Search the Community
Showing results for tags 'gpl'.
-
SexLab Aroused Creatures SE (2024-03-29) View File Allow ❤️❤️friendly❤️❤️ creatures to take advantage of your character and NPCs. Any nearby non-hostile creatures with a high enough arousal will pursue and force themselves on (or seduce) your character or any available NPC. There are lots of configuration options to customise your experience, including dialogue and hotkey invitation. Aroused Creatures is designed to provide an immersive way to enable sex with creatures outside of combat. This is intended to compliment combat-sex mods like SexLab Defeat. As such, Aroused Creatures specifically avoids engagement with hostile creatures in order to allow combat mods like this to function. SexLab Aroused Creatures SE is developed from the Legendary Edition SexLab Aroused Creatures. For an LE backport of this mod use OsmelMC Mod Tweaks. Please note that any support for patched versions of Aroused Creatures must be sought from the authors of the patches. Hard Requirements SexLab SE and all of its requirements. SexLab Aroused Redux SSE and all of its requirements. Other versions of SexLab Aroused should work. Other Requirements Fore's New Idles in Skyrim SE (FNIS SE) and FNIS Creature Pack Run Generate FNIS For Users after installing or uninstalling this mod. Nemesis will not work. Without running this, everyone will t-pose. More Nasty Critters SE, Creature Framework, and Hentai Creatures (third-party port) Creature aroused models and animations. The Hentai Creatures mod also adds spells to spawn female creatures. Fuz Ro D-oh Silent Voice Silent dialogue readability. SexLab Defeat SE (Optional) Aroused Creatures is intended to compliment the combat sex features of Defeat. Use this to allow sex with enemy creatures. If installed, this mod also provides the player struggle feedback HUD meter. The Defeat ESP does not need to be enabled if you do not want the combat features but just the struggle meter for non-consensual engagements. Strongly Recommended SexLab More Creatures SE Adds more friendly domestic creatures for Aroused Creatures to work with. There will be far fewer opportunities for engagements without this. Recommended Mods Billyys Animations for SE (third-party port) Creature group animations. Horny Creatures of Skyrim SE (third-party port) Adds animations for male NPCs on female creatures. SLAL SE Animations by Sailing Rebel Adds a few more non-consensual horse animations. One With Nature - Dynamic Animals and Creatures SE Allows normally hostile creatures such as wolves and deer to be treated as friendly. Installation Due to issues reported by some users, it is recommended to install this mod after starting a new game. Symptoms include missing MCM and/or the mod being non-functional. Use Mod Organiser 2 (fully supported) or Vortex Mod Manager. Enable the mod and run LOOT. Run Generate FNIS For Users and deal with any warnings or errors (they are all important). NMM and manual installation are not supported as they are simply too unreliable! Skyrim must be installed outside of Program Files to avoid potential issues with Windows UAC. This is not just an Aroused Creatures issue - modded Skyrim should never be installed in protected areas of the file system. Doing so can prevent SKSE and other modding tools from functioning correctly. Avoid any folder created by Windows itself, including Documents, Desktop, Downloads, etc. Folders in the root of a drive other than C are recommended. Exclusions must be configured in any antivirus or antimalware apps for the game installation folder, folders containing any modding tools including the mod manager, the mod manager instance or staging folder, and the mods download folder. As with install location, this is an issue for modded Skyrim in general not just Aroused Creatures. Antivirus can interfere with the normal operation of mod managers, SKSE and SKSE plugin mods like SexLab and PapyrusUtil which Aroused Creatures depends on. Once in-game ensure that SexLab is fully installed - this requires opening the SexLab MCM, clicking the Install option, exiting the menu then waiting for SexLab's "Ready" notification at the top left of the screen. Once SL installation is complete open the SexLab MCM again, choose the Animations Settings page and uncheck the Disable Starting Teleport option (to speed up animation start), then enable the Allow Creature Animations option (to install creature support). Close the menu and wait for the message that creature animations have been installed. Aroused Creatures will be active as soon as creature animation installation has finished. By default, Aroused Creatures does not display any notifications during initial installation. This is to avoid contributing to new-game notification spam. It is