LabiaVariants 3BBB BodySlide [SMP]

[randomuser777]

LabiaVariants 3BBB BodySlide [SMP]

View File

---

A separate 3BBB version of LabiaVariants for Skyrim Special Edition. Solely compatible with 3BBB. This is primarily set up for HDT SMP but CBPC should mostly work as well.

 

 

 

ABBA open pussy support 

 

If you want an arousal based opening and closing of the labia, this requires ABBA. It is most important to use the "Closed Shape" slider to 100 if you want this function to as intended. ABBA will take this closed shape and gradually open it with arousal. It must be a closed shape.

 

After you successfully install ABBA, there will be a section in its MCM showing a slider for controlling how much it will open based your character's arousal. I have set up the slider on this end to be 0 = completely closed and no activity, whereas 100 = fully open and dripping. Make sure you test how it transitions from being completely closed to open because it will deform slightly, which is the purpose of the SmoothingABBA sliders.

 

 

Requires

 

3BBB for collision outfits & physics files, Fantasy body already included - (https://www.nexusmods.com/skyrimspecialedition/mods/30174)

CBBE for textures - (https://www.nexusmods.com/skyrimspecialedition/mods/198)

HDT SMP use the link provided here - (https://www.nexusmods.com/skyrimspecialedition/mods/29023) or search for hdtSSE

and/or

CBPC - https://www.nexusmods.com/skyrimspecialedition/mods/21224

XP32 Maximum Skeleton Special Extended - (https://www.nexusmods.com/skyrimspecialedition/mods/1988)

 

BodySlide - (https://www.nexusmods.com/skyrimspecialedition/mods/201)

TexBlend for customizing the body texture - (https://www.nexusmods.com/skyrim/mods/5737)

ABBA - (https://www.loverslab.com/files/file/6671-arousal-based-breast-adjuster-for-se-abba/) 

 

 

 

Installation

 

1. Extract the folders inside of the "BodySlide" folder directly into your BodySlide installation. Once done LabiaVariants 3BBB Fantasy should appear in the Bodyslide menus.

 

2. It should belong to the LabiaVariants SE CBBE Group. I have included some presets that can be used in the archive or you can customize. Once created copy the files into \meshes\actors\character\character assets and overwrite.

 

3. Remember to install the textures from CBBE for the full labia texture. All four parts of the texture are needed for it work properly, .dds, _msn, _s and _sk.

 

4. Once CBBE textures are installed, you must install 3BBB for the required physics config files (either HDT SMP or CBPC). The fully HDT SMP version needs "3BBB Body SMP ON Object Player or Follower" physics to work. Refer to the mod's page for more details.

 

5. If you have a custom femalebody texture then you must add the labia part of the texture to the main texture. I've added some TexBlend compatible files for this. The _sk (skin) dds from CBBE is necessary for lighting to behave more consistently.

 

6. I recommend using Oldrim (Skyrim Legendary Edition) textures for the body unless if you want to use a custom SSE texture. In this case, you will need to convert the DDS into something like a PNG for TexBlend to work with using this (https://otherbenji.gitlab.io/TexFactory/) program with Input and Output in sRGB and Generate mipmaps option selected.

 

7. Mod Organizer users: ensure the files from are not conflicted by other mods and are overwriting 3BBB meshes. If you are using BodySlide through Mod Organizer, verify your built meshes are arriving in the correct folder.

 

 

 

Credits & Thanks
Caliente, ousnius & team for BodySlide and CBBE, as well as TexBlend
BringtheNoise for Unified UNP, which is where this mesh is ported from.

Yinkle for creating Arousal Based Breast Adjuster (ABBA), allowing labia open and close on arousal

HydrogensaysHDT for HDT SMP

Groovtama for XPMSSE

Shizof for CBPC

Acro748 for allowing the use of 3BBB to create this

---

• Submitter
  randomuser777
• Submitted
  11/21/2019
• Category
  Adult Mods
• Requires
  3BBB, CBBE
• Regular Edition Compatible
  No

 

[Fetterbr]

why is there no installer to use in MO2, so difficult to remove again if its not working

[Bluegunk]

Wonderful to see this here and thank you!  I've installed it and looks great; created my own preferred preset off Nord ABBA.  Using Fair Skin, all good. ?

(I haven't tested it with anything yet).

 

Just a couple of quick questions, please.

1.  You link to the original 3BBB body mod, which has a FOMOD set up for breast size choice, and then the selection of CBP-C / SMP mix that we wish to use.

     Do we need to set the original 3BBB body up first, and overlay it with yours?  Or is yours totally stand-alone?

2.  If standalone, does that mean it is fully and only SMP?  You mention it will work with CBP-C too.

 

The only thing being if I need to set up the 3BBB original body (with choice of SMP/CBP-C mix) then other users may need to realise the body that mod generates needs to be deleted (or hidden if MO2). Otherwise we'll get a clash.

