GreatLord Posted July 17, 2018 Share Posted July 17, 2018 5 hours ago, phil01991 said: Does anyone know if simple slavery plus works? Was working on a mod that requires it. I've installed it and on its MCM menu there are no settings at all, it just has a long list of other mods which shows if are present/active or not. In this list I had only PAHE but nothing else, so I have played for a while without any issues but on the other hand simple slavery doesn't do anything by itself and I have uninstalled it. Or perhaps I'm missing something (?) Link to comment
Tron91 Posted July 17, 2018 Share Posted July 17, 2018 S_L_U_T_S Redux working but no devices are getting equipped. Link to comment
Tron91 Posted July 17, 2018 Share Posted July 17, 2018 1 hour ago, GreatLord said: I've installed it and on its MCM menu there are no settings at all, it just has a long list of other mods which shows if are present/active or not. In this list I had only PAHE but nothing else, so I have played for a while without any issues but on the other hand simple slavery doesn't do anything by itself and I have uninstalled it. Or perhaps I'm missing something (?) I tried with v6.01 as well. No luck, can't even load the Riften Slave Market or even the Holding cell. It detects my slavery related mods properly in MCM, but nothing else on MCM. Link to comment
adeptphineus Posted July 17, 2018 Share Posted July 17, 2018 10 hours ago, tasairis said: Is that NMM? Doesn't sound familiar for MO2. If there are problems unpacking then it could be the file. Try just a plain Windows .zip. Yeah NMM was what was giving me that error. MO2 gave no error in-app but launching the game didnt ever poll the esm Ill try repackaging without re-BSA-ing. See if that works. If not...I might try just going into CK with PSQ loaded and essentially re-copying all the changes by hand to a new mod. Anyone know if the original owner is still modding? Link to comment
Guest Posted July 17, 2018 Share Posted July 17, 2018 Is it safe to use Blush when Aroused with SE? Link to comment
phil01991 Posted July 17, 2018 Share Posted July 17, 2018 5 hours ago, Tron91 said: I tried with v6.01 as well. No luck, can't even load the Riften Slave Market or even the Holding cell. It detects my slavery related mods properly in MCM, but nothing else on MCM. Basically where I'm at Link to comment
MountainManCO Posted July 18, 2018 Share Posted July 18, 2018 11 hours ago, Tron91 said: S_L_U_T_S Redux working but no devices are getting equipped. There are both loose files and BSA files which conflict. You need both, but the loose files need to win after expanding the BSA files. I had the same issue until I discovered that. Link to comment
tasairis Posted July 18, 2018 Author Share Posted July 18, 2018 17 hours ago, Cloudymodder said: Speaking of HDT, how do I install HDT physics SE, because shoving the framework and physics archives into my NMM isn't working. I'm not getting any visible physics- clothes on, or clothes off. Is there something else I have to do first before activating the archives in my NMM? Edit: Oh wait, you are talking about HDT-SMP. Sounded like you wanted HDT-PE. Have you checked the thread? Are you using HDT-SMP mods? Because HDT-PE stuff won't work. 14 hours ago, Irek1994 said: I have a question Abigail The Lusty Imperial Maid v2 when the premiere on The Elder Scrolls V: Skyrim ? I don't know. You can try converting her yourself. 13 hours ago, GreatLord said: For me expressions are working but mfg console has not been ported to SSE yet. SL 1.63 is using the expression functions that SKSE provides, which is why it works as much as it does (still buggy). That said, ✗ MfgConsole (extra information window in the console) - but opparco's port includes the expressions table✓ MfgConsole (mfg commands) - andrelo1's and opparco's ports support the console commands? MfgConsole (MfgConsoleFunc) - andrelo1's port appears to be feature-complete with Oldrim's Note for MfgConsole:So to summarize:* andrelo1's port ✗ doesn't have the extra information, ✗ doesn't have the expression table, ✓ supports the mfg command, ✓ provides a working MfgConsoleFunc.pex* opparco's port ✗ doesn't have the extra information, ✓ does have the expression table, ✓ supports the mfg command, ✗ does not provide MfgConsoleFunc.pexMfgConsoleFunc is/was the main way to change expressions in Papyrus and may still be needed by some mods even though SKSE also provides much (but not all) of the functionality. Fortunately it should be safe to run both versions at the same time. 7 hours ago, Norli said: Is it safe to use Blush when Aroused with SE? Overlays don't work yet so there's no point installing it. Link to comment