recommended to edit the SexLab Aroused settings to reduce the check/cloak frequency to once every 15 seconds. This will make arousal changes more responsive. Check the Aroused Creatures MCM > Help page for any issues with the installation. Highlight an indicator on this page to see an explanation and possible solution at the bottom of the interface. Updating If it ain't broke, don't fix it! If you are mid-game and the mod is doing everything you want it to, then consider not updating until your next playthrough. Updating always comes with the risk of new issues and unwanted behavior, which can be avoided if you don't need the fixes or new features the update provides. Before doing anything, make a named save. To do this, open the in-game console and use the command save "Before SLAC v4.11", for example. If the update goes badly, you can then reinstall the previous version and load up that save to get back to where you were. Back up your Aroused Creatures configuration in the AC MCM > Profiles page. Enter a name for the profile in the text field at the top right, then click a profile save slot below it. Again, if an update goes badly, you will be able to use the profile to get back to where you were much faster. Aroused Creatures is specifically designed to allow mid-game updates, and will handle conversion of settings and states where necessary. To update, simply uninstall the previous version and install the new one. Run LOOT to make sure the load order is updated. When loading the last save, there may be some notification messages to indicate that the update has made changes. Check your configuration, and enjoy. When updating mid-game across multiple versions, such as 4.08 to 4.11, there may be initial warnings and even errors in the logs due to function mismatches. These should be minor and temporary, and the mod will continue to function as normal. Downgrading is not supported. If you need to return to an earlier version it is advised to return to a save from before the update. How To Use Automatic The core functionality of Aroused Creatures is automatic and does not require user input. By default Aroused Creatures will be active as soon as SL is ready and creature animation has been enabled, but the initial settings may make engagement fairly rare. If a creature with a suitable arousal level is within range of a female NPC or PC they will begin to pursue them. When they are close enough they will start a non-consensual SL animation (or a consensual one if there are no alternatives). Only two pursuits can be active at the same time, one NPC and one PC, but another NPC pursuit can begin as soon as a victim is engaged. To increase the frequency with which engagements are triggered go to the Aroused Creatures MCM, select the PC/NPC Settings and reduce the Creature Arousal Threshold for the PC and/or NPC. Invitation To directly invite a creature to engage the PC access the Aroused Creatures MCM -> Dialogue & Interactions, find the Invite Creature Hotkey and chose an input. Adjust the Invite Arousal which will be used to test the creature's arousal when trying to invite them. Now stand close to a creature with the reticle over them and hit the invite key. A message should be displayed if the creature is not suitably aroused or cannot be animated for some reason, otherwise an SL animation should start. Hold the invite key for one second to try and perform oral sex on the creature. Hold the key for two seconds to invite nearby creatures of the same species as the targeted creature to a group animation. Settings in the Creature Framework MCM can be used to change the level at which creatures become visibly aroused to help show the player when they might be interested. Dialogue options can be enabled under Dialogue & Interactions that will allow you to direct your follower NPCs and creatures by talking to them. You may also extend this to non-followers. Some dialogue options will only be available after selecting an actor with the Target Select Key (default [N]) - for instance, select a creature then persuade your NPC follower to deal with it, or select an NPC and task your creature with chasing them down. Target actors can be selected at range, simply place the reticle over them and hit the target select key. They should glow blue to indicate selection and by default a notification will be displayed. There are plenty of other settings to explore and customise your experience. Hover over a setting in the MCM to view a description at the bottom of the interface In-Game Help There is now a Help MCM page which will display potential issues with the configuration of Aroused Creatures and SexLab. Hover over any warning to get a detailed description. The Help page will also list recently failed engagements and their failure