StableBot Posted August 31, 2018 Posted August 31, 2018 Sorry it's me again ?. I wonder if anyone experienced this graphical issue before. program for screenshots for windows I'm currently using Pure water, I try switching to W.A.T.E.R but it only change the effect on top of the water. Even if I disable both, the problem still persist.
StableBot Posted August 31, 2018 Author Posted August 31, 2018 2 hours ago, SmedleyDButler said: Uh.... what's the problem? The part underwater get too distorted maybe this will show it better Is there a way to turn it off? Make it so it doesn't distort.
GenioMaestro Posted August 31, 2018 Posted August 31, 2018 I think is a problem of ENB when render underwater. For be sure, disable your ENB pressing F12 or Shift F12 or Control F12, depending of your configuration. We have a lot of problems when want see tats in feets when they are underwater. If the problem is ENB the only solution is configure it correctly, but i'm not expert in ENB configuration. I only use ENB in boost mode. My old machine not support full ENB.
StableBot Posted August 31, 2018 Author Posted August 31, 2018 10 hours ago, GenioMaestro said: I think is a problem of ENB when render underwater. For be sure, disable your ENB pressing F12 or Shift F12 or Control F12, depending of your configuration. We have a lot of problems when want see tats in feets when they are underwater. If the problem is ENB the only solution is configure it correctly, but i'm not expert in ENB configuration. I only use ENB in boost mode. My old machine not support full ENB. I use to have Snapdragon prime before I switch over to Anko ENB. The problem persist through both enb.
Captain Cobra Posted August 31, 2018 Posted August 31, 2018 I have the same problem, even without an enb or mods that change water.
GenioMaestro Posted September 1, 2018 Posted September 1, 2018 11 hours ago, Captain Cobra said: I have the same problem, even without an enb or mods that change water. If you have this problem or similar WITHOUT ENB only can be for bad setting in the ini files. Dowload BethIni for correct your ini files.
Captain Cobra Posted September 1, 2018 Posted September 1, 2018 3 hours ago, GenioMaestro said: If you have this problem or similar WITHOUT ENB only can be for bad setting in the ini files. Dowload BethIni for correct your ini files. That fixed it, thanks fam.
StableBot Posted September 2, 2018 Author Posted September 2, 2018 On 9/1/2018 at 12:40 AM, GenioMaestro said: If you have this problem or similar WITHOUT ENB only can be for bad setting in the ini files. Dowload BethIni for correct your ini files. Damn I use ENB. I try messing around with the WATER tab in the INI, setting everything to false still give me the problem.
yatol Posted September 3, 2018 Posted September 3, 2018 7 hours ago, noobshi said: Damn I use ENB. I try messing around with the WATER tab in the INI, setting everything to false still give me the problem. those feets behind the body it's an effect that isn't on all body parts under the water because strange settings? instead of messing around randomly with those settings to get new problems, why not compare your mess to settings that work? https://www.creationkit.com/index.php?title=WaterType#Refraction Reflection Magnitude This value determines how much the normals (from the noise wave pattern texture) will affect the distortion amounts of the reflections on the water surface. At 0% you will have perfectly still reflections while at 100% you will have the full effect of distortion coming from the magnitude of the normals. Refraction Magnitude This is similar to the reflection magnitude in that it scales up/down the distortion of the refractions seen under the water.
StableBot Posted September 3, 2018 Author Posted September 3, 2018 Are you talking about this? host pictures Do you know where I need to go to change that?
GenioMaestro Posted September 3, 2018 Posted September 3, 2018 Very well seen, I did not think about that. yatol may be right. You must make that I said 3 days ago: On 8/31/2018 at 9:47 PM, noobshi said: I think is a problem of ENB when render underwater. For be sure, disable your ENB pressing F12 or Shift F12 or Control F12, depending of your configuration. If the problem disapear when disable ENB is, evidently, a problem in ENB configuration. If the problem persist when disable ENB is, evidently, a problem in a mod. If the problem appear ONLY in some waters of some mod can be a problem in how the ESP of the mod define the water properties. Ask in the forum of the mod. If the problem appear in ALL water of ALL skyrim can be a mod that change the water properties for entire skyrim. Disable mod's until locate the problem. All of this, of course, with ENB disabled.
StableBot Posted September 4, 2018 Author Posted September 4, 2018 On 9/3/2018 at 1:58 AM, GenioMaestro said: Very well seen, I did not think about that. yatol may be right. You must make that I said 3 days ago: If the problem disapear when disable ENB is, evidently, a problem in ENB configuration. If the problem persist when disable ENB is, evidently, a problem in a mod. If the problem appear ONLY in some waters of some mod can be a problem in how the ESP of the mod define the water properties. Ask in the forum of the mod. If the problem appear in ALL water of ALL skyrim can be a mod that change the water properties for entire skyrim. Disable mod's until locate the problem. All of this, of course, with ENB disabled. Have been testing without ENB and all the water mods. I still get the problem, so it's either the Refraction and Reflection (which Idk where to change) like yatol stated above, or it's a mod. Pure and W.A.T.E.R only change the look of the surface. It could be another mod that causing it, but I have a feeling that it's not.
GenioMaestro Posted September 4, 2018 Posted September 4, 2018 4 minutes ago, noobshi said: Have been testing without ENB and all the water mods. I still get the problem, so it's either the Refraction and Reflection (which Idk where to change) like yatol stated above, or it's a mod. Pure and W.A.T.E.R only change the look of the surface. It could be another mod that causing it, but I have a feeling that it's not. Same situation, same answer. On 9/1/2018 at 9:40 AM, GenioMaestro said: If you have this problem or similar WITHOUT ENB only can be for bad setting in the ini files. Dowload BethIni for correct your ini files. If you disable your ENB and remove your waters mods, teorically you are playing a vanilla skyrim, talking about water, and the solution can be the same. Open BethIni and activate Enb Mode and Recomended Tweaks. Press High and Save/exit. Test your game again and tell us the results. Of course, make test in a NEW GAME. Some problems can come from damaged or corrupted savegames. And test with diferent races, maybe you are ussing a specialiced race with specific parameters. Use vanilla races.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.