zaira Posted May 8, 2015 Author Posted May 8, 2015 So I'm strolling along with my master, (playing 1.19) all of a sudden.. ctd. No problem, reload a save and I get a whipping for not asking for permission to leave her alone. That's ok, not the first time she whipped me, but then my master freezes. Tried everything to unfreeze her but no go. Reload another save, and I thought- oh oh. Sure enough she's really pissed off, takes me up to the top of the College of Winterhold and shoots me full of arrows. End of game. At this rate I'm only allowed one ctd. lol I hope this neat little feature of asking for permission to quit is not in 1.20 Aside from that it's the best mod out there. It's disgusting, perverted, disturbing and erotic as hell. I love it. The amount of unallowed checkouts is stored in SKSE\Plugins\StorageUtilData\mariastats.json if you set this value to -42 the checkout counting is disabled For some reason the only two files I see are mariadefaults.json and maria.json , was looking for that same variable . Anyway , Auron the slaver seems to be bugged (sometimes ends up in the cage, for no reason and/or freezes) and for some reason when I ask for a whipping the master talks with herself about permision to whip the slave which is ....awkward . { "int" : { "unallowedcheckoutcounter" : -42 } }
eric_starbuck Posted May 8, 2015 Posted May 8, 2015 Thank you Zaira, 1.20 works fine for me. Sometimes the cage doors are a bit buggy. but I couldn't figure out why. Surrender to hostiles, transport of goods etc worked fine. I wanted to check if they would have sold me to one of the new brothels, but they took me to Aaron who was at the bannered mare. i got the "Transport of goods completed" and "a slaver's bitch" started, but he kept saying "I am not talking to slaves" such as all others NPC in the bannered mare, not matter if kneeling or not. It also happened that I have to "release player control" from ZAZ as I couldn't move. The slave quests have been overhauled or just the whoring quests? in paying for food quest in the inn room, if I chose the "kitty job" it is still buggy. in the whoring job it works the "extra for kitty dress" while in the room service the harness is in the inventory but not equippable and the quest does not proceed.
Guest Zentari2238 Posted May 8, 2015 Posted May 8, 2015 { "int" : { "unallowedcheckoutcounter" : -42 } } Nvm , my stupidity is monumental . Turns out it was located in Data\skse\Plugins\StorageUtilData\ instead of SKSE\Plugins\StorageUtilData\ Thanks and sorry for wasting your time .
rypley Posted May 8, 2015 Posted May 8, 2015 Hello, I very often a blocking issue with the Npc or master during a scene. The Npc does not move, if I want to talk to him I get the message "this person is busy" but nothing happen. (I made the requested action yet (kneeling, nakeg etc...) may not he record this action ?) Sometimes the master no longer offers master's dialogue. I am still a slave but it seems to be my master abd he remains in one place wothout moving. Is there a way to unlock a npc ? I saw you put the last log. I do not understand much; but I see the log that there are many errors. Merci Papyrus.0.log
Funkcikle Posted May 8, 2015 Posted May 8, 2015 So, these new radial menus with the pose options on them, How on earth do I go about getting them to come up ? I'm using the newest version of ME, and i belive that there are now just 2 hotkeys ? and when pressed those hotkeys should bring up the radial menus with the options ? is that correct ? Because thats not hapening for me. I have UI extensions installed, and i tested that its working, and it is working with radial containers. I get a radial menu when I press the hotkey. Reassigning the 2 hotkeys from the general tab in the MCM menu does nothing. The options 1-9 were working for me on the previous version. I'm a bit stumped, so if anyone has any good ideas, I would be most grateful. I'm sure its something retarded on my end. I did notice someone else in an earlier post had a similar problem, but they resolved it, but did not say how they did it. Which is always a bummer.