 

Thank you!

 

 

[randomuser777]

2 hours ago, Bluegunk said:

Wonderful to see this here and thank you!  I've installed it and looks great; created my own preferred preset off Nord ABBA.  Using Fair Skin, all good. ?

(I haven't tested it with anything yet).

 

Just a couple of quick questions, please.

1.  You link to the original 3BBB body mod, which has a FOMOD set up for breast size choice, and then the selection of CBP-C / SMP mix that we wish to use.

     Do we need to set the original 3BBB body up first, and overlay it with yours?  Or is yours totally stand-alone?

2.  If standalone, does that mean it is fully and only SMP?  You mention it will work with CBP-C too.

 

The only thing being if I need to set up the 3BBB original body (with choice of SMP/CBP-C mix) then other users may need to realise the body that mod generates needs to be deleted (or hidden if MO2). Otherwise we'll get a clash.

 

Thank you!

 

 

From my experience testing, just use whichever breast size you prefer. You could avoid cup sizes smaller than C if you want the breasts to touch when an animation squeezes them. I tried building the 3BBB collision outfit using the Nord ABBA preset, which worked fairly well but did not have the strongest breast collisions.

 

Oh I mentioned CBPC because 3BBB supports it as did the previous version CBBE SE. This is best experienced with HDT SMP, that is until I understand the deformation CBPC seems to cause to the Labia mesh.

 

Yes, make sure the files you want loaded are not being overwritten/conflicted by 3BBB or something else.

[Bluegunk]

Thanks! I'm being rather dumb here. 

Am I correct in understanding I should not have the 3BBB Body mod from Acro748 active in my MO2 install order?  That yours should be the only body?

(Oh, actually I see the requirements include 3BBB body...)

 

I have a touch of autism so I apologise - I need things to be crystal clear. Thank you!

[randomuser777]

1 hour ago, Bluegunk said:

Thanks! I'm being rather dumb here. 

Am I correct in understanding I should not have the 3BBB Body mod from Acro748 active in my MO2 install order?  That yours should be the only body?

(Oh, actually I see the requirements include 3BBB body...)

 

I have a touch of autism so I apologise - I need things to be crystal clear. Thank you!

3BBB is required for its physics config files and the collision outfit. The femalebody_0/_1 files provided by 3BBB should be overwritten by this.

[randomuser777]

4 hours ago, Fetterbr said:

why is there no installer to use in MO2, so difficult to remove again if its not working

If you're using Mod Organizer 2, why would that be difficult? MO2 creates separate folders?

[Bluegunk]

30 minutes ago, randomuser777 said:

3BBB is required for its physics config files and the collision outfit. The femalebody_0/_1 files provided by 3BBB should be overwritten by this.

Many thanks!   All sorted for me! Brilliant - off to enjoy your wonderful adaptation!  ? ?

[Fetterbr]

10 hours ago, randomuser777 said:

If you're using Mod Organizer 2, why would that be difficult? MO2 creates separate folders?

but i cant install with MO2, i just get the box to install manual but i cant select any folder. It says no game data on top level and i cant select any data folder to set data direktory. Sorry maybe i am just stupid but could you help me a little in details how to install with MO2 please

[Bluegunk]

8 hours ago, Fetterbr said:

but i cant install with MO2, i just get the box to install manual but i cant select any folder. It says no game data on top level and i cant select any data folder to set data direktory. Sorry maybe i am just stupid but could you help me a little in details how to install with MO2 please

Hi

 

I use MO2 and here's what I do. Download the file to a handy working spot and unpack it.  Create a folder called data. Go inside data, and create a folder called CalienteTools.

Move the mod's bodyslide folder and its contents into the CalienteTools folder so you have a final progression of data/CalienteTools/bodyslide/....   (etc).

 

Back at the data folder level, pack the whole thing up into a 7Z archive, use a name of your choice.  Then install the new archive in the normal way in MO2 using the "Install a new mod from an archive" option on the top left.  Make sure you select Manual Install in the pop-up box and right-click the data folder that you created. and choose "Set Data Folder" to tell MO2 that is the data folder. (I always install manually in MO2, it's much safer).

 

Now you don't need to fiddle manually with the Bodyslide Mod's folders!

 

Let me know if you have any issues.

 

(Apologies randomuser77, was here and saw Fetterbr needed a hand - hope you do not mind  ?).  3BBB Labia Variants working perfectly so far, thank you!

[Mertz]

40 minutes ago, Bluegunk said:

Now you don't need to fiddle manually with the Bodyslide Mod's folders!

For Wrye Bash users I made a BAIN Converter to fix the folder structure so it can be installed. This should also work for MO2 if MO2 has support for BAIN Converter Files.

