[Wip] Official Tnt Custom Race Thread - Or, What The Femboy Idea Turned Into

[silvernirvash]

 

 

 

Thanks for the Alpha meshes

Hope there more work done on this at some point 

who knows  maybe i,ll find some skills and help /lol

anyway here's Bobbi

 

 

 

where did you find the CLOTHES!?

 

They look like a low weight,possibly modified version of the ironically appropriately named Bobble Pop Boys Clothes pack.

The thong,though,is unfamiliar to me but it looks intriguing not only because it looks nice on the intended gender to wear it,but it might work for other non-fem-boy mixed-gender female based characters,as well.

 

▲ this tbh rather bad outfit studio hackery for the outfit , deleted the body mesh / reassigned the item slot number and did my best to form it around the body, molded around da package

The thong is from a mashed mod i don't recall exactly but was able to pull the mesh out and graft on a flaccid penis, but keep it slot 52 so on unequip  working unit is available

 

well however you went about it....GOOD JOB.....oh and package it up into a zip folder for lil adorable me please? :3

[prakhan]

Well thanks for the kind words  i guess i could send you the meshes for the converted Bobble Pop Boys Clothes 

you would still need the original mod

As far as the thong i,ll have to dig around my game find the mod and make a patch for the original mod as well

of course you would need the alpha meshes listed on the front page  for the body 

the ones i,m using are loaded in the custom race mod  which i doubt would work for anyone but me as my game is a one of a kind mess /sigh

hope this made some kinda sense 

[jagged0]

 

 

 

All right, it's time for an actual progress report. During these last year I've been working on this project on and off, had quite a bit of learning to do, a bunch of ragequits and also a lot of research on what was the best body to use as a base. I tried quite a few UNP based bodies: ashen trap, litheria, unp skinny, bodies created with the old unp bodyslide by stuffedbunny, UnpCM and UUNP. I've also tried other bodytypes like Dream Girl, CITRUS and even lady body/demonica. In the end all of these could have been viable solution but I decided to stick with UNPCM for a simple reason: the weighting is a work of art. You simply can't find a body that looks better than this when in actual motion (Dream Girl by Petrovich actually comes really close but it's not fully compatible with unp uv maps).

So now that I have finally set my mind on what I actually want and I somewhat gathered the bits of knowledge to actually realize it, things have been coming along quite nicely and progress in the last weeks has been smooth (apart from the exporting nifs from blender nightmare).

Here's a screenshot of a newly created character with one of the default breton presets (nothing too fancy).

 

 

 

I still need to tweak the wrists and neck areas, make a _0 weight version and then it should be hopefully done. At least the body part, then there's the armor/outfits conversion part, unless we want our femboys to go around the frozen lands of skyrim buck naked

ZOMG YAY!!!! Oh and someone needs to at some point along the way make a custom texture for the body LOL because let's be realistic. walking around with a flat chest but with textures that have obvious breasts on them is a bit awkward hahaha then again as you said....we won't be walking around the frozen lands of skyrim buck naked....OR WILL WE!?

 

It's kinda funny that you would mention it, because that screenshot uses fair skin complexion which gives you options for flat diffuse and normal maps, but I still only use flat diffuse maps to get some shadows, since the chest it's not completely flat. The only thing I really dislike about this textures is how the nipples look so big and pinkish.

Anyway, I guess from time to time taking a stroll around Skyrim in our birthday suit wouldn't be too bad, you know, sunbathing in Whiterun grass fields, taking a dip in lake Honrich, that kind of thing

 

sure....taking a dip in lake Honrich....sure that's what i was thinking of doing ..... LOL

 

 

Try this > https://8ch.net/shota/res/2082.htmlit should fit what you're looking for.

 

-Edit site is down should be back up wait a couple of minutes image of the mod. 

