Jump to content

Sexout Tryout Legion.esm & SexoutPowderGangers.esp sought

Falloutbabe

Recommended Posts

Falloutbabe

Falloutbabe

Posted
Posted

Once again I must apologize for having started a new thread to a well-old problem myself first. But as always mentioned, my english (despite trying) for a comprehensive forum search not sufficient. Therefore, this text was once again created a translation program.

But now to my problem.
When you install the Tryout - Hard Prison Time.esp in FOMM emerged following message:

Tryout - Hard Prison Time.esp
Author: xXSoSoXx
Description:
This mod is based on Loogie's tryout mod and changes the way the Powder gangers, Especially the ones at the NCR Correctional Facility, interact with you.
Masters:
FalloutNV.esm
Sexout.esm
SexoutCommonResources.esm
SexoutSlavery.esm
SexoutLegion.esm
SexoutPowderGangers.esp
SexoutPowderGangers (HPT tweaks) .esp

I have no SexoutLegion.esm and SexoutPowderGangers.esp, everything else is up and more or less run. Where can I find now the bbeiden esagten files, since I'm already followed some links in the download area without getting to their destination?

MfG Falloutbabe

 

***************************************************************************************************************************************************

 

Wieder einmal muss ich mich als erstes dafür entschuldigen, einen neuen Thread zu einem wohl alten Problem gestartet zu haben. Aber wie stets erwähnt, mein Englisch reicht (trotz Versuch) für eine umfassende Forensuche leider nicht aus. Daher wurde auch dieser Text mal wieder mit einem Übersetzungsprogramm erstellt.

Aber nun zu meinem Problem.
Bei der Installation des Tryout - Hard Prison Time.esp  taucht im FOMM folgende Meldung auf:
 

Tryout - Hard Prison Time.esp
Author: xXSoSoXx
Description:
This mod is based on Loogie's Tryout mod and changes the way the Powder Gangers, especially the ones at the NCR correctional facility, interact with you.
Masters:
FalloutNV.esm
Sexout.esm
SexoutCommonResources.esm
SexoutSlavery.esm
SexoutLegion.esm
SexoutPowderGangers.esp
SexoutPowderGangers (HPT Tweaks).esp

Mir fehlen die SexoutLegion.esm und die SexoutPowderGangers.esp, alles andere ist installiert und mehr oder weniger lauffähig. Wo finde ich nun die bbeiden esagten Dateien, da ich im Downloadbereich schon einigen Verlinkungen gefolgt bin, ohne ans Ziel zu kommen?

MfG Falloutbabe

 

RitualClarity

RitualClarity

Posted
Posted

 

But now to my problem.

When you install the Tryout - Hard Prison Time.esp in FOMM emerged following message:

 

Tryout - Hard Prison Time.esp

Author: xXSoSoXx

Description:

This mod is based on Loogie's tryout mod and changes the way the Powder gangers, Especially the ones at the NCR Correctional Facility, interact with you.

Masters:

FalloutNV.esm

Sexout.esm

SexoutCommonResources.esm

SexoutSlavery.esm

SexoutLegion.esm

SexoutPowderGangers.esp

SexoutPowderGangers (HPT tweaks) .esp

Tryouts Hard Prison Time isn't compatible with the current Tryout's mod. That mod is outdated and the files you are looking for aren't on the site anymore. Until someone does update that mod it will be difficult if not impossible to use. Oh and No. just getting the older version of Tryouts won't work as SCR has had a major rework since that time. I would suggest you just use the current Tryouts mod and ignore this one until fixed. (If ever fixed)

RitualClarity

RitualClarity

Posted
Posted

Tryouts does exist and has been reworked for more stability and functionality. I strongly recommend you giving that a try. It is only the Tryouts spin off mods (additional mods) that are broken now. Not that much actually but it would take someone with some patience to fix the broken parts to get it up and running

Falloutbabe

Falloutbabe

Posted
  • Author
Posted

Yesterday I even started a trial run and am pleasantly surprised at how smooth everything runs so far. A big compliment to all the modernists whose work I can enjoy now.

However, I've also noticed how so many tasks Mod excludes other mods. I will here again must set off to cause too much chaos in the life story of my courier. ;)

Personal wish would be that it did give more mods with German translation. Perhaps it would be possible to send me English original texts so that they can be translated and sent back to be entered by the modernists. The effort which I can not judge, unfortunately, since I behind not versed with the procedures.

