Fairy Tail 2020 Mods

[Renari]

So I was able to dump all the original files from the 1.0 switch version. Does anyone know which files I should upload to get the original data?

[fraggerman]

Still needs work but I am getting somewhere. I have difficulty loading my edited meshes with 3DMigoto but replacing the submesh in the g1m seems to work. ?‍♂️
I'll still try to get them working with 3DMigoto at some point so people can just drag and drop the mod in but to get the model done I'll have to stick to reimporting for now it seems.

Spoiler

 

This is the model replacement with the original textureThis is my WIP replacement texture. I just painted over all of it to get the shadow out for now.

 

[KS212]

Man, those painted on lower belly lines totally look a bit too wide once you can see the actual leg to crotch meet position...

[sonicnu12]

28 minutes ago, fraggerman said:

여전히 일이 필요하지만 어딘가로 가고 있습니다. 편집 한 메시를 3DMigoto로로드하는 데 어려움이 있지만 g1m의 하위 메시를 교체하는 것이 효과가있는 것 같습니다. ?‍♂️
나는 여전히 어떤 시점에서 3DMigoto로 작업하게하려고 노력할 것이므로 사람들은 모드를 끌어서 놓을 수 있지만 모델을 완성하려면 다시 가져 오기를 고수해야 할 것 같습니다.

  숨겨진 내용 공개

 

이것은 원래 텍스처로 모델을 교체 한 것입니다. 이것은 나의 WIP 교체 텍스처입니다. 방금 그림자를 없애기 위해 모든 것을 그렸습니다.

 

 

I am curious about this and how can I use it?

[KS212]

3 minutes ago, sonicnu12 said:

 

I am curious about this and how can I use it?

 

its not ready for use yet. Work in progress.

[Misaki Ki]

1 hour ago, Renari said:

So I was able to dump all the original files from the 1.0 switch version. Does anyone know which files I should upload to get the original data?

 

It depends on how you dumped it, I guess.

filelist-FairyTail-rdb.csv

 

This is the csv contained in Cethleann. Open it in a decent text editor (e.g. notepad++)  'MPR_Eternal_Character_pcm001lucyf_skin_kidsalb' and '

MPR_Eternal_Character_pc004wendy_body_kidsalb' are the ones I'm curious about.      37 minutes ago, fraggerman said: Still needs work but I am getting somewhere. I have difficulty loading my edited meshes with 3DMigoto but replacing the submesh in the g1m seems to work. ?‍♂️ I'll still try to get them working with 3DMigoto at some point so people can just drag and drop the mod in but to get the model done I'll have to stick to reimporting for now it seems.   Reveal hidden contents   This is the model replacement with the original textureThis is my WIP replacement texture. I just painted over all of it to get the shadow out for now.     Looking good! I think that clothing mesh contains a large amount of weights for the body so you can modify a a large chunk of it without too much issue. Pretty soon we're going to have to take a look at the submeshes to see what we can get away with them. I'm not quite sure how to properly add vertex groups to a submesh that didn't already exist yet.

[Ronnie21093]

Thank you all for your hard work. Once all the uncensores are done, could someone make a single download for all of them to make it easier to download, please? ?

[wutooo]

Wendy is censored in the 1.0 switch version too. So unless we are actually missing something from the other characters in the PC version, I don't think the switch files will be much help.

[fraggerman]

Got most of the swimsuit model working (in 3DMigoto, replacing the clothing submesh). The Clothes are skin tight now. Need to fix a lot of clipping and then repaint the texture.

[Misaki Ki]

Here's everything for Lucy. I can't actually test most of it at the moment since I lack game progress, so any feedback is welcomed. Let me know if I missed anything.

 

Lucy v0.5.zip

 

Same deal, command line rdbtool, MaterialEditor.rdb, and drag in the directory. I found a decent way to handle the DXT1 textures, so I have an overall workflow for this now.

 

Erza is next if nothing is wrong with Lucy's files.

[sonicnu12]

44 minutes ago, Misaki Ki said:

Here's everything for Lucy. I can't actually test most of it at the moment since I lack game progress, so any feedback is welcomed. Let me know if I missed anything.

 

Lucy v0.5.zip594.7 kB · 8 downloads

 

Same deal, command line rdbtool, MaterialEditor.rdb, and drag in the directory. I found a decent way to handle the DXT1 textures, so I have an overall workflow for this now.

 

Erza is next if nothing is wrong with Lucy's files.

 

 Thank you for your hard work. You can test this. Please tell me how to use it.

[fraggerman]

Ok, I fixed about 99% of the clipping. That's the best I can do for now. I packed everything needed. You just need to extract it to your FairyTail directory. To replace a texture just replace a DDS in Mods/Lucy/. I included the original DDS files, they get loaded automatically by 3DMigoto. So if you replace one you can see the changes live in the game by pressing F10 to refresh.