 

 

 

 

 

 

 

[silvernirvash]

 

 

 

 

All right, it's time for an actual progress report. During these last year I've been working on this project on and off, had quite a bit of learning to do, a bunch of ragequits and also a lot of research on what was the best body to use as a base. I tried quite a few UNP based bodies: ashen trap, litheria, unp skinny, bodies created with the old unp bodyslide by stuffedbunny, UnpCM and UUNP. I've also tried other bodytypes like Dream Girl, CITRUS and even lady body/demonica. In the end all of these could have been viable solution but I decided to stick with UNPCM for a simple reason: the weighting is a work of art. You simply can't find a body that looks better than this when in actual motion (Dream Girl by Petrovich actually comes really close but it's not fully compatible with unp uv maps).

So now that I have finally set my mind on what I actually want and I somewhat gathered the bits of knowledge to actually realize it, things have been coming along quite nicely and progress in the last weeks has been smooth (apart from the exporting nifs from blender nightmare).

Here's a screenshot of a newly created character with one of the default breton presets (nothing too fancy).

 

 

 

I still need to tweak the wrists and neck areas, make a _0 weight version and then it should be hopefully done. At least the body part, then there's the armor/outfits conversion part, unless we want our femboys to go around the frozen lands of skyrim buck naked

ZOMG YAY!!!! Oh and someone needs to at some point along the way make a custom texture for the body LOL because let's be realistic. walking around with a flat chest but with textures that have obvious breasts on them is a bit awkward hahaha then again as you said....we won't be walking around the frozen lands of skyrim buck naked....OR WILL WE!?

 

It's kinda funny that you would mention it, because that screenshot uses fair skin complexion which gives you options for flat diffuse and normal maps, but I still only use flat diffuse maps to get some shadows, since the chest it's not completely flat. The only thing I really dislike about this textures is how the nipples look so big and pinkish.

Anyway, I guess from time to time taking a stroll around Skyrim in our birthday suit wouldn't be too bad, you know, sunbathing in Whiterun grass fields, taking a dip in lake Honrich, that kind of thing

 

sure....taking a dip in lake Honrich....sure that's what i was thinking of doing ..... LOL

 

 

Try this > https://8ch.net/shota/res/2082.htmlit should fit what you're looking for.

 

-Edit site is down should be back up wait a couple of minutes image of the mod. 

 

>//w//>  i already use mods like that ......<//w//< wait wut? i didn't say that.

 

either way in reality i am a femboi so i'd very much like to be able to play as one rather than a shota.

[MetalMax]

okay, so is this mod going to be a femboy over *males* or *females*

 

I want to play as a femboy over males, since I have pregnancy mods in. Not twinks, *femboys*. I just hate muscular looking characters, so I often play femboy characters. :/

 

That being said, No, I don't want to use the slim body with milkdrinker textures, I want the male character, *not female* to look girly, not just slim.

[Jarka Ruus]

okay, so is this mod going to be a femboy over *males* or *females*

 

I want to play as a femboy over males, since I have pregnancy mods in. Not twinks, *femboys*. I just hate muscular looking characters, so I often play femboy characters. :/

 

That being said, No, I don't want to use the slim body with milkdrinker textures, I want the male character, *not female* to look girly, not just slim.

The problem is that male faces are quite bad, from the mesh and its morphs to the textures (there's some good texture but if you mix and match too much you end up with the dreaded seams). You could try putting a female head on a male body but then again fxing the seams would be quite the pain. Basically we need somebody proficient with texturing, otherwise it's better sticking to females, plus you need to take into account that it would be a separate race so you wouldn't be really playing as a female.

[MetalMax]

 

okay, so is this mod going to be a femboy over *males* or *females*

 

I want to play as a femboy over males, since I have pregnancy mods in. Not twinks, *femboys*. I just hate muscular looking characters, so I often play femboy characters. :/

 

That being said, No, I don't want to use the slim body with milkdrinker textures, I want the male character, *not female* to look girly, not just slim.

The problem is that male faces are quite bad, from the mesh and its morphs to the textures (there's some good texture but if you mix and match too much you end up with the dreaded seams). You could try putting a female head on a male body but then again fxing the seams would be quite the pain. Basically we need somebody proficient with texturing, otherwise it's better sticking to females, plus you need to take into account that it would be a separate race so you wouldn't be really playing as a female.

