SexLab P+

[Budoop]

On 12/4/2025 at 8:44 AM, TatsumaruOZ said:

I have the same problem, were you able to fix it? It seems like no one else has it...

I have the opposite problem, im actively trying to male them permanent but they dissapear at random for me.

Correction: They dissappear when the NPCs go through water.

 

Is there any way to disable this?

Edited December 21, 2025 by Budoop

[Chugunder]

Once I got into this menu, I couldn't get out. It's a stalemate; the only solution is the 'qqq' console command. Escape doesn't work, and hotkeys don't work. This menu also doesn't disappear after the next scene. It often crashes. How can I close it properly?

[Fraying9981]

5 hours ago, Chugunder said:

Once I got into this menu, I couldn't get out. It's a stalemate; the only solution is the 'qqq' console command. Escape doesn't work, and hotkeys don't work. This menu also doesn't disappear after the next scene. It often crashes. How can I close it properly?

 

you need to press the 'end' key (default).

[bebop]

@Chugunder You need to disable free cam in the sexlab setting , use wasd to navigate ui and space to select , press end button to close.  if you want to use freecam just press num pad 3

[sher913]

On 12/13/2025 at 8:05 PM, Vigi87 said:

I am having this issue where I cannot start any sexlab scene, after testing a bit, it seems to be SLP+ issue; the error is: 
thread [0] - fatal - failed to add actor -- they are not a valid target for animation | error code -11

Anyone got a solution to this error?

 

 

Edit 1: I found other people having this issue on another thread and the solution is to uninstall SLP+ , just trying my luck if I there is a solution so I can maintain SLP+ on my playthrough 

 

Edit 2: I found the solution and the culprit. 

Just have to go SKSE > Plugins > Sexlab.ini 

Then do the following: 
fMinScale = 0.00

 

It has something to do with height settings, since I am using Sexlab Scaler to automatically fix misalignment so height constantly changes and triggered the min scale there

 

How do you enable sexlab scaler's SLAL animation adjustment option from being greyed out since sexlab p+ uses SLSB

[Tenner]

On 12/6/2025 at 6:37 PM, Polonium said:

Papyrus.0.logI am currently experiencing a crash, it appears to only happen after a sexlab scene with only the player as participant: as far as I can tell, everything appears to function normally until the the animation is over, when the game crashes.skyrimse__06-12-2025_18-34-42.txt
 
If you have any help with troubleshooting I'd appreciate it.
Thanks.

Papyrus.0.log 109.76 kB · 2 downloads

I believe I'm having the same issue, did you ever figure out a solution?

[Polonium]

13 hours ago, Tenner said:

I believe I'm having the same issue, did you ever figure out a solution?

I ended up starting from a clean save. That fixed the issue for me.

[Rushman_93]

It has been a while since I tried to use p+. Perfect performance, however, I can say that the current controls and lack of it in some instances are abysmal.

 

The fact that the menu confirmation hotkey is the same as the stage progress hotkey, makes it so many times I end up ending the scene by using said menu. Similarly, accidental additional click of the close menu hotkey leads to the end of the scene as well. Offsetting doesn't seem currently possible in the version provided. I have also faced a bug where if the scene ends with the menu open, my controls will bug out, and I become unable to open the main menu, inventory, etc.

Edited December 26, 2025 by Rushman_93

[ribaldandvulgar]

Can anyone tell where the appropriate place to report some broken links in the github wiki would be?
The Animation Packs page has two broken links under "Want to Learn More?". The links are missing the "Sexlab-Wiki" part of the URI
https://slp-community.github.io/slsb/slal-vs-slsb/ vs https://slp-community.github.io/SexLab-Wiki/slsb/slal-vs-slsb/
https://slp-community.github.io/slsb/converting-animations/ vs  https://slp-community.github.io/SexLab-Wiki/slsb/converting-animations/

[skyrimfet]

Hey @Scrab

I looked back a bit and I can see that I’m not the first person to report this issue.

I followed the installation instructions, and at around level 35 I decided to upgrade to your version, overwriting the old SexLab installation.

I also installed additional animations and, according to the MCM, I now have around 5,000 animations available. I ran Reinitialize Framework as well. Every time I try to start an animation, I get the following error:

[SexLab] Thread[0] - FATAL - Failed to add actor -- They are not a valid target for animation | Error Code: -11


 

Below I’ve copied a few log lines that are most likely related. Do you have any idea what could be causing this?

I tested both the latest SexLab+ version and a slightly older one.
My game version is 1.6.1170.

