Jump to content

Ledo4ek conversion(Manga Body, Busty CBBE and UNP)


Recommended Posts

Posted

If I was the modder, I'd probably go dark with my mods after all the whining... 

 

And for people looking for instructions, just install ADEC from nexus (follow the instructions on that page), then install the body meshes here over those.

Posted

If I was the modder, I'd probably go dark with my mods after all the whining... 

 

And for people looking for instructions, just install ADEC from nexus (follow the instructions on that page), then install the body meshes here over those.

Would you happen to know the reason for the drastic drop in texture quality? This only happened after I tried to install the new body.

Posted

 

If I was the modder, I'd probably go dark with my mods after all the whining... 

 

And for people looking for instructions, just install ADEC from nexus (follow the instructions on that page), then install the body meshes here over those.

Would you happen to know the reason for the drastic drop in texture quality? This only happened after I tried to install the new body.

 

Not entirely sure I see the problem, but if you think that the body textures should be higher quality, you can still use your CBBE texture of choice, and just install the "normal map" located on the front page here. To my knowledge  this mod shouldn't influence armour texture quality, so I'd double check to be sure you don't have something else doing that.

 

On another note (not addressed to C-Gamer), I think Leo's done fine with the new body, and while it's a tad inconvenient for it to be incompatible with other CBBE armours, it's important to remember that he's doing this for free, and doesn't owe us anything. We're lucky someone like him is doing all this work for our benefit to begin with. If you enjoy the old CBBE body so much, why not ask for Leo's permission and try your hand at a few conversions yourself? That seems more reasonable than suggesting he support two bodies, one of which he won't likely use.

 

If it were an entire team of people here working on loads of armour sets, I could understand the outrage at the lack of democracy, but one man throwing up a poll with no guarantees as to what he means to do with said poll, doesn't entitle us to anything.

 

/rant

Posted

 

 

 

 

If I was the modder, I'd probably go dark with my mods after all the whining...

 

And for people looking for instructions, just install ADEC from nexus (follow the instructions on that page), then install the body meshes here over those.

Would you happen to know the reason for the drastic drop in texture quality? This only happened after I tried to install the new body.

Not entirely sure I see the problem, but if you think that the body textures should be higher quality, you can still use your CBBE texture of choice, and just install the "normal map" located on the front page here. To my knowledge this mod shouldn't influence armour texture quality, so I'd double check to be sure you don't have something else doing that.

 

On another note (not addressed to C-Gamer), I think Leo's done fine with the new body, and while it's a tad inconvenient for it to be incompatible with other CBBE armours, it's important to remember that he's doing this for free, and doesn't owe us anything. We're lucky someone like him is doing all this work for our benefit to begin with. If you enjoy the old CBBE body so much, why not ask for Leo's permission and try your hand at a few conversions yourself? That seems more reasonable than suggesting he support two bodies, one of which he won't likely use.

 

If it were an entire team of people here working on loads of armour sets, I could understand the outrage at the lack of democracy, but one man throwing up a poll with no guarantees as to what he means to do with said poll, doesn't entitle us to anything.

 

/rant

I agree. I think people are blowing this way out of proportion. And a lot of the complaints I have seen revolve around CBBE textures not working with the new body, even though, as you just said, thy work as long as you use the normalmap that ledo provides on page 1. As for me, the only downside of having a new body is having to wait a little longer for conversions. The body looks as nice as, if not better than, the old body, so Im content.

 

Also what do you mean by "incompatible with CBBE armors?"

Posted

 

Would you happen to know the reason for the drastic drop in texture quality? This only happened after I tried to install the new body.

 

 

It looks like you somehow disabled anisotropic filtering. Make sure it's at 16 or 8 in your settings. Or force it with ENB or your driver or something.

Posted

 

 

 

 

 

If I was the modder, I'd probably go dark with my mods after all the whining...

And for people looking for instructions, just install ADEC from nexus (follow the instructions on that page), then install the body meshes here over those.

Would you happen to know the reason for the drastic drop in texture quality? This only happened after I tried to install the new body.
Not entirely sure I see the problem, but if you think that the body textures should be higher quality, you can still use your CBBE texture of choice, and just install the "normal map" located on the front page here. To my knowledge this mod shouldn't influence armour texture quality, so I'd double check to be sure you don't have something else doing that.