codes. Hover over these codes to display a description of what they mean and any potential solutions. Saving and Loading Profiles Aroused Creatures configurations can now be saved and loaded via the Profiles MCM page allowing settings to be transferred between saves. When using MO2 these saved profiles will be found in the Overwrite mod under SKSE > Plugins > ArousedCreatures and may be moved to another mod if required. If they are moved to the Aroused Creatures mod itself then please remember to back them up before updating or they will be lost for good. It may be more prudent to store them in a separate mod specifically for such SKSE data. Arousal Exposure to nudity and witnessing sex acts will increase creature arousal and produce more frequent engagements. This is not controlled by Aroused Creatures. For issues with arousal not properly increasing please check the SexLab Aroused Redux SSE support thread or the support thread for your version of SL Aroused. In the SexLab Aroused MCM disable the option to prevent arousal changing while dressed. You may also wish to reduce the check frequency so that arousal is updated more promptly. Hitting the Target Select Key (Default [N}) on a creature while standing close to them will updated their arousal immediately. Under the Current Armour page of the SexLab Aroused MCM you can set your current armour to be treated as nude which will then increase arousal for nearby creatures more rapidly. Frequently Asked Questions Known Issues Change Log License All contained code and assets: GPLv3. Full license included in archive. Open Source means more and better mods for everyone. Please consider releasing your own mods under recognized open source licenses such as GPL or MIT and help build a foundation for future mod developers. Submitter Sailing Rebel Submitted 06/06/2018 Category Other Requires SexLab SE, SexLab Aroused Redux SSE Regular Edition Compatible No
- 2,110 replies
-
28
-
Version v04.13
501,408 downloads
Allow ❤️❤️friendly❤️❤️ creatures to take advantage of your character and NPCs. Any nearby non-hostile creatures with a high enough arousal will pursue and force themselves on (or seduce) your character or any available NPC. There are lots of configuration options to customise your experience, including dialogue and hotkey invitation. Aroused Creatures is designed to provide an immersive way to enable sex with creatures outside of combat. This is intended to compliment combat-sex mods like SexLab Defeat. As such, Aroused Creatures specifically avoids engagement with hostile creatures in order to allow combat mods like this to function. SexLab Aroused Creatures SE is developed from the Legendary Edition SexLab Aroused Creatures. For an LE backport of this mod use OsmelMC Mod Tweaks. Please note that any support for patched versions of Aroused Creatures must be sought from the authors of the patches. Hard Requirements SexLab SE and all of its requirements. SexLab Aroused Redux SSE and all of its requirements. Other versions of SexLab Aroused should work. Other Requirements Fore's New Idles in Skyrim SE (FNIS SE) and FNIS Creature Pack Run Generate FNIS For Users after installing or uninstalling this mod. Nemesis will not work. Without running this, everyone will t-pose. More Nasty Critters SE, Creature Framework, and Hentai Creatures (third-party port) Creature aroused models and animations. The Hentai Creatures mod also adds spells to spawn female creatures. Fuz Ro D-oh Silent Voice Silent dialogue readability. SexLab Defeat SE (Optional) Aroused Creatures is intended to compliment the combat sex features of Defeat. Use this to allow sex with enemy creatures. If installed, this mod also provides the player struggle feedback HUD meter. The Defeat ESP does not need to be enabled if you do not want the combat features but just the struggle meter for non-consensual engagements. Strongly Recommended SexLab More Creatures SE Adds more friendly domestic creatures for Aroused Creatures to work with. There will be far fewer opportunities for engagements without this. Recommended Mods Billyys Animations for SE (third-party port) Creature group animations. Horny Creatures of Skyrim SE (third-party port) Adds animations for male NPCs on female creatures. SLAL SE Animations by Sailing Rebel Adds a few more non-consensual horse animations. FunnyBizness SLAL Pack (third-party), more animations. One With Nature - Dynamic Animals and Creatures SE Allows normally hostile creatures such as wolves and deer to be treated as friendly. Installation Due to issues reported by some users, it is recommended to install this mod after starting a new game. Symptoms include missing MCM and/or the mod being non-functional. Use Mod Organiser 2 (fully supported) or Vortex Mod Manager. Enable the mod and run