Fill her up

[THT54]

i Use the mod "Fill her up" and a few seconds after the inflation of the belly it just resets them to standard.
(i also use beeingFemale but there wasnt a problem before to me.. today it startet fucking up things)
i highly think that beeing female and fill her up are going each other in their ways...
is there any method to use them both together?

 

[Tefajo]

I do not think so. I Figure that when an actor (NPC) gets the spell effect of one mod indicating to the game  that "Belly should be inflated with cum" and the other mod indicating "its not pregnant, therefor belly should be flat" only 1 of those mods can prevail.

May if there is a compatibility patch? Else i think only the mod that makes the latest scan on that actor will prevail (and if they do a routine after x amount of seconds you might even get an "interminent filled / flat belly")

 

[4onen]

Funny this came up. Yes, yes there is, and it just so happens to be maintained by me.

https://www.loverslab.com/topic/53542-fill-her-up-framework-compatibility-patch-2015-10-22/ 

Anyway, the issue so far was that FHU used NetImmerse alone, whereas most mods these days use NetImmerse Override which allows for compatibility. Even the (so-called) compatibility frameworks use NetImmerse Override so that they can maintain compatibility with mods like mine. I decided to just use NIO because it's already compatible with everything and almost everyone has it installed.

So, have fun!

 

NOTE: Be forewarned that using the compatibility patch requires updating to FHU 2.0, so you'll have to clean-save out your existing FHU installation.

[foxminoso]

hi ! i just installed this mod through

SexLab Inflation Framework 1.1.4b

but in the setting's the "cum amount multiplier" is set to 0.00 when i try to set it up or set by default (1.00) it get back to 0.00 when i left the menu and wont work

   

[Arcpaladin]

Hello,

 

What is the Quest ID for a Warm Delivery? Its stuck and will not progress beyond the second filling scene.

 

Thx

 

[Nazzzgul666]

Hello,

 

What is the Quest ID for a Warm Delivery? Its stuck and will not progress beyond the second filling scene.

 

Thx

Too long ago to remember what "the second fillling scene is", but if you mean the second quest where you're back at the shop, that's where the quests ends afaik... it was never finished.

[Selky]

Hello.
I use fill her up v2.
It work perfect ♥
Well, until i add devious expension, asset, and integration.
I searched for a while something i read about devious having a kind of belly inflation that break fill her up. I have to turn that option off.
Sadly i dont found that topic, and worst, i dont seen anything in MCM about belly inflation to turn off.

I tried to make a clean install with fill her up. Still same. It dont work cause devious things.
Someone can help please?
 

Pretty sure there devious users using fill her up. What's your secret please ♥
Thanks! That's all folks!

[wrathalos]

30 minutes ago, Selky said:

Hello.
I use fill her up v2.
It work perfect ♥
Well, until i add devious expension, asset, and integration.
I searched for a while something i read about devious having a kind of belly inflation that break fill her up. I have to turn that option off.
Sadly i dont found that topic, and worst, i dont seen anything in MCM about belly inflation to turn off.

I tried to make a clean install with fill her up. Still same. It dont work cause devious things.
Someone can help please?
 

Pretty sure there devious users using fill her up. What's your secret please ♥
Thanks! That's all folks!

Can you define break? I use both and have no issues. Are your DD mods before your FillHerUp mod in the load order? 

In the MCM go Devious Devices > Devices > scroll down until you see "Breast Node Management" and "Body Node Management" > Make sure they are unchecked. This option prevents scaling on those nodes to try and ensure a better look on the devices. If they are checked wearing a device will force the node to scale to whatever you have set in bodyslide. This would be the first thing I would check.

If you mean it doesn't show the expansion when wearing armor you will need the bodyslide files. Those should be included though. As far as I know those are included with the DD Assets & Expansion. Check to make sure the bodyslide files are installed. Even then its not perfect and you will have clipping of the meshes at higher weights, but you will see the change in the bodyscale with this.

