zarantha Posted July 7, 2019 Share Posted July 7, 2019 On 7/5/2019 at 4:47 PM, Arcelias said: Ok so I looked into vortex and looked into manage file conflicts and found this in Deviously Cursed Loot 6.4 SE BETA 2 Textures Devious Cursedloot Hide contents dcur_cursedboots_d.dds dcur_cursedboots_em.dds dcur_cursedboots_n.dds dcur_metalblack_d.dds dcur_metalblack_em.dds dcur_metalblack_n.dds dcur_metalgrey_d.dds mixedzazmetals01.dds mixedzazmetals01_n.dds Across from it is DDX 4.1 SE BETA 2 as the (default) and I can change it to Deviously Cursed Loot 6.4 SE BETA 2 But im not sure if this is the reason why the whole children problem occurs. The quest error might come from this, but im not quite sure. And I have noticed that "FNIS data" also has a conflict with the actual FNIS Behavior SE 7_4_5-3038-7-4-5, but that's just animations. I've left FNIS completely untouched so I don't believe its the reason why I have the problem as stated above. vortex probably isn't loading it correctly if you haven't resolved the conflicts. DDx and DCL are made by the same people, so it shouldn't matter which overwrites - I usually have DCL overwrite DDx. For FNIS, your FNIS data should overwrite FNIS, that's the updated files from when FNIS runs. you can also try installing the latest files, but you need to start a new game if you do the upgrade. DDa3.0SE: https://mega.nz/#!SFJTRbwY!eBqmEUCWkiEiwv8uscb_QabNcd44Xkc5opCG3gu-7b0 DDi4.2SE: https://mega.nz/#!rJBSzY7Z!wUMb9-0N__WAVH_0uIZwApMXmeimmHJdwsnFe_2SOkI DDx4.2SE: https://mega.nz/#!qJhV1YbQ!XaLB261Wpka0xn2jDqAqypc9dzlcvcI18d7_3dhn9EQ DDi dll (skyrim 1.5.73 skse64 2.0.15): https://mega.nz/#!uRhFVQLA!g3DS1YDCJ0yjq1GBxSp4t480_KeXct7mFwAlbVQIMXo DDi dll (skyrim 1.5.8.0 skse64 2.0.1.6): https://mega.nz/#!NbQXBa4I!2VI0bWOmfsEhEsgTfoVNOzRMhmYgMp4vDXg-VKJMwec DD Hotfix: https://mega.nz/#!SRJmRagK!tj91HO0PWKoW0KocrfKkI3IZQPxTzvRr4eoMSBfjEcs CBBE SE Bodyslide files: DD_DCL_New_CBBE: https://mega.nz/#!vZYigKIK!UiVKq-ajRGvkssSLiuLhK8mPa7gqpn4-GmZvPDWMDk8 DCL 8.3 [link updated to point to the fomod instead of my personal install] https://drive.google.com/file/d/1hoDRTh5zVyTEddr8Kum-ewE-4UBgFp05/view?usp=sharing DCL HDT and scripts https://drive.google.com/file/d/1vtzSuRKbvL0l-WjBT5nWFDqzjKHqVUwC/view?usp=sharing DCL facegen files (for the dead imperials in the Chloe quest) https://drive.google.com/file/d/18xHGY1S0BNKe1RE4ji47xqUESsBmFEmU/view?usp=sharing DD HDT https://drive.google.com/file/d/1IrRCPoGVRLRQFJYJyVT2VvbisEoFHbdh/view?usp=sharing ZAZ HDT https://drive.google.com/file/d/1prYuwDJcaIdQqcB04Yax46Un926GiIEV/view?usp=sharing ZAZ Bodyslide breastropeextreme fix (not required, just gets rid of an error during batch builds) https://drive.google.com/file/d/1shaDnP8w6Z2SQ4KmPa4Xtn-hlJIbiU7c/view?usp=sharing If you prefer, or if you don't have HDT SMP, use DD hotfix instead of the DCL HDT, DD HDT, ZAZ HDT. You'll still need the scripts from DCL HDT and scripts. I think these are all the latest links we have for everything so far. Going to cross post this in DD SE too. 7 Link to comment
zarantha Posted July 7, 2019 Share Posted July 7, 2019 10 hours ago, howlerleech said: I get what you're saying, it's just that there is a preset i can actually use for them. It's from nexus' Rosa follower and it's a slightly adjusted curvy preset that i can use for every other armor too. if i'm understanding you right - bodyslide builds for your character's preset. if you use a different preset for a follower and for your female character there's not much you can do, unless you want it to look 'off' when you're wearing the stuff. if you play a male, then set bodyslide to that follower's preset, but be aware that if your female NPCs aren't using the same preset, things won't match up for everyone else. you can't use two different presets in bodyslide, you must choose one. Link to comment