LOOT. Run Generate FNIS For Users and deal with any warnings or errors (they are all important). NMM and manual installation are not supported as they are simply too unreliable! Skyrim must be installed outside of Program Files to avoid potential issues with Windows UAC. This is not just an Aroused Creatures issue - modded Skyrim should never be installed in protected areas of the file system. Doing so can prevent SKSE and other modding tools from functioning correctly. Avoid any folder created by Windows itself, including Documents, Desktop, Downloads, etc. Folders in the root of a drive other than C are recommended. Exclusions must be configured in any antivirus or antimalware apps for the game installation folder, folders containing any modding tools including the mod manager, the mod manager instance or staging folder, and the mods download folder. As with install location, this is an issue for modded Skyrim in general not just Aroused Creatures. Antivirus can interfere with the normal operation of mod managers, SKSE and SKSE plugin mods like SexLab and PapyrusUtil which Aroused Creatures depends on. Once in-game ensure that SexLab is fully installed - this requires opening the SexLab MCM, clicking the Install option, exiting the menu then waiting for SexLab's "Ready" notification at the top left of the screen. Once SL installation is complete open the SexLab MCM again, choose the Animations Settings page and uncheck the Disable Starting Teleport option (to speed up animation start), then enable the Allow Creature Animations option (to install creature support). Close the menu and wait for the message that creature animations have been installed. Aroused Creatures will be active as soon as creature animation installation has finished. By default, Aroused Creatures does not display any notifications during initial installation. This is to avoid contributing to new-game notification spam. It is recommended to edit the SexLab Aroused settings to reduce the check/cloak frequency to once every 15 seconds. This will make arousal changes more responsive. Check the Aroused Creatures MCM > Help page for any issues with the installation. Highlight an indicator on this page to see an explanation and possible solution at the bottom of the interface. Updating If it ain't broke, don't fix it! If you are mid-game and the mod is doing everything you want it to, then consider not updating until your next playthrough. Updating always comes with the risk of new issues and unwanted behavior, which can be avoided if you don't need the fixes or new features the update provides. If you still want to update, then before doing anything, make a named save. To do this, open the in-game console and use the command save "Before SLAC v4.13", for example. If the update goes badly, you can then reinstall the previous version and load up that save to get back to where you were. Back up your Aroused Creatures configuration in the AC MCM > Profiles page. Enter a name for the profile in the text field at the top right, then click a profile save slot below it. Again, if an update goes badly, you will be able to use the profile to get back to where you were much faster. Aroused Creatures is specifically designed to allow mid-game updates, and will handle conversion of settings and states where necessary. To update, simply uninstall the previous version and install the new one. Run LOOT to make sure the load order is updated. When loading the last save, there may be some notification messages to indicate that the update has made changes. Check your configuration, and enjoy. When updating mid-game across multiple versions, such as 4.08 to 4.11, there may be initial warnings and even errors in the logs due to function mismatches. These should be minor and temporary, and the mod will continue to function as normal. Downgrading is not supported. If you need to return to an earlier version it is advised to return to a save from before the update. How To Use Automatic The core functionality of Aroused Creatures is automatic and does not require user input. By default Aroused Creatures will be active as soon as SL is ready and creature animation has been enabled, but the initial settings may make engagement fairly rare. If a creature with a suitable arousal level is within range of a female NPC or PC they will begin to pursue them. When they are close enough they will start a non-consensual SL animation (or a consensual one if there are no alternatives). Only two pursuits can be active at the same time, one NPC and one PC, but another NPC pursuit can begin as soon as a victim is engaged. To increase the frequency with which engagements are triggered, use the SexLab Aroused MCM to set the PC's armor as naked and this will allow general arousal to build much