(SOLVED) Sexlab & Futa

[3eerKabiron]

Hello!

I have encountered a couple of problems and have been fighting for my life to determine the reasons. It could be that I am a total moron and this whole ordeal is causing me headaches or lewd mods are just meant to also fck you over IRL as well.

There are three two problems, although the main one I would like to talk about has something to do with them:

https://www.nexusmods.com/skyrimspecialedition/mods/105576

 

1) Whenever I want to use the MatchMaker spell on them it will result in this notif and console:

"failed to start scene"

"thread [0] - fatal - failed to add actor -- they are not a valid target for animation | error code -11"

I am deviously down bad for them cheeks, but I can't seem to get it to work.
I don't even have many mods to start with, as I have tried to make large mod lists just coexist with each other but they always seem to leave me out of it. It's bloody sad.

 

and also any NPC I attach a benis on with TRX Futa will refuse to initiate a scene. Just as I attach a female with one, MatchMaker results in error code -11.
I am dying for them, I am losing it. And I don't know why, but since I added the mods responsible for this, it randomly crashes when I want to use MatchMaker with a female NPC. It's not 100% but happens if I keep testing.

 

Also, when I use the spells on males it gives me,

"failed to start scene" as well.

 

Because of that, I thought that the goblins were classified as males, and SL did not allow me to perform with them. I have been relentlessly searching for the option that makes it possible to initiate scenes with the same sex but couldn't. I am straight up thinking this all falls to SL P+ and if deleting it will solve these problems (IF IT DOES NOT LET ME START A NEW GAME) I will do it. I have removed mods, and started new games, relentlessly, to the point my mod list got reduced a lot just to avoid building and fixing so many outputs & configs. I wish I was a masochist so I can deal with it.

 

Just recently fixed the Papyrus config and until now, for some reason, it doesn't want to give face so I don't have that and I am really sorry.
If you need screenshots or anything, I will gladly provide them.

 

--------------------------------------------------

 

Both of these are also posted in their respective origin forum but I thought posting it here wouldn't hurt as I might get more chances to have somebody spare their time helping me out. To be completely honest, I am not gonna be upset if these two don't work out in the end as I, one, wouldn't like to start a new game, and two, is satisfied with just having the built-in SL MatchMaker do its job as unimmersive as it might be. I am but a simple human, who yearns for the attractive constructs and adorable femboys.

 

2) "Using SL Defeat (Bane) Was trying to initiate necrophilia with a Spriggan but it resulted in

 

"error fatal failed to add actor they are not a valid target for animation error code -13"

 

There was a normal NPC nearby, and that also gave me the same error. Is there any reason why this is happening? I have SexLab framework AE v166b and SexLab framework PPLUS v2.12.0, which are both for Skyrim AE 1.6.1170, as well as the creature framework and more nasty critters. All seem to be working well other than this.

 

Edit: Alright, even when the Spriggan was knocked down, I could not perform anything. Straight up, only MatchMaker made me able to do anything.

 

"thread [0] fatal failed start thread -- cannot sort actors to the active scene"

 

I yearn for the Sprussy but it appears to be one sided.

 

3) For some reason, there is this one Falkreath female guard that speaks with subtitles but most of the time is muted. If it is a dialogue with a lot of information concerning the war, vampires, etc... she is muted. Most of the time this happens when I am passing by. If I try to talk to her, the only dialogue with voice acting is the simpler greeting.

 

She stands guard and is stationary until now. Stays on one spot talking while muted. Wanted to mention this as it might also relate to her behaviour.

 

Edit1: papyrus log. (It crashed just in the end, just as I was using the spell on a female NPC to initiate a scene, that works btw, but for some reason, (how I see it) it's like a gamble whether it decides to crash or not.) btw, it does not display that it crashed? although to be fair, I have no idea how to read these well.

 

Edit2: The second papyrus log after being able to catch spriggans and trying two actions, defeat and necrophilia which results in error.