On another note (not addressed to C-Gamer), I think Leo's done fine with the new body, and while it's a tad inconvenient for it to be incompatible with other CBBE armours, it's important to remember that he's doing this for free, and doesn't owe us anything. We're lucky someone like him is doing all this work for our benefit to begin with. If you enjoy the old CBBE body so much, why not ask for Leo's permission and try your hand at a few conversions yourself? That seems more reasonable than suggesting he support two bodies, one of which he won't likely use.

If it were an entire team of people here working on loads of armour sets, I could understand the outrage at the lack of democracy, but one man throwing up a poll with no guarantees as to what he means to do with said poll, doesn't entitle us to anything.

/rant
I agree. I think people are blowing this way out of proportion. And a lot of the complaints I have seen revolve around CBBE textures not working with the new body, even though, as you just said, thy work as long as you use the normalmap that ledo provides on page 1. As for me, the only downside of having a new body is having to wait a little longer for conversions. The body looks as nice as, if not better than, the old body, so Im content.

Also what do you mean by "incompatible with CBBE armors?"

 

 

 

 

I was speaking specifically to the texture issues. The armours still work fine, but any exposed skin (especially the ass) may look rather unnatural.

Posted

i have an issue with the Fairy Tale TBBP, when running the back of the skirt shakes weirdly and when swinging a 1handed weapon, the skin on the characters arm appears "linked" to the skirt (stretched out in a sense like a thread)

 

would you happen to know if the problem is on my end? and if it is what the cause is?

 

also the Stoneheart (not sexy one) wasnt uploaded correctly, the working link has the Rogue outfit, not Stoneheart

Posted

How do you get the weight X2/3 u see in the 1st screenshot? If I use nifskope it won't bounce anymore

Use the RaceMenu mod found on the nexus. It allows for breast size customisation.

Posted

Hi everybody i hav favor can somebody hav link to Tera Armor For Manga Part 2, 3 & 4 because they are not working :(

Posted

Why the DesertWind has no esp file? And someone have Desert Wind-TBBP for Manga body CBBE?

All the the armors only need the one esp file provided on the first page which will be updated with each release.

Posted

i have an issue with the Fairy Tale TBBP, when running the back of the skirt shakes weirdly and when swinging a 1handed weapon, the skin on the characters arm appears "linked" to the skirt (stretched out in a sense like a thread)

 

would you happen to know if the problem is on my end? and if it is what the cause is?

 

also the Stoneheart (not sexy one) wasnt uploaded correctly, the working link has the Rogue outfit, not Stoneheart

 

I can also confirm this. The non-sexy versions of the Stoneheart armor links lead to the non-sexy version of the Rogue armor.

Posted

im guessing these mods dont work anymore the page 1 mods

 

cause i downloaded every thing needed from page 1 

 

but no 1 says in what order to add the mods or what command to type to turn them on cause

not even the armor mods show up so wtf is going on ?

yea im mad cause 4 days of trying to get this mod to work & not even 1 breast got bigger 

nothing happened just a nude skinny model looking at me 

 

Posted

im guessing these mods dont work anymore the page 1 mods

 

cause i downloaded every thing needed from page 1 

 

but no 1 says in what order to add the mods or what command to type to turn them on cause

not even the armor mods show up so wtf is going on ?

yea im mad cause 4 days of trying to get this mod to work & not even 1 breast got bigger 

nothing happened just a nude skinny model looking at me 

what worked for me was using adec textures instead of cbbe. Follow the instructions here http://skyrim.nexusmods.com/mods/5390/? then install the manga body meshes over that. Also install the xpms skeleton from the first page. As for the armors, on the skyrim launcher click on data files and make sure the esp file is checked to load. Hope this helps.

Posted

 

im guessing these mods dont work anymore the page 1 mods

 

cause i downloaded every thing needed from page 1 

 

but no 1 says in what order to add the mods or what command to type to turn them on cause

not even the armor mods show up so wtf is going on ?

yea im mad cause 4 days of trying to get this mod to work & not even 1 breast got bigger 

nothing happened just a nude skinny model looking at me 

what worked for me was using adec textures instead of cbbe. Follow the instructions here http://skyrim.nexusmods.com/mods/5390/? then install the manga body meshes over that. Also install the xpms skeleton from the first page. As for the armors, on the skyrim launcher click on data files and make sure the esp file is checked to load. Hope this helps.

 

bless you your a saint, but you helping me be a sinner  :D

Posted

is it possible to convert these to UNPB BBP? 

 

It's possible to convert pretty much any armor to another body. The question is how much time and who is willing to.

You could ask at the Conversions for UNPB thread and request there also. Lots of the requests there have a good chance for future conversions.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...