i messed up my Fnis, Help

[Suncee]

Hello Everyone, i hope you're doing well.

so long story short i tried to add the "devious loot v9" mod which i think requires ZAP 9 , i downloaded the ZAP 9, ran fnis, then npcs started Tposing. I tried to rollback and go back to ZAZ 7, but fnis started showing errors such as:

>>Warning: \character\behaviors\FNIS_ZaZAnimationPack7_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack7 V7.00 ...     ChAnims:1693(23)     CTD:13.9%     pOpt:3.2%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack8_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack8 V8.00 ...     ChAnims:904(17)     CTD:6.1%     pOpt:0.1%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack9_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack9 V9.00 ...     ChAnims:309(67)     CTD:2.8%     pOpt:0.4%
        NOTE: ZaZAnimationPack9 has at least one AASet definition without any animation files provided

 

i also run pandora after running Fnis and it all used to work pretty well until ZAP9 was introduced, now i can't seem to go back to what was working.

ps: switching back to ZAZ 7 also meant i crash on new games

ps2: using ZAZ 8 is not working as well

[Psalam]

30 minutes ago, Suncee said:

Hello Everyone, i hope you're doing well.

so long story short i tried to add the "devious loot v9" mod which i think requires ZAP 9 , i downloaded the ZAP 9, ran fnis, then npcs started Tposing. I tried to rollback and go back to ZAZ 7, but fnis started showing errors such as:

>>Warning: \character\behaviors\FNIS_ZaZAnimationPack7_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack7 V7.00 ...     ChAnims:1693(23)     CTD:13.9%     pOpt:3.2%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack8_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack8 V8.00 ...     ChAnims:904(17)     CTD:6.1%     pOpt:0.1%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack9_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack9 V9.00 ...     ChAnims:309(67)     CTD:2.8%     pOpt:0.4%
        NOTE: ZaZAnimationPack9 has at least one AASet definition without any animation files provided

 

i also run pandora after running Fnis and it all used to work pretty well until ZAP9 was introduced, now i can't seem to go back to what was working.

ps: switching back to ZAZ 7 also meant i crash on new games

ps2: using ZAZ 8 is not working as well

It would appear that you are using the LE version of the mod. Get the SE version and this issue should go away.

[Suncee]

i did, i have only ZaZ Animation Pack+ CBBE HDT V.8.0+SE2023.7z active, but still getting 

 

Reading ZaZAnimationPack V8.00 ...     ChAnims:1669     CTD:7.9%     pOpt:0.1%
Reading ZaZAnimationPack+ V8.00 ...     ChAnims:42     CTD:0.2%     pOpt:0.0%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack7_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack7 V7.00 ...     ChAnims:1693(23)     CTD:13.9%     pOpt:3.2%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack8_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack8 V8.00 ...     ChAnims:904(17)     CTD:6.1%     pOpt:0.1%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack9_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack9 V9.00 ...     ChAnims:309(67)     CTD:2.8%     pOpt:0.4%
        NOTE: ZaZAnimationPack9 has at least one AASet definition without any animation files provided
Reading zzEstrus V2.50 ...     ChAnims:277(12)     CTD:3.6%     pOpt:0.2%
 

Edited December 24, 2024 by Suncee
apparently my screenshots don't show up

[pinky6225]

12 minutes ago, Suncee said:

i did, i have only ZaZ Animation Pack+ CBBE HDT V.8.0+SE2023.7z active, but still getting 

 

Reading ZaZAnimationPack V8.00 ...     ChAnims:1669     CTD:7.9%     pOpt:0.1%
Reading ZaZAnimationPack+ V8.00 ...     ChAnims:42     CTD:0.2%     pOpt:0.0%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack7_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack7 V7.00 ...     ChAnims:1693(23)     CTD:13.9%     pOpt:3.2%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack8_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack8 V8.00 ...     ChAnims:904(17)     CTD:6.1%     pOpt:0.1%
>>Warning: \character\behaviors\FNIS_ZaZAnimationPack9_Behavior.hkx not Skyrim SE compatible<<
Reading ZaZAnimationPack9 V9.00 ...     ChAnims:309(67)     CTD:2.8%     pOpt:0.4%
        NOTE: ZaZAnimationPack9 has at least one AASet definition without any animation files provided
Reading zzEstrus V2.50 ...     ChAnims:277(12)     CTD:3.6%     pOpt:0.2%
 

 

Its still show ZaZAnimationPack9 which is only for LE as far as i'm aware so that needs to go

 

I also have  ZAZ 8+ and that only shows

 

Reading ZaZAnimationPack V8.00 ...
Reading ZaZAnimationPack+ V8.00 ...