PS: Even if my English is not so special, so I know but a few people who could take over this. Do I just knock softly.)

Odessa

Odessa

Posted
Posted

Ich mochte meine Soliciting spieler, mit der Deutsche sprochen!

 

Aber leider, Ich kanne Deutsche sprochen nicht sehr gut... :blush:

Falloutbabe

Falloutbabe

Posted
  • Author
Posted

Sorry, one more question.

 


Spunk needs NVSE 4.6.2, NX 15, and SexoutNG 2.8.90b1. Quitting the game.

 

 

I SexoutNG 02/09/92 (where one indeed gets the message that it has been updated is in FOMM but not displayed as active. Active would SexoutNG 93b 10) and nvse_4_6 beta 3 and NX16.

 

fehlerPJCA0.jpg

 

What it fails now?


P.S .:
Perhaps I should rename the thread in question Falloutbabe's thread.

Falloutbabe

Falloutbabe

Posted
  • Author
Posted

Hi. I followed the link and have the NVSE 5.0 Beta 1 (https: //www.dropbox....-beta-1.7z dl = 0) installed. However, I get the same error message when Spunk.
Is Spunk active, complains Pregnancy V3 and FNV crashes. I disable Spunk, it is running the game, but it is missing some content that just need Spunk.

In the description of the Spunk I have found nothing that indicates a conflict with another installed Mod. For the 47 pages forum Spunk, lacks unfortunately again on my English.

Odessa

Odessa

Posted
Posted

Open the console in game and enter:

 

GetNVSEVersion

 

If it does not return '5' then you haven't installed the NVSE beta properly, if it does, try

 

NX_GetVersion

 

If it does not return '16', you haven't installed NX properly, if it does, you haven't installed Sexout '90+ properly, it should print its version to the console on game load.

Falloutbabe

Falloutbabe

Posted
  • Author
Posted

With the Console commands I have come to the following conclusion:

NVSE 4
NX 16

I have reactivated NVSE 4. ... although inactive now deinstaliert and 5.beta. A renewed test revealed that continue NVSE 4 is active.

Then I re-recorded the clean FNV.Data and only all mods for NX; NVSE, 4GB ect, installed without installing any Sexout or performance mods. Result:
NVSE 4
NX 16

After I manually beta5 not installed and via FOMM, he now recognizes even with Release 5.
So now I have NVSE5 and NX 16. Unfortunately, appeared like the next problem.
Sexout Assault is no longer detected in the MCM and designated as not initialized. Again there was a reactivation via FOMM and after this has produced no effect, a manual installation.
According console Assault is installed, but to assault you can not configure the MCM.
Finally, I noticed a small line of text. "Enter the Wasteland".
So the end of the conversation with Doc Mitchell, out into the sunshine and behold, Assault can be activated.

Conclusion:

Thanks for the help, but at night at 02:00 clock and after 4 glass of wine, I should no longer put on the configuration of FNV me.

  • 3 months later...
Falloutbabe

Falloutbabe

Posted
  • Author
Posted

Hiho, I again. ;)

I'll always play only at certain times and then got back to the longer breaks. Now it is time again that I've encountered at the start of FNV a problem.
I know I had this problem once before, but unfortunately I do not remember how I had solved it. In any case, it was also have been possible at that time only by rigorous tasting.

Following problem:  screenshot910GI20.jpg

But if I want to reinstall the Visual C ++, says my system that I have been playing a current version. I also played shortly with the user settings (UAC's), but I was unsuccessful.

Would be nice if you could give me some advice on how I can solve this problem best. Loaded the master file of the MCM, bugfix 2 and the German translation of MCM. All of the Nexus page http://www.nexusmods.com/newvegas/mods/42507/?

MfG Falloutbabe

 

PS: I did not want new page open, and have therefore laid digs the old thread again, even if the title is not quite appropriate. One may forgive me. ;)

 

  Addendum:  

And a version problem. In the game, I get the following message:

screenshot92CSDES.jpg

Same error message regarding the SCR version I get again from Breeder. However, according FOMM precisely those required version is installed.
(SexoutCommonResources-20150809.1.zip).
Shown in the screenshot Version 20150716.0 I have however not found on my system, since I did not gespiet the time of realization FNV and have therefore made no update of mods .. It exists in FOMM but still SexoutCommonResourcesData-20140712.7z. Optionally, however, activation / deactivation brought no changes and the original error message persists.

