Jump to content

Recommended Posts

View File

RKA Body

 

2.1 changes:

Mirrored body to make it symmetrical and re-unwrapped it to minimize texture stretching (waistline retains its asymmetry).

 

Main body now uses standard HGEC hands and feet (with Roberts' Feet as an option).

 

Optional upper body with support for Smaller hands by Geechan:

http://www.nexusmods.com/oblivion/mods/38213/?

 

Seamless neckline (barring texture seams).

 

Re-weighted BBB and added butt bounce (OP3).

 

Optional non OP3 versions.

Tweaked weighting around the knees.

 

Credits:

Unknown?? - original RKA armor author.

DixiePig and AnnaFly for the requests.

Thanks to Gerra6 for the Blender scripts.

Thanks to LoversLab for hosting.


 

Link to comment

Greetings.

 

 Hi & @ Samhain6

 

Thank you.

 

Please give us a link to the "RKA armour" ... i cannot found it with my "poor" search engine  ( IE8 Bing "live search" ) .

Another question about the Geechan 's Smaller Hands : witch one ?

Last question ( about the Geechan's Smaller hands too) : do i need a special Skeleton to use them ? This is just because with my last attemps ( since a few months) i'm not sure those hands are "really "smaller ... sometime it seams they look like a "Spriggan distorted hand" ... not sure in fact , may be this is just  occur with some animations ???

 

I use the "Deedee's Skeleton " ( from Electrro Body Spell mod) or the LAPF Skeleton but with this last one it seams there is sometime a "problem" with the sitting idle ( when an NPC or the player use the Real HighHeels System Shoes ( i use the VipCxj stting idle of course)  or not ...  ... yes "or not"  , that's strange !  

 

Cheers.

Link to comment

@AnnaFly

 

Try this search bar instead. I wiped bing off of my computer the first time I saw it as it reminded me of malaware/spyware/virus as it would always direct you to crap you were not searching for.

 

https://ixquick.com

 

I saw posts on the armor awhile back maybe in the what mod is it thread.

 

*Edit 

 

Yeap it was posted in the what mod is it thread click samhain6 username and go to their profile and click posts. That armor I believe I have seen posted here a few times and I think it is also on the up.minty.com site. 

 

 

Link to comment

@AnnaFly

 

Try this search bar instead. I wiped bing off of my computer the first time I saw it as it reminded me of malaware/spyware/virus as it would always direct you to crap you were not searching for.

 

https://ixquick.com

 

I saw posts on the armor awhile back maybe in the what mod is it thread.

 

*Edit 

 

Yeap it was posted in the what mod is it thread click samhain6 username and go to their profile and click posts. That armor I believe I have seen posted here a few times and I think it is also on the up.minty.com site. 

Bonjour.

 

Merci beaucoup, mais ceci étant , "Bing" est parfait pour les articles "techniques" tels ceux de Microsoft TechNet ( ou MSDN) ... pour le reste c'est une autre histoire.

 

Oupsss... sooorrry ... english version :

 

Hi there.

 

Thank you Myuhinny , but ,  by the way "Bing" search engine is "perfect" but only for some technical articles/posts like thoose from Microsoft TechNet or MSDN ( take a look at the Microsoft TechNet library... or MSDN ) .

 

Well it's not better with your link , don't worry we will found it in a few "hours" ... ;°).

 

I didn't found anything  by looking at the Samhain6 profil ( no more on  That site Over There ...)  time to test the Gerra6's New Clothing body style Converter  with this new body ...

 

I'll investigate !

 

Cheers.

 

PS : i found this one ( thanks to Poontank) " Soka" armor , is it the one supposed to be the "RKA" armor/armour ?

 

 

http://www.mediafire.com/download/mmu3wm8dmnk4lqg/Soka.rar

 

PPS : ok i found it .. in the "posts" section ( as you said) ... and not in the "topics" section where i was looking for ...unfortunatly there is only one picture without any link but thank you!

 

Link to comment

Not the Soka armor.

