it but my folder is empty for presets and it doesn't matter what I change because I just get this anyway

[Just Don't]

11 minutes ago, bm2x said:

So, I run FNIS and start a new character, but again, same behavior, and it is linked to the possible participants, not the different animations because I've seen the dragur animations t pose the dragur but not any of the playable races when they try for the same animation; same for falmer.

 

Again, with a new character, I go through my load order and FNIS to try to make sure everything is clean before I start, so that's kind of why I am stumped.

 

I don't normally pre-make a body with the Bodyslide, because I USED to be able to just tweak and edit from the character creation, but the pic is (an extreme example; and I did save it) of what I am trying but failing to achieve

Thats outfit studio, not Bodyslide. FNIS has nothing to do with body meshes.

 

Can you generate the body meshes using Bodyslide?

Which mod manager do you use?

[Mez558]

Make sure Build Morphs is checked

 

[Mez558]

I don't know of any other reason for the T-Pose other than an Animation that FNIS hasn't updated. Sorry. Only time I have had is because I've added or removed a mod with animations and forgot to run it.

The T-Pose won't affect everything just models that were for that specific animation. This is why I suspected MNC or another Creature animation mod. If it were something the PC used you'd T-Pose.

But if you run FNIS and then started a new game I have no idea. FNIS is running with admin rights? (Clutching at straws, a bit, here.)
 

[bm2x]

52 minutes ago, dontknowdontcaredontask said:

Thats outfit studio, not Bodyslide. FNIS has nothing to do with body meshes.

 

Can you generate the body meshes using Bodyslide?

Which mod manager do you use?

Okay, that is correct, Outfit Studio works, but Bodyslide does nothing when I change any/all of the sliders? 

 

So, no, I cannot generate meshes with Bodyslide

 

I'm using Nexus

19 minutes ago, Mez558 said:

I don't know of any other reason for the T-Pose other than an Animation that FNIS hasn't updated. Sorry. Only time I have had is because I've added or removed a mod with animations and forgot to run it.

The T-Pose won't affect everything just models that were for that specific animation. This is why I suspected MNC or another Creature animation mod. If it were something the PC used you'd T-Pose.

But if you run FNIS and then started a new game I have no idea. FNIS is running with admin rights? (Clutching at straws, a bit, here.)
 

I ALWAYS run FNIS with admin rights because once I just ran it regular and it didn't work, so lesson learned.  

 

I appreciate the clutch, because it is better than just me being dumb and possibly missing something obvious.

[Grey Cloud]

First of all you need to choose a body you like - CBBE or UUNP. This is personal preference.

Then reinstall BodySlide and choose the option for that body. There are video tutorials for all this.

You will probably also need a skin texture replacer for the body. Whichever one you go for, e.g. FSC, Mateure Skin etc., choose the 2k, optimised or performance version- not the 4K or 8K VRAM killer.

Next you will have to download armours that are for that body.

 

Once all that is done then you can choose a preset and build it to your body as in the screenshots by @Mez558 Again there are vids out there.

 

As for the sex act problems, what mod are you using if you are trying to have sex with hostile creatures? Defeat?

Mods which may be involved in sex with creatures - SIC, MNC, BDIC. Then you will need the actual animations and the animation packs will need to to enabled and registered in SLAL.

[bm2x]

Grey Cloud, I owe you like a great debt of gratitude.  All I needed to do was re-install Bodyslide and NOW everything is as I want it to be: working!

 

HAHAAHA!!! FISHYSTICKS FOR EVERYONE!!! ?

[Grey Cloud]

Glad that part is sorted. What about the FNISey part?

[Sampon]

Help me... please.

Where, what to replace it with... to normal looking? This is terrible...

 

 

Hol, mivel kell kicserélni... a normális kinézethez? Ez ugyanis borzalmas... 

[Just Don't]

49 minutes ago, Sampon said:

Where, what to replace it with... to normal looking? This is terrible...

 

That happens when you use skin textures made for other body types. If you're using CBBE, it comes with a set of skin textures and shouldn't look like that. If you're using UUNP you must download your own set of skin textures. Searching the nexus with words like "skin" or "cbbe", "uunp" should lead to the popular ones. Just make sure you are downloading the right one and not mixing up a CBBE body mesh with a UUNP skin texture (or the other way around).

[bm2x]

On 12/14/2019 at 5:58 AM, Grey Cloud said:

Glad that part is sorted. What about the FNISey part?

Nope, everything is working as it should be.  

 

...going out on a limb that the T pose was due to missing texture from poor cbbe, but idk.  It works and that is the important part.

[Mez558]

No the texture files have no effect on animation, they are just appearance. No idea what was causing your T-Poses but good to hear it's gone

[Sampon]

19 hours ago, dontknowdontcaredontask said:

That happens when...

Oh, I get it. Maybe...  The cbbe package "Caliente's Beautiful Bodies Edition v3.4f" is installed.  There's nothing else. That's the result. I took the Textures from somewhere else.... and at least you can watch...

 

 

but editing the body remained vomiting. Or-or ...pfh.

 

---using the 'Y' tracking Textures, you can at least watch. But it's not editable.  *that's why I asked.

 

Talán, értem. A Test csomag CBBE lett felrakva és más nem. Indulásnak kocsonyás volt a test. Az arc még ment. Majd Az arcok is elkezdtek eltűnni... lila. Kicseréltem a testbőrt egy követőire és a test normálisan megjelenik. Adott ruhák esetén. Az NPC arcok néha vizenyősek és a test mattos üveg és kocsonyaszerű. Szerkeszteni meg semmit nem lehet mert az szétesett... törött porcelánbaba és a mellek furcsán torzultak és feketék... siralmas. Egy másik telepítést is próbáltam... az sokkal rosszabb. Valami teljesen elromlott.

A képen ez nem látszik, mert a ruha kompatibilis magával és adja a testet. Sok ruha hasznavehetetlen. Sajnos...

[Grey Cloud]

You need these 12 texture files:

 

femalebody_1.dds

femalebody_1_msn.dds

femalebody_1_s.dds

femalebody_1_sk.dds

 

femalehands_1.dds

femalehands_1_msn.dds

femalehands_1_s.dds

femalehands_1_sk.dds

 

femalehead.dds

femalehead_msn.dds

femalehead_s.dds

femalehead_sk.dds

 

Easier if you just download a CBBE texture mod and install it via your mod mangager rather than trying to do it manually.