Arcelias Posted July 7, 2019 Share Posted July 7, 2019 1 hour ago, zarantha said: vortex probably isn't loading it correctly if you haven't resolved the conflicts. DDx and DCL are made by the same people, so it shouldn't matter which overwrites - I usually have DCL overwrite DDx. For FNIS, your FNIS data should overwrite FNIS, that's the updated files from when FNIS runs. you can also try installing the latest files, but you need to start a new game if you do the upgrade. DDa3.0SE: https://mega.nz/#!SFJTRbwY!eBqmEUCWkiEiwv8uscb_QabNcd44Xkc5opCG3gu-7b0 DDi4.2SE: https://mega.nz/#!rJBSzY7Z!wUMb9-0N__WAVH_0uIZwApMXmeimmHJdwsnFe_2SOkI DDx4.2SE: https://mega.nz/#!qJhV1YbQ!XaLB261Wpka0xn2jDqAqypc9dzlcvcI18d7_3dhn9EQ DDi dll (skyrim 1.5.73 skse64 2.0.15): https://mega.nz/#!uRhFVQLA!g3DS1YDCJ0yjq1GBxSp4t480_KeXct7mFwAlbVQIMXo DDi dll (skyrim 1.5.8.0 skse64 2.0.1.6): https://mega.nz/#!NbQXBa4I!2VI0bWOmfsEhEsgTfoVNOzRMhmYgMp4vDXg-VKJMwec DD Hotfix: https://mega.nz/#!SRJmRagK!tj91HO0PWKoW0KocrfKkI3IZQPxTzvRr4eoMSBfjEcs CBBE SE Bodyslide files: DD_DCL_New_CBBE: https://mega.nz/#!vZYigKIK!UiVKq-ajRGvkssSLiuLhK8mPa7gqpn4-GmZvPDWMDk8 DCL 8.3 [link updated to point to the fomod instead of my personal install] https://drive.google.com/file/d/1hoDRTh5zVyTEddr8Kum-ewE-4UBgFp05/view?usp=sharing DCL HDT and scripts https://drive.google.com/file/d/1vtzSuRKbvL0l-WjBT5nWFDqzjKHqVUwC/view?usp=sharing DCL facegen files (for the dead imperials in the Chloe quest) https://drive.google.com/file/d/18xHGY1S0BNKe1RE4ji47xqUESsBmFEmU/view?usp=sharing DD HDT https://drive.google.com/file/d/1IrRCPoGVRLRQFJYJyVT2VvbisEoFHbdh/view?usp=sharing ZAZ HDT https://drive.google.com/file/d/1prYuwDJcaIdQqcB04Yax46Un926GiIEV/view?usp=sharing ZAZ Bodyslide breastropeextreme fix (not required, just gets rid of an error during batch builds) https://drive.google.com/file/d/1shaDnP8w6Z2SQ4KmPa4Xtn-hlJIbiU7c/view?usp=sharing If you prefer, or if you don't have HDT SMP, use DD hotfix instead of the DCL HDT, DD HDT, ZAZ HDT. You'll still need the scripts from DCL HDT and scripts. I think these are all the latest links we have for everything so far. Going to cross post this in DD SE too. Btw thx I'll do what you suggested and try to get back to you in an hour or two Btw since you've added DCL and skse64 Do I still need the original? 1 Link to comment
zarantha Posted July 7, 2019 Share Posted July 7, 2019 6 minutes ago, Arcelias said: Btw thx I'll do what you suggested and try to get back to you in an hour or two Btw since you've added DCL and skse64 Do I still need the original? you don't need the original DCL 6.4 to install DCL 8.3, or DDi and DDx 4.1 to install DDi and DDx 4.2. You do need the DDi dll that matches your current skse and game versions, the dll included with both DDi 4.1 and 4.2 are several skse/game versions out of date. just to be clear - i haven't included skse64 - where it's referenced just tells you what version that dll works on. the dll won't load unless it's on the right skse64 version. Link to comment
Arcelias Posted July 7, 2019 Share Posted July 7, 2019 1 hour ago, zarantha said: you don't need the original DCL 6.4 to install DCL 8.3, or DDi and DDx 4.1 to install DDi and DDx 4.2. You do need the DDi dll that matches your current skse and game versions, the dll included with both DDi 4.1 and 4.2 are several skse/game versions out of date. just to be clear - i haven't included skse64 - where it's referenced just tells you what version that dll works on. the dll won't load unless it's on the right skse64 version. I really only just need what you suggested above/don't need any other mods not listed? Before I proceed it says there is an error in vortex that sexlab.esm and sexlabaroused.esm is not active and its now preventing the installation of DCL. SO what version will I have to correctly add now? I also now have multiple unsolved conflicts Is there anything I'm missing? (I saved them in a separate individual folder and then transfered into vortex) Link to comment