 

That won't work. I have a pregnancy mod, and to top it off, the game would still treat the character like they're female, and I just don't want that. I can do textures, but I'm better with cartoon characters, not realistic ones, so as much as I'd love to lend a hand, I'm afraid i wouldn't be of much help.

 

Also, for the record, I'm trying to use modded races, and replace their bodies with this, so the head being ugly is literally of no problem to me, since I'm using anthro/furry characters, and trying to replace their body with a femboy body.

[Jarka Ruus]

 

 

okay, so is this mod going to be a femboy over *males* or *females*

 

I want to play as a femboy over males, since I have pregnancy mods in. Not twinks, *femboys*. I just hate muscular looking characters, so I often play femboy characters. :/

 

That being said, No, I don't want to use the slim body with milkdrinker textures, I want the male character, *not female* to look girly, not just slim.

The problem is that male faces are quite bad, from the mesh and its morphs to the textures (there's some good texture but if you mix and match too much you end up with the dreaded seams). You could try putting a female head on a male body but then again fxing the seams would be quite the pain. Basically we need somebody proficient with texturing, otherwise it's better sticking to females, plus you need to take into account that it would be a separate race so you wouldn't be really playing as a female.

That won't work. I have a pregnancy mod, and to top it off, the game would still treat the character like they're female, and I just don't want that.

As I said with a custom race you would bypass this problem because you would be able to set it as a male even with female meshes. Moreover the meshes won't have belly or breasts weights, so that wouldn't be an issue in the first place.

Btw, I was just talking in general when I said we need texturers.

[MetalMax]

 

 

 

okay, so is this mod going to be a femboy over *males* or *females*

 

I want to play as a femboy over males, since I have pregnancy mods in. Not twinks, *femboys*. I just hate muscular looking characters, so I often play femboy characters. :/

 

That being said, No, I don't want to use the slim body with milkdrinker textures, I want the male character, *not female* to look girly, not just slim.

The problem is that male faces are quite bad, from the mesh and its morphs to the textures (there's some good texture but if you mix and match too much you end up with the dreaded seams). You could try putting a female head on a male body but then again fxing the seams would be quite the pain. Basically we need somebody proficient with texturing, otherwise it's better sticking to females, plus you need to take into account that it would be a separate race so you wouldn't be really playing as a female.

That won't work. I have a pregnancy mod, and to top it off, the game would still treat the character like they're female, and I just don't want that.

As I said with a custom race you would bypass this problem because you would be able to set it as a male even with female meshes. Moreover the meshes won't have belly or breasts weights, so that wouldn't be an issue in the first place.

Btw, I was just talking in general when I said we need texturers.

 

Ah, I misunderstood you then. I thought you were telling me i'd be forced to play a female character as the meshes wouldn't work to replace the male body.  I apologize.

[SilkenLayla]

Well, I've read this whole thread, and it seems there are a lot of keen and sharp minds in here.

 

This thread is the entire reason I've made an account here, and I can't wait for this mod to be finished. I would definitely be one of the first down-loaders. If you want I may be able to help a bit, i'm not really skilled but soon will be. It's what I will be going to school for in the spring (coding, software engineering, and video game making).

 

So I will be more then happy to help provide feedback as far as game play goes.

 

If this mod has a solid commitment to it and support, once it's ready for downloading AND in mostly good working order (because there are always bugs), I think I will be donating to the cause here! Because we need way more mods like this!

Edited October 28, 2015 by SilkenLayla

[silvernirvash]

any updates by chance? >W< i soooo want to play skyrim again but with out this mod i'm less interested in it now ;w;

[ItalianDragon]

Heyo everyone !