 

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

 

Hiho, ich mal wieder.  ;)

Ich komme ja immer nur zu bestimmten Zeiten zum spielen und hab dann wieder längere Pausen. Nun ist es mal wieder soweit, dass ich beim Start von FNV auf ein Problem gestoßen bin.
Ich weiß, ich hatte dieses Problem schon früher einmal, doch leider weiß ich nicht mehr, wie ich es gelöst hatte. Auf alle Fälle war es auch damals nur durch rigoroses Probieren möglich gewesen.

Folgendes Problem:

Wenn ich die Visual C++ nun aber neu installieren will, sagt mir mein System, dass ich eine aktuelle Version aufgespielt habe. Ich habe auch schon kurz mit den Benutzereinstellungen (UAC's) gespielt, doch kam ich zu keinem Erfolg.

Wäre nett, wenn ihr mir einen Rat geben könntet, wie ich dieses Problem am besten lösen kann. Geladen wurde die Masterdatei des MCM, Bugfix 2 und die deutsche Übersetzung des MCM. Alles von der Nexus-Seite http://www.nexusmods.com/newvegas/mods/42507/?

MfG Falloutbabe

P.S: Ich wollte keine neue Seite aufmachen, und habe daher den alten Thread wieder vorgekramt, auch wenn die Überschrift nicht ganz passend ist. Man möge es mir nachsehen.  ;)

 

Nachtrag:

Und noch ein Versionsproblem. Im Spiel bekomme ich folgende Meldung:


Gleiche Fehlermeldung bezüglich der SCR-Version bekomme ich auch nochmal vom Breeder. Allerdings ist laut FOMM eben jene geforderte Version installiert.
(SexoutCommonResources-20150809.1.zip).
Die im Screenshot angezeigte Version 20150716.0 habe ich hingegen nicht auf meinem System gefunden, zumal ich zum Zeitpunkt der Realisierung FNV nicht gespiet habe und somit auch keine Aktualisierung der Mods vorgenommen habe.. Es existiert im FOMM jedoch noch die SexoutCommonResourcesData-20140712.7z. Wahlweise Aktivierung/Deaktivierung brachten jedoch keine Veränderungen und die ursprüngliche Fehlermeldung bleibt bestehen.

Falloutbabe

Falloutbabe

Posted
  • Author
Posted

Is there perhaps something on the load order that I should after the updates from MCM, NVSE, CASM and note the like?

Currently I invite only MCM and then CASM.
NVSE_5_0_beta2, NVSE Extender Version 16, NVAC 7.2.1.0 and UIO 1:31 are also installed, but you can not even move there the load order. The problem remains as to whether I should install the latter in a certain order.

(PS: As always, the Google translator was used.)

RitualClarity

RitualClarity

Posted
Posted

Run Loot, If it runs good and you still suspect a problem, run FNVedit. Repair / move anything it suggest to get a clean report (finished loading in FNVedit) and your load order should be fine. Might be that your entire install is corrupted.

 

I have to ask. This is a legitimate version of Fallout NV from your country? Please don't take offense to the question  :) Many times pirated versions don't play well with the various mods mainly HUD and Script extenders. If it is legitimate, it might be something with your language version that is conflicting. In the past there were some minor issues with different language versions but never this bad so I don't think this is the case.

 

As I stated before I can't even begin to figure out the issue. Perhaps a new fresh install is in order? Just the main core mods for Sexout following Bruce Waynes tutorial. Test with Sexkey for simple verification it works. Your Huds and everything should work fine with a fresh install and only the base core requirements for Sexout installed. Might just be something left over from a previous mod removal. Random script or something.

Falloutbabe

Falloutbabe

Posted
  • Author
Posted

The game is a legitimate import from Austria, since it is not censored in German from there.
The last time I played it for about 3 months ago, was far also all right, even if I had to repeatedly take the Forums help to complete at that time.
But now, after you upgrade individual components of Sexout, it comes to these issues.
It will probably be when I uninstall the game completely and again reinstall best. Would be great if I could be sure helped with a working load order when it comes to the Nexus Mods.

So far I had only the Nexus Mods installed (FOMM, FNSE, NVAC, CASM, MCM, centered 3rd camera, Flora Overhaul, Populated Casino / Wasteland, three weapon mods, four clothing mods, beware of girl 3, Save Cass, more perks, no degradation), before I started to install the Sexout mods.
In the descriptions indeed enough requirements and charging orders are often attached genes. This I have also tried to comply, but can this well-updates of individual mods have moved. If at least my guess.