 

 

. Name: LabiaVariants 3BBB BAIN v1.0-BCF.7z
. Size: 1 KB
. Remapped: 8 file(s)

. Requires: 1 file(s)
  * (B4924840) - LabiaVariants 3BBB v1.0.7z

To use:

• Put the BCF file into "Bash Installers\Bain Converters"
• Right click the original mod, select "BAIN Conversions -> Apply"
• Pick this BCF
• Confirm the name of the resulting package file. You can rename it if you'd like.
• Once the conversion finishes, find the package and install as usual.

Note: this converter contains zero assets from the original mod and requires the original mod (as of 23-Nov-2019) as it is checksum-locked to it.

 

LabiaVariants 3BBB BAIN v1.0-BCF.7z

[Bluegunk]

This body is working really well. Thank you!!

[Bluegunk]

I notice Acro is still forging ahead with updates of the 3BBB body.  

I know you brought this out extremely recently, Randomuser, but can you tell me if it is safe to update the Acro 3BBB on which this is based?

Thanks!

[xellon100]

Am I making this harder than it needs to be?

So this is what I did, I selected one of the 3 custom shapes (high elf) then just duplicated shizof's sliders on bodyslide with 3bbb selected. But I'm missing the vagina/anus from outfit stuido. So I just imported the cbbe 3bbb. Am I suppose to adjust the size and move to match the body now? But the original labia is in the way. Should I remove part of it by deleting the vertices?

Or is there a much simper way of doing this?

[lbgg2831]

感谢分享

[Bluegunk]

6 hours ago, xellon100 said:

Am I making this harder than it needs to be?

So this is what I did, I selected one of the 3 custom shapes (high elf) then just duplicated shizof's sliders on bodyslide with 3bbb selected. But I'm missing the vagina/anus from outfit stuido. So I just imported the cbbe 3bbb. Am I suppose to adjust the size and move to match the body now? But the original labia is in the way. Should I remove part of it by deleting the vertices?

Or is there a much simper way of doing this?

 

As a Mod Organizer 2 user, I downloaded Acro748's 3BBB body from Nexus ( https://www.nexusmods.com/skyrimspecialedition/mods/30174 v1.13 ) and installed it. While installing it I chose the full SMP version.  The Acro748 body is based on Shizov's body but has been further developed. It is the one you should use for this mod.

 

I then installed this Labia Variants 3BBB version so it loads after Acro 748's body.  In Bodyslide, you can then find this Labia Variants body in the Outfit/Body box (top left), choose your preset from this mod, and you should get all the sliders. You don't need to bother with the Acro748 body, it is there to supply the necessary bits for this Labia body.

 

In my case I chose the Labia Nord ABBA version and adjusted the sliders and saved them as my own preferred preset. Built the body and good to go!

 

Hope that helps!

 

PS if you prefer to use CBP-C (which I do), I found it necessary to make sure all the CBP-C collision config files in the CBP-C mod and the Acro748's Body mod are identical to each other. Then both mods are using identical configs. If you have been using CBP-C, keep backups of your preferred config files.  

 

[xellon100]

18 hours ago, Bluegunk said:

 

As a Mod Organizer 2 user, I downloaded Acro748's 3BBB body from Nexus ( https://www.nexusmods.com/skyrimspecialedition/mods/30174 v1.13 ) and installed it. While installing it I chose the full SMP version.  The Acro748 body is based on Shizov's body but has been further developed. It is the one you should use for this mod.

 

I then installed this Labia Variants 3BBB version so it loads after Acro 748's body.  In Bodyslide, you can then find this Labia Variants body in the Outfit/Body box (top left), choose your preset from this mod, and you should get all the sliders. You don't need to bother with the Acro748 body, it is there to supply the necessary bits for this Labia body.

 

In my case I chose the Labia Nord ABBA version and adjusted the sliders and saved them as my own preferred preset. Built the body and good to go!

 

Hope that helps!

 

PS if you prefer to use CBP-C (which I do), I found it necessary to make sure all the CBP-C collision config files in the CBP-C mod and the Acro748's Body mod are identical to each other. Then both mods are using identical configs. If you have been using CBP-C, keep backups of your preferred config files.  

 

Thanks a ton. You were spot on, especially with the files needing to be identical. I tested that before and after and noticed a huge improvement. I'll set up the numbers to my liking now.

[randomuser777]

On 11/27/2019 at 8:26 AM, Bluegunk said:

I notice Acro is still forging ahead with updates of the 3BBB body.  

I know you brought this out extremely recently, Randomuser, but can you tell me if it is safe to update the Acro 3BBB on which this is based?

Thanks!