I wanted to apologise for the huge silence on my end. Truth is, my GPU died back in October and this made my PC unusable (obviously). I had access to PC's thanks to the univ's library but loverslab is a tad too NSFW to be browsed there Due to that sadly the modding on my end came to a screeching halt (hard to do modding without a working PC obviously) so sadly progress since my last update is still 0.
That said I now have an entirely new RIG and I'm gonna try to find some time between exams to reinstall 3ds Max, Mudbox, NifSkope and Skyrim and resume my work.

So rest assured I haven't given up at all on the mod, I just ran into some technical difficulties ^^
I hope I'll be able o give everyone a proper update in the upcoming weeks

[silvernirvash]

Heyo everyone !

 

I wanted to apologise for the huge silence on my end. Truth is, my GPU died back in October and this made my PC unusable (obviously). I had access to PC's thanks to the univ's library but loverslab is a tad too NSFW to be browsed there Due to that sadly the modding on my end came to a screeching halt (hard to do modding without a working PC obviously) so sadly progress since my last update is still 0.

That said I now have an entirely new RIG and I'm gonna try to find some time between exams to reinstall 3ds Max, Mudbox, NifSkope and Skyrim and resume my work.

So rest assured I haven't given up at all on the mod, I just ran into some technical difficulties ^^

I hope I'll be able o give everyone a proper update in the upcoming weeks

firstly OH NO NOT UR GPU ;W; i'm glad you got a new rig set up!

 

Secondly why not just rip the hard drive from your old rig and put it in your new rig? owo;; unless you out right wiped the old rigs HDD you should still have skyrim and all of your other programs installed to it so they should all work just fine.

[ItalianDragon]

 

Heyo everyone !

 

I wanted to apologise for the huge silence on my end. Truth is, my GPU died back in October and this made my PC unusable (obviously). I had access to PC's thanks to the univ's library but loverslab is a tad too NSFW to be browsed there Due to that sadly the modding on my end came to a screeching halt (hard to do modding without a working PC obviously) so sadly progress since my last update is still 0.

That said I now have an entirely new RIG and I'm gonna try to find some time between exams to reinstall 3ds Max, Mudbox, NifSkope and Skyrim and resume my work.

So rest assured I haven't given up at all on the mod, I just ran into some technical difficulties ^^

I hope I'll be able o give everyone a proper update in the upcoming weeks

firstly OH NO NOT UR GPU ;W; i'm glad you got a new rig set up!

 

Secondly why not just rip the hard drive from your old rig and put it in your new rig? owo;; unless you out right wiped the old rigs HDD you should still have skyrim and all of your other programs installed to it so they should all work just fine.

 

 

I'm in the process of figuring on how do use my old drive as a C: as the mobo I had and the one I have now are entirely different. I got in touch with the manufacturer (MSI) and they told me that it's a chipset incompatibility issue (which is rather logical since my previous mobo, the MSI P55-CD53, released in in 2010 while the one I'm running on now, the MSI X99S SLI PLUS, got released back in May 2015).

 

Specifically what happens when I try to boot on the old drive with my current rig is this: loading goes smoothly until 3/4 through the Win7 logo who shows up during load upon chich the PC just reboots and it just does this over and over again. Wht I'm probably gonna do is get in touch with MSI so they can tell me which of the .sys files are the ones of the old mobo so I can delete them and thus hard delete the drivers (and having done that I hope I can achieve a boot on the old install).

 

 

I kept the old C: drive because due to the rather abrupt death of the GPU I didn't have the time to prepare anything to switch from one install to another and it's full of important data I want to retrieve.

[silvernirvash]

 

 

Heyo everyone !

 

I wanted to apologise for the huge silence on my end. Truth is, my GPU died back in October and this made my PC unusable (obviously). I had access to PC's thanks to the univ's library but loverslab is a tad too NSFW to be browsed there Due to that sadly the modding on my end came to a screeching halt (hard to do modding without a working PC obviously) so sadly progress since my last update is still 0.

That said I now have an entirely new RIG and I'm gonna try to find some time between exams to reinstall 3ds Max, Mudbox, NifSkope and Skyrim and resume my work.