P: S: Please forgive me error. As always, the Google translator is used.)

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Das Spiel ist ein legitimer Import aus Österreich, da es von dort deutschsprachig und nicht zensiert ist.
Das letzte Mal, als ich es vor ca 3 Monaten spielte, war soweit auch alles in Ordnung, auch wenn ich damals schon mehrmals die Forenhilfe in Anspruch nehmen musste.
Nun aber, nach Aktualisierung einzelner Komponenten des Sexout, kommt es zu diesen Problemen.
Am besten wird es wohl sein, wenn ich das Spiel komplett deinstalliere und nochmals neu installiere. Wäre super, wenn mir dafür mit einer funktionierenden Ladereihenfolge weitergeholfen werden könnte, was auch die Nexus-Mods angeht.

Bisher hatte ich erst die Nexus-Mods installiert (FOMM, FNSE, NVAC, CASM, MCM, centered 3rd camera, Flora Overhaul, Populated Casino/Wasteland, drei Waffen-Mods, vier Kleidungs-Mods, beware of girl 3, save Cass, more perks, no degradation), bevor ich begann, die Sexout-Mods zu installieren.
In den Beschreibungen sind ja oft genug Erfordernisse und Ladereihenfolgen angegenen. Dies habe ich auch versucht einzuhalten, doch durch Aktualisierungen einzelner Mods kann sich diese wohl verschoben haben. Ist zumindest meine Vermutung.

P:S: Man möge mir Fehler verzeihen. Wie immer wird der Google-Übersetzer genutzt.)

RitualClarity

RitualClarity

Posted
Posted

 

The last time I played it for about 3 months ago, was far also all right, even if I had to repeatedly take the Forums help to complete at that time.

But now, after you upgrade individual components of Sexout, it comes to these issues.

A recent updated caused your previously working game to break like this? If so I would post the issue on that mods thread. Might be something recently done. Also refresh the download from that mod. Might have been corrupted or the author made a silent update to fix an issue. (not sure from the translation if you tried that already. )

 

You have a light load order. I would work with only sexout mods and see if that works. Might just be a mod don't like one of those other mods. I never used centered 3rd camera, Flora Overhaul,Save Cass, more perks, I have used many of the others. I agree with you that it is strange it happens after Sexout mods installed. Does it continue after they are removed?

 

I am trying to follow the translations but sometimes it is confusing. So forgive me if I seem to miss a point. :).

Nickolos1818

Nickolos1818

Posted
Posted

For the MCM problem, grab Unified Hud from Nexus, let it run and detect all ui mod's you have, also let it override when asked.

 

For the SCR problem I would suggest completely removing your current install of SCR, SexoutNGl, Pregnancy/Offspring.  Delete any trace/log files from NMM or FOMM folders.  Go grab the current ones of those mods ( yes even if you already had the updated versions ).   Reinstall those.

 

Next, don't load a previous save start a new game.  Let it load up do your character creation and leave Doc's house.  Once outside let it pop up any menus it needs to giving you notifications of certain mods, dlc's.  

 

If you still have that problem with SCR's updated version not being detected, come back here and post your load order and a debug dump for us to look at.  Hopefully though starting a new game may fix the issue for you.

Falloutbabe

Falloutbabe

Posted
  • Author
Posted

Hiho!

So, now I have disabled all mods on this site and some even deleted. One problem I still have with the MCM (http://www.nexusmods.com/newvegas/mods/42507/?), which I would like to clarify it before I go on

According to the description he requires:
 

  • Requirements
  •      Fallout New Vegas
  •      Microsoft Visual C ++ 2010 Redistributable Package (x86)
  •      New Vegas Script Extender (NVSE) 2.0 beta 3 or higher
  •      Fallout Mod Nexus Mod Manager or Manager for installer

Problem is the Microsoft Visual C ++ 2010 Redistributable Package (x86). Following the link to install it, I get during the installation the following error message:
 

  • Resolve the following problem:
  • On the computer a newer version of Microsoft Visual C ++ 2010 redistributable was found.

Is there a newer version of the MCM, as this is currently to be found on Nexus, or I have to cheat anyway, so I can install the required package outdated?

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Hiho!