zarantha Posted July 7, 2019 Share Posted July 7, 2019 1 hour ago, Arcelias said: I really only just need what you suggested above/don't need any other mods not listed? Before I proceed it says there is an error in vortex that sexlab.esm and sexlabaroused.esm is not active and its now preventing the installation of DCL. SO what version will I have to correctly add now? I also now have multiple unsolved conflicts Is there anything I'm missing? (I saved them in a separate individual folder and then transfered into vortex) You need the requirements for those mods, and the requirements for the requirements. This is normal when installing mods, so you will want to get in the habit of reading the mod pages for mods you install. If there are requirements, the mod author will list them. They usually only list the direct requirements, it's up to you to go to those requirements to see if anything else is required to install those requirements. For SexLab, you need the version that matches your skse64 version. If you launch the game, what version do you have? Your game and skse version will be in the corner of the menu. if skse is not running correctly, then you will just have the game version. You can also get the skse version if you hit the ~ key to bring up the console and type getskseversion, this will print just the running skse version. DD requirements: https://www.loverslab.com/files/file/5878-devious-devices-se-beta/ SKSE64 http://skse.silverlock.org/ SexLab SE 1.63+ https://www.loverslab.com/topic/91861-sexlab-framework-se-163-beta-7-june-17th-2019/ SexLab Aroused Redux SE https://www.loverslab.com/files/file/5482-sexlab-aroused-redux-sse-version-29/ FNIS SE https://www.nexusmods.com/skyrimspecialedition/mods/3038 Racemenu https://www.nexusmods.com/skyrimspecialedition/mods/19080 XP32 Maximum Skeleton Extended https://www.nexusmods.com/skyrimspecialedition/mods/1988 Bodyslide and Outfit Studio https://www.nexusmods.com/skyrimspecialedition/mods/201 DCL requirements https://www.loverslab.com/files/file/5924-deviously-cursed-loot-se-beta-2/ REQUIRED MODS SexLab/SexLab Aroused Redux SE (link in DD requirements) ZaZ Animations Version 7 SE: https://www.loverslab.com/topic/100381-zaz-animation-packs-for-se/ Devious Devices SE: https://www.loverslab.com/topic/99700-devious-devices-se-beta/ Bodyslide and Outfit Studio (link in DD requirements) SexLab requirements: Requirements: Skyrim SE 1.5.80 SKSE SE v2.0.16 SkyUI SE XP32 Maximum Skeleton Special Extended - XPMSSE requirements Fores New Idles in Skyrim SE - FNIS SE 7.2 or newer RaceMenu Zaz Requirements Fores New Idles in Skyrim SE SexLab Framework SE For the conflicts: These two - which one overwrites the other depends on what you have installed. Either one will overwrite DDi-4.2SE Devious Devices runtime 1.5.8.0 skse 2.0.1.6 Devious Devices SKSE 2.0.1.5 runtime 1.5.73 DDHOTFIX overwrites DDx-4.2SE. This is only used if you are not using HDT SMP. DDx HDT patch requires HDT SMP from the chinese site. You have to create a login and make a post before you can download them. Chrome will automatically translate the page if you let it. If you don't want to download it, use the DDHOTFIX. Gromilla also has the files linked in his signature, that goes to his mediafire page. It will be under SMP DLL Files. hdtSSEFramework http://www.9damao.net/thread-61877-1-1.html hdtSSEPhysics http://www.9damao.net/thread-61878-1-1.html DD_DCL_New_CBBE overwrites DDx-4.2SE and DDa3.0SE-Final, and DCL when you get it installed. 1 Link to comment