I also realized that for some reason, I cannot use the animations of Babo & Billy that I have installed for them. They have Spriggan & Atronachs animations but I can only choose MNC animations in the available animation selections.

 

Papyrus.0 2nd.log

 

Papyrus.0.log

modlist.txt

loadorder.txt

Edited March 2, 2025 by 3eerKabiron

[3eerKabiron]

Alright, straight up, I'm gonna delete SexLab framework PPLUS and reinstall SexLab framework AE v166b, new game, and see what happens tomorrow.

[traison]

The first and second are caused by P+.

 

The third one just means you have a mod that adds dialogue without providing the fuz files for it. You can pay elevenlabs to generate good voicelines; my understanding is that they have models for practically every Skyrim voice.

 

Papyrus logs have nothing to do with crashes.

[3eerKabiron]

Quote

The first and second are caused by P+.

Ah... Of course it is. I have been lurking more in the Technical Problems forums and saw (not a lot) but a few who said ditch P+ cause they just don't work with the more niche mods. I have seen your comment of mentioning Papyrus does not have anything to do with crashes as well, haha.

 

But to clarify, it wasn't a crash where it just closes the game per se, but just completely freezes it, to where I can only hear audio of the Background music, nothing else. But for some reason, I just deducted it to be a crash.

 

I'll see what will happen to the mods once I get rid of P+.

Although because I have only learnt how to manage (or try) to manage mods via: 

I believe the normal method of loading animations with SexLab AE was,
Install Anim Packs -> Install SLAL -> Register them in-game, Check & Count
Right?

As P+ was different and registers/loads them auto via the SLSB conversion mod.

Either way, thank you so much. You helped with clearing this uncertainty fog that has been bothering me. and went as far as explaining the other two problems.

[traison]

11 hours ago, 3eerKabiron said:

Install Anim Packs -> Install SLAL -> Register them in-game

 

May need to enable them first. Don't know how SLAL works these days.

 

11 hours ago, 3eerKabiron said:

Check & Count

 

Sure, but keep in mind that FNIS animations != SL animations. The version of SLAL I have also seems very inconsistent when it comes to registering animations more than once. It may also be a bug in SL, I've never looked into it. Basically what I'm saying is, if this is still an issue in current versions then make sure you only ever register animations once per playthrough. If you absolutely have to do it more than once, then I find I get the best results when resetting the animation reigster in SL's MCM and waiting for SLAL to begin registering things again - it does it automatically.

Edited February 28, 2025 by traison

[anjenthedog]

On 2/27/2025 at 6:34 PM, 3eerKabiron said:

Ah... Of course it is. I have been lurking more in the Technical Problems forums and saw (not a lot) but a few who said ditch P+ cause they just don't work with the more niche mods. I have seen your comment of mentioning Papyrus does not have anything to do with crashes as well, haha.

 

But to clarify, it wasn't a crash where it just closes the game per se, but just completely freezes it, to where I can only hear audio of the Background music, nothing else. But for some reason, I just deducted it to be a crash.

 

I'll see what will happen to the mods once I get rid of P+.

Although because I have only learnt how to manage (or try) to manage mods via: 

I believe the normal method of loading animations with SexLab AE was,
Install Anim Packs -> Install SLAL -> Register them in-game, Check & Count
Right?

As P+ was different and registers/loads them auto via the SLSB conversion mod.

Either way, thank you so much. You helped with clearing this uncertainty fog that has been bothering me. and went as far as explaining the other two problems.

Afaik the rule is

 

1) install SLAL

2) Install animation packs

3) register animation sequences via SLAL in game.

 

So 

 

SLAL >> Anipacks >> Select and register in game

[3eerKabiron]

Bloody hell, it works. Absolutely dumbfounded. I don't even know if I should feel happy or go mad, but all in all, thank you so much, both of you, for the help. I can understand the existence of P+ as it adds the other life quality mods like Matchmaker and such while making the animation process quicker (Even when having the papyrus tweak NG). Still, I'd rather have stability and compatibility than all of that crap.