Lucy will still look like in my picture above because I didn't include any repainted textures. They are very bad. I changed the format and removed mipmaps in my examples before and that changed skin color and overwrote all skin features like the FairyTail emblem, her navel etc.

 

Going to have a look at some other models to get them working with 3DMigoto as well. 

 

 

Progress on Erza:

Spoiler

Was able to remove most clothing from the base costume. I am trying to get the swimsuit model working but the weights are weird even with the new stuff I learned from lucy  This is going to take a while.
Here's the files if you want to improve on this by repainting textures e.g. Just drop it into the Mods folder. Textures can be replaced by replacing the corresponding dds files in Mods/Erza/.

 

 

Edit: Get the new base mod from here 

I am also redoing all my meshes so removed those

[xnajoe]

4 hours ago, fraggerman said:

Ok, I fixed about 99% of the clipping. That's the best I can do for now. I packed everything needed. You just need to extract it to your FairyTail directory. To replace a texture just replace a DDS in Mods/Lucy/. I included the original DDS files, they get loaded automatically by 3DMigoto. So if you replace one you can see the changes live in the game by pressing F10 to refresh.

Lucy will still look like in my picture above because I didn't include any repainted textures. They are very bad. I changed the format and removed mipmaps in my examples before and that changed skin color and overwrote all skin features like the FairyTail emblem, her navel etc.

 

Going to have a look at some other models to get them working with 3DMigoto as well. 

FAIRY TAIL.7z 2.25 MB · 29 downloads

 

 

Oh cool progress, so do i just extract that Fairy Tail.7z file in to the games root?

[fraggerman]

1 hour ago, xnajoe said:

 

Oh cool progress, so do i just extract that Fairy Tail.7z file in to the games root?

 

5 hours ago, fraggerman said:

You just need to extract it to your FairyTail directory.

 

[xnajoe]

haha ops guess i should have read that better, i saw the Mods/Lucy and was looking for a mod folder. 

[KS212]

14 hours ago, fraggerman said:

Ok, I fixed about 99% of the clipping. That's the best I can do for now. I packed everything needed. You just need to extract it to your FairyTail directory. To replace a texture just replace a DDS in Mods/Lucy/. I included the original DDS files, they get loaded automatically by 3DMigoto. So if you replace one you can see the changes live in the game by pressing F10 to refresh.

Lucy will still look like in my picture above because I didn't include any repainted textures. They are very bad. I changed the format and removed mipmaps in my examples before and that changed skin color and overwrote all skin features like the FairyTail emblem, her navel etc.

 

Going to have a look at some other models to get them working with 3DMigoto as well. 

FAIRY TAIL.7z 2.25 MB · 73 downloads

 

Progress on Erza:

  Reveal hidden contents

Was able to remove most clothing from the base costume. I am trying to get the swimsuit model working but the weights are weird even with the new stuff I learned from lucy  This is going to take a while.
Here's the files if you want to improve on this by repainting textures e.g.Erza.zip Just drop it into the Mods folder. Textures can be replaced by replacing the corresponding dds files in Mods/Erza/.

 

With this ver of the mod, if we used the other inject method do we need to undo that first?

[fraggerman]

1 hour ago, KS212 said:

 

With this ver of the mod, if we used the other inject method do we need to undo that first?

Probably, yes. Reimporting into the rdb changes where stuff is located so you would have to hunt down the hashes and edit the ini files in the mod folder to make them compatible(every time you reimport something). At least that's what my experience was when I tried it.
Depending on what you did you can apply that with the 3DMigoto mod as well. For example the uncensor textures overwrite skin ps-t0 and/or skin ps-t2(pixelshader-texture#). If you reenable soft hunt mode in the d3dx.ini(hunting = 2) and press numpad0 you can search for the shader by rolling through them with numpad1 and numpad2. You found the right one when the body disappears(the ones I found in fairy tail handle clothes and skin, sadly. Would be easier if they were handled by different shaders). Add the shader(hash is in the top left) to the d3dx.ini like in the screenshot. 

Spoiler

Press numpad+ to reset hunt mode. Reenable hunt mode and roll through index buffer hashes(numpad7 and numpad8) until the body base dissapears(the part with skin on it). Add that hash to an ini file of your choice(make a new one for characters other than lucy and erza for better visibility) if you want to make changes to the mesh or the texture. Reset hunt mode, reenable hunt mode and press F8. This will dump everything on screen handled by the shaders listed in d3dx.ini in a FrameAnalysis-datetime folder. All the textures and vertex/index buffers rendered on the screen will be in there. Find the textures that handle the skin by adding their hash(the thing after ps-t#= in their filename) to the ini file and replacing them with something until you find the right one.

 

Repeat for other characters until you're done.

Examples can be found in lucy.ini and erza.ini.

[spiffin]

so this will inject the mod into the game just by throwing the .dll and mod files in the game directory? pasting them into my fairy tail directory just makes the game not load. wont even try to start to load. or are these just for 3Dmigoto?