RKA armor, the armor in this post http://www.loverslab.com/topic/15065-what-mod-is-this/page-97?do=findComment&comment=787672

http://up.mnty.net/img/up002393.7z  only meshes and textures no esp

Requires Vipcxjs Real High Heels

Greetings.

 

Fejeena , un grand merci !

 

Big thanks for this file.

 

Now i remember I got it somewhere  ... probably here on LL , i already saw these two pictures included in the ".7z" file ( Screen Shots 33201 & 35435).

 

Anyway , thank you one more time.

 

Cheers.

Link to comment

I started looking for the one that I downloaded from up.minty found it in a folder and saw that I never got around to converting it to the TGND body so I fixed that and now the RKA armor set that I have is now TGND. Now to dig around some and see what else I have missed.

Link to comment

I started looking for the one that I downloaded from up.minty found it in a folder and saw that I never got around to converting it to the TGND body so I fixed that and now the RKA armor set that I have is now TGND. Now to dig around some and see what else I have missed.

Greetings.

 

 Hi Myuhinny .

 

And ? ... do you share it with us , here on LL of course ( the week-end it is very difficult to download something from "That Site Over There" actually) ?

 

I'm not a "fan" of Big Booted bodies ( and my boyfriend too) , usualy i use top from AA to F cup ( F-cup is the one i prefer , not for the size , but for "the look" , i think this one is very well done .)

 

For the lower i use some mix between HGEC 1.1 ( like most of the Colourwheel's mods)  and EBE ( i like these leg more "bulky" from EBE lower and this why why i think the RKA lower ( legs)  is "interesting" ).

 

ZKEC and TGND are also very well "welcome".

 

Good afternoon .

Cheers.

 

PS : another "interresting" body is the one from GSBmodders ( from the " Sheva Tribal " if i remember well) .

There was also the "Perfect Slut " ( but for the lower only) or the FCPA (by HappySparkles) .

 

 

Link to comment

The TGND body can be found in setbody reloaded mod by Gerra6 and movomo found here on LL no need to download that huge TGND mod from the nexus. http://www.loverslab.com/topic/13908-gerra-and-movomos-setbody-reloaded/ the bodies in the setbody reloaded one have had many of the body meshes and UV maps in it fixed and they work better for most armor conversions. 

 

The one problem you will face with going from flabby patties to smaller or smaller to flabby patties is that there will be stretching between the breast that area I call no mans land things that get caught in there tend to come out warped/distorted there will also be stretching below the breasts as well. 

 

RKA uses a weird body I usually try to change out bodies like that for a better one but there is no DRMA version of it that doesn't have the breast smooshed together like that. Smooshed breast like that cause a mesh problem between the breast. 

 

post-25667-0-81269200-1400950899_thumb.jpgpost-25667-0-13912100-1400951018_thumb.jpg Might be able to replace the converted body with the TGND template body but the armors don't always convert right down to the T so there is clipping.

 

I actually just threw the sheva outfit into the converter last night. It has clipping in spots and warpage in other spots.

post-25667-0-52502500-1400951268_thumb.jpgpost-25667-0-82278700-1400951375_thumb.jpg

 

Link to comment

Hi there.

 

Thank you Myuhinny , i will comme back in a few hours after testing the 085.A version of the Gerra6 's tool.

 

Never tried it for Oblivion , in fact i only tried the version 0.72 only one time and for Skyrim  ( with the gerra6 lattice and not mine ) ...

 

I will not use the TGND body parts from " Set Body reloaded" because as i understand this one correct the "primitive" defaut of the HGEC body ( the no symetrical parts ) ... and i already got all the TGND files ( from "That site Over There" of course ) .

 

If i can obtain a good result il will send you in a PM ( i suppose it's better to not put it here , because this is a little "out of the initial topic" ).

 

So long.

 

Cheers.

 

PS : by the way i 'll also try to make a conversion from an  HGEC  Outfit to  the RKA body ( with Geechan hands and with some "rings" just to see if they would be converted in the "right" places ... on the fingers , of course ) .

 

PPS : the RKA upper body is a little bigger ( i 'm talking about the "boobs" of course) than the one from SpeedBuster 's "Bodycon" mod  ....