faster. You can also go to the Aroused Creatures MCM, select the PC/NPC Settings and reduce the Creature Arousal Threshold for the PC and/or NPC. To understand why engagements are not happening, go to the MCM Help page and hightlight the Failed Engagement codes to see an explaination at the bottom of the interface. Invitation To directly invite a creature to engage the PC access the Aroused Creatures MCM -> Dialogue & Interactions, find the Invite Creature Hotkey and chose an input. Adjust the Invite Arousal which will be used to test the creature's arousal when trying to invite them. Now stand close to a creature with the reticle over them and hit the invite key. A message should be displayed if the creature is not suitably aroused or cannot be animated for some reason, otherwise an SL animation should start. Hold the invite key for one second to try and perform oral sex on the creature. Hold the key for two seconds to invite nearby creatures of the same species as the targeted creature to a group animation. Settings in the Creature Framework MCM can be used to change the level at which creatures become visibly aroused to help show the player when they might be interested. Dialogue options can be enabled under Dialogue & Interactions that will allow you to direct your follower NPCs and creatures by talking to them. You may also extend this to non-followers. Some dialogue options will only be available after selecting an actor with the Target Select Key (default [N]) - for instance, select a creature then persuade your NPC follower to deal with it, or select an NPC and task your creature with chasing them down. Target actors can be selected at range, simply place the reticle over them and hit the target select key. They should glow blue to indicate selection and by default a notification will be displayed. There are plenty of other settings to explore and customise your experience. Hover over a setting in the MCM to view a description at the bottom of the interface In-Game Help There is now a Help MCM page which will display potential issues with the configuration of Aroused Creatures and SexLab. Hover over any warning to get a detailed description. The Help page will also list recently failed engagements and their failure codes. Hover over these codes to display a description of what they mean and any potential solutions. Saving and Loading Profiles Aroused Creatures configurations can now be saved and loaded via the Profiles MCM page allowing settings to be transferred between saves. When using MO2 these saved profiles will be found in the Overwrite mod under SKSE > Plugins > ArousedCreatures and may be moved to another mod if required. If they are moved to the Aroused Creatures mod itself then please remember to back them up before updating or they will be lost for good. It may be more prudent to store them in a separate mod specifically for such SKSE data. Arousal Exposure to nudity and witnessing sex acts will increase creature arousal and produce more frequent engagements. This is not controlled by Aroused Creatures. For issues with arousal not properly increasing please check the SexLab Aroused Redux SSE support thread or the support thread for your version of SL Aroused. In the SexLab Aroused MCM disable the option to prevent arousal changing while dressed. You may also wish to reduce the check frequency so that arousal is updated more promptly. Hitting the Target Select Key (Default [N}) on a creature while standing close to them will updated their arousal immediately. Under the Current Armour page of the SexLab Aroused MCM you can set your current armour to be treated as nude which will then increase arousal for nearby creatures more rapidly. Frequently Asked Questions Known Issues Change Log License All contained code and assets: GPLv3. Full license included in archive. Open Source means more and better mods for everyone. Please consider releasing your own mods under recognized open source licenses such as GPL or MIT and help build a foundation for future mod developers. -
SexLab Compatible Noble Bed Double 02 LE/SE View File A simple static mesh replacement for the Nobel Double Bed 2 (noblebeddouble02.nif) which removes the collision mesh from the upper beams. This prevents you and your NPCs from becoming trapped after using the bed for an SL animation. This comes in two versions: SexLab Compatible Noble Bed Double 02 v1.1 Just the collision mesh altered letting you clip through the beams. SexLab Compatible Noble Bed Double 02 v1.1 No Beams If you don't like the clipping then this removes the beams as well and leaves the posts. Installation: Drop the contents of the zip into your Skyrim Data folder. This should add meshes/furniture/noble/noblebeddouble02.nif You should also be able to use a mod manager such as NMM. Uninstallation: Remove meshes/furniture/noble/noblebeddouble02.nif Requirements: None. You might find it useful even if you don't need it for SL. Compatibility: This will not be compatible with any mod that replaces the same mesh. As of writing the Static Mesh Improvement Mod has not modified this piece of furniture so there shouldn't be a conflict. The Unofficial Skyrim Patch replaces this mesh but it replaces it with a nif that is identical to the vanilla version. USP fixes a bug that prevents the player from accessing the use option on the bed from both sides but this has nothing to do with the nif so it's not clear why it's included in their archive. This replacer does not conflict with the fix and will override the USP supplied nif. Issues: I've tested in-game, of course, but not exhaustively. There may be places where the new collision mesh conflicts with placement. For instance, clutter may be displaced when entering a cell or there may be cells where it blocks the nav mesh (though I doubt it). If you encounter any problems like this, let me know where and what and I'll see what I can do. License: Do as you please. Q: There seems to be a missing texture on the bottom of the beams. A: This is actually a problem with the vanilla mesh so far as I can tell - there is no surface on the underside to take a texture. You'll see that even without this mod. I'm not planning on fixing it as I imagine SMIM will get to it eventually. Alternatives: Noble Bed 02 Collision Fix A similar replacer by Robo00 which uses the collision mesh from noblebeddouble01. This removes most of the collision from the upper part of the bed including the foot-posts, half the head-posts and the headboard and does not alter the object mesh at all. You may find this preferable if you don't like the 3rd-person camera bouncing off the posts. Submitter Sailing Rebel Submitted 02/04/2014 Category Other Requires Special Edition Compatible
- 23 replies
-
4
-
Version 0.3
11,220 downloads
This mod greatly increases the spawn of non-unique female NPCs by removing or replacing male NPCs in the levelled lists. Wherever possible this includes enemy factions, guards and neutrals such as hunters and adventurers. This does not touch named NPCs at all so townsfolk and quest characters will not become female. This very early version requires Dawnguard and Dragonborn DLCs. If this turns out to be something people are interested in then non-DLC versions may be on the to-do list. Updates: SE v0.3 - A simple conversion of the LE mod to SE using Cathedral Assets Optimizer. v0.3 - adds female guards and soldiers to the Imperial factions including Whiterun and Solitude guards. These areas related quests will still spawn male soldiers and guards that are specified by voice type. The CW storyline missions will still spawn male ally soldiers. v0.2 - adds female orcs, khajiits and argonians to the bandit ranks. There might be slightly more of these races appearing than normal because of the shorter lists but I've tried to moderate somewhat. I'll leave previous versions up in case you have problems with the latest. Limitations: Some spawns bypass the levelled lists in order to place specific unnamed NPCs, most likely to ensure particular voice types for scripted conversations. Other spawns may simply want very specific demographics such as all orc males or male Forsworn which you'll come across from time to time. Misc quests to eliminate bandits will likely spawn an NPC boss of either sex regardless of this mod. At the moment all this does is change the lists. One problem with such an approach is that there are lists which only contain male NPCs with no female alternatives. In some cases it's possible to just select some other female character from the same faction (male Forsworn berserkers will become female Forsworn mages), in others, such as many mini-bosses, there simply is no alternative so those males will still spawn. Known Issues: Duplicates: There are far fewer female templates than male so this radically reduces the variation in NPCs. In some cases the available female templates are outnumbered 4:1. As a result you're more likely to see twins. Certain small bandit spawns such as the Whitewatch Tower attack seem to favour a single sub-list which contains only four or five units pretty much guaranteeing that there will be duplicates. This mod may affect game balance. Requirements: For the current version both Dawnguard and Dragonborn DLC are required Installation: Drop the esp and bsa files into your Data folder or use a mod manager and make sure the esp is activated in your load order. Typically you'll want this as high in the order as it will go below your DLC to let it be overridden by other mods. Note that this only affects new spawns, so male NPCs that