Jump to content

SexoutBreeder [v4.3] The "I didn't know I was playing Sim City" Update.

Guest user29

By Guest user29,
in Downloads - Fallout Sexout

Recommended Posts

Guest user29

Guest user29

Posted
Posted

Thanks for the report. I need to do a full sweep of the bighorner ranch. It's been a while since I was up there and played through it. Some of that stuff might be broken. I'll also look into your bloatfly cave oddities.

 

The texture you need for the summer rags should be in the breeder data file. Though it's based loogie's slave rags, so I would try getting his data pack as well just in case. For story purposes your pregnancy progresses faster than the other girls (who don't progress at all technically) The player and Sam are special in an as of yet un-revealed way. If you blow a deathclaw guard you should find that cures dehydration and hunger ;) . Pregnancy sizes are a pregnancy mod thing. The reason Sam gets so big is because I control what outfits she wears to create the illusion of pregnancy.

 

Lastly, I can't do anything to help people who use something other than the cali body with boob clipping issues. Your second suggestion is good but it'd require way too much work for not enough gain. The lactation system is just suppose to be something minor that can be fun sometimes but othertimes you'll want to toggle it off.

Link to comment
NatanusLikens

NatanusLikens

Posted
Posted

er... well I only see one piece for this armor/clothing. I'm having the same issue, missing meshes (texture is accounted for but not the meshes). I only have the one Summer rags outfit in your data file.

 

You really should set the Deathclaw episode up like a quest giving you way points... I just stumbled across the fourth member of the "team" after 2 days of searching... partly due to the fact that Sam wonders around the camp instead of staying near the "path".

 

Good job over all though, I've said it before I learn from what you've done to work on my Canine Slut mod... just wished there was a crawling animation for the females.

Link to comment
NatanusLikens

NatanusLikens

Posted
Posted

Found it... http://www.loverslab.com/showthread.php?tid=3455&page=98&highlight=Summer+Rags

 

Oh... I see the issue... your original post of this has this placed PregnantCali/Loogie/SummerRags

 

But you used PregnantCali/SummerRags

 

So if I'm right all you have to do is copy/paste to the correct file path.

 

Yep, Take the SummerRags and add them to Data/Meshes/Armor/PregnantCali/Loogie/SlaveRags. What's happening is the items are setup to read the Nif files SummerRags from the SlaveRags file, not from Data/Meshes/Armor/PregnantCali/SummerRags.

 

You might want to fix your file setup to reflect this User29. It'll be easier then redoing the outfit in G.E.C.K.

 

HOWEVER this hasn't fixed Sam... what outfit is she supposed to be wearing so I can look into it for you.

 

User29... I wanna slap you, silly thing... So G.E.C.K. shows Sam's out fits in... PregnantCali/Samantha/SamanthaCP#... but your data file doesn't have this anywhere in it... so I'm going to say to everyone till he updates his Data file... find ANY out fit you want and... Copy paste them to the proper file path with the following names...

 

SamanthaP(0,1,2) (I'm going to use FarmSlave outfit)

SamanthaCP(0,1,2,3,4,5,6) (Lady outfit)

SamanthaNCP(0,1,2,3,4,5,6) (Leather Armor sounds good)

SamanthaCompanionCP(0,1,2,3,4,5,6)

SamanthaCompanionNCP(0,1,2,3,4,5,6)

 

I highly suggest finding an outfit set that reflects the same stages of pregnancy as they should be.

 

User29 LOL... you welcome btw and thanks this was kind of fun looking into the issue(s).

Link to comment
Rogue_Kitsune

Rogue_Kitsune

Posted
Posted

@Natanus: I haven't tried the Deathclaw chapter yet, so I'm not 100% certain on this, but... what you're talking about doing there shouldn't be necessary. Even though I haven't played it yet, I have a habit of browsing through all the files I download before installing them, and I distinctly recalled having seen outfits set up for Samantha - they look like torn up NCR armor. So... if they're not showing up for you, it's probably because you're missing a pack. Specifically, you need to get the latest Maternity Clothes pack.

 

Also, unless it's been updated again since I last checked, those "Companion" outfits you mentioned probably are not in the download - I only have Samantha(P0-P2), SamanthaNC(P0-P6), and SamanthaC(P0-P6). My guess is this is because they don't actually exist yet - there might be entries for them in the .esp already, but as far as I know, she hasn't really been set up as a full companion yet, so those are probably just placeholders for the time being.

Link to comment
zippy57

zippy57

Posted
Posted

It would probably help if the Maternity Clothes thread accurately listed the last time it was updated. The thread's title says 03/07 (which is either March 7th or July 3rd) and the last thing listed in the changelog is April 11th. It's not surprising people aren't up-to-date with it.

 

I know it's not your thread so you can't do anything about it directly. I just figured it was worth mentioning.

Link to comment
mrmuffins

mrmuffins

Posted
Posted

Where is The Jawba's Club ?

I saw places in translating ls mod.

 

What is its purpose if you can explain a bit.

 

What purpose will also A8Town?

 

Bye

 

Jawba's Club has been placed on hold for the time being. It was just a series of ideas, and is not in the mod in any form for now.

 

A8Town is a WIP, and will be the location for the next episode. Right now, it's empty and not functional.

Link to comment
Rogue_Kitsune

Rogue_Kitsune

Posted
Posted

I was going to point that out as well - like I'd said, the only reason I knew those meshes did exist was because I'd gone browsing through the entire download at some point. Had I not done that, and remembered it, I would've been completely lost, too; it looks like it is mentioned that it was added to the download in that thread...but it's not until page 140-something-ish. So, it's nothing against the guys over there, they've done some amazing work...it'd just be nice if the OP would be updated a bit more often. XD

 

 

All that aside, I had a couple thoughts I wanted to share for this mod specifically. First off, I think this has been mentioned before, but I'm not sure if it's been addressed yet, so: I just played through the Bloatfly Cave again last night, and after the second one had been born, I got a message about "The deathclaws have begun to trust you and will now allow you to explore more of the cave." Paraphrasing, of course - I don't remember the exact wording off-hand. Still, it's clearly not supposed to be there, as my character hasn't even gone anywhere near deathclaws yet, and more importantly, I'm a bit concerned that might break part of the deathclaw chapter, since that message appeared before it was supposed to. (I've also tried messing around with the Bighorner Ranch a little, and have run into the same issue there.)

 

 

And, though I'd prefer not to turn this into a massive Wall-O'-Text, I had a suggestion that I feel I have to mention, in case it hasn't been thought of already. So. Most people don't seem to want large numbers of random offspring following them around, yes? So what if there were a way to help limit that some? Most of the offspring born as a result of the scenarios in this mod would actually make sense to stay where they're born, with others of their kind, rather than following the player off into the wastes - would it be at all possible to remove these offspring, either immediately after birth (if you're in the correct area), or upon the player's next visit? Maybe even replace the "Offspring" versions with standard, generic versions, with normal AI packages? (For example, if you birthed a ton of bloatflies, there'd be more bloatflies buzzing around the cave? Though maybe not exactly as many more; maybe only one new standard one for every three, four, five offspring. [i figure that would help in instances where there can be crazy numbers born all at once, (like 60+ bloatflies in a single go - which has happened!)])

Link to comment
Guest user29

Guest user29

Posted
Posted

Breeder locks up when escaping from Death-claw Promontory. Sam gives birth near the exit and no options or anything come up' date=' and my character is locked in place.

[/quote']

 

I thought I fixed that for somebody else. Are you waiting at all. It takes like 10 seconds for her to talk to you but there's like no way it can't work anymore. Unless halstrom changed something in birthing.

 

I cannot seem to find Sam in Deathclaw escape to update the quest. I have talked to Jessica and i keep seeing lucy but i have not seen Sam. I gave Jessica the guns and the metal.

 

There's a chance she's fallen through the floor if you had her entertain one of the guards. If she's glitched on you you'll need to reload a save . Sorry.

 

I got a message about "The deathclaws have begun to trust you and will now allow you to explore more of the cave." Paraphrasing' date=' of course - I don't remember the exact wording off-hand. Still, it's clearly not supposed to be there,

[/quote']

 

Thanks I'll fix that up right now.

Link to comment
Guest user29

Guest user29

Posted
Posted

If anyone can tell me why the hell that tree is floating in the center of the new town I would greatly appreciate it. I've tried deleting it in my patch and it deletes in the geck but whenever I reload it in the geck it reappears.

Link to comment
Hyunkel_Hirum

Hyunkel_Hirum

Posted
Posted

Cercis01, if your hud disappeared and you can only rotate your char in the same place, this can be fixed by opening the console and typing "enableplayercontrols".

 

User29 I've been thinking in a solution for the lactation issue with a BNB body, and I think the only solution would be to make the breasts bigger than the BNB ones so that they are covered. I'm guessing I would have to edit the current models using 3DSMAX. Do you have any tutorial that I could see so that I can change their size?

 

I really liked your idea of lactation, and I think could be further expanded (perhaps in the bighorner ranch or breastfeeding your offspring), therefore I really want to get it working for more body variants.

 

In the attachment you can see more clearly my issue.

 

Also, I wanted to ask you something. In the bighorner farm, Pam calls you a cow, as well as McDonald, but shouldn't they call you a brahmin, since cows seem to have gone extinct after the nuclear war? Or are brahmin hermaphrodites? I'm not very knowledgeable in the Fallout lore so that's why I'm asking.

Link to comment
NatanusLikens

NatanusLikens

Posted
Posted

Ah... I had that problem to... it has to do with the "normal" body you use. I forgot where to find the link but someone showed me a smaller breast size that is covered up by the "Huge Tits".

 

I don't have any skill at animation (yet) but I'd like to offer suggestions about the lactation.

 

In Lovers for Oblivion someone had made a simple animation that showed essential what amounted to color running over the body to show being cum covered. I was thinking on this and the Lactation, but to a more refined version. The idea would be to make it look like something dripping off the surface, I use blender, so what I was going to try is, look for a tutorial about running water or more correctly RAIN. The only difference would be the color. Complex yes... do able? I believe it is though it would take ALOT of time.

 

Breast would be easier just a few drops every few seconds repeating, I suggest looking at Lactation porn to get an idea. It would need to simulate a thin liquid (I think) hence why I choose rain as a reference.

 

For a Cum Body which I think Sexout should have/needs you would have to do multiple animations, each splatter that is. Now it would have to move slower seeing as cum is thicker than water, but I say learning how to simulate rain or sweat on a body would work.

 

Sry for tying up Breeder Forum for this, but it got brought up.

Link to comment
tsilverman

tsilverman

Posted
Posted

Ok, I've spent a lot of time trying to figure this out and searching to forums to no avail. After giving birth to offspring while in the Deathclaw cave, they start attacking the offspring which is invulnerable it seems. Any idea what could be the problem?

 

I'm using the latest version of Pregnancy and breeder.

Link to comment
tsilverman

tsilverman

Posted
Posted

That's another thing, she also gave birth to an asian offspring, not a deathclaw.

 

Edit: ok. I've been trying to analyze the problem. I noticed that after the initial ambush outside the prominatory, she is being given the wrong token. Says she has a AF token which I assume is for Asian offspring instead of a gestating deathclaw egg.

I'm trying to figure out why she's getting that token instead of the proper token but I can't seem to find the script for outside just outside where you get ambushed.

Link to comment
Guest
This topic is now closed to further replies.
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

View Community Rules

Help Support LoversLab

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. For more information, see our Privacy Policy & Terms of Use