 

PPPS : which TGND do you use ? Perky or Standard ?

 

Edit ( 24-05-2014  22:08 ) : @ Myuhinni : i sent you a second test , "strange result" it looks like a mix between the RKA lower and a smaller "boobs" but not exactly "TGND" !

 

@ Gerra6 : you 've made a very  " interresting "tool with your converter 0.85A ... big thanks for this.

 

Edit 2 to Myuhinny : i sent you a third MP with a mix between my first attempt and the second one ( i just keep the "collar from the second test to replace the one from the first test ... it looks good now ! ) Bye i must go to sleep.

 

Here is the third file i've sent to you :

 

 

SkeletonLAPF_&_RKA+TGND mix test 1&2.nif

Link to comment

Greetings.

 

First , big thanks to Samhain6 for this body.

Secondly, big thanks too to Gerra6 for is incredible clothing converter ... perfect for lazzy person like me .... .°)

 

Third , just a little "contribution" to this  "new" body , a  convertion i made today ( not perfect ... ) with the Gerra6 Clothing converter .

 

And thanks to Myuhinny who give me the idea of using this converter by speaking about a convertion of the RKA armor he forgot to made for the TGND body.

 

Cheers .... Sexy Mithrill for "the Perverts" . This is just a simple test and a sample "Nif" file with the LAPF Skeleton included.

 

NB : i forgot another " little thing "( thanks to KingKong this time) : Lucy Heartfilla RKA version of course and a second nif but with a short boots model ( sorry i don't know from witch mod i got thes shoes ... probably here from one "Tera" link...) .

 

... for the "Lucy " texture you need to go here ... kingKong's  post 1404 :

 

http://www.loverslab.com/topic/955-is-there-a-mod-that-and-requests-thread/page-71?do=findComment&comment=796964

 

Edit ( 1-11-2014  08:00 ) : a NifSkope screenshot of the "Sexy Mithril 4 the perverts " .

RKA-Sexy Mithrill for the perverts.nif

Lucy Heartfilla RKA-ULHF.nif

Lucy Heartfilla RKA-ULH-F.nif

post-239275-0-95000300-1414825213_thumb.jpg

Link to comment

Sorry about the late reply and thanks for the interest.

 

Geechan's hands will be in the root of the "Full Package" download (the other named folders are upperbodies that are modified to work with the hands).

 

As far as skeletons I've always used the "controllable" version from here (extra LAPF bones can be added for compatibility):

http://oblivion.nexusmods.com/mods/40739

 

If there are any hand problems just let me know and I can always make a standard HGEC hand version if desired.

 

Link to comment

Sorry about the late reply and thanks for the interest.

 

Geechan's hands will be in the root of the "Full Package" download (the other named folders are upperbodies that are modified to work with the hands).

 

As far as skeletons I've always used the "controllable" version from here (extra LAPF bones can be added for compatibility):

http://oblivion.nexusmods.com/mods/40739

 

If there are any hand problems just let me know and I can always make a standard HGEC hand version if desired.

Hi there.

 

Hello Samhain6 , one more time , big thanks for sharing this "new" body with us. No reason to be sorry.

 

I've tried yesterday the version 0.85a  of Gerra6's Clothing Converter , first time for Oblivion oufits and i think it's a great tool for a people who doesn't want to "play" with Blender ( or Photoshop, 3DS max etc ...) ... sorry if i doing wrong by posting these "tests" under your "support topic section" without asking you first if i could or not .

 

I also forgot to give the right crefits to Andrew0Red from wicth i convert that "Naughty Mithrill Armor ... for "the Perverts" ...( i know that because i already add something as a description in the nif file ) but i don't have any link to the original file ( i 've downloaded it a long time ago at "That Site Over There " ...  at a time when i was "playing" with the old "Moving Breast system" and when i was searching for clothes compatible with this one ...).

 

The lower part of the RKA body looks like something between "EBE" and a lower from "Oppai" in my opinion. My boyfriend is already "crazy" about this lower i'm affraid he ask me to convert all the "5872 outfits"  from the Oblivion's Armor/clothe folders ... 5872 , sure i'm joking ...  but as the Gerra6 tool can convert a full folder at once, why not ??? ... ;°)  

 

Sure this is not so well done as with a tool like Blender , but honestly user don't need to do " a lot off " things to get a converted outfit with his tool ( once the lattice was generated) . 