So rest assured I haven't given up at all on the mod, I just ran into some technical difficulties ^^

I hope I'll be able o give everyone a proper update in the upcoming weeks

firstly OH NO NOT UR GPU ;W; i'm glad you got a new rig set up!

 

Secondly why not just rip the hard drive from your old rig and put it in your new rig? owo;; unless you out right wiped the old rigs HDD you should still have skyrim and all of your other programs installed to it so they should all work just fine.

 

 

I'm in the process of figuring on how do use my old drive as a C: as the mobo I had and the one I have now are entirely different. I got in touch with the manufacturer (MSI) and they told me that it's a chipset incompatibility issue (which is rather logical since my previous mobo, the MSI P55-CD53, released in in 2010 while the one I'm running on now, the MSI X99S SLI PLUS, got released back in May 2015).

 

Specifically what happens when I try to boot on the old drive with my current rig is this: loading goes smoothly until 3/4 through the Win7 logo who shows up during load upon chich the PC just reboots and it just does this over and over again. Wht I'm probably gonna do is get in touch with MSI so they can tell me which of the .sys files are the ones of the old mobo so I can delete them and thus hard delete the drivers (and having done that I hope I can achieve a boot on the old install).

 

 

I kept the old C: drive because due to the rather abrupt death of the GPU I didn't have the time to prepare anything to switch from one install to another and it's full of important data I want to retrieve.

 

uhmmm the MOBO should have nothing to do with your harddrive. Just put the old drive where the new rigs main drive is and make the drive from your new rig your secondary drive. it's actually rather easy. O_o;;

[ItalianDragon]

 

 

 

Heyo everyone !

 

I wanted to apologise for the huge silence on my end. Truth is, my GPU died back in October and this made my PC unusable (obviously). I had access to PC's thanks to the univ's library but loverslab is a tad too NSFW to be browsed there Due to that sadly the modding on my end came to a screeching halt (hard to do modding without a working PC obviously) so sadly progress since my last update is still 0.

That said I now have an entirely new RIG and I'm gonna try to find some time between exams to reinstall 3ds Max, Mudbox, NifSkope and Skyrim and resume my work.

So rest assured I haven't given up at all on the mod, I just ran into some technical difficulties ^^

I hope I'll be able o give everyone a proper update in the upcoming weeks

firstly OH NO NOT UR GPU ;W; i'm glad you got a new rig set up!

 

Secondly why not just rip the hard drive from your old rig and put it in your new rig? owo;; unless you out right wiped the old rigs HDD you should still have skyrim and all of your other programs installed to it so they should all work just fine.

 

 

I'm in the process of figuring on how do use my old drive as a C: as the mobo I had and the one I have now are entirely different. I got in touch with the manufacturer (MSI) and they told me that it's a chipset incompatibility issue (which is rather logical since my previous mobo, the MSI P55-CD53, released in in 2010 while the one I'm running on now, the MSI X99S SLI PLUS, got released back in May 2015).

 

Specifically what happens when I try to boot on the old drive with my current rig is this: loading goes smoothly until 3/4 through the Win7 logo who shows up during load upon chich the PC just reboots and it just does this over and over again. Wht I'm probably gonna do is get in touch with MSI so they can tell me which of the .sys files are the ones of the old mobo so I can delete them and thus hard delete the drivers (and having done that I hope I can achieve a boot on the old install).

 

 

I kept the old C: drive because due to the rather abrupt death of the GPU I didn't have the time to prepare anything to switch from one install to another and it's full of important data I want to retrieve.

 

uhmmm the MOBO should have nothing to do with your harddrive. Just put the old drive where the new rigs main drive is and make the drive from your new rig your secondary drive. it's actually rather easy. O_o;;

 

 

Yeah that's what I've done ATM. It's just that plenty of stuff isn't exactly easy to recover from it when you're using a different windows install (like for all the bookmarks n'shit I have on Firefox as to get those backs you have to manage to retrieve the entire profile you've used (which contains stuff I can also ditch).

 

Well the mobo causes issues because I just did a massive upgrade. My previous mobo was old so it's causing compatibility issues (hence why I can't just plug my old drive as a C: and just go with it with the data moving and such).

