Trykz Posted March 23, 2014 Posted March 23, 2014 Between the dozens of projects I usually have going, I like to take breaks now and then to work on something I don't typically mess with too much. This time it was BodySlide 2's Outfit Studio. So I picked my favorite armors (which have about a gazillion parts mind you ) and went with it. The physics work nicely for the breasts and butt with the HDT files I'm using. They look especially nice while riding a horse Anyway, these are what I finally find satisfactory enough to share: Fiona Valkyrie Armor complete with crafting and temper recipes: I opted to use the boots from Vitrik's Doomed Valkyrie conversion, as the original boots had quite an odd way of pointing together and overlapping badly. Included are all the appropriate BodySlide files, already set up to merge with your BodySlide folder. It took me a bit to sort out the directory structure for everything, but simply merging it into your Skyrim Data folder should put everything where it needs to be. Here's the file: Fiona Valkyrie Armor.rar ------------------------------------------------------------------------- Elysium Armor Set This one was actually easier than I thought. I had to replace the hand mesh on the gloves, because the fingers of the original were horribly deformed, even at idle without any pose mod in play. It includes the full 4 piece set, with a set of heels added for variety. I didn't alter the ESP for this in any way. I do know that it does in fact have recipes for crafting and tempering. Here's the file: Elysium Armor.rar ------------------------------------------------------------------------------- Al3d Hot Dress Available in 4 colors, this is only the dress and earrings. I removed the boots from the ESP as they were created before any HDT system was available, and looked pretty bad. I highly recommend using Bob's Platform Boots with these, cause they look simply awesome together There appears to be some alternative textures in the texture folder for these, for those of you who might like to experiment. Al3dHotDress.rar ----------------------------------------------------------------------- Nova Armor Set This "was" a "one piece" armor. So I split off the gloves, boots, and goggles from the torso, and made them separate pieces. It looks and works pretty well, but has some minor annoyances I couldn't figure out. The tubes from the back of the torso to the right glove broke apart after converting the torso to BodySlide. It looks normal in BodySlide, but in game it's broken. There is also a little clipping on the back of the boot knee when sneaking. The mesh started to split apart in OS, so I stopped where it seemed to look best. Nova Armor.rar --------------------------------------------------------------------------------- Malo Clothing Set For the aspiring mage, or something....... else I added the hood, but removed the hair from it for aesthetic reasons (it looked like hell LOL), making it a full 4 piece clothing set. Malo Set.rar ----------------------------------------------------------------- I figured I'd do something constructive while taking a break from working on the Atmora world and Amazon race mods, so I made this: Tsun Armor Mix Here, you see it fitted to the Apollo body. However, the packed file contains the base CBBE body. It's a combination of the Tsun, Wolf, Shredded Triss, and Mak armors I threw together in NifSkope, then converted to BodySlide in Outfit Studio. It will eventually be the default armor set for all my Amazon race NPCs in Atmora. Here's the file: Tsun Armor Mix.rar ------------------------------------------------------------ Got kinda tired of looking at some of my vanilla armor replacers, which were still looking a bit too vanilla. So I decided to make some new ones Daedric Coil Embrace Peek-a-boo Dragonscale Wondering why it's called that? LOL Dragonbone Here's the file: CoilEmbrace & Peek-a-boo Dragonscale & Dragonbone.rar Here's a fix for the Coil Embrace skirt problem. CoilEmbraceFix.rar -------------------------------------------------------------------------- Frost Queen's Attire So here's something a little different: I always liked the Ice armor someone made eons ago, but could never find it for any version of BodySlide. So, I decided to make my own, and add my own touches to it. In total, this mod consists of 7 (yes, Seven) individual items...... The armor set itself (light armor, craftable under glass). Armor (HDT, and fully BodySlide capable), Gloves, Crown, and Heels (requires hdtHighHeels). a shield a dagger and......... a new spell that summons this guy to help you out Yep, your very own Frost Wraith You can find the spell to summon him leaning against the Mage Stone (at the Guardian Stones between Helgen and Riverwood). The character body you see here is the same one I released with my Frost Elves race mod. So this armor goes onto them without any alterations at all. For other shapes, the BodySlide file ARE included, and will automatically be added to your BodySlide folder (assuming BodySlide is in it's default location). This mod is packed into a BSA, but creating a new BodySlide shape will automatically add the new body meshes to the proper folder. So without further delay, here's the file: Frost Queen Armor Set.7z -------------------------------------------------------------------------------------- I'll add more sets as I have time to work on them. Enjoy! Trykz
jap2015 Posted March 23, 2014 Posted March 23, 2014 Thanks for sharing Trykz, can't wait to try it out
Trykz Posted March 23, 2014 Author Posted March 23, 2014 Thanks for sharing Trykz, can't wait to try it out You're quite welcome...... working on Vitrik's Elysium conversion now The gloves, sandals, and heels need more work than anything. The armor itself was easy. Trykz
Trykz Posted March 24, 2014 Author Posted March 24, 2014 Currently working on the Bad Medicine set. The heels are being a real pain though. After converting them in OS, the lower part of the heel mesh goes missing. I suspect it's because this was initially converted for CHSBHC. Anyway, heres where I'm at so far: But alas, the hour draws near, and I have work at 5am Trykz
redlantern Posted March 25, 2014 Posted March 25, 2014 would you happen to know what enb setting would cause the elysium outfit to be extremely bright in sunlight? assuming its enb great stuff tho
Redflyingmonkey Posted March 25, 2014 Posted March 25, 2014 I had the same issus with some armors redlantern; fixed it by setting "bFloatpointrenderertarget" to =0 in SkyrimPrefs.ini. I really dont know what is causing this though ...
Trykz Posted March 25, 2014 Author Posted March 25, 2014 would you happen to know what enb setting would cause the elysium outfit to be extremely bright in sunlight? assuming its enb great stuff tho I think it's likely something to do with the specularity. Might be fixable in NifSkope. I'll have a look at it when I get a chance. Currently work on Vitrik's Al3d Hot Dress conversion. Got one of the dresses finished, and starting on the next one now. The boots will be removed from the ESP, since they were made before HDT, and something causes them to break in game after conversion to BodySlide, and ending up with missing toes. Personally, I think they look better with any number of the HDT enabled boots available anyway. It shows some slight clipping when slid too high above the CBBE max weight. Other than that it's fine. Another one that looks just awesome while riding Oh, btw.... this screen was taken inside the new Atmora world mod I'll be adding my races to Trykz
Trykz Posted March 26, 2014 Author Posted March 26, 2014 Next up...... HDT BodySlide Nova Armor Set Each of the pieces you see are individual parts. Gloves, armor, boots, and the helmet is yet to come (just need to add it to the ESP). edit: Goggles added. Just need to clean up a bit of clipping on the torso and boots after work tomorrow, and reset the partitions for each piece on the BodySlide .nifs With that I'm off to bed.... Trykz
lindazana Posted March 26, 2014 Posted March 26, 2014 Beautifully done, thank you for these conversions! I've been wistfully looking at the Valkyrie set for months, knowing I would never use it due to being so out of synch with my normal bodyslide. Thank you muchly!
Trykz Posted March 27, 2014 Author Posted March 27, 2014 I decided I'd do one more set before I get back to building my races into Atmora tomorrow after work. And I wanted to make it a good one So I chose this one: Malo Clothing Set I have a bit of touch-up on the panty edges, and then just need to make recipes for each piece. Beyond that, it's basically ready to go. It's a basic clothing set with no armor value, but if enough want it as an armor, I'll mod the ESP later. Trykz
redlantern Posted March 30, 2014 Posted March 30, 2014 I had the same issus with some armors redlantern; fixed it by setting "bFloatpointrenderertarget" to =0 in SkyrimPrefs.ini. I really dont know what is causing this though ... i tried this but i guess with my enb it made the bottom half of my screen very dark, ill just have to wait for a possible fix but thanks though, it did remove the shine lol
Trykz Posted March 30, 2014 Author Posted March 30, 2014 I had the same issus with some armors redlantern; fixed it by setting "bFloatpointrenderertarget" to =0 in SkyrimPrefs.ini. I really dont know what is causing this though ... i tried this but i guess with my enb it made the bottom half of my screen very dark, ill just have to wait for a possible fix but thanks though, it did remove the shine lol I had a look in NifSkope, and it's definitely the specularity settings on the meshes. I'll make adjustments to the BodySlide meshes one night this week and re-upload it. Trykz
Lookingforaworkingusername Posted March 30, 2014 Posted March 30, 2014 i tried these but i think i am doing something wrong or probably just need to do more research. i am new to the game and my mistake has been the discovery of mods. i seem to do more reading than playing. currently i have cbbev3 body, sg textures and my current cbbe tbbp preset with xpms skeleton. i am using the current 14.28 hdt pe. no enb yet. am i supposed to be using the hdt body for this? i choose the armor from the drop down in bs2, choose my preset, create and batch build. when i go ingame the elysium top does not cover the nipples and the back of the skirt begins halfway into my butt, shoes, gloves and helm work perfrect. this is really the armor i would like to use but i get greedy so i tried them all. with valkyrie the the armor looks right but i am having the same problem with the back as elysium. my feet and hands disappear when equipping those pieces. nova looks good but the front does not look like the shape of my preset. i did install these with nmm. all the meshes, textures and esp are in the right places so i am not sure what i am doing wrong. any help would be greatly appreciated. thanks
TheGreyWolf Posted March 30, 2014 Posted March 30, 2014 Hey Trykz are you going to release that dragon plate armor from you're new apollo body pics?
Trykz Posted March 30, 2014 Author Posted March 30, 2014 Added a new Tsun mashup armor to the bottom of post #1. Enjoy! Trykz
Trykz Posted March 30, 2014 Author Posted March 30, 2014 Hey Trykz are you going to release that dragon plate armor from you're new apollo body pics? Yep Gotta work on the boots a bit first though. Trykz
Trykz Posted March 31, 2014 Author Posted March 31, 2014 Added three new replacers. Hey GreyWolf..... post #1 will be of particular interest to you Trykz
Rodlah Posted April 1, 2014 Posted April 1, 2014 I downloaded the Tsun mashup today, added it to game, & the boots are invisible, not a foot to stand on, so to speak.
Trykz Posted April 1, 2014 Author Posted April 1, 2014 I downloaded the Tsun mashup today, added it to game, & the boots are invisible, not a foot to stand on, so to speak. Sounds like a conflict. Are you running anything else that modifies the Tsun armor? Tsun armor is set as unplayable in the vanilla game. If you're already running a mod that makes it playable, just deactivate it's ESP and see if they show up. I couldn't have screenshotted them if they didn't work in game Trykz
Recommended Posts
Archived
This topic is now archived and is closed to further replies.