spawned in an existing game before installation will still be there until they are killed or despawn. If you install this to an existing game expect the bandits, guards, etc. to still be male for the next thirty days. Even after that, as discussed above, the occasional male will still show up in specific locations (i.e. quest spawned NPCs, Imperial soldiers, White River Watch bandits, etc). Updating: Overwrite the existing MoreWomenDGDB.esp and MoreWomenDGDB.bsa files with the new versions. It will take up to thirty days for the changes to start taking effect. Uninstall: In general, do not uninstall mods mid-game as this can lead to unpredictable results and contribute to save file corruption. Otherwise, just remove the MoreWomenDGDB.esp and MoreWomenDGDB.bsa files It will take at least an in-game month for the spawns to return to normal. You can speed things up for specific areas by clearing bandit camps and interior cells (cleared areas reset after ten days). For versions using the bsa file you may find that straggling female units added by this mod may have the grey-face bug until they despawn. Compatibility / Conflicts: This mod replaces a lot of modified NPC levelled lists. If you have other mods that alter these lists you should probably place this one above it in the load order to allow it to be overridden. This does not alter item levelled lists so randomly spawning custom items like Deviant Devices For the Masses should still appear. This mod has been cleaned in TES5edit. There is a conflict with Dawnguard since DG adds male units to the vampire lists which this mod then removes - this is intentional. License: This mod is released under GPLv3 Open Source means more and better mods for everyone. Please consider releasing your own mods under recognized open source licences such as GPL or MIT and help build a foundation for future mod developers. Alternatives: Feminised Leveled Lists Masculinized Level Lists Skyrim Scaling Stopper with the Men Not Usually Warlike patch which requires Skyrim Monster Mod as a master.- 1 review
-
11
-
- women
- levelled lists
-
(and 7 more)
Tagged with:
-
Version 1.1
33,190 downloads
A simple static mesh replacement for the Nobel Double Bed 2 (noblebeddouble02.nif) which removes the collision mesh from the upper beams. This prevents you and your NPCs from becoming trapped after using the bed for an SL animation. This comes in two versions each for both LE and SE: SexLab Compatible Noble Bed Double 02 v1.1 Just the collision mesh altered letting you clip through the beams. SexLab Compatible Noble Bed Double 02 v1.1 No Beams If you don't like the clipping then this removes the beams as well and leaves the posts. Installation: Drop the contents of the zip into your Skyrim Data folder. This should add meshes/furniture/noble/noblebeddouble02.nif You should also be able to use a mod manager such as NMM. Uninstallation: Remove meshes/furniture/noble/noblebeddouble02.nif Requirements: None. You might find it useful even if you don't need it for SL. Compatibility: This will not be compatible with any mod that replaces the same mesh. As of writing the Static Mesh Improvement Mod has not modified this piece of furniture so there shouldn't be a conflict. The Unofficial Skyrim Patch replaces this mesh but it replaces it with a nif that is identical to the vanilla version. USP fixes a bug that prevents the player from accessing the use option on the bed from both sides but this has nothing to do with the nif so it's not clear why it's included in their archive. This replacer does not conflict with the fix and will override the USP supplied nif. Issues: I've tested in-game, of course, but not exhaustively. There may be places where the new collision mesh conflicts with placement. For instance, clutter may be displaced when entering a cell or there may be cells where it blocks the nav mesh (though I doubt it). If you encounter any problems like this, let me know where and what and I'll see what I can do. License: This mod is released under GPLv3 Open Source means more and better mods for everyone. Please consider releasing your own mods under recognized open source licences such as GPL or MIT and help build a foundation for future mod developers. Q: There seems to be a missing texture on the bottom of the beams. A: This is actually a problem with the vanilla mesh so far as I can tell - there is no surface on the underside to take a texture. You'll see that even without this mod. I'm not planning on fixing it as I imagine SMIM will get to it eventually. Alternatives: Noble Bed 02 Collision Fix A similar replacer by Robo00 which uses the collision mesh from noblebeddouble01. This removes most of the collision from the upper part of the bed including the foot-posts, half the head-posts and the headboard and does not alter the object mesh at all. You may find this preferable if you don't like the 3rd-person camera bouncing off the posts. -