 

Quote

[12/26/2025 - 07:43:40PM] [SexLab] Translating 38 Animations to Legacy Class (["0lq4v4iv", "228gp3n1", "443d8qvh", "4avn2382", "4dnc588n", "5gp7l313", "5miycqlj", "5ux2rdu2", "5x7vdud1", "988z3ndz", "a2s00p92", "afnz03bk", "ajpgtxct", "d8wy0b24", "dgv70r3b", "ea1uwjg3", "ew48muzm", "fdxkddvd", "fz2jdv6g", "gud9o2gx", "jc6vm5wo", "klo1aq89", "m6tdkz4n", "ns2kul9c", "pbbf0xyg", "ps18kjj7", "q1q8t8ds", "qcs31oa1", "s2wausrl", "sebl3pax", "t2qtr05l", "tfjol764", "tjx3l510", "u8nobv1r", "uq0sm9i7", "vqh2aywu", "vx6g9nr8", "z8d1np8y"])
[12/26/2025 - 07:43:41PM] [SexLab] Returning 24 Objects (["0lq4v4iv", "228gp3n1", "443d8qvh", "4avn2382", "4dnc588n", "5gp7l313", "5miycqlj", "5ux2rdu2", "5x7vdud1", "988z3ndz", "a2s00p92", "afnz03bk", "ajpgtxct", "d8wy0b24", "dgv70r3b", "ea1uwjg3", "ew48muzm", "fdxkddvd", "fz2jdv6g", "gud9o2gx", "jc6vm5wo", "klo1aq89", "m6tdkz4n", "ns2kul9c", "pbbf0xyg", "ps18kjj7", "q1q8t8ds", "qcs31oa1", "s2wausrl", "sebl3pax", "t2qtr05l", "tfjol764", "tjx3l510", "u8nobv1r", "uq0sm9i7", "vqh2aywu", "vx6g9nr8", "z8d1np8y"])
[12/26/2025 - 07:43:41PM] [SexLab] Thread[0] Entering Setup State
[12/26/2025 - 07:43:41PM] Info: [SexLab] Thread[0] - FATAL - Failed to add actor -- They are not a valid target for animation | Error Code: -11
stack:
    <unknown self>.Debug.TraceStack() - "<native>" Line ?
    <unknown self>.ssllog.Error() - "yhfxelygkv" Line 11
    [SexLabThread00 (07061EEF)].sslThreadController.FATAL() - "qesawhhpramowotcup" Line 2088
    [SexLabThread00 (07061EEF)].sslThreadController.AddActor() - "qesawhhpramowotcup" Line ?
    [SexLabThread00 (07061EEF)].sslThreadController.AddActors() - "qesawhhpramowotcup" Line ?
    [SexLabQuestFramework (07000D62)].sexlabframework.StartSex() - "unahivvuvnpjhxkaeuw" Line 1794
    [sla_Main (08042D62)].slamainscr.StartPCMasturbation() - "slamainscr.psc" Line 635
    [sla_Main (08042D62)].slamainscr.OnKeyUp() - "slamainscr.psc" Line 618
[12/26/2025 - 07:43:41PM] [SexLab] StartSex() - Failed to add some actors to thread
[12/26/2025 - 07:43:41PM] [slamainscr <sla_Main (08042D62)>]: SexLab animation failed to start [-1]
 

 

[KentuckyExpat]

On 12/26/2025 at 12:52 PM, skyrimfet said:

Hey @Scrab

I looked back a bit and I can see that I’m not the first person to report this issue.

I followed the installation instructions, and at around level 35 I decided to upgrade to your version, overwriting the old SexLab installation.

I also installed additional animations and, according to the MCM, I now have around 5,000 animations available. I ran Reinitialize Framework as well. Every time I try to start an animation, I get the following error:

[SexLab] Thread[0] - FATAL - Failed to add actor -- They are not a valid target for animation | Error Code: -11


 

Below I’ve copied a few log lines that are most likely related. Do you have any idea what could be causing this?

I tested both the latest SexLab+ version and a slightly older one.
My game version is 1.6.1170.

 

 

I believe that you need to start a new playthrough if you want to install P+, you can't just overwrite SexLab once you have begun a new game.

Edited December 29, 2025 by KentuckyExpat

[RevanCathal]

On 9/20/2025 at 4:36 PM, KentuckyExpat said:

There is a setting in original SexLab, 'Female to Female Cum' that allows a female (or futa) PC or NPC to ejaculate inside another female. When this setting (in SexLab) is enabled, a message, generated by Fertility Mode*, appears in the top left hand corner of the screen saying, "X came inside Y xx mls". A check of the 'Debug' page in the Fertility Mode MCM shows that Y has xx mls of sperm and that X is the potential father. If those two fields are blank, there can be no pregnancy.