Arcelias Posted July 7, 2019 Share Posted July 7, 2019 43 minutes ago, zarantha said: For SexLab, you need the version that matches your skse64 version. If you launch the game, what version do you have? Your game and skse version will be in the corner of the menu. if skse is not running correctly, then you will just have the game version. You can also get the skse version if you hit the ~ key to bring up the console and type getskseversion, this will print just the running skse version. These two - which one overwrites the other depends on what you have installed. Either one will overwrite DDi-4.2SE Devious Devices runtime 1.5.8.0 skse 2.0.1.6 Devious Devices SKSE 2.0.1.5 runtime 1.5.73 DDHOTFIX overwrites DDx-4.2SE. This is only used if you are not using HDT SMP. DDx HDT patch requires HDT SMP from the chinese site. You have to create a login and make a post before you can download them. Chrome will automatically translate the page if you let it. If you don't want to download it, use the DDHOTFIX. Gromilla also has the files linked in his signature, that goes to his mediafire page. It will be under SMP DLL Files. hdtSSEFramework http://www.9damao.net/thread-61877-1-1.html hdtSSEPhysics http://www.9damao.net/thread-61878-1-1.html DD_DCL_New_CBBE overwrites DDx-4.2SE and DDa3.0SE-Final, and DCL when you get it installed. So I have the same SSE and SKSE64 as you, so is Sexlab 1.63+ the correct version? Is it bad that DDx-4.2SE, DDa3.0SE-final, and DCL 8.3 are converted by DD_DCL_New_CBBE? So is DDHOTFIX required or is it just what you use? Link to comment
unmog Posted July 7, 2019 Share Posted July 7, 2019 4 hours ago, Arcelias said: So I have the same SSE and SKSE64 as you, so is Sexlab 1.63+ the correct version? Is it bad that DDx-4.2SE, DDa3.0SE-final, and DCL 8.3 are converted by DD_DCL_New_CBBE? So is DDHOTFIX required or is it just what you use? My sexlab is 163.7 I say that because I recently updated after 163.6 when my skyrim updated on me. It isn't bad if CBBE overwrites anything, but without knowing how new the CBBE is I don't know which one is really the newest. DDHOTFIX isnt a requirement, tho if you're having any problem it doesnt hurt to have. I forget exactly what it does, but I think it was for people who had issues with characters not opening their mouth when you had a gag on. Hotfixes by their nature are meant to fix a problem after the most recent update. So, if you're not having a problem dont worry about it~ if you're unsure it doesnt hurt to have however. Link to comment
Pfiffy Posted July 7, 2019 Share Posted July 7, 2019 1 hour ago, unmog said: My sexlab is 163.7 I say that because I recently updated after 163.6 when my skyrim updated on me. It isn't bad if CBBE overwrites anything, but without knowing how new the CBBE is I don't know which one is really the newest. DDHOTFIX isnt a requirement, tho if you're having any problem it doesnt hurt to have. I forget exactly what it does, but I think it was for people who had issues with characters not opening their mouth when you had a gag on. Hotfixes by their nature are meant to fix a problem after the most recent update. So, if you're not having a problem dont worry about it~ if you're unsure it doesnt hurt to have however. No. The Hotfix overwrites the broken chain models that crash the game. 1 Link to comment