[fraggerman]

19 minutes ago, spiffin said:

so this will inject the mod into the game just by throwing the .dll and mod files in the game directory? pasting them into my fairy tail directory just makes the game not load. wont even try to start to load. or are these just for 3Dmigoto?

I missed to add a folder to the zip. I reuploaded the fixed zip. 3DMigoto is the mod itself. It hooks into the game and overwrites or blocks what is drawn on the screen. All you should need to do is paste the contents into the FairyTail directory.

Also close the explorer window if you are still in the FairyTail directory. The game won't start for me if I have that open. Don't know why it does this, it's not related to the mod tho.

[Misaki Ki]

21 hours ago, wutooo said:

Wendy is censored in the 1.0 switch version too. So unless we are actually missing something from the other characters in the PC version, I don't think the switch files will be much help.

I was able to find a texture for Erza (possibly her armor on an armor stand or something?) that didn't contain any of the censorship, so we actually do have a comparison on what was removed.

 

Spoiler

This is the censored version:

 

This is what I found:

 

This is what I was able to make with the two:

 

This is the result:

 

 

Granted it's minor, and not something that'll be typically seen, but I feel that having things as close to the original is best. I haven't been able to access the Switch files directly, even with some of the more public options since I don't have access to a modded switch. (TBH, I haven't seen firm confirmation on if the Switch was uncensored on v1.0 or not yet.)

 

Anyway, here are Erza's files; same thing as Lucy - let me know if I missed anything or if there are any problems. Eventually I'd like to adapt these to 3DMigoto in a non-conflicting way, but I'll worry about that when I'm done.

 

Erza v0.5.zip

 

I'm really tempted to mess with the swimsuit models, since they have the entire mesh underneath the bikini tops intact....

[KS212]

20 minutes ago, Misaki Ki said:

I was able to find a texture for Erza (possibly her armor on an armor stand or something?) that didn't contain any of the censorship, so we actually do have a comparison on what was removed.

 

  Reveal hidden contents

This is the censored version:

 

This is what I found:

 

This is what I was able to make with the two:

 

This is the result:

 

 

Granted it's minor, and not something that'll be typically seen, but I feel that having things as close to the original is best. I haven't been able to access the Switch files directly, even with some of the more public options since I don't have access to a modded switch. (TBH, I haven't seen firm confirmation on if the Switch was uncensored on v1.0 or not yet.)

 

Anyway, here are Erza's files; same thing as Lucy - let me know if I missed anything or if there are any problems. Eventually I'd like to adapt these to 3DMigoto in a non-conflicting way, but I'll worry about that when I'm done.

 

Erza v0.5.zip 406.76 kB · 1 download

 

I'm really tempted to mess with the swimsuit models, since they have the entire mesh underneath the bikini tops intact....

 

It may be an idea to copy those and see if you can duplicate them over the normal body.

[Misaki Ki]

8 minutes ago, KS212 said:

 

It may be an idea to copy those and see if you can duplicate them over the normal body.

I already made the texture. It's the same grey color as the surrounding legs, since a skirt is supposed to be over that area. If I just copied it over, the panties would be full-bright with shadows on the legs.

[kunobanget]

56 minutes ago, Misaki Ki said:

I was able to find a texture for Erza (possibly her armor on an armor stand or something?) that didn't contain any of the censorship, so we actually do have a comparison on what was removed.

 

  Reveal hidden contents

This is the censored version:

 

This is what I found:

 

This is what I was able to make with the two:

 

This is the result:

 

 

Granted it's minor, and not something that'll be typically seen, but I feel that having things as close to the original is best. I haven't been able to access the Switch files directly, even with some of the more public options since I don't have access to a modded switch. (TBH, I haven't seen firm confirmation on if the Switch was uncensored on v1.0 or not yet.)

 

Anyway, here are Erza's files; same thing as Lucy - let me know if I missed anything or if there are any problems. Eventually I'd like to adapt these to 3DMigoto in a non-conflicting way, but I'll worry about that when I'm done.

 

Erza v0.5.zip 406.76 kB · 4 downloads

 

I'm really tempted to mess with the swimsuit models, since they have the entire mesh underneath the bikini tops intact....

yeay go for it!

By the way is it possible to add additional alternative costume mods to the wardrobe?

Like for example a version of Lucy default costume but without the vest?

Thanks

 

 

[aflamingo]

Off topic but has anyone figured out which is the outline shader? Wanted to disable it but couldn't find it with SpecialK.

[fraggerman]

I got Lucy in barbie mode now.

Spoiler

This is all I can do with her for now. You will want someone who can actually draw do the genitals. Here's the updated Lucy folder, just unzip it into the mods folder, overwrite the old Lucy files.

 

The body has some seams where the meshes don't line up correctly but with my (very) limited blender experience it'll take some time to get this fixed. ?

 

Edit: removed the zip. Redoing my meshes