phil01991 Posted July 18, 2018 Share Posted July 18, 2018 4 hours ago, MountainManCO said: There are both loose files and BSA files which conflict. You need both, but the loose files need to win after expanding the BSA files. I had the same issue until I discovered that. Didn't even know it was portable. Thought slavetats was a hard dependency. Link to comment
zarantha Posted July 18, 2018 Share Posted July 18, 2018 21 hours ago, Cloudymodder said: Speaking of HDT, how do I install HDT physics SE, because shoving the framework and physics archives into my NMM isn't working. I'm not getting any visible physics- clothes on, or clothes off. Is there something else I have to do first before activating the archives in my NMM? Good luck with the HDT SMP. Looks like Tasairis got you a link for it, here's more reading. You need bodies and armor that support it, and it needs some configuring out of the box. https://forums.nexusmods.com/index.php?/topic/3800385-a-guide-to-hdt-smp-usersmodders/ 22 hours ago, phil01991 said: Does anyone know if simple slavery plus works? Was working on a mod that requires it. Just changed from SS to SS+. I need to try triggering some scenes, but it's installed and the MCM is working. Probably test over the weekend, unless I get off work early. Link to comment
phil01991 Posted July 18, 2018 Share Posted July 18, 2018 4 hours ago, zarantha said: Good luck with the HDT SMP. Looks like Tasairis got you a link for it, here's more reading. You need bodies and armor that support it, and it needs some configuring out of the box. https://forums.nexusmods.com/index.php?/topic/3800385-a-guide-to-hdt-smp-usersmodders/ Just changed from SS to SS+. I need to try triggering some scenes, but it's installed and the MCM is working. Probably test over the weekend, unless I get off work early. Let me know how it goes. I got the mcm menu working but ctd when triggered. Link to comment
GreatLord Posted July 18, 2018 Share Posted July 18, 2018 10 hours ago, tasairis said: ✗ MfgConsole (extra information window in the console) - but opparco's port includes the expressions table✓ MfgConsole (mfg commands) - andrelo1's and opparco's ports support the console commands? MfgConsole (MfgConsoleFunc) - andrelo1's port appears to be feature-complete with Oldrim's Note for MfgConsole:So to summarize:* andrelo1's port ✗ doesn't have the extra information, ✗ doesn't have the expression table, ✓ supports the mfg command, ✓ provides a working MfgConsoleFunc.pex* opparco's port ✗ doesn't have the extra information, ✓ does have the expression table, ✓ supports the mfg command, ✗ does not provide MfgConsoleFunc.pexMfgConsoleFunc is/was the main way to change expressions in Papyrus and may still be needed by some mods even though SKSE also provides much (but not all) of the functionality. Fortunately it should be safe to run both versions at the same time. What I want the most is not there, extra information. Sometimes is useful for getting IDs, while can be funny with the mood information. Thanks for the response. Link to comment
MountainManCO Posted July 18, 2018 Share Posted July 18, 2018 9 hours ago, phil01991 said: Didn't even know it was portable. Thought slavetats was a hard dependency. You can "port" slavetats, it just doesn't work, but the calls are there. No harm no foul. Link to comment
thisisshameful Posted July 18, 2018 Share Posted July 18, 2018 I see there is a Bodies section, let's add Sevenbase https://www.nexusmods.com/skyrimspecialedition/mods/10151 Link to comment
goldust Posted July 18, 2018 Share Posted July 18, 2018 still waiting for my guy expired to fix race menu for SE..he is working on it so any news on that front ? Link to comment
jdods13 Posted July 18, 2018 Share Posted July 18, 2018 Anyone know is Sexlab approach has been updated to SE? Link to comment
Guest Posted July 18, 2018 Share Posted July 18, 2018 5 minutes ago, jdods13 said: Anyone know is Sexlab approach has been updated to SE? No but there is a stable, improved and easily portable Japanese version with a great translation. https://github.com/nbits-ssl/SexLabApproachJPPlus/releases Link to comment
Nimkal Posted July 19, 2018 Share Posted July 19, 2018 Would someone be interested to integrate Osex with Amorous Adventures? I am not a modder but here's a question for you guys: Since Flower Girls has already taken Amorous Adventures and placed markers within the mod to trigger sex scenes at the correct times, would it not be possible to replace those markers with a simple integration of "start Osex with target", instead of the flowergirl animation being played? How long do you think that would take, if you are a modder. Of course FF author would have to be credited or maybe even asked permission(not sure about the rules). But I've come to appreciate this idea. ? For the kissing scenes I believe it's pretty good to leave it with FlowerGirl scenes, but when it comes down to sex scenes, Osex integration would make Amorous Adventures much more immersive. Again I'm no modder so I'm probably clueless about the details, but that's why I'm asking you peeps Link to comment
Dadicho Posted July 19, 2018 Share Posted July 19, 2018 It already is I believe, https://www.nexusmods.com/skyrim/mods/70495/?tab=description Spoiler -The OSA / OSex version of the Amorous Adventures Mod. OSex can be found here. Uses the OSex adult intimacy system - has intimate animations. Requires OSA and OSex 1.08+ (and all it's requirements). You will need FNIS, SkyUI, a body, a skeleton, SKSE, etc... See OSA / OSex page. If that's what you mean. Under '' Different Versions'' Link to comment
Nimkal Posted July 19, 2018 Share Posted July 19, 2018 That is not for Special Edition though. The author of Amorous Adventures only mentions functionality of Flowergirls (in the SE version). Link to comment
jdods13 Posted July 19, 2018 Share Posted July 19, 2018 2 hours ago, SKYRIMSEXISCOOL said: No but there is a stable, improved and easily portable Japanese version with a great translation. https://github.com/nbits-ssl/SexLabApproachJPPlus/releases Cool thanks. Got this one and it works great. Link to comment
Tooneyman23 Posted July 19, 2018 Share Posted July 19, 2018 2 hours ago, Nimkal said: That is not for Special Edition though. The author of Amorous Adventures only mentions functionality of Flowergirls (in the SE version). You have to convert it yourself and that's not hard at all. Link to comment
Cloudymodder Posted July 19, 2018 Share Posted July 19, 2018 On 7/17/2018 at 10:34 PM, tasairis said: Edit: Oh wait, you are talking about HDT-SMP. Sounded like you wanted HDT-PE. Have you checked the thread? Are you using HDT-SMP mods? Because HDT-PE stuff won't work. I don't know. You can try converting her yourself. SL 1.63 is using the expression functions that SKSE provides, which is why it works as much as it does (still buggy). That said, ✗ MfgConsole (extra information window in the console) - but opparco's port includes the expressions table✓ MfgConsole (mfg commands) - andrelo1's and opparco's ports support the console commands? MfgConsole (MfgConsoleFunc) - andrelo1's port appears to be feature-complete with Oldrim's Note for MfgConsole:So to summarize:* andrelo1's port ✗ doesn't have the extra information, ✗ doesn't have the expression table, ✓ supports the mfg command, ✓ provides a working MfgConsoleFunc.pex* opparco's port ✗ doesn't have the extra information, ✓ does have the expression table, ✓ supports the mfg command, ✗ does not provide MfgConsoleFunc.pexMfgConsoleFunc is/was the main way to change expressions in Papyrus and may still be needed by some mods even though SKSE also provides much (but not all) of the functionality. Fortunately it should be safe to run both versions at the same time. Overlays don't work yet so there's no point installing it. Thanks for the link and stuff, but I can't even begin to understand where to get the mod, how to configure it, and how to activate it. Is there any issues associated with using cbp physics because they seem to be running pretty smoothly even with hdt physics se installed. Link to comment
Nimkal Posted July 19, 2018 Share Posted July 19, 2018 2 hours ago, Tooneyman23 said: You have to convert it yourself and that's not hard at all. Not hard at all eh? Lol that helps Link to comment
Guest Posted July 20, 2018 Share Posted July 20, 2018 17 hours ago, Nimkal said: Not hard at all eh? Lol that helps It's really not, it just depends on the type of files in the mod. Once you're used to it it's a 5 minute process. In this case Amorous Adventures probably only needs to be opened and saved in the Creation Kit (the textures/meshes might also need fixing but generally you don't need to do that unless you find problems). Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now