If it is causing CTD's I have no clue what the issue would be. If this is your problem I would just try cleaning the save file using Fallrim Tools or a similar save cleaner. (Uninstall the mod > load the file that had the mod installed previously > re-save the file > exit skyrim > load the file using the save cleaner > Clean unattached instance/undefined elements > save the clean file > re-install the mod)

[Selky]

40 minutes ago, wrathalos said:

Can you define break? I use both and have no issues. Are your DD mods before your FillHerUp mod in the load order? 

In the MCM go Devious Devices > Devices > scroll down until you see "Breast Node Management" and "Body Node Management" > Make sure they are unchecked. This option prevents scaling on those nodes to try and ensure a better look on the devices. If they are checked wearing a device will force the node to scale to whatever you have set in bodyslide. This would be the first thing I would check.

If you mean it doesn't show the expansion when wearing armor you will need the bodyslide files. Those should be included though. As far as I know those are included with the DD Assets & Expansion. Check to make sure the bodyslide files are installed. Even then its not perfect and you will have clipping of the meshes at higher weights, but you will see the change in the bodyscale with this.

If it is causing CTD's I have no clue what the issue would be. If this is your problem I would just try cleaning the save file using Fallrim Tools or a similar save cleaner. (Uninstall the mod > load the file that had the mod installed previously > re-save the file > exit skyrim > load the file using the save cleaner > Clean unattached instance/undefined elements > save the clean file > re-install the mod)

It dont work at all. It's broke. Even a new install from fill her up.
Even unchecking (it was already uncheck) belly node and bra. I'm not sure but it was about uncheck something else.
I moved fill her up all belong mod list and it still not work.
Are you using V2?
I'm using the both V2 version.
The beta nio release, and fill her up v2, cause sound we need both files to make it work.
You are using that too?
I just check on my nude chatacter if belly grown, it dont, and in MCM inflated actor are keep to zero.
There's something else. It worked like a charm before devious stuff.
I still need to try a new save just to be sure... I remind the topic was talking about it...

[Selky]

23 minutes ago, Selky said:

It dont work at all. It's broke. Even a new install from fill her up.
Even unchecking (it was already uncheck) belly node and bra. I'm not sure but it was about uncheck something else.
I moved fill her up all belong mod list and it still not work.
Are you using V2?
I'm using the both V2 version.
The beta nio release, and fill her up v2, cause sound we need both files to make it work.
You are using that too?
I just check on my nude chatacter if belly grown, it dont, and in MCM inflated actor are keep to zero.
There's something else. It worked like a charm before devious stuff.
I still need to try a new save just to be sure... I remind the topic was talking about it...

So, this work, with a new game.
Sh...
I dont want to make a new game. *pouts*
I noticed blush when aroused worked too with my new random character.
I there a way to avoid the new start? What is that magic tool that clean save? I'll look on it. maybe it worth it! Thanks.

[wrathalos]

1 hour ago, Selky said:

So, this work, with a new game.
Sh...
I dont want to make a new game. *pouts*
I noticed blush when aroused worked too with my new random character.
I there a way to avoid the new start? What is that magic tool that clean save? I'll look on it. maybe it worth it! Thanks.

https://www.nexusmods.com/skyrim/mods/76776/

This is the one I use. Yes I have V2 with NIoverride. Try this tool and make sure you check that MCM setting.

[PsychosCreed]

I've tried everything and the bellies just dont inflate anymore

[asguinn]

The trouble I have is that the quest just won't begin. I go to Quicksilver Trading Company and get him to say "Follow me", but then he never moves.

[Gullz]

Would it be possible to make the "Race cum amounts" more precise or a relative cum amounts in-between races? For example, I'd like to have that dragons have a load at 100, the "human" races would be at 5 ish, the horses at 15, the dogs at 1.5, etc. 

With what we have right now, you can have in-between 0.10 to 5, with 0.05 intervals. To have a big difference from a small and a big race, I have to put all the races at 0.10 to 1 and the dragon at 5. It would be much better if I could, at least, have 0.01 intervals or change the maximum value to something like 50 or 100. Maybe even have a bigger cum multiplier.