 

[silvernirvash]

 

 

 

 

Heyo everyone !

 

I wanted to apologise for the huge silence on my end. Truth is, my GPU died back in October and this made my PC unusable (obviously). I had access to PC's thanks to the univ's library but loverslab is a tad too NSFW to be browsed there Due to that sadly the modding on my end came to a screeching halt (hard to do modding without a working PC obviously) so sadly progress since my last update is still 0.

That said I now have an entirely new RIG and I'm gonna try to find some time between exams to reinstall 3ds Max, Mudbox, NifSkope and Skyrim and resume my work.

So rest assured I haven't given up at all on the mod, I just ran into some technical difficulties ^^

I hope I'll be able o give everyone a proper update in the upcoming weeks

firstly OH NO NOT UR GPU ;W; i'm glad you got a new rig set up!

 

Secondly why not just rip the hard drive from your old rig and put it in your new rig? owo;; unless you out right wiped the old rigs HDD you should still have skyrim and all of your other programs installed to it so they should all work just fine.

 

 

I'm in the process of figuring on how do use my old drive as a C: as the mobo I had and the one I have now are entirely different. I got in touch with the manufacturer (MSI) and they told me that it's a chipset incompatibility issue (which is rather logical since my previous mobo, the MSI P55-CD53, released in in 2010 while the one I'm running on now, the MSI X99S SLI PLUS, got released back in May 2015).

 

Specifically what happens when I try to boot on the old drive with my current rig is this: loading goes smoothly until 3/4 through the Win7 logo who shows up during load upon chich the PC just reboots and it just does this over and over again. Wht I'm probably gonna do is get in touch with MSI so they can tell me which of the .sys files are the ones of the old mobo so I can delete them and thus hard delete the drivers (and having done that I hope I can achieve a boot on the old install).

 

 

I kept the old C: drive because due to the rather abrupt death of the GPU I didn't have the time to prepare anything to switch from one install to another and it's full of important data I want to retrieve.

 

uhmmm the MOBO should have nothing to do with your harddrive. Just put the old drive where the new rigs main drive is and make the drive from your new rig your secondary drive. it's actually rather easy. O_o;;

 

 

Yeah that's what I've done ATM. It's just that plenty of stuff isn't exactly easy to recover from it when you're using a different windows install (like for all the bookmarks n'shit I have on Firefox as to get those backs you have to manage to retrieve the entire profile you've used (which contains stuff I can also ditch).

 

Well the mobo causes issues because I just did a massive upgrade. My previous mobo was old so it's causing compatibility issues (hence why I can't just plug my old drive as a C: and just go with it with the data moving and such).

 

 

well firstly if you're using your old drive as the main drive than there is no different windows install. So there should be nothing to worry about. However if you are using a different version of windows *idk why you would be doing that personally* just find the data created for firefox and copy it over to the new drive where it should be located. So for instance i use chrome and variations on chrome. If i want to find the user data with out doing it all manually myself i just go to the folder, Users>usernamehere>appdata>local>chrome>user data. and in are the files related to such things as my profile info and i believe book mark data. However Chrome *and i can assume firefox* has a book mark export feature allowing me to save my bookmarks to a txt file and manually import them all to another browser. I currently use UC Browser which is a variant on Chrome with a slew of awesome features but requires me to manually import my bookmarks myself via txt file. So just do that. I still don't understand why people like firefox if it doesn't have account syncing or even the ability to export bookmark data for alternative browser use.

 

and how old is your old drive? Here's an idea if you can afford it, just buy an internal to external drive converter and plug it in via usb instead.

[ItalianDragon]

 

 

 

 

 

Heyo everyone !

 

I wanted to apologise for the huge silence on my end. Truth is, my GPU died back in October and this made my PC unusable (obviously). I had access to PC's thanks to the univ's library but loverslab is a tad too NSFW to be browsed there Due to that sadly the modding on my end came to a screeching halt (hard to do modding without a working PC obviously) so sadly progress since my last update is still 0.

