Paradise Halls - Home Sweet Home

CliftonJD · March 12, 2016

my experience has been to put pahe the very last and the others don't matter so long as they're loaded after original pah which should be with those mods at the end of any others.

others have tried putting home sweet home last and find bugs in their game that I can't reproduce with pahe last, even have vampires in my home in solitude training each other thru home sweet home without bugs

sidfu · March 12, 2016

well loot puts homesweethome up around 100 before the others thou. ill try that load order at bottom for now and see what happens. in my expernced putting at bottom would be best so when u enslave say a npc from a mod it should override the mods ai for sure.

CliftonJD · March 12, 2016

ya but loot also makes the mistake of putting pah way up near the top, which if you were to fix that near pahe where it should be that would put home sweet home loaded before pah, which wouldn't be good either so ya ignore loot with anything pah related

Strec · March 12, 2016

Any news on the new camp tokens? I'm starting a new game with my new graphical installation

*Musje* · March 13, 2016

Coming soon I have the temporary camp working as well as the indoor cells and the upgrade that gives indoor cells 6 slots. Last piece to add is the permanent outdoor camps, and some testing

Go ahead and start your game though, you can safely upgrade during a playthrough

jimmywon34 · March 13, 2016

Yea I really don't know what i'm doing wrong i've read those suggestions through many times on many forums. had this problem for months,ever since i started modding skyrim, and tried quite a bit in that time. the only thing i can say at this point is that my system is too weak, even though it's a high end pc, and wasted a lot of money on a 6gb card or skyrim is too weak, because like i said in town is the probably the worse and it gets exacerbated for example when i add a town overhaul(which adds stuff of course and a few npc's), enb and textures or around a lot of npc's in that town, so it's struggling with too much everything on screen. but like i said it's also struggling sometimese running out in the wild and entering a new cell. may just have to live with it.

CliftonJD · March 13, 2016

I think somewhere in that article I read something about stable ugrids that'll help with your outdoor struggles, but your town issues really are too much overhead

you can try disabling the cloak from xpmse, but in the end I think you might need to cut down the additions to the towns

you have a great card in a good pc, but skyrim isn't tech enough for the tech you put in

seen it all over skyrim is only something like 24bit, which is actually less than 32bit

max memory on a 32bit system is 4gig

I think skyrim default is 2gig and the skse memory settings allow an extra gig of memory for those tasks

meaning the 16gig of ram and 6gig of vidram is only partly going to skyrim, the rest is windows or other stuff, with nothing else running that allows for longer run times, but with that 3gig limitation in skyrim it can still only load so much at a time and still stay fast

maybe live with what you have for now, cut down some of the town addons until you're ready to upgrade your hard drive to an ssd for faster area loading and autosaves

your best performance improvement to what you already have will come from the ssd, but eventually if you want it even faster yet you might still get more from an i7

**tip - loading areas use the hard drive, ssd is faster than a hard disk drive

jimmywon34 · March 13, 2016

Yea i'll give the cloak thing a shot, you use qasmoke console command, then disable it, then move back to a town and enable it again?

I have skyrim on an ssd, but on that link you send me sacremas says he doesn't recommend stable ugrids anymore and that it's on the danger mods list now or something of that nature. I thought that using ENB also jumps the memory up to 4GB that skyrim can use too?

As far as an i7 i've thought about the new skylake but the thing is with my i5 4690k, it was at 3.5hz before i overclocked it to 4.3hz, didn't solve this issue though and performance problems in skyrim or even lessen it, also overclocking the 980ti doesn't help either. so after buying a $700.00 card for this game and it still performing like this i'm not really thinking about throwing another $400 at it anymore.

CliftonJD · March 13, 2016

you can disable the cloak from coc qasmoke

when you're ready to enable it again you'll need to return to the same "coc qasmoke"

no, i'm glad you've already tried overclocking it, cause I already knew there wouldn't be much improvement from the processor once you already had an i5, thought some, but not much

as for the $700 vid card, i'd say you might be better to sell it if you can and buy 1 of these:

http://www.amazon.com/ZOTAC-GeForce-DisplayPort-Graphics-ZT-90308-10M/dp/B00UJ7335I/ref=sr_1_4?ie=UTF8&qid=1457840690&sr=8-4&keywords=nvidia+960+4gb

not so sure on enb's, as far as I knew they only help with graphics, but that's where things get sketchy, if the enb's were helping on that you'd be flying like a raped ape...

Strec · March 13, 2016

Will you integrate the proposal to have 'whipping by trainers' optional?

jimmywon34 · March 13, 2016

Ok thanks, so should i coc qasmoke(get teleported to that place) then disable it, then go back to town and play for a bit before using coc qasmoke again and re-enabling it, or can i do it in one shot, like for example use coc qasmoke, disable it, exit the menu, and then while i'm still there go back in the mcm and re-enable it? what does that option do btw? i've seen it but never understood what it was for.

Yea I actually been thinking about that i have a gtx 970 too but i read they only use 3.5gb before starting to slow down and i get almost the same exact performance in skyrim using that so i'm trying to decide which to sell because I also am going to play witcher 3 again(probably a few more times at least) and haven't tested the 970 with witcher 3 yet but i know it's a pretty demanding game and i've heard people say even a 970 can't keep a steady 60fps on it.

*Musje* · March 13, 2016

Must have missed the request to disable whipping Easy enough to put in.

Damoriva · March 14, 2016

I just had a thought about my earlier problem ('make yourself useful' not working). Does that command look for things to do throughout the whole cell the token was placed at, or only things in a small radius around the token?

I have a camp token in Lakeview Manor at the back of the house, where I'd built the trophy room but kept it empty to turn into a slave room. I also built the kitchen, but my 'main' slave (Camilla Valerius at 70+ submission) just stands around in the slave room when I tell her to make herself useful. I can get the other commands to work, like training another slave, but she won't do housework or the 'new slave' escort thing.

Oh yes, another question: Will slaves that have been sent to their 'cell' bother to go to sleep if there are bedrolls or whatever nearby?

CliftonJD · March 14, 2016

yes, there's a bedroll in the whiterun cell they will sleep in, but i'm guessing the bedroll has to be in the cell not nearby

CliftonJD · March 14, 2016

in addition to that I remembered some other things you could consider at some point later as you can afford it:

1) you may have overclocked your i5 for more speed, but an i7 can process more threads than an i5 and there are also 6 core cpu's you could look into as well - I still won't guarantee that'll help, but it's a thought anyway...

2)look up or remind yourself the specs of your ssd: some are slower than others aside from age, at the time I bought mine last year there were some that reached over 550mb per second

3)more ram might still help it some if the following proves to be true for you as well :

in the mean time, what i'd recommend is to try is increasing your virtual memory from windows, I think it defaults to something less than what it recommends and I like to multitask enough without rebooting the pc very often so I've adjusted past the recommended values to about 30gig-so far that seems to be the highest I can put it that i'll still feel the benefits of it.

seems the more ram you have the bigger you can make that, but it still peaks out after so much until you get more ram again

jimmywon34 · March 15, 2016

not sure how to increase VRam in windows, i know how to check it, i also know how to change it in enblocal.ini is that what you mean?

also my load order looks like this

Paradisehalls.esm

farangarstudy.esp

sexsalvesforvanillabanditcamps.esp

PAHhomesweethome.esp

Slextension.esp

SLextensionfight.esp

paradisehallsfellglowslavecamp.esp

reason i have the fellglowslaves camp under the sl extension is because i noticed some facegen data from 'Fellglow Slave Camp Rebuild v1.4.2' needed to overwrite from 'paradise halls Sexlab extension repack h_rc0.5' otherwise i was getting bad neck seams on the people in the camp. know anything about that?

and does that load order look good?

CliftonJD · March 15, 2016

the following update addresses the above listed issue

jimmywon34 · March 15, 2016

is that one not suppose to have the slextensionfight esp?

and just to be the neck seams are fixed now it loads after 'Fellglow Slave Camp Rebuild v1.4.2'? because i also see they both have the same fellglowslavecamp esp now too.

CliftonJD · March 15, 2016

read the spoiler for felglow camp info, that's included with this now so that any meshes that need to be overwritten by einar can do so without losing the scripts provided by bla

the fight patch is eliminated and written into pahe thru blabla's latest update

*Musje* · March 15, 2016

Try giving them another command like wait here or keep me company, then tell them to make themselves useful. They sometimes get stuck in between states. Also, sand boxing is a bit iffy sometimes. Normally they will sandbox around most of the house, sleep, sweep the floor and so on.

I'll have to check if there is a specific problem with camp sandboxing, but the ones I kept outdoors were using the tanning rack in the camp.

If they are told to wait in the cell, they will use a bed there to sleep if there is one.

CliftonJD · March 15, 2016

the tanning rack in camps I can relate to follower idles, those might have a higher priority idle than anything else in a camp and since bandits rarely if ever use bedrolls, you might have a hard time setting that up

Damoriva · March 15, 2016

I tried that. Even tried telling them to follow me, took them to the middle of the house where there were plenty of sandbox items, but 'make yourself useful' sent them right back to the cell.

*Musje* · March 16, 2016

Hmm it might have to do with the house marker. The slaves will sandbox around that. In tbe town houses this marker is places in the living area of the house, but in portable cells it is in the center of the cell

Strec · March 16, 2016

You can't attach the packages to a cell better than to a marker? Else :

- If the center of the cell is out of the moded part of the cell it will cause problems

- If there are many stages it may cause teleports or other problems

sidfu · March 16, 2016

why not just have zaz as a requiment and some way to place the funiture with a animation tag for slaves. it would be similar to how milk mod has zaz pumps placed in cities but only u can use them or someone u tell to.

Sign In

Paradise Halls - Home Sweet Home

Recommended Posts

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Important Information