zarantha Posted July 8, 2019 Share Posted July 8, 2019 19 hours ago, Arcelias said: So I have the same SSE and SKSE64 as you, so is Sexlab 1.63+ the correct version? Is it bad that DDx-4.2SE, DDa3.0SE-final, and DCL 8.3 are converted by DD_DCL_New_CBBE? So is DDHOTFIX required or is it just what you use? So you need sexlab beta7, make sure you get the whole mod and not the update file. You do not need the Devious Devices SKSE 2.0.1.5 runtime 1.5.73 - just uninstall it. it was the dll for the previous game version Devious Devices runtime 1.5.8.0 skse 2.0.1.6 overwrites the dll included with DDi DD_DCL_New_CBBE should be overwriting DDa, DDx, and DCL The hotfix is basically for preventing CTDs as Pfiffy said. The meshes were broken originally because it's impossible for SE to have HDT PE like LE does. If you don't have HDT SMP installed ( hdtSSEFramework and hdtSSEPhysics from the Chinese site) then you must install the hotfix. Link to comment
Starphyre Posted July 8, 2019 Share Posted July 8, 2019 On 7/6/2019 at 8:41 PM, zarantha said: If you prefer, or if you don't have HDT SMP, use DD hotfix instead of the DCL HDT, DD HDT, ZAZ HDT. You'll still need the scripts from DCL HDT and scripts To your knowledge, has the HDT SMP files been updated for the new game version? I'm trying to hold off my own update for that. (My next question is of course going to be, if so has the one user you linked to before posted the updated files? If so could you relink to them, as there's no way I'm making it through the Chinese site. It took me 3 months to figure out how to embed a pic.) Link to comment
zarantha Posted July 8, 2019 Share Posted July 8, 2019 5 hours ago, Starphyre said: To your knowledge, has the HDT SMP files been updated for the new game version? I'm trying to hold off my own update for that. (My next question is of course going to be, if so has the one user you linked to before posted the updated files? If so could you relink to them, as there's no way I'm making it through the Chinese site. It took me 3 months to figure out how to embed a pic.) It's been updated on the Chinese site. I just keep the two tabs open in Chrome so I don't have to look for it. the math question on refreshing the page is annoying tho Gromilla's files are here: https://www.mediafire.com/folder/7hbb9ti7yltvt/Skyrim_Stuff Link to comment
Starphyre Posted July 9, 2019 Share Posted July 9, 2019 thank you!! so I need the dll from the files linked to above, enb, racemenu? SkyUI? I think that's it! Link to comment
zarantha Posted July 9, 2019 Share Posted July 9, 2019 2 hours ago, Starphyre said: thank you!! so I need the dll from the files linked to above, enb, racemenu? SkyUI? I think that's it! DD, sexlab need updated dlls. sexlab you can get the full beta 7 or just the update if you already have beta 6 installed. DDi dll (skyrim 1.5.8.0 skse64 2.0.1.6): https://mega.nz/#!NbQXBa4I!2VI0bWOmfsEhEsgTfoVNOzRMhmYgMp4vDXg-VKJMwec SexLab SE 1.63+ https://www.loverslab.com/topic/91861-sexlab-framework-se-163-beta-7-june-17th-2019/ skyui doesn't have a dll and enb doesn't care about skse edit: don't forget to update fuz and mfgfix too Link to comment
TexasRaiderz Posted July 9, 2019 Share Posted July 9, 2019 On 7/6/2019 at 7:41 PM, zarantha said: vortex probably isn't loading it correctly if you haven't resolved the conflicts. DDx and DCL are made by the same people, so it shouldn't matter which overwrites - I usually have DCL overwrite DDx. For FNIS, your FNIS data should overwrite FNIS, that's the updated files from when FNIS runs. you can also try installing the latest files, but you need to start a new game if you do the upgrade. DDa3.0SE: https://mega.nz/#!SFJTRbwY!eBqmEUCWkiEiwv8uscb_QabNcd44Xkc5opCG3gu-7b0 DDi4.2SE: https://mega.nz/#!rJBSzY7Z!wUMb9-0N__WAVH_0uIZwApMXmeimmHJdwsnFe_2SOkI DDx4.2SE: https://mega.nz/#!qJhV1YbQ!XaLB261Wpka0xn2jDqAqypc9dzlcvcI18d7_3dhn9EQ DDi dll (skyrim 1.5.73 skse64 2.0.15): https://mega.nz/#!uRhFVQLA!g3DS1YDCJ0yjq1GBxSp4t480_KeXct7mFwAlbVQIMXo DDi dll (skyrim 1.5.8.0 skse64 2.0.1.6): https://mega.nz/#!NbQXBa4I!2VI0bWOmfsEhEsgTfoVNOzRMhmYgMp4vDXg-VKJMwec DD Hotfix: https://mega.nz/#!SRJmRagK!tj91HO0PWKoW0KocrfKkI3IZQPxTzvRr4eoMSBfjEcs CBBE SE Bodyslide files: DD_DCL_New_CBBE: https://mega.nz/#!vZYigKIK!UiVKq-ajRGvkssSLiuLhK8mPa7gqpn4-GmZvPDWMDk8 DCL 8.3 [link updated to point to the fomod instead of my personal install] https://drive.google.com/file/d/1hoDRTh5zVyTEddr8Kum-ewE-4UBgFp05/view?usp=sharing DCL HDT and scripts https://drive.google.com/file/d/1vtzSuRKbvL0l-WjBT5nWFDqzjKHqVUwC/view?usp=sharing DCL facegen files (for the dead imperials in the Chloe quest) https://drive.google.com/file/d/18xHGY1S0BNKe1RE4ji47xqUESsBmFEmU/view?usp=sharing DD HDT https://drive.google.com/file/d/1IrRCPoGVRLRQFJYJyVT2VvbisEoFHbdh/view?usp=sharing ZAZ HDT https://drive.google.com/file/d/1prYuwDJcaIdQqcB04Yax46Un926GiIEV/view?usp=sharing ZAZ Bodyslide breastropeextreme fix (not required, just gets rid of an error during batch builds) https://drive.google.com/file/d/1shaDnP8w6Z2SQ4KmPa4Xtn-hlJIbiU7c/view?usp=sharing If you prefer, or if you don't have HDT SMP, use DD hotfix instead of the DCL HDT, DD HDT, ZAZ HDT. You'll still need the scripts from DCL HDT and scripts. I think these are all the latest links we have for everything so far. Going to cross post this in DD SE too. Hello, Do you happen to have a fixed version of DCL 8.3 on your personal install? Or perhaps a solution to my problem: This one crashes the mod for me when I click anything in the 'Rape' MCM menu. Note: Just crashes the mod, not the game. Saving and reloading does not fix it, but going to a previous save (before I clicked anything) does. Thanks. Edit: Also the debug tab. Link to comment
unmog Posted July 9, 2019 Share Posted July 9, 2019 1 hour ago, TexasRaiderz said: Hello, Do you happen to have a fixed version of DCL 8.3 on your personal install? Or perhaps a solution to my problem: This one crashes the mod for me when I click anything in the 'Rape' MCM menu. Note: Just crashes the mod, not the game. Saving and reloading does not fix it, but going to a previous save (before I clicked anything) does. Thanks. Edit: Also the debug tab. Yea, here's a link to Zara's previous post for CL 8.3 Link to comment
zarantha Posted July 9, 2019 Share Posted July 9, 2019 2 hours ago, TexasRaiderz said: Hello, Do you happen to have a fixed version of DCL 8.3 on your personal install? Or perhaps a solution to my problem: This one crashes the mod for me when I click anything in the 'Rape' MCM menu. Note: Just crashes the mod, not the game. Saving and reloading does not fix it, but going to a previous save (before I clicked anything) does. Thanks. Edit: Also the debug tab. The one in the post you quoted is the one that I used for my install, I just made sure to convert everything before installing instead of after like I usually do. Nothing in the conversion process touches the MCM. I removed the link that was just my install with my choices, to prevent confusion. Apparently not everyone wanted CBBE or the LAL start. Sounds like something is corrupted your install or in your save. Do you see the same behavior with a new game? I'd make a clean save if you want to try to save that one Load the game, save, exit and then uninstall DCL Go back into the game with the mod uninstalled and just do stuff for about 15 to 30 minutes, then save and exit again Clean your save with fallrim tools/resaver to be sure any leftover DCL scripts are gone. Load the game again, give it a few minutes, then save and exit again. Reinstall DCL load the game, and see if you can configure the mcm. To be sure you've got a clean version, do not import your previous settings from an export. Take screenshots is you're not sure of your config and want to set it up the same way again. Edit Found the other person with this issue in LE. I remember now. Seems to be new if it is a bug, but I still lean towards corruption of some kind. 8.3 has been out long enough that i'd expect more than a couple of posts if it was a bug. Link to comment