 

When i run FNIS, if you have 8+ you don't need 7 as 8+ is meant to contain the stuff from 7 so i'd check and uninstall that as well

 

Also make sure to deploy (If you using vortex) or whatever you do in MO to refresh the installed mods before running FNIS again

[Suncee]

Just now, pinky6225 said:

 

Its still show ZaZAnimationPack9 which is only for LE as far as i'm aware so that needs to go

 

I also have  ZAZ 8+ and that only shows

 

Reading ZaZAnimationPack V8.00 ...
Reading ZaZAnimationPack+ V8.00 ...

 

When i run FNIS, if you have 8+ you don't need 7 as 8+ is meant to contain the stuff from 7 so i'd check and uninstall that as well

 

Also make sure to deploy (If you using vortex) or whatever you do in MO to refresh the installed mods before running FNIS again

 

but that's the thing, i have removed them. Using vortex i pressed uninstall, removing both content and archive, but when i deploy and run FNIS, it still detects them and tries to read them leading to CTD on new game, i'm super lost

[pinky6225]

Just now, Suncee said:

 

but that's the thing, i have removed them. Using vortex i pressed uninstall, removing both content and archive, but when i deploy and run FNIS, it still detects them and tries to read them leading to CTD on new game, i'm super lost

 

Turn off auto run FNIS on deploy, deploy, then run FNIS manually (either from vortex or by clicking the FNIS exe - after hard linking it makes no difference) and see if there is a difference

 

My guess its triggering FNIS after it detects the first animation change and not after deploying all changes

[Grey Cloud]

1 hour ago, Suncee said:

i also run pandora after running Fnis and it all used to work pretty well until ZAP9 was introduced, now i can't seem to go back to what was working.

Why are you running both? Use one or t'other. I'd go with FNIS unless you are sure that Pandora works with whichever ZAZ you are going to use.

Edited December 24, 2024 by Grey Cloud

[Suncee]

Just now, Grey Cloud said:

Why are you running both? Use one or t'other.

 

 

for some reason i had to run pandora to get Ostim animations to work, Fnis is for ZAZ/creatures i guess? it's how i got it to work first time so i didn't think i'd change it

[Suncee]

7 minutes ago, pinky6225 said:

 

Turn off auto run FNIS on deploy, deploy, then run FNIS manually (either from vortex or by clicking the FNIS exe - after hard linking it makes no difference) and see if there is a difference

 

My guess its triggering FNIS after it detects the first animation change and not after deploying all changes

 

i'll give it a shot, otherwise i might make the switch to MO, altho finding all the working mods inside my download mess will be rough

[Grey Cloud]

1 minute ago, Suncee said:

 

 

for some reason i had to run pandora to get Ostim animations to work, Fnis is for ZAZ/creatures i guess? it's how i got it to work first time so i didn't think i'd change it

No idea about Ostim but Pandora works with creatures. Earlier Pandoras didn't work with Zaz and some later versions (post v1.5.1) had some problems (not just Zaz).

[Suncee]

i just noticed Pandora also tries to read ZAZ files that i have uninstalled, so the issue is packs that should have been uninstalled are still being read?

[Dorabella]

44 minutes ago, Suncee said:

i just noticed Pandora also tries to read ZAZ files that i have uninstalled, so the issue is packs that should have been uninstalled are still being read?

You may have some trace left . Extract the mod elsewhere (e.g Download section), and with the help of the folders, manually clean up any remnants.

 

Relaunch FNIS , or, whatever other tools you use , as a check on cleanliness .
Reinstall the correct version of ZAZ

[Suncee]

1 hour ago, Dorabella said:

You may have some trace left . Extract the mod elsewhere (e.g Download section), and with the help of the folders, manually clean up any remnants.

 

Relaunch FNIS , or, whatever other tools you use , as a check on cleanliness .
Reinstall the correct version of ZAZ

 

this has helped me clean up FNIS, now no pack i'm not using shows up when running it.

now i have to figure out what's still crashing my game

[Dorabella]

41 minutes ago, Suncee said:

crashing my game

If you have installed mods that require ZAZ , they should be removed and reinstalled with the requirements 

 

 

[Suncee]

24 minutes ago, Dorabella said:

If you have installed mods that require ZAZ , they should be removed and reinstalled with the requirements 

 

 

 

well that's about 90% of my mods xD

[Grey Cloud]

2 hours ago, Suncee said:

 

well that's about 90% of my mods xD

Your mod manager show if you have missing masters.

[dschlaqinwe]

i use ZAZ8+ Pandora no problems i have installt FNIS Nemenis and Pandora after install Pandora i disable Fnis and Nemesis ,works for me.

allso is installet sexlab_to Ostim works perfekt all myhandels over Ostim picture Up start Ostim and the rest work over Content too.

Ostim is a rape machine, you can have sex with anyone unless he is the enemy, even if they are sleeping, picture up on the keyboard the animation starts, when it is over they may say something and continue sleeping, regardless of whether it is Jarl or another NPC.