That said I now have an entirely new RIG and I'm gonna try to find some time between exams to reinstall 3ds Max, Mudbox, NifSkope and Skyrim and resume my work.

So rest assured I haven't given up at all on the mod, I just ran into some technical difficulties ^^

I hope I'll be able o give everyone a proper update in the upcoming weeks

firstly OH NO NOT UR GPU ;W; i'm glad you got a new rig set up!

 

Secondly why not just rip the hard drive from your old rig and put it in your new rig? owo;; unless you out right wiped the old rigs HDD you should still have skyrim and all of your other programs installed to it so they should all work just fine.

 

 

I'm in the process of figuring on how do use my old drive as a C: as the mobo I had and the one I have now are entirely different. I got in touch with the manufacturer (MSI) and they told me that it's a chipset incompatibility issue (which is rather logical since my previous mobo, the MSI P55-CD53, released in in 2010 while the one I'm running on now, the MSI X99S SLI PLUS, got released back in May 2015).

 

Specifically what happens when I try to boot on the old drive with my current rig is this: loading goes smoothly until 3/4 through the Win7 logo who shows up during load upon chich the PC just reboots and it just does this over and over again. Wht I'm probably gonna do is get in touch with MSI so they can tell me which of the .sys files are the ones of the old mobo so I can delete them and thus hard delete the drivers (and having done that I hope I can achieve a boot on the old install).

 

 

I kept the old C: drive because due to the rather abrupt death of the GPU I didn't have the time to prepare anything to switch from one install to another and it's full of important data I want to retrieve.

 

uhmmm the MOBO should have nothing to do with your harddrive. Just put the old drive where the new rigs main drive is and make the drive from your new rig your secondary drive. it's actually rather easy. O_o;;

 

 

Yeah that's what I've done ATM. It's just that plenty of stuff isn't exactly easy to recover from it when you're using a different windows install (like for all the bookmarks n'shit I have on Firefox as to get those backs you have to manage to retrieve the entire profile you've used (which contains stuff I can also ditch).

 

Well the mobo causes issues because I just did a massive upgrade. My previous mobo was old so it's causing compatibility issues (hence why I can't just plug my old drive as a C: and just go with it with the data moving and such).

 

 

well firstly if you're using your old drive as the main drive than there is no different windows install. So there should be nothing to worry about. However if you are using a different version of windows *idk why you would be doing that personally* just find the data created for firefox and copy it over to the new drive where it should be located. So for instance i use chrome and variations on chrome. If i want to find the user data with out doing it all manually myself i just go to the folder, Users>usernamehere>appdata>local>chrome>user data. and in are the files related to such things as my profile info and i believe book mark data. However Chrome *and i can assume firefox* has a book mark export feature allowing me to save my bookmarks to a txt file and manually import them all to another browser. I currently use UC Browser which is a variant on Chrome with a slew of awesome features but requires me to manually import my bookmarks myself via txt file. So just do that. I still don't understand why people like firefox if it doesn't have account syncing or even the ability to export bookmark data for alternative browser use.

 

and how old is your old drive? Here's an idea if you can afford it, just buy an internal to external drive converter and plug it in via usb instead.

 

 

Well yeah that's why I wanted to use the old main as a main in the new rig but those driver issues prevent me from doing just that. As for Firefox I've indeed been able to recover all the bookmarks and suchbut plenty of other data remains to retrieve (sadly).

 

My old drive isn't very old so it's not a problem on that end ^^. As I said the main hassle right now is managing to gather all the data from the old one and moving it to the new one alongside with a complete reinstall of a plethora of software (3ds Max, Mudbox and NifSkope being on the top part of hte list). The problem is thatwhilst most of the data is easily recoverable, for other programs the data I wanna get back is stored god-knows-where on the drive so it's gonna take me quite a bit of time to get that back (and that process would be easier if I could just boot on the old drive but obviously I can't right now due to that driver compatibility issue).