This setting is missing if SexLab P+ is enabled. Without the setting, a female/futa having sex with another female/futa cannot impregnate her. Is there a plan to restore this setting?

 

*I don't know how 'Beeing Female' handles this since I don't use that mod.

Doesn't work for Beeing Female either. Currently testing the lastest fix for it and found while P+ applies cum textures after ejaculation it still doesn't register actual insemination for the pregnancy mod or Fill Her Up. Going downgrade to just sexlab until this gets fixed

[Budoop]

4 hours ago, RevanCathal said:

Doesn't work for Beeing Female either. Currently testing the lastest fix for it and found while P+ applies cum textures after ejaculation it still doesn't register actual insemination for the pregnancy mod or Fill Her Up. Going downgrade to just sexlab until this gets fixed

Can confirm, my futa character cannot receive cum, only give it.

[KentuckyExpat]

2 hours ago, Budoop said:

Can confirm, my futa character cannot receive cum, only give it.

That's odd. Our, mine and RevanCathal's, issue is that our female/futa character is having sex with a female but the message that x was inseminated is missing and so the female never gets pregnant. This also doesn't work in reverse. My female/futa character can't be inseminated by a female/futa NPC. 

[Budoop]

On 12/30/2025 at 3:36 PM, KentuckyExpat said:

That's odd. Our, mine and RevanCathal's, issue is that our female/futa character is having sex with a female but the message that x was inseminated is missing and so the female never gets pregnant. This also doesn't work in reverse. My female/futa character can't be inseminated by a female/futa NPC. 

Similar issue I suppose then.
I dont have pregnancy mods, but I'm trying to get the overlays on my character and can't, none of the futa NPCs can give them to me for some reason.

[KentuckyExpat]

3 hours ago, Budoop said:

Similar issue I suppose then.
I dont have pregnancy mods, but I'm trying to get the overlays on my character and can't, none of the futa NPCs can give them to me for some reason.

As a comment totally outside the discussion, I find that the pregnancy mods, as you refer to them, add to the immersion. You might try them if you haven't already. If you're not familiar with them, they are called "Fertility Mode" and "Beeing Female".

[shrtjsrtj]

Is there a more up to date list of SLSB packs that aren't on Discord? Some of the ones on the wiki are fairly outdated and I don't want to go through the headache of getting on Discord.

 

I had an issue with an earlier version of this mod where it strictly followed gender filters, can I disable this easily now? This is mainly so I can get F/F spanking since all my animations are M/F, but it might also be nice for strap-ons.

[skyrimfet]

@Scrab
According to the description, this mod is supposed to provide SLSO logic, but it seems to do so in a very limited way. There is no possibility to interact with the scene, and there is also no option, for example, to block orgasm while wearing chastity.

There are a few cool mods that require SexLab P. I could even rewrite the logic for Devious Training to add support, but it would need to be clear and well-defined.

In the current situation, the SLSO functionality looks more like a placeholder than a fully implemented system.

[Budoop]

On 1/1/2026 at 3:15 PM, KentuckyExpat said:

As a comment totally outside the discussion, I find that the pregnancy mods, as you refer to them, add to the immersion. You might try them if you haven't already. If you're not familiar with them, they are called "Fertility Mode" and "Beeing Female".

I don't like pregnancy content unfortunately.

[Guest]

How do I enable Lesbian Animations with Strap-ons? I remember that I can just choose from the list of animations and it'll automatically put a strap-on if I just target another female npc but right now it seems that there's only pure lesbian anims (fingering, kissing, and all that). Was there a change or a setting that I need to enable?

[menelias]

Is there any way to make old extra voice mods work? Nothing i try works. Do the modders have to port the audio files? Or what?

[KentuckyExpat]

5 hours ago, menelias said:

Is there any way to make old extra voice mods work? Nothing i try works. Do the modders have to port the audio files? Or what?

You might have better luck getting an answer by contacting the modders who created the files. If the files need some kind of modification other than a patch, it would be the responsibility of the original modder to make the change. 

[seriousssam]

"Unable to accept the invitation." How do I join? I need slsb.exe

Edited January 11 by seriousssam

[Guest]

This is a repack version for people who can't figure it out how install all these mods together. 

[xODDxx]

On 1/11/2026 at 2:22 PM, TrollsCum said:

This is a repack version for people who can't figure it out how install all these mods together. 

 

how do you start a sexlab animation? i see nothing in the hotkey section that starts it with an npc. i read it has a matchmaker built in but i dont see a toggle to get the matchermaker spell or whatever it is.

Edited January 12 by xODDxx