zaira Posted May 8, 2015 Author Posted May 8, 2015 Look into SKSE\Plugins\StorageUtilData\mariadefaults.json: { "int" : { "abductionchance" : 10, "actionkey" : 269, "actiontime" : 10, "automaticquests" : 0, "clotheskey" : 266, "dailyjobinterval" : 1, "deathchance" : 10, "hometimer" : 4, "initchargen" : 0, "initsexlab" : 1, "initzaz" : 1, "kneelkey" : 267, "posekey" : 268, "realblindfolds" : 0, "septimsperday" : 900, "succubusdamagerate" : 1000, "succubusdrainrate" : 5, "succubusvictimcounter" : 5 }, "string" : { "playername" : "Eva" } } This is how my setup look like. The (decimal) key-values are explained here: http://www.creationkit.com/Input_Script#DXScanCodes Hello, I very often a blocking issue with the Npc or master during a scene. The Npc does not move, if I want to talk to him I get the message "this person is busy" but nothing happen. (I made the requested action yet (kneeling, nakeg etc...) may not he record this action ?) Sometimes the master no longer offers master's dialogue. I am still a slave but it seems to be my master abd he remains in one place wothout moving. Is there a way to unlock a npc ? I saw you put the last log. I do not understand much; but I see the log that there are many errors. Merci Start a new game - your save-game is completely broken
sonofreno Posted May 8, 2015 Posted May 8, 2015 So, these new radial menus with the pose options on them, How on earth do I go about getting them to come up ? I'm using the newest version of ME, and i belive that there are now just 2 hotkeys ? and when pressed those hotkeys should bring up the radial menus with the options ? is that correct ? Because thats not hapening for me. I have UI extensions installed, and i tested that its working, and it is working with radial containers. I get a radial menu when I press the hotkey. Reassigning the 2 hotkeys from the general tab in the MCM menu does nothing. The options 1-9 were working for me on the previous version. I'm a bit stumped, so if anyone has any good ideas, I would be most grateful. I'm sure its something retarded on my end. I did notice someone else in an earlier post had a similar problem, but they resolved it, but did not say how they did it. Which is always a bummer. Try to rebind the keys, works for me
eric_starbuck Posted May 8, 2015 Posted May 8, 2015 Try to rebind the keys, works for me same here. if I press the arrow keys nothing happens unless I go to the menu and rebind them. (even on the same keys!). Now I remember another bug. During the freak show event in training, one of the guests kept coming inside the cage asking if I was a whore breaking the scene.
zaira Posted May 8, 2015 Author Posted May 8, 2015 Try to rebind the keys, works for me same here. if I press the arrow keys nothing happens unless I go to the menu and rebind them. (even on the same keys!). Now I remember another bug. During the freak show event in training, one of the guests kept coming inside the cage asking if I was a whore breaking the scene. You still wearing the whore piercing - it adds the magic effect WhorePower... How is this possible - the Slavetrader has removed anything from you.
olonolo Posted May 8, 2015 Posted May 8, 2015 So I'm strolling along with my master, (playing 1.19) all of a sudden.. ctd. No problem, reload a save and I get a whipping for not asking for permission to leave her alone. That's ok, not the first time she whipped me, but then my master freezes. Tried everything to unfreeze her but no go. Reload another save, and I thought- oh oh. Sure enough she's really pissed off, takes me up to the top of the College of Winterhold and shoots me full of arrows. End of game. At this rate I'm only allowed one ctd. lol I hope this neat little feature of asking for permission to quit is not in 1.20 Aside from that it's the best mod out there. It's disgusting, perverted, disturbing and erotic as hell. I love it. The amount of unallowed checkouts is stored in SKSE\Plugins\StorageUtilData\mariastats.json if you set this value to -42 the checkout counting is disabled For some reason the only two files I see are mariadefaults.json and maria.json , was looking for that same variable . Anyway , Auron the slaver seems to be bugged (sometimes ends up in the cage, for no reason and/or freezes) and for some reason when I ask for a whipping the master talks with herself about permision to whip the slave which is ....awkward . { "int" : { "unallowedcheckoutcounter" : -42 } } Thank you Zaira, now I can ctd all I want. But really, I don't get too many crashes. My game went from being unplayable to virtually trouble free after installing Papyrus 3 BETA 4. And I'm even using a follower mod. I also have Spouses Enhanced running just for a nice contrast away from the madness. Now I can take my beautiful wife Lydia on a vacation to Lake Ilinalta and spend a few quiet, romantic days there. Of course I can always get her to whip me there as well.
zaira Posted May 8, 2015 Author Posted May 8, 2015 Default keys are GameControler digitial cross Left/Right - not arrow keys.
zaira Posted May 8, 2015 Author Posted May 8, 2015 I detected several CTDs during game load and found in the log file many attempts of creature framework to access SL Aroused. After I installed SL Aroused the crashes has gone.
anomalic Posted May 8, 2015 Posted May 8, 2015 stupid question maybe but.... i started as slave in the dungeon and went to freak show. i followed the master , he said "get in there" (the cage) - but my hands are bound and i cannot open the door.... ? besides: i'd love to get more constraint action. as a slave, i still have too much choice. especially at the beginning. maybe you could change this in sth more.... obedient anyways... i love this mod so much!!!!
zaira Posted May 8, 2015 Author Posted May 8, 2015 stupid question maybe but.... i started as slave in the dungeon and went to freak show. i followed the master , he said "get in there" (the cage) - but my hands are bound and i cannot open the door.... ? besides: i'd love to get more constraint action. as a slave, i still have too much choice. especially at the beginning. maybe you could change this in sth more.... obedient anyways... i love this mod so much!!!! Disable Debug mode in MCM and than you have no more choices
amandul Posted May 8, 2015 Posted May 8, 2015 I dont know if its an bug or if i miss something. When I use Zaz Chains, I get an CTD (Everytime I get enslaved, or tried to use the gallows, and so on, in the moment it get equipped, Bamm CTD.). Without it the mod works fine. I have tried the chains without Maria mod and it works.