[WIP] More Women LE/SE View File This mod greatly increases the spawn of non-unique female NPCs by removing or replacing male NPCs in the levelled lists. Wherever possible this includes enemy factions, guards and neutrals such as hunters and adventurers. This does not touch named NPCs at all so townsfolk and quest characters will not become female. This very early version requires Dawnguard and Dragonborn DLCs. If this turns out to be something people are interested in then non-DLC versions may be on the to-do list. Updates: v0.3 - adds female guards and soldiers to the Imperial factions including Whiterun and Solitude guards. These areas related quests will still spawn male soldiers and guards that are specified by voice type. The CW storyline missions will still spawn male ally soldiers. v0.2 - adds female orcs, khajiits and argonians to the bandit ranks. There might be slightly more of these races appearing than normal because of the shorter lists but I've tried to moderate somewhat. I'll leave previous versions up in case you have problems with the latest. Limitations: Some spawns bypass the levelled lists in order to place specific unnamed NPCs, most likely to ensure particular voice types for scripted conversations. Other spawns may simply want very specific demographics such as all orc males or male Forsworn which you'll come across from time to time. Misc quests to eliminate bandits will likely spawn an NPC boss of either sex regardless of this mod. At the moment all this does is change the lists. One problem with such an approach is that there are lists which only contain male NPCs with no female alternatives. In some cases it's possible to just select some other female character from the same faction (male Forsworn berserkers will become female Forsworn mages), in others, such as many mini-bosses, there simply is no alternative so those males will still spawn. Known Issues: Duplicates: There are far fewer female templates than male so this radically reduces the variation in NPCs. In some cases the available female templates are outnumbered 4:1. As a result you're more likely to see twins. Certain small bandit spawns such as the Whitewatch Tower attack seem to favour a single sub-list which contains only four or five units pretty much guaranteeing that there will be duplicates. This mod may affect game balance. Requirements: For the current version both Dawnguard and Dragonborn DLC are required Installation: Drop the esp and bsa files into your Data folder or use a mod manager and make sure the esp is activated in your load order. Typically you'll want this as high in the order as it will go below your DLC to let it be overridden by other mods. Note that this only affects new spawns, so male NPCs that spawned in an existing game before installation will still be there until they are killed or despawn. If you install this to an existing game expect the bandits, guards, etc. to still be male for the next thirty days. Even after that, as discussed above, the occasional male will still show up in specific locations (i.e. quest spawned NPCs, Imperial soldiers, White River Watch bandits, etc). Updating: Overwrite the existing MoreWomenDGDB.esp and MoreWomenDGDB.bsa files with the new versions. It will take up to thirty days for the changes to start taking effect. Uninstall: Just remove the MoreWomenDGDB.esp and MoreWomenDGDB.bsa files It will take at least an in-game month for the spawns to return to normal. You can speed things up for specific areas by clearing bandit camps and interior cells (cleared areas reset after ten days). For versions using the bsa file you may find that straggling female units added by this mod may have the grey-face bug until they despawn. Compatibility / Conflicts: This mod replaces a lot of modified NPC levelled lists. If you have other mods that alter these lists you should probably place this one above it in the load order to allow it to be overridden. This does not alter item levelled lists so randomly spawning custom items like Deviant Devices For the Masses should still appear. This mod has been cleaned in TES5edit. There is a conflict with Dawnguard since DG adds male units to the vampire lists which this mod then removes - this is intentional. License: Do as you please. Alternatives: Feminised Leveled Lists Masculinized Level Lists Skyrim Scaling Stopper with the Men Not Usually Warlike patch which requires Skyrim Monster Mod as a master. Submitter Sailing Rebel Submitted 02/09/2014 Category WIP / Beta Requires Dawnguard and Dragonborn DLCs Special Edition Compatible
- 42 replies
-
1
-
- women
- levelled lists
-
(and 7 more)
Tagged with: