Evil's Horse Penis 2 - CBBE Beast Races and SoS Males

*PaulGreen* · April 1, 2016

Evil's Horse Penis 2 - CBBE Beast Races and SoS Males

For file called: Evils Horse Penis 2 - BeastAndMaleSupplement

This is an extension of the mod Evil's Horse Penis 2 for Females that adds support for Beast races (modified textures) and Males (humans, kitties and lizards). The female beast race textures are intended to match the modified CBBE beast textures found here: Revised Khajiit and Argonian Textures (CBBE)

Quick Usage
- Since this mod has the CBBE version of the orignal mod set as master, only the CBBE body is supported currently
- The load order is important. The one or two .esp files from this supplement must be AFTER the original mod in the load order, and also, if both .esp are present, in this order:
  SOS - ERF Horse Penis CBBE - Addon - FemaleBeastsSupplement.esp
  SOS - ERF Horse Penis CBBE - Addon - MaleSupplement.esp
- The SoS plugin requires SoS Full, not the light version
- The mod uses the FOMOD install method. Install using a mod manager and follow the prompts.
  The idea during install is, where asked, to specify what options you chose when installing the original mod. If you don't match the settings, this will probably not work !
- How and where the craftable item is used is the same
- The SoS plugin simply adds a male component. The same previous entry will now allow males.
  HOWEVER, for this change to be recognized in an already started game, you may need to clean the mod first. Instructions are below and in the FOMOD itself
[*]Removing
- Simply delete the mod from your load order (or delete the files if installed as loose files).
- If the SoS plugin was used, and you are removing both this and the original mod, no problems
- If the SoS plugin was used and you are only removing this supplement, but not the original mod, there may be problems. Save games will need to have old data cleared. Un-install both mods, load save game, wait a minute for SoS to clean the schlong, save, then re-load the orignal mod only.
[*]More Notes
- This is the first time I use FOMOD. Tell me if it fails.
- I have not actually tested all parts of this (all possible combinations of textures and mesh options). Tell me if things don't work.
- This mod modifies data from the original mod by using the original mod's .esp files as masters. This is why the .esp files from this mod must be later in the load order.
- This mod's own file named "SOS - ERF Horse Penis CBBE - Addon - MaleSupplement.esp", when actually present (you're installing the male assets), uses the other .esp fie called "SOS - ERF Horse Penis CBBE - Addon - FemaleBeastsSupplement.esp" as a master as well (for a total of up to three masters). This is because I wanted to not require SoS, but the male assets must modify the same armor addons a second time that the female texture update also modifies.
- In wanting to create options for installing this, there are actually three different versions of both the female and male .esp files depending on whether you use the craftable-only, SoS-only, or "Both" option.
  This means there is specail things to deal with if you want to make changes to this mod. Open the .7z mod file itself and read the Notes.txt file for a bit of information
- When changes are made to the global variable for gender in an SoS plugin, the change is not seen by an already started game. The mod data must be removed from the save game first, then re-loaded before the changed global is in effect.
- To keep the work in transferring the bodyslide morphs small, the male mesh needed to not change very much. It is not the most well-designed mesh for this purpose. There may be visible disconnect seams in some areas. Not so easy to fix without breaking the bodyslide morphs.
- The textures were created using a projection technique in zbrush and using transparency layers in photoshop. Not that artistic or difficult, but time consuming.
- This was alot of work, again.. more than a sane person should probably put into something like this >.> Good for you I'm nuts.
[*]

Anyone who wants to comment, point out bad practice or make this better themselves, go ahead and please do. All the permission stuff is just bureaucracy to me, so don't bother asking! Attribution is nice but not needed.
If you want to mod stuff and have questions about how I came up with numbers or something, feel free to ask.
If you want things like the Blender or ZBrush files or notes, feel free to ask
This mod, of course, makes use of assets provided by Evilreflex

Requirements

Orignal Evil's Horse Penis 2 for Females mod CBBE version. - Must be this one for now, UNP not yet works
Revised Khajiit and Argonian Textures (CBBE) - For the female beast races, this modified CBBE texture
Any SoS compatible skeleton for the Female body.
If the male assets are installed, any SoS compatible skeleton for the Male body.
CBBE Female Body - For the female schlong to look correct. Horse Schlonged females will look weird(er) without this. It is "technically" optional in that both the original and this mod will work without it, but isn't intended to be optional.
HDT physics mod (optional) - For the phyiscs to work on the craftable item
SoS Full version (optional) - For the SoS plugin to work, if the the install option to use the plugin is chosen

Cleaning the SoS Plugin mod:

Load the saved game.
Go into the SoS MCM menu, then this schlong's sub-menu.
Click clean at the top and follow the instructions. You will actually need to save the game 2x to clear out the schlong data.
Do Not actually "remove" the mods, just un-check them in your load order, or move the .esp files out of the Data folder temporarily
In general, the steps are: Click "Clean", save the game, Exit to the desktop, disable the .esp file for BOTH this mod and the orignal schlong mod, start the game, load the saved game, wait one minute, save the game again, exit to desktop
The schlong should now be cleaned from your save game.
Re-enable the .esp files for both the original mod and this supplement, start the game, load the game once again, SoS will pick up a 'New' schlong.

For file called: EvilsHorsePenis2-MaleMeshBodyslideData

Also included on the download page is the (Optional) Bodyslide files for the Male horse penis mesh included in this mod. It provides the same (applicable) morphs in bodyslide that the original mod has for the female schlong mesh. The SoS default body's high-weight and the SoS BodyBuilder's high-weight morphs are also present so that the Low<->High weight will work correctly.
I will not provide bodyslide instructions here. Far too much to list. Do remember that if you use Mod Organizer, the files created from Bodyslide will be placed directly in the Skyrim data folder, which will then be overridden by the MO files. Move the geneated .nif's from the data folder into this mod's MO data folder.

For file called: EvilsHorsePenis2-RaceMenuPlugin

Note that you must build the files in bodyslide with the "RaceMenu Morphs" box checked at the bottom right for this to work! This will not work otherwise.
That checkbox adds the .tri file and adds the appropriate string value to the built .nif files so that the morphs to work in game

This is a quickly written plugin that adds support for the Horse Penis morphs into the in-game Race Menu (only for the player's character of course). It adds a category into the RaceMenu called "ERF-HP" that controls each of the mesh morphs between -2.0 and 2.0. It should affect both the SoS plugin schlong and the equipped versions. The category always appears, even if your character doesn't equip the schlong. Quickly written means that I didn't do very much quality control. This is meant to be one of those "no warranty, supplied as is" type things. But still tell me if it doesn't work and how it doesn't work (Why it doesn't would be best, heh), I just may decline to fix if the situation is too complicated.
It copies the the structure and technique from the CBBE bodymorph mod's racemenu plugin.

For file called: malebody_1_sk

Basically, if you don't already know what this is, just ignore it for now.

I noticed while making this that the SoS subsurface texture was never updated after the underwear was 'removed'. On my game, the colors the various schlong addons use in the _sk files are not entirely match the vanilla _sk texture with the very dark underwear still present. One must actually be looking right at it and probably be OCD to see the transition, but it appears to be there..For those that know what this is, I'm going to upload a modified _sk file for the Male SoS body texture sets. In my game, this makes the slightly visible color seams around the crotch area go away by drawing a static color around the seam in the body's _sk file.
I guess this could be included in a more appropriate download at some point...

Submitter

PaulGreen
Submitted

03/31/2016
Category

Models & Textures
Requires

Things in the requirements section of the description
Special Edition Compatible

snarfies · April 1, 2016

Ah, finally, a 2.0 upgrade for males, yay!

I always set Dremora to use horsecock at 100%, max size.

*PaulGreen* · April 1, 2016

You can use bodyslide to make it even bigger and longer :3. Tell me if there are problems, not all parts of this I actually tested.

Luckris · April 1, 2016

Yes couldn't wait for the male update! Thanks!

*AnubiSs2167* · April 1, 2016

Hmm, NMM refuses to install this. I get "the element plugin has invalid child element typeDescription" error.

*PaulGreen* · April 1, 2016

Hmm, NMM refuses to install this. I get "the element plugin has invalid child element typeDescription" error.

Which series of options did you choose in the install?

*AnubiSs2167* · April 1, 2016

Im not even alowed to choose an option , its throws the error right at "preparing mod", so right at the start.

*PaulGreen* · April 1, 2016

I was just doing some internet seraches for this. I'm not experienced with fomod or nmm.

From posted problems and info, it looks like NMM is broken when dealing with fomod installers, like the parser is fragile and requires very specific ordering and such.. So the files have to be carefully crafted so NMM works. Oddly, this fomod is basically copied right from Evil's mod and from SoS' version. If both of those install without problems, I don't know why this fails. Other installers work I hope.. my MO seems to be okay.

I have to research later.

*AnubiSs2167* · April 1, 2016

Evlis horse for females installed no problem. I would just install manually but the file structure inside the zip look intimidating. There seem to be alot of options so im scared to fuck something up.

*PaulGreen* · April 1, 2016

If you unpack the .7z, go into the fomod folder, open the moduleconfig.xml file and go all the way to the bottom. Look for the scection:

</visible>

You are installing the SoS plugin to add Male support to this Schlong.Note that games in progress (saved games) with the original mod already loaded may not recognize that the schlong may now be used on Males. You can either: Manually set the schlong anyway on your character OR You can clean the schlong and re-load so it picks up the new gender setting To clean: * Load game, go to SoS MCM, select the schlong sub-menu. Click "Clean" at the top * Follow the instructions that come up. You will indeed have to do the 2x saves. Do Not actually remove the mods, just un-check them in your load order, or move the .esp files out of the Data folder temporarily * After completing the given steps, re-enable the original and this mod.

</description>

</typeDescriptor>

</plugin>

</plugins>

</group>

</optionalFileGroups>

</installStep>

Add in the lines in orange below:

</visible>

You are installing the SoS plugin to add Male support to this Schlong.Note that games in progress (saved games) with the original mod already loaded may not recognize that the schlong may now be used on Males. You can either: Manually set the schlong anyway on your character OR You can clean the schlong and re-load so it picks up the new gender setting To clean: * Load game, go to SoS MCM, select the schlong sub-menu. Click "Clean" at the top * Follow the instructions that come up. You will indeed have to do the 2x saves. Do Not actually remove the mods, just un-check them in your load order, or move the .esp files out of the Data folder temporarily * After completing the given steps, re-enable the original and this mod.

</description>

<files>

</files>

</typeDescriptor>

</plugin>

</plugins>

</group>

</optionalFileGroups>

</installStep>

Pack the folders back into a zip and try installing that. That's the only think I see quickly that might be different. Plugin tag with no files, image, or flag in it.

Almost time for sleep T-T Have to figure out later, sorry, heh.

*AnubiSs2167* · April 1, 2016

Np man , thanks for help , i will try.

edit1:

Ok so i managed to get it to install.

Imidietly noticed the seam between penis and body. Working on the nif right now. Will fix it today. Ill show you the results and if you want ill give you the modified nifs.

Im expieriencing a wierd crashes everytime i load the save after installing horse cocks. I prob played to much with installation and fucked something up.

Game crashes aroudn 30 seconds after laoding the save.

edit2:

Its the best i can do. Its not perfect as seen on screnshot 1 but seam is visable only in very sepcific closeup angles. I think its much better then it was.

http://imgur.com/a/wVIjR

Also question: What i want to achive is all male orcs having this horse penis but also my female character orc aswell. Problem is she uses UNP base body and changing to cbbe is out of a question. At the same time this mod requires cbbe version of horse cock for females. You think that if i install cbbe version so the master req are met and then replace texture and mesh files for unp version will this effect the male shlongs and couse instability?.

Luckris · April 1, 2016

I need an ESP thats not in the file. "SOS - ERF Horse Penis CBE - Addon.esp"

*PaulGreen* · April 1, 2016

The short answer is that UNP is not really supported for now. I'll look at options for UNP later.

This is generally a bad idea and anyone else reading this wekks or months later don't do this, but you could just try re-naming the UNP version of the previous mod to match the CBBE .esp names. I don't know if the game loading masters works off of file offsets or just form names.. If it works on form names, it might work, if it works off of file offsets, you'll probably get game crashes. If the CBBE and UNP versions actually have different info in the .esp files ( forget, have to look later), game will crash.

I need an ESP thats not in the file. "SOS - ERF Horse Penis CBE - Addon.esp"

This does only work with the CBBE version for now. If you have UNP version of Evil's original mod, it will not work.

If you select the "Equippable only" option in the install, it will look for "SOS - ERF Horse Penis CBBE - Equipable.esp"

If you select the "SoS PLugin only" option, it will look for "SOS - ERF Horse Penis CBBE - Addon.esp"

If you select the "Both equippable and plugin" option, it will look for both of those files.

Make sure you select the option in this mod that matches the option selected when installing Evil's original mod (for equippable , sos plugin, or both checked).

*AnubiSs2167* · April 1, 2016

I see male cocks have their own mesh and texture files, why is cbbe needed then? I assume is only diffrence in mesha and textures between unp and cbbe and male cocks use their own.

About the seams. It looks like there is some inherit problem with weighting. Default mesh does not change shape at all regarding npc weight, it means that it looks good only on weight 100 characters. Everything below has a huge seam. Could prob be fixed by increasing the base of the mesh, not the most elegant solutionn but it might work.

edit: yep , all changes to horsepenis_male_slot52_0.nif have aobsolutly no effect on the mesh ingame.

Luckris · April 2, 2016

The short answer is that UNP is not really supported for now. I'll look at options for UNP later.

This is generally a bad idea and anyone else reading this wekks or months later don't do this, but you could just try re-naming the UNP version of the previous mod to match the CBBE .esp names. I don't know if the game loading masters works off of file offsets or just form names.. If it works on form names, it might work, if it works off of file offsets, you'll probably get game crashes. If the CBBE and UNP versions actually have different info in the .esp files ( forget, have to look later), game will crash.

I need an ESP thats not in the file. "SOS - ERF Horse Penis CBE - Addon.esp"

This does only work with the CBBE version for now. If you have UNP version of Evil's original mod, it will not work.

If you select the "Equippable only" option in the install, it will look for "SOS - ERF Horse Penis CBBE - Equipable.esp"

If you select the "SoS PLugin only" option, it will look for "SOS - ERF Horse Penis CBBE - Addon.esp"

If you select the "Both equippable and plugin" option, it will look for both of those files.

Make sure you select the option in this mod that matches the option selected when installing Evil's original mod (for equippable , sos plugin, or both checked).

Ahh ok thanks. I screwed up the first part. Thanks for clearing it up.

*PaulGreen* · April 2, 2016

I see male cocks have their own mesh and texture files, why is cbbe needed then? I assume is only diffrence in mesha and textures between unp and cbbe and male cocks use their own.

About the seams. It looks like there is some inherit problem with weighting. Default mesh does not change shape at all regarding npc weight, it means that it looks good only on weight 100 characters. Everything below has a huge seam. Could prob be fixed by increasing the base of the mesh, not the most elegant solutionn but it might work.

edit: yep , all changes to horsepenis_male_slot52_0.nif have aobsolutly no effect on the mesh ingame.

I tried installing NMM to test this mod, and the installer worked right away for me.. I got no errors or anything. From information seen searching for the error, there were posts about it from 6-12 months previous.

Maybe upgrade to newer version of NMM?

The seam in your pictures shouldn't be there. It is much bigger and not in the same place than what I sometimes saw. There will probably be seams behind the testicles, between the legs when standing up. If squatting or sitting, they shouldn't be visible

What you're seeing is what I saw at one point while making this mod. Did you alter the .esp files in this mod? I wrote a little about it here: [ http://www.loverslab.com/topic/53096-evils-horse-penis-2-for-females/?p=1510733 ]. Also, make sure that the 1st person view has the same _1.nif selected, not the sosskeleton.nif file (unlike the female section in the armor addon).

Since Evilreflex already did the work of creating the UNP mesh (included in the UNP version of the original HP mod), CBBE isn't "really" needed except for two things:

Textures won't match. Shouldn't be too hard to fix.
The .esp files in this mod simply look for the named .esp from the original mod with "CBBE" in it. Just have to make 6 more copies of the .esp's that look to UNP named file instead >.>

What Khajiit and Argonian textures are usually used for UNP bodies ?

*AnubiSs2167* · April 2, 2016

My nmm is quite outdated true, but thanks to your instructions of adding stuff to xml file i managed to get it to install with no problems.

I forgot that your mod provides cocks for female beast races. That would explain why you are focred into cbbe or unp. Personally i dont care for beast races so i replaced the files for female cock with unp textures and meshes and it seems to work fine.

I didnt tinkered with esps at all , just installed basic files as intructed.

Here is another screnshot of weight 40 orc.

http://oi66.tinypic.com/5d579t.jpg

Chnaging his weight to 100 makes seams go away.

*PaulGreen* · April 2, 2016

Did you choose the "SoS plugin only" option? Do you use the SoSBodybuilder or default?

I have a version being prepared that fixes a bunch of mistakes. It might fix what you're seeing.

*AnubiSs2167* · April 3, 2016

Sos plugin only and default version.

*AnubiSs2167* · April 3, 2016

All seams are gone in ver 1.1

Thank you so much for your hard work.

Now all orcs in my game have something to compensate for their ugly mugs

OrionSigma · April 4, 2016

not showing up on player, load order right

*PaulGreen* · April 4, 2016

Just to make sure, realize that this is a supplement to the original Horse Penis mod. It will not work alone.

If equippable version, the item must be crafted (or use console to give it to yourself).

If using the SoS version, using a saved game that already had the base mod installed, and I assume you are talking about a male character, remember the notes in the description and the FOMOD installer about "clearing" the previous non-modded schlong. The game will not directly pick up the change from female-only to male&female when loading a saved game.

If it's just not showing up, I dunno. Remember that custom races cause problems. This and the original mod are set to use the vanilla races only.

April 7, 2016

Was not expecting it to be so difficult.

1. Evil's Horse Penis 2 CBBE 1.3.7z - got this installed.

2. Evils Horse Penis 2 - BeastAndMaleSupplement-Vers1.1 - tried to install this. Dealing with the folders:

11 FemaleSoS

21 MaleSoS

21.1 MaleSoSCommonAssets

30.2 MaleDefaultBodySoSAssets

50 -- MaleTextures --/50 MaleTexCommon

50 -- MaleTextures --/55 SoSSkin/55.1.1 MaleTexSoSSkin_s

50 -- MaleTextures --/55 SoSSkin/55.1.3 MaleTexSoSSkin_s-Hairy

So I've got four mods at the load order menu, namely:

and as a result just one female addon in SOS MCM menu.

*PaulGreen* · April 7, 2016

Offering choices ended up being very complicated. Each choice spawns that choice's possible range of options from every subsequent choice, so possible number of final states is large.

It is intended that this is installed using a FOMOD installer, like Nexus Mod Manager or Mod Organizer. That way, I did the confusing work of sorting out the files instead of person installing. Are you using "loose files" method to install?

If one knows enough about program code, the moduleconfig.xml can be looked at to see what each choice does in order to get the list of files to install.

Also, regard the note about saved games in the description page. The engine will not recognize change global variables for a mod already loaded from a save game. The same entry in MCM will work for males after installing, however it will not equip without complaining ( recognize "Male" as an option ) until it is cleaned and re-loaded.

The two supplement .esp files must go after the original mod files. So..

Sooner ---> Later in order:

SOS - ERF Horse Penis CBBE - Addon.esp

SOS - ERF Horse Penis CBBE - Equipable.esp

SOS - ERF Horse Penis CBBE - Addon - FemaleBeastsSupplement.esp

SOS - ERF Horse Penis CBBE - Addon - MaleSupplement.esp

If I gather your options, you want files from:

11 FemaleSoS

21 MaleSoS

21.1 MaleSoSCommonAssets

30.2 MaleDefaultBodySoSAssets

40 -- FemaleTextures -- ----> 40 FemaleTexCommon

40 -- FemaleTextures -- ----> 41.1 CBBE_s_sk

40 -- FemaleTextures -- ----> 45.2 FemaleTexSoSSkin

50 -- MaleTextures -- ----> 50 MaleTexCommon

50 -- MaleTextures -- ----> 55 SoSSkin ----> 55.1.1 MaleTexSoSSkin_s

50 -- MaleTextures -- ----> 55 SoSSkin ----> 55.1.3 MaleTexSoSSkin_s-Hairy

50 -- MaleTextures -- ----> 55 SoSSkin ----> 55.2.1 MaleTexSoSSkin

50 -- MaleTextures -- ----> 55 SoSSkin ----> 55.2.3 MaleTexSoSSkin-Hairy

Chosen Clue · April 7, 2016

I was wondering if there is a male standalone version of this mod planned. I use unp and the all in one hdt pussy pack and don't really plan on having futa and don't want to replace my current female models.

Not really requesting it, i just want to know if it were planned or possible. And thank you for the hard work getting it on males!

Sign In

Evil's Horse Penis 2 - CBBE Beast Races and SoS Males

Recommended Posts

Guest

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members