Lyman the Lunatic Posted May 8, 2015 Posted May 8, 2015 Hello, only tried the Ponytail. I found a couple of problems. 1) NPCs can't navigate themselves to the x cross down stairs so they end up standing in a corner right next to the stage. 2) My char. stood perfectly still in the scene, unable to move. So I have to wait for the game to poof my char to where her master is. 3) For whore job, the client will approach twice. 4) Enno wants to stare at the ceiling for some reason. Edit, just tried the Fox club. It's really beautiful, I love it. Here's the problem I noticed. So I make my char. take a training from Esmir, after 2 sessions. He chose to turn his attention to the Aela clone. The problem with the Aela clone is that she's not moving at all. So Esmir ended up staring at her & nothing happened. Also, 1 of the cage doors in the event room will lock itself if my char. walk into the cell. Effectively lock my char. in. So... any idea as to why it did that?
chipstick Posted May 8, 2015 Posted May 8, 2015 So, these new radial menus with the pose options on them, How on earth do I go about getting them to come up ? I'm using the newest version of ME, and i belive that there are now just 2 hotkeys ? and when pressed those hotkeys should bring up the radial menus with the options ? is that correct ? Because thats not hapening for me. I have UI extensions installed, and i tested that its working, and it is working with radial containers. I get a radial menu when I press the hotkey. Reassigning the 2 hotkeys from the general tab in the MCM menu does nothing. The options 1-9 were working for me on the previous version. I'm a bit stumped, so if anyone has any good ideas, I would be most grateful. I'm sure its something retarded on my end. I did notice someone else in an earlier post had a similar problem, but they resolved it, but did not say how they did it. Which is always a bummer. I've got the same issue. I don't know if rebinding the keys worked for you, but they didn't for me. I can't get the pose/action menu to come up no matter what. I tried starting a new game, still no dice. Just to clarify: FNIS has been run. All required mods are installed. No known conflicting mods are installed. All Maria 1.2 files installed, except for the alternate language esps, the vanilla outfit json file, and all the quickstart and LAL files.
Funkcikle Posted May 8, 2015 Posted May 8, 2015 Oh, Ive Re-bound the keys, a number of times. Action makes me strip, and pose makes me Knee, but no menu to select anything comes up. So for instance when My pc is told to lie down, I can only kneel, and that circular menu for selecting actions I see in the screenshot does not appear. So I don't have access to all the other actions. Tis irksome Why would that happen ? What could I be missing from my build that enables these UI additions to work. JUst to be clear, my difficulty is that the menus are not appearing. Could someone perhaps just go over exactly what I need to have installed for me, in order to get the new UI menus for this mod to appear, ta very much.
chipstick Posted May 8, 2015 Posted May 8, 2015 Oh, Ive Re-bound the keys, a number of times. Action makes me strip, and pose makes me Knee, but no menu to select anything comes up. So for instance when My pc is told to lie down, I can only kneel, and that circular menu for selecting actions I see in the screenshot does not appear. So I don't have access to all the other actions. Tis irksome Why would that happen ? What could I be missing from my build that enables these UI additions to work. JUst to be clear, my difficulty is that the menus are not appearing. Could someone perhaps just go over exactly what I need to have installed for me, in order to get the new UI menus for this mod to appear, ta very much. I'm having the exact same problem as you now lol. Restarted a new game with no SL mods, gradually installed each one by one. Now Maria hotkeys set me to kneel or strip, no radial menu...
Funkcikle Posted May 8, 2015 Posted May 8, 2015 well, mariadefaults.json file in the \skse\plugins\StorageUtilData seems to refer to which keys are assigned to do what, as mentioned in a post above us. But what bit of script links pressing key 267/268 to the UI extension which, presumably holds the rest of the animations ? Is it called "UI wheelmenu" ? Hrrm. I'm going to poke at things with my mouse. I can't see any scripts that obviously refer to pressing keys to call UI wheelmenu's, but quite a few have names which don't immediately indicate their use. I just want to know how the wheelmenu is called, then perhaps we can trace it back and see if something is missing from our build.. puzzling. I bet its something blindingly obvious.
BigOnes69 Posted May 8, 2015 Posted May 8, 2015 I have started a new game as instructed installed mod with mod organizer. Using quickstart. Using Daymoyl. Ran FNIS. I go to new and create character then name character and then the character is continually falling in dark space. I can access inventory and items. Map etc.... I assume you are suppose to go to a room or some questions appear to determine your start but nothing happens but continually falling. Went through the process several times. SKSE and everything is up to date. Is there a console command to activate the quick start?
nameless701 Posted May 8, 2015 Posted May 8, 2015 I have started a new game as instructed installed mod with mod organizer. Using quickstart. Using Daymoyl. Ran FNIS. I go to new and create character then name character and then the character is continually falling in dark space. I can access inventory and items. Map etc.... I assume you are suppose to go to a room or some questions appear to determine your start but nothing happens but continually falling. Went through the process several times. SKSE and everything is up to date. Is there a console command to activate the quick start? You have two different startoptions...that can not work.
Recommended Posts