So, ich habe nun alle Mods von dieser Seite deaktiviert und teilweise sogar gelöscht. Ein Problem habe ich noch immer mit dem MCM (http://www.nexusmods.com/newvegas/mods/42507/?), welches ich erst klären möchte, bevor ich weitermache.



Laut Beschreibung benötigt er folgendes:
 

  • Requirements
  •     Fallout New Vegas
  •     Microsoft Visual C++ 2010 Redistributable Package (x86)
  •     New Vegas Script Extender (NVSE) 2.0 beta 3 or higher
  •     Fallout Mod Manager or Nexus Mod Manager for installer

Problem ist das Microsoft Visual C++ 2010 Redistributable Package (x86). Folge ich dem Link um es zu installieren, bekomme ich bei der Installation folgende Fehlermeldung:
 

  • Beheben Sie das folgende Problem:
  • Auf dem Computer wurde eine neuere Version von Microsoft Visual C++ 2010 Redistributable gefunden.

Gibt es eine neuere Version des MCM, als diese aktuell auf Nexus zu finden ist, oder muss ich irgendwie tricksen, damit ich das geforderte veraltete Paket installieren kann?

Falloutbabe

Falloutbabe

Posted
  • Author
Posted

Somehow I have now the game completely shot to pieces me. So now occurred several graphical errors and the character models were no longer my chosen Mods. I have now uninstalled the game, delete all subfolders and will begin the installation.
First, of course, the game itself including addons Dead Money, Honest Hearts, Old World Blues, Lonesome Road and 5 Itempacks (classical, mercenaries, Tribal, Caravan, Gun Runner).
After that FOMM is installed. When this is done, I would like to install the following Nexus Mods:
 

Later are still mods follow as:

Up to this point everything should run without problems. But now comes the point where it hooks because now following mods would wan the series:

Other requests were:

Now it comes to the personal part. So bodymod floats me DIMONIZED TYPE3 female body (http://www.nexusmods.com/fallout3/mods/4280/?). However, the Fallout 3 and not for NV. However, some mods refer to precisely this bodymod in Fallout 3 Forum. To but would like the Type6 clothes such as (http://www.nexusmods.com/newvegas/mods/54379/?).

 

Are noticed any mistakes so far? So mods that are mutually exclusive, or which cause the bottom line one and the same, I look at it so it can save the installation when?

 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
Irgendwie hab ich mir nun das Spiel komplett zerschossen. So traten nun diverse Grafikfehler auf und auch die Charaktermodelle entsprachen nicht mehr meinen gewählten Mods. Ich habe das Spiel nun deinstalliert, sämtliche Unterordner gelöscht und werde mit der Neuinstallation beginnen.
Als erstes natürlich das Spiel an sich inklusive der Erweiterungen Dead Money, Honest Hearts, Old World Blues, Lonesome Road und der 5 Itempacks (Klassik, Söldner, Tribal, Karawane, Gun-Runner).
Danach wird dann FOMM installiert. Wenn dies geschehen ist, beabsichtige ich folgende Nexus-Mods zu installieren:
Später sollen dann noch Mods folgen wie:
Bis hierhin dürfte alles ohne Probleme laufen. Nun kommt aber die Stelle, an der es hakt, denn nun wären folgende Mods wan der Reihe:
Weitere Wünsche wären:
Jetzt kommt es zum persönlichen Teil. Also Bodymod schwebt mir DIMONIZED TYPE3 female body (http://www.nexusmods.com/fallout3/mods/4280/?) vor. Allerdings ist der für Fallout 3 und nicht für NV. Allerdings verwiesen einige Mods auf eben dieses Bodymod im Fallout 3 Forum.Dazu hätte ich aber gern die Type6 Klamotten wie etwa (http://www.nexusmods.com/newvegas/mods/54379/?).

Sind bis jetzt irgendwelche Fehler aufgefallen? Also Mods, die sich gegenseitig ausschließen, oder die unterm Strich ein und das selbe bewirken, ich mir bei einem davon also die Installation sparen kann?

 

RitualClarity

RitualClarity

Posted
Posted

 

Is there a newer version of the MCM, as this is currently to be found on Nexus, or I have to cheat anyway, so I can install the required package outdated?

Should be backwards compatible. I  am pretty sure I have newer versions of the requirement and I have no problem with getting the MCM to work.

 

AS for your mods you are using. I haven't used most of those at all so I can't even begin to comment. I did however see these used in many others load orders. Not sure how well they worked or can remember if they were used together.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...