What sort of changes has Acro made? I've been considering updating if they are significant enough. Currently however, I need to update my installation to SKSE 2.0.17 to fix my Racemenu morphs. They suddenly ceased functioning when I switched to this.

 

Edit: I've solved my Racemenu problems by rebuilding the mesh files. It seems I forgot to refresh the default path meshes because I also use a unique body for each race mod called UMATBR. As for is it safe to upgrade to the newer version of 3BBB? Most likely not until I update the body because that would be incompatible with changes made in the SMP ON collision outfit probably.

[randomuser777]

If anyone wants a more firm HDT config, here's one I made. 3BBB.xml

Overwrite the file of the same name in \SKSE\Plugins\hdtSkinnedMeshConfigs\

[Bluegunk]

On 12/5/2019 at 9:28 AM, randomuser777 said:

What sort of changes has Acro made? I've been considering updating if they are significant enough. Currently however, I need to update my installation to SKSE 2.0.17 to fix my Racemenu morphs. They suddenly ceased functioning when I switched to this.

 

Edit: I've solved my Racemenu problems by rebuilding the mesh files. It seems I forgot to refresh the default path meshes because I also use a unique body for each race mod called UMATBR. As for is it safe to upgrade to the newer version of 3BBB? Most likely not until I update the body because that would be incompatible with changes made in the SMP ON collision outfit probably.

OK, thank you. The version Acro is producing is called his "Amazing" body.

 

I shall wait happily, because the one I have from you is working awesomely well. It's amazing how good it is with ABBA. You are a genius!  Thank you once again!

[randomuser777]

17 hours ago, Bluegunk said:

OK, thank you. The version Acro is producing is called his "Amazing" body.

 

I shall wait happily, because the one I have from you is working awesomely well. It's amazing how good it is with ABBA. You are a genius!  Thank you once again!

Oh, someone else mentioned that in the CBBE SE thread on page 5

I appreciate your compliment but I feel I did the smallest amount of work imaginable. Caliente, ousnius, BringtheNoise and their team deserve the true credit. The body and the base labia meshes have improved immensely the past 5 years. I only made some careful edits to an existing mesh in Bodyslide, simple work in comparison.

[xx66xx]

Is it okay to use with TBD?

[randomuser777]

On 12/23/2019 at 6:41 PM, xx66xx said:

Is it okay to use with TBD?

Touched by Dibella you mean? No, I would need to change the reference body first.

[Bluegunk]

Hi

One thing I have noticed, is that in my HDTSSEPhysics.log I am getting a few lines of this:

[Thu Dec 26 19:34:32 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(118,2):Labia is not a BSTriShape or doesn't exist, skipped

 

I have no idea if that is important or not. It does not seem to prevent anything from working.

I guess it is looking for a morph Tri file to go with the labia or something?

 

 

[randomuser777]

23 hours ago, Bluegunk said:

Hi

One thing I have noticed, is that in my HDTSSEPhysics.log I am getting a few lines of this:

[Thu Dec 26 19:34:32 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(118,2):Labia is not a BSTriShape or doesn't exist, skipped

 

I have no idea if that is important or not. It does not seem to prevent anything from working.

I guess it is looking for a morph Tri file to go with the labia or something?

 

 

I'm not sure what the significance of that is, but thanks for looking out. I get something like this in my log.

[Wed Dec 25 22:31:24 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(899,2):Labia is not a BSTriShape or doesn't exist, skipped
[Wed Dec 25 22:31:24 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(924,2):VirtualGround is not a BSTriShape or doesn't exist, skipped
[Wed Dec 25 22:31:24 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(942,2):VirtualBreasts is not a BSTriShape or doesn't exist, skipped
[Wed Dec 25 22:31:24 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(957,2):VirtualArms is not a BSTriShape or doesn't exist, skipped
[Wed Dec 25 22:31:24 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(981,2):VirtualLegs is not a BSTriShape or doesn't exist, skipped
[Wed Dec 25 22:31:24 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(1002,2):VirtualHead is not a BSTriShape or doesn't exist, skipped
[Wed Dec 25 22:31:24 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(1026,2):VirtualButt is not a BSTriShape or doesn't exist, skipped
[Wed Dec 25 22:31:24 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(1051,2):VirtualVagina is not a BSTriShape or doesn't exist, skipped
[Wed Dec 25 22:31:24 2019]WARNING: SKSE\Plugins\hdtSkinnedMeshConfigs\CBBE.xml(1075,2):VirtualHands is not a BSTriShape or doesn't exist, skipped

So I've probably had this error since the beginning but also these Virtual collider shapes are exhibiting the same behaviour in the log. Whenever I build the body, I build it with morphs because I like to use Racemenu and other things, so a .tri file is provided. Perhaps this is the reason why the labia is so distorted with CBPC? It lacks the correct structure?