unmog Posted July 9, 2019 Share Posted July 9, 2019 Hmm, I like having the LAL start option and I use CBBE so I guess I didn't see the problem~ ? Also, I've tried using fallrim tools before but I have no real idea what to do with it, is there a simple list of instructions or something for how to use the tools themselves? I only tried using it once and I was like "Uh... nope~" Is it simpler than it looks? Instead of worrying about cleaning my save I ended up just restarting tho, figured that was easier~ I remember using a different save cleaner before with Skyrim LE that was much simpler, click a button and it cleans it. Guessing most of them are outdated now tho. Link to comment
zarantha Posted July 9, 2019 Share Posted July 9, 2019 52 minutes ago, unmog said: Also, I've tried using fallrim tools before but I have no real idea what to do with it, is there a simple list of instructions or something for how to use the tools themselves? I only tried using it once and I was like "Uh... nope~" Is it simpler than it looks? Instead of worrying about cleaning my save I ended up just restarting tho, figured that was easier~ It's usually easier for me to restart - mostly because I've removed something I shouldn't have and corrupted the save. When I do use it, I either clean the exact reference recommended by the mod author (Legacy of the Dragonborn does this for upgrades a lot) or I just clean the unattached and undefined stuff. There's more you can do with it, but those are generally safe to do, and that's all the front page of fallrim tools tells you to do. Instructions See the Videos section for more detailed instructions.Getting started: Unzip the FallrimTools archive somewhere. Double-click on ReSaver.exe. Choose your savegame. You should see a tree structure that has all of the save's script elements. The #1 thing that most people need is to remove script instances that are not attached to anything. Go to the "Clean" menu and select "Show Unattached Instances". This will filter the list and show only the script instances that aren't attached to anything. Go to the "Clean" menu and select "Remove Unattached Instances". Save to a new file. Load your savegame in Skyrim/Fallout and make sure it's working properly. Link to comment
sfdrake Posted July 9, 2019 Share Posted July 9, 2019 issue with getting caught for jail and what not. every time I get arrested I get walk of shame or something like it and dont get sent to jail anymore. furthermore it even does this when the mod is entirely shut down. going to switch it to use vanilla prisons.... Link to comment
Dajovve Posted July 9, 2019 Share Posted July 9, 2019 I'm having an issue where NMM won't let me install DCL 8.3. It just says "An error occured during install." right when the FOMOD should pop up (after unpacking). I'm still on Skyrim 1.5.73 and therefore SexLab BETA6, could that be the why NMM won't let me install DCL 8.3? I was able to install DCL 6.4 from the main download page without problems and it's running too, just wondering what I'm missing out on so I wanted to update my DCL to a later version. If the reason for the error during install is me not updating to the latest SKSE, does anyone still have an older version of DCL? 8.2 preferably, I guess or whatever version runs with Skyrim 1.5.73 and SexLab BETA6. Thanks! Link to comment
