guide Skyrim SE for Beginners - V 3.2.6 (Outdated)

[hakto]

Do anyone have expirience with beeing female (instead of FM)?

 

I noticed that most of lesbian anim don't decrease arouse, is there a solution?

 

Found armor pack from Team TAL (several armors available in LL too) could post link to google drive here, if it not against rules

[Mittelat]

39 minutes ago, Jessica_Degurechaff said:

For me it was the same at the start because Nvidia control panel re-scaled the game at 4k (i have a 3080) i got around 30 FPS outside but constant fps loss whenever something happened (as in, magic, light sources, dragons, rain, etc)  after moving a lot of mods around and thinking it was Dyndolod/textures/ENB  it turns out it was simply the res on the Ini file, it was at 4k since the first time i opened the game Nvidia rescaled it to 4k, thats ok for skyrim vanilla or modded, not for a config as heavy as this guide.  As soon as i turned down to my native res (1920 x 1080) i got stable 60FPS no matter where or what was happening, a few spikes here and there but thats like 1 second spike in 2 hours play time.

In short i HIGLY suggest you turn down your Resolution to whatever native one you have....unless your screen its that resolution you said.

Have in mind that i have a Intel 8700K, RTX 3080, 32gb RAM, and the game and files Run on a NVME SSD (i can run everything on ultra, and most games on 4K)   It could be something very different for your system, however i still suggest you take a look to your GPU config.

You can also turn off the ENB.

 

Thanks for your insight. The thing is - my native resolution is 3440 x 1440. Of course it is more taxing on the system. But the laggs are just unbearable. Maybe i need to ditch ENB Lights to get a stable game.

[Jessica_Degurechaff]

1 hour ago, Mittelat said:

 

Thanks for your insight. The thing is - my native resolution is 3440 x 1440. Of course it is more taxing on the system. But the laggs are just unbearable. Maybe i need to ditch ENB Lights to get a stable game.

You can still turn down the res (you will end up with a black lane on the border of the screen) to force the game to take less resources:

I recomend testing that (resolution) before changing anything, if the game still lags even at a lower res, i would ditch the ENB lights , if it still lags, ditch ENB, if it still lags i dont know then, lol.

I had to force cyberpunk to run on a low res because for some reason it lags on my sistem until last update (yes, a pc the latest stuff..still lags with CP) it annoying at fist but as long as its not a massive downgrade you can deal with it

[Maligus]

7 hours ago, Tempfiks said:

If you have any LE mods, look for and remove all *.tga files - if not, no ideas atm.

Does the face re-appear with the hood removed?

@Tempfiks Only LE mods I would have, would be anything possibly in the suggested mod list. When the hood comes off it still looks like that so trying to figure out what is happening. 

Using the Seranaholic 1.8 and the wrongbody mod, as well as the wrongbody files @Aylis posted, everything else is from the mod list here that would affect vampires etc.

 

using MO is there a quick way for me to hunt down these .tga files or will I need to go fish through the main game folder? 

 

Interior shot without hood for reference as well:  

Spoiler

 

 

**Resolved!** Turns out the WBody - Serana (HPH) V1.0 was overwritting the face and turning it invisible, disabling that sorted it out.

[Mittelat]

On 5/22/2021 at 5:19 PM, maltodaxtrin said:

I have the same problem. Gonna try disabling one mod at a time and see what's up

 

edit: seems like it's a female-only bug with CBBE BodySlide interaction. https://www.nexusmods.com/skyrimspecialedition/mods/47184?tab=posts&BH=6

 

And only with some armor sets, Fur being one of them. Seems like BodySlide takes the vanilla .nif mesh files when batch building and not the ones installed with Simply Realistic Armor no matter what you do, even if you manually copy them in the right folder. I will investigate further.

 

Edit2: I have tried having no BodySlide files active (all unchecked), I have also unchecked BodySlide, CBBE and all its related mods, and I also have Simply Realistic Armors dead last in my load order, and yet it doesn't work. Really puzzled here.

 

Edit3 (lmao): @Mittelat Okay it works here's what you have to do. First of all, running BodySlide overwrites Simply Realistic Armors because that's how BodySlide works: it takes vanilla armor meshes from skyrim.esm or something, not Simply Realistic Armor meshes when creating the patch. So depending on your CBBE install options and BodySlide requirements, 2 different things need to happen :

1. If you are using default CBBE body options (Curvy, Slim, etc) for all your outfits, then simply NEVER apply further BodySlide patches to Vanilla outfits. Let the CBBE mod do this by default and don't touch anything. Patch custom outfits as normal, uncheck vanilla outfits. You don't want physics on such gorgeous practical armors anyway.

2. If you are using a custom CBBE body preset (like Kurone Preset for example), then you will need to first patch the Vanilla outfits with BodySlide into Overwrite, make a mod out of it and move it above Simply Realistic Armor, but below CBBE, and activate that. Then patch all other outfits as normal.

 

Now even if you do this it might not work, because of a retarded bug I can't explain. You can turn off everything, put Simply Realistic Armors dead last in your load order, and it won't work because computers are inherently retarded it would seem. So after doing the steps above just REINSTALL Simply Realistic Armors (Replace when prompted, same place in the load order), yep that's right, do this totally useless thing that shouldn't have any impact in MO2 but somehow... does. And poof, it should work. It did for me and I had the exact same problem you had.

 

BTW everybody should do this.

 

You can test the bug for yourself by equipping a fur armor and comparing how it looks on you vs how it looks in the preview on the right side of the inventory or in 1st person. If you batch-built any custom preset over vanilla armors, it won't be the right meshes, it will be the vanilla ones. It's highlighted in a sticky post on the modpage by the mod author, it's a compatibility bug for everyone who are batch-building vanilla outfits using CBBE BodySlide over Simply Realistic Armors (so basically almost everyone who reads this thread). At first I noticed but thought the problem was a mistake I did along the way -- it's not, it's an automatic bug with current versions of those mods.

 

It worked! Thank you so much

[arshesney]

52 minutes ago, Maligus said:

using MO is there a quick way for me to hunt down these .tga files or will I need to go fish through the main game folder? 

Yep, Data tab in right MO panel: filter by .tga. You can also use Windows' search in you mods folder.

[lanaya1437]

After following this guide, something happened that I haven't seen before. When wearing a gag, the PCs mouth is open most of the time, but sometimes starts to violently "twitch", rapidly opening and closing. Is this a problem with some of the dynamic facial animations?

[maltodaxtrin]

1 hour ago, Mittelat said:

 

It worked! Thank you so much

 

So glad it worked! Did you have to do the extra step at the end, which is to reinstall Simply Realistic Armor, or did it work just by not building the vanilla bodyslides?

 

[jaeos]

15 hours ago, Maligus said:

Has anyone encountered this bug before and what might be the culprit?

  Hide contents

 

 

When she is inside and has the damn hood off, does she look normal or is she still a set of floating HUMAN teeth?

This is what my LO looks like when it comes to serana. 

Spoiler

Might try moving things around ands see where that takes you.

[Mittelat]

8 hours ago, maltodaxtrin said:

 

So glad it worked! Did you have to do the extra step at the end, which is to reinstall Simply Realistic Armor, or did it work just by not building the vanilla bodyslides?

 

 

To be honest. I was a bit lazy and reinstalled the mod first. But that didn't help. Then i redid my bodyslides. This time i didn't create specific ones for the vanilla armors. So i still have only one bodyslide output. It's more immersive this way. 

 

Not 100 % your solution but it worked.

 

Even though i'm happy that it works now. I still would like to have bodyslides for all the clothes, dresses etc, light armor. Everything that isn't heavy metal. Is there some way to build the bodyslide/physics only for them?

[Mittelat]

15 hours ago, Jessica_Degurechaff said:

For me it was the same at the start because Nvidia control panel re-scaled the game at 4k (i have a 3080) i got around 30 FPS outside but constant fps loss whenever something happened (as in, magic, light sources, dragons, rain, etc)  after moving a lot of mods around and thinking it was Dyndolod/textures/ENB  it turns out it was simply the res on the Ini file, it was at 4k since the first time i opened the game Nvidia rescaled it to 4k, thats ok for skyrim vanilla or modded, not for a config as heavy as this guide.  As soon as i turned down to my native res (1920 x 1080) i got stable 60FPS no matter where or what was happening, a few spikes here and there but thats like 1 second spike in 2 hours play time.

In short i HIGLY suggest you turn down your Resolution to whatever native one you have....unless your screen its that resolution you said.

Have in mind that i have a Intel 8700K, RTX 3080, 32gb RAM, and the game and files Run on a NVME SSD (i can run everything on ultra, and most games on 4K)   It could be something very different for your system, however i still suggest you take a look to your GPU config.

You can also turn off the ENB.

 

Where did you get the RTX 3080...*envy*

[Jessica_Degurechaff]

@Aylis Windows Shadows  just updated and the FOMOD its different for your recomended settings on post #3

[Aylis]

2 hours ago, Jessica_Degurechaff said:

Windows Shadows  just updated and the FOMOD its different for your recomended settings on post #3

Thanks. I hate it when they do that. Fixed

[maltodaxtrin]

8 hours ago, Mittelat said:

 

To be honest. I was a bit lazy and reinstalled the mod first. But that didn't help. Then i redid my bodyslides. This time i didn't create specific ones for the vanilla armors. So i still have only one bodyslide output. It's more immersive this way. 

 

Not 100 % your solution but it worked.

 

Even though i'm happy that it works now. I still would like to have bodyslides for all the clothes, dresses etc, light armor. Everything that isn't heavy metal. Is there some way to build the bodyslide/physics only for them?

 

Well yes, you can check only the vanilla outfits when making your bodyslide and make a separate mod out of it, move it below CBBE but above SRA, like I detailed in my explanation.

 

Now, will it work exactly as intended without any bugs? I have no idea, because the Simply Realistic Armors (SRA) mod overwrites the meshes after the BodySlide pass. But it's the only way to actually have them work. If you load the bodyslide meshes later in your load order, overwriting SRA (even if MO2 doesn't tell you it overwrites SRA, somehow it does), you will be stuck with vanilla outfits.

[Mittelat]

1 hour ago, maltodaxtrin said:

 

Well yes, you can check only the vanilla outfits when making your bodyslide and make a separate mod out of it, move it below CBBE but above SRA, like I detailed in my explanation.

 

Now, will it work exactly as intended without any bugs? I have no idea, because the Simply Realistic Armors (SRA) mod overwrites the meshes after the BodySlide pass. But it's the only way to actually have them work. If you load the bodyslide meshes later in your load order, overwriting SRA (even if MO2 doesn't tell you it overwrites SRA, somehow it does), you will be stuck with vanilla outfits.

 

"move it below CBBE but above SRA,"

 

But how did you manage to do that, without changing the load order of SAR? Because CBBE is lower category: FINAL than SRA category - Armor.

 

[maltodaxtrin]

2 hours ago, Mittelat said:

 

"move it below CBBE but above SRA,"

 

But how did you manage to do that, without changing the load order of SAR? Because CBBE is lower category: FINAL than SRA category - Armor.

 

 

Not 3BBB, CBBE the body replacer, under "PC"

[lanaya1437]

On 5/25/2021 at 11:23 PM, lanaya1437 said:

After following this guide, something happened that I haven't seen before. When wearing a gag, the PCs mouth is open most of the time, but sometimes starts to violently "twitch", rapidly opening and closing. Is this a problem with some of the dynamic facial animations?

Follow up if anyone has info, since it seems the mouth twitching is there even without a gag.

[Tiemphyx]

I'd like to make a pitch for Better Presets and Customization 1.0.0 .  The requirements match this build and, for me, it's cleared up a number of character creation issues.  It works well with HP heads.  Here's an example that took less than 30m:

Spoiler

It loads after Alternate Start.

 

Also, a preset that I don't personally use but might work here and some might appreciate is Evelyn - a High Poly Racemenu preset SE

[Tiemphyx]

 

3 hours ago, lanaya1437 said:

Is this a problem with some of the dynamic facial animations?

Yes, and I wish I had an answer for you.  It seems to come and go with various versions and LO's for me too, although I'm currently not seeing it.

Check the important Post #3 facial animation notes. My current modlist is up to date on the versions shown here:

 

A couple near the bottom are clearly not part of this guide.

 

Spoiler

 

 

 

[Jessica_Degurechaff]

@Aylis a friend of mine its installing the guide: He ask if its normal that JK's Interiors Patch Collection  does not auto detect (Group 2) DX Dark Knight Armor (i dont use that armor, so thats why im asking, if not i would answer myself) (yes, he ofc uses the armor) 

 

Spoiler

 

He also ask if  any of these 2 files from Rudy ENB fixes can be used

 

[lanaya1437]

17 hours ago, Tempfiks said:

 

Yes, and I wish I had an answer for you.  It seems to come and go with various versions and LO's for me too, although I'm currently not seeing it.

Check the important Post #3 facial animation notes. My current modlist is up to date on the versions shown here:

 

A couple near the bottom are clearly not part of this guide.

 

  Reveal hidden contents

 

Following this MO actually seemed to fix the problem, so thanks, though I'm not sure what conflicted with what.

 

 

[srteare]

After a few days trying load everything in, except for the enb. all the male npcs are naked if someone could help would much appreciated

[Tiemphyx]

1 hour ago, srteare said:

After a few days trying load everything in, except for the enb. all the male npcs are naked if someone could help would much appreciated

First, if this has occurred from your first run, rule out load order issues:

1) Make sure every mod in your left pane is in the same order as the instructions.

2) Establish your load order by either:

R-clking and Unchecking All of those mods and then, starting at the top, enabling them one by one.

- or

Leave them enabled and use  Sync Load Order Plugin for Mod Organizer 2   [Sync Plugins with Mod Order]

Either way, you'll need to check for delinquent masters: make sure patches appear after the last plugin they patch and mods with multi .esps are in the right order.

 

If it persists and affects only a few npc's, look for odd conflicts and missing meshes.  Bottom line - you've made a mistake or missed something, because the directions work.

 

 

 

Edited May 27, 2021 by Tempfiks

[srteare]

Ok thanks for the quick response I will try what suggested

[Aylis]

@Jessica_Degurechaff

1. The armor can't be detected as we use a different version.

2. I got no vanilla clouds in the game.