 

[Newbie2015]

Hi guys. This mod sounds awesome, thank you for your work! Id really like to play femboy character can you please explain how to install your mod? I downloaded pre-alpha mesh and installed it with Nexus mod manager and when im starting new game theres only vanilla textures for male/female bretons. What im doing wrong? What mods do i need to use to make this work correctly? Thank you in advance.

[silvernirvash]

Hi guys. This mod sounds awesome, thank you for your work! Id really like to play femboy character can you please explain how to install your mod? I downloaded pre-alpha mesh and installed it with Nexus mod manager and when im starting new game theres only vanilla textures for male/female bretons. What im doing wrong? What mods do i need to use to make this work correctly? Thank you in advance.

the alpha mesh isn't meant to be used. i believe it's just a 3ds max/maya/zbrush file i could be wrong of course. this isn't a working mod that's been released yet i'm looking to try and help the author out but i'm sadly too busy right now with my studies to do anything but if there's anything they need i can see what i can do to help them out. Until then this mod isn't actually released.

[Newbie2015]

 

Hi guys. This mod sounds awesome, thank you for your work! Id really like to play femboy character can you please explain how to install your mod? I downloaded pre-alpha mesh and installed it with Nexus mod manager and when im starting new game theres only vanilla textures for male/female bretons. What im doing wrong? What mods do i need to use to make this work correctly? Thank you in advance.

the alpha mesh isn't meant to be used. i believe it's just a 3ds max/maya/zbrush file i could be wrong of course. this isn't a working mod that's been released yet i'm looking to try and help the author out but i'm sadly too busy right now with my studies to do anything but if there's anything they need i can see what i can do to help them out. Until then this mod isn't actually released.

 

 

Hi. oh i see now. Thank you.

 

[prakhan]

 

 

Hi guys. This mod sounds awesome, thank you for your work! Id really like to play femboy character can you please explain how to install your mod? I downloaded pre-alpha mesh and installed it with Nexus mod manager and when im starting new game theres only vanilla textures for male/female bretons. What im doing wrong? What mods do i need to use to make this work correctly? Thank you in advance.

the alpha mesh isn't meant to be used. i believe it's just a 3ds max/maya/zbrush file i could be wrong of course. this isn't a working mod that's been released yet i'm looking to try and help the author out but i'm sadly too busy right now with my studies to do anything but if there's anything they need i can see what i can do to help them out. Until then this mod isn't actually released.

 

 

Hi. oh i see now. Thank you.

 

 

As mentioned before if you install custom race mod http://www.nexusmods.com/skyrim/mods/8720/?

and replace the say the nord female mesh with the alpha ones you can use them  amusing you pick  the female "custom Nord" race

its my "go to mod" for trying custom bodies just follow the install directions and edit /replace the meshes and or textures with what you want its fairly easy specialty if your using Mod Manager which i highly recommend

hope that helps 

[Newbie2015]

As mentioned before if you install custom race mod http://www.nexusmods.com/skyrim/mods/8720/?

and replace the say the nord female mesh with the alpha ones you can use them  amusing you pick  the female "custom Nord" race

its my "go to mod" for trying custom bodies just follow the install directions and edit /replace the meshes and or textures with what you want its fairly easy specialty if your using Mod Manager which i highly recommend

hope that helps 

 

Hi.Thank you for help il try it out.

[Findri]

Hi guys! .... a friend told me of this thread and that u might be interested in some retextures I did to my female character

 

u can download some more pics in this post

http://www.loverslab.com/topic/53953-futa-content-thread-mods-outfits-pics-updated-2116/?p=1482241

[Newbie2015]

Hi guys! .... a friend told me of this thread and that u might be interested in some retextures I did to my female character

 

u can download some more pics in this post

 

http://www.loverslab.com/topic/53953-futa-content-thread-mods-outfits-pics-updated-2116/?p=1482241

 

Hi. Man this is AWESOME <3! I was dreaming to play character like this  from my first day of Skyrim. Can u please tell me is it possible to download this retextures?