Hermit36 Posted July 9, 2019 Share Posted July 9, 2019 I'm working on the Chloe quest. I completed the quest when I was running 1.5.73. I upgrade to 1.5.80 and when through all my mods to make sure I had all the requirements and updates. Now when I get to the bandit chest there is no note. I've tried going back to a previous save, restarted the game and reset the quest. Any ideas? On a separate note, once any person in the world reaches a high enough arousal they keep their mouths open like they want a cock in it. I assume it has something to do Sexlab Arousal or Dripping When Wet but I can't find a setting that would control it. Anyone had and fixed this? Link to comment
Dajovve Posted July 10, 2019 Share Posted July 10, 2019 On 7/7/2019 at 2:41 AM, zarantha said: vortex probably isn't loading it correctly if you haven't resolved the conflicts. DDx and DCL are made by the same people, so it shouldn't matter which overwrites - I usually have DCL overwrite DDx. For FNIS, your FNIS data should overwrite FNIS, that's the updated files from when FNIS runs. you can also try installing the latest files, but you need to start a new game if you do the upgrade. DDa3.0SE: https://mega.nz/#!SFJTRbwY!eBqmEUCWkiEiwv8uscb_QabNcd44Xkc5opCG3gu-7b0 DDi4.2SE: https://mega.nz/#!rJBSzY7Z!wUMb9-0N__WAVH_0uIZwApMXmeimmHJdwsnFe_2SOkI DDx4.2SE: https://mega.nz/#!qJhV1YbQ!XaLB261Wpka0xn2jDqAqypc9dzlcvcI18d7_3dhn9EQ DDi dll (skyrim 1.5.73 skse64 2.0.15): https://mega.nz/#!uRhFVQLA!g3DS1YDCJ0yjq1GBxSp4t480_KeXct7mFwAlbVQIMXo DDi dll (skyrim 1.5.8.0 skse64 2.0.1.6): https://mega.nz/#!NbQXBa4I!2VI0bWOmfsEhEsgTfoVNOzRMhmYgMp4vDXg-VKJMwec DD Hotfix: https://mega.nz/#!SRJmRagK!tj91HO0PWKoW0KocrfKkI3IZQPxTzvRr4eoMSBfjEcs CBBE SE Bodyslide files: DD_DCL_New_CBBE: https://mega.nz/#!vZYigKIK!UiVKq-ajRGvkssSLiuLhK8mPa7gqpn4-GmZvPDWMDk8 DCL 8.3 [link updated to point to the fomod instead of my personal install] https://drive.google.com/file/d/1hoDRTh5zVyTEddr8Kum-ewE-4UBgFp05/view?usp=sharing DCL HDT and scripts https://drive.google.com/file/d/1vtzSuRKbvL0l-WjBT5nWFDqzjKHqVUwC/view?usp=sharing DCL facegen files (for the dead imperials in the Chloe quest) https://drive.google.com/file/d/18xHGY1S0BNKe1RE4ji47xqUESsBmFEmU/view?usp=sharing DD HDT https://drive.google.com/file/d/1IrRCPoGVRLRQFJYJyVT2VvbisEoFHbdh/view?usp=sharing ZAZ HDT https://drive.google.com/file/d/1prYuwDJcaIdQqcB04Yax46Un926GiIEV/view?usp=sharing ZAZ Bodyslide breastropeextreme fix (not required, just gets rid of an error during batch builds) https://drive.google.com/file/d/1shaDnP8w6Z2SQ4KmPa4Xtn-hlJIbiU7c/view?usp=sharing If you prefer, or if you don't have HDT SMP, use DD hotfix instead of the DCL HDT, DD HDT, ZAZ HDT. You'll still need the scripts from DCL HDT and scripts. I think these are all the latest links we have for everything so far. Going to cross post this in DD SE too. After already posting here yesterday and since then updating to skyrim SE 1.5.80, I am still unable to install the DCL 8.3 version you linked in the quoted post. Is there maybe a chance that the version you've uploaded is broken? Do you happen to have a different link? Whenever NMM tries to open the FOMOD it just crashes the install and errors out. EDIT: manually installing DCL 8.3 worked fine and I haven't ran into any problems yet. This makes me even more certain that the link you posted has a broken FOMOD. At least for a slightly outdated version of NMM. Link to comment
Smyre Posted July 11, 2019 Share Posted July 11, 2019 Does Legendary version work for windows 10, as well as this mod installed? Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now