 

By the way , no problem with the hand , because i already use "ZKEC 1.1 hands" on my testing machine . I think they are the same as the "Geechan's smaller hands" .

 

The only real problem with "Smaller Hands" is with the rings ... a ring made for HGEC ( or Exnem) don't match ( fit) the fingers from "smaller hands".

 

I let a right/ring in the nif mesh of the "Lucy HearFilla ( not writting "HeartFilia"  ) file. This is just a right putting threr in my game to be sure the NPC or the player is "equiped" with a "smaller hands" ... sometime they look like something not really "smaller" , i don't know why . 

 

Cheers.

Link to comment
Hi there.

 

 

 

... sorry if i doing wrong by posting these "tests" under your "support topic section" without asking you first if i could or not .

 

 

 

Hi, no problem - feel free to post anything related to the body here.

Link to comment

 

Hi there.

 

 

 

... sorry if i doing wrong by posting these "tests" under your "support topic section" without asking you first if i could or not .

 

 

 

Hi, no problem - feel free to post anything related to the body here.

 

Greetings.

 

Hi Samhain6

 

So thank you.

 

Here it is a "gift" just  " For Your Eys Only " ... if i'm right , you like "bulky" females ...  here you will find an "accidently made " bulky RKA armor ( with Gerra6 085a Clothings Converter  )... probably from a mismatch between my "From,To,Target" folder ...  ( remove the Gear/boots part and  you'll see these legs are really "bulky" the "boobs" need a litlle tweak with NifSkope ...)

 

I found it in a full folder i wanted to convert ( the other conversions look good but made from Colourwheel's outfits with real high heels) ...

 

I will try with some "Hentai/ Zotman12"  now, as i understand they are "public" meshes now ... i 'll read the credits section first before posting something in your thread.

 

Cheers.

 

NB : if i still do some mystake like this one it would be an "Alien" body the next time  ... it already is ... in my opinion but i'm not a fan of "Bulky" bodies ( even male ) . 

 

PS : wouaw the Gerra6' tool works very well with the lower parts of Colourwheel's clothes and your RKA body. ... and even her "surgical cutted High Heels" look well ( or no so bad if you prefer ...)  once converted to the RKA lower ... really if you want i 'll PM you a converted model.

 

I wiil post a screenshot as soon as possible from "in game" ... i'm waitnig the end of a whole folder conversion.

 

PPS :

In my opinion it would better with a little more polygons on top of calves to soften their appearance.
 
Edit : well  i've posted some pictures ... converted to your RKA lower , i think Colourwheel's " cutted Heels" look ... " Sexy " ( normal from Colourwheel...)   I don't use Antialeasing or FFXA  when i take some sreen shots.
 
Edit 2 : just a  NifSkope screenshot of the " Accidental Bulky Version"  ... like this you would know what you are dowloading ! 

SkeletonLAPF_&_RKA+Armor but Bulky by accident.nif

post-239275-0-79055700-1401381340_thumb.jpg

post-239275-0-42694400-1401381361_thumb.jpg

post-239275-0-03626600-1401381371_thumb.jpg

post-239275-0-70847600-1401381381_thumb.jpg

post-239275-0-39736400-1401381390_thumb.jpg

post-239275-0-97430100-1401381472_thumb.jpg

post-239275-0-67108300-1401381479_thumb.jpg

post-239275-0-17437400-1414826057_thumb.jpg

Link to comment
  • 10 months later...

Greetings

 

Hi & @ Samhain6

 

Do you intend to add  an " Official" version "  at " That Site Over There " too  ?

 

It's impossible to link something from " That Site " to LL without  getting some  probable " issues "   ...

 

I'm working on the GBEC body actually , but i have some projects for your RKA body too ( i like le legs , and especially the " calves" so , i've decided to make this body more " popular  " ) and also for the HappySparkles FCPA  body - Flat Edition ( not excatly your " taste" as i suppose ... and now the last ( not yet " Official " ) OldWolf58 's body " New HGEC ( Sort of ...) " .

 

So if you decide to " officialise "  it  at the Nexus , please let us now .

 

Cheers.

 

Edit : if you decide to officialise your RKA body , is it possible to add a version HGEC " Standard " compatible - so compatible with HGEC Hands and Feet ( RAAiAR version , not the Coronerra version ) .

 

If you 've no time to modify your already existing version , it's easy to convert it to HGEC " Standard " ( Hands & feet ) and i can do it easily " , but i prefer working on an " Official" version created by the Creator  , it's better .

 

Sure i 'will send you the modified nifs first ( via PM )  , logic .

 

Bye.

 

PS  ( vendredi 10 Avril 2015 ) : in fact i intend to rework your reworked arms to match/fit the little hands from OldWolf58 , they are HGEC " standard " compatible ( so compatible with the RAIAR version and Exnem of course )  , no need a special upperbody to avoid  a " crater " between the hands and the arms. 

 

And , of course as an " alternative "  option .

Link to comment

 

 

Greetings

 

Hi & @ Samhain6

 

Do you intend to add  an " Official" version "  at " That Site Over There " too  ?

 

It's impossible to link something from " That Site " to LL without  getting some  probable " issues "   ...

 

I'm working on the GBEC body actually , but i have some projects for your RKA body too ( i like le legs , and especially the " calves" so , i've decided to make this body more " popular  " ) and also for the HappySparkles FCPA  body - Flat Edition ( not excatly your " taste" as i suppose ... and now the last ( not yet " Official " ) OldWolf58 's body " New HGEC ( Sort of ...) " .

 

So if you decide to " officialise "  it  at the Nexus , please let us now .

 

Cheers.

 

Edit : if you decide to officialise your RKA body , is it possible to add a version HGEC " Standard " compatible - so compatible with HGEC Hands and Feet ( RAAiAR version , not the Coronerra version ) .

 

If you 've no time to modify your already existing version , it's easy to convert it to HGEC " Standard " ( Hands & feet ) and i can do it easily " , but i prefer working on an " Official" version created by the Creator  , it's better .

 

Sure i 'will send you the modified nifs first ( via PM )  , logic .

 

Bye.

 

PS  ( vendredi 10 Avril 2015 ) : in fact i intend to rework your reworked arms to match/fit the little hands from OldWolf58 , they are HGEC " standard " compatible ( so compatible with the RAIAR version and Exnem of course )  , no need a special upperbody to avoid  a " crater " between the hands and the arms. 

 

And , of course as an " alternative "  option .

 

 

I hope to have a new version out this weekend.  I have the wrists matched up with RAIAR HGEC and I've mirrored the body to make it symmetrical.  Double checking the weighting at this time and looking to re-unwrap it to minimize texture stretching.

Link to comment

 

 

 

Greetings

 

Hi & @ Samhain6

 

Do you intend to add  an " Official" version "  at " That Site Over There " too  ?

 

It's impossible to link something from " That Site " to LL without  getting some  probable " issues "   ...

 

I'm working on the GBEC body actually , but i have some projects for your RKA body too ( i like le legs , and especially the " calves" so , i've decided to make this body more " popular  " ) and also for the HappySparkles FCPA  body - Flat Edition ( not excatly your " taste" as i suppose ... and now the last ( not yet " Official " ) OldWolf58 's body " New HGEC ( Sort of ...) " .

 

So if you decide to " officialise "  it  at the Nexus , please let us now .

 

Cheers.

 

Edit : if you decide to officialise your RKA body , is it possible to add a version HGEC " Standard " compatible - so compatible with HGEC Hands and Feet ( RAAiAR version , not the Coronerra version ) .

 

If you 've no time to modify your already existing version , it's easy to convert it to HGEC " Standard " ( Hands & feet ) and i can do it easily " , but i prefer working on an " Official" version created by the Creator  , it's better .

 

Sure i 'will send you the modified nifs first ( via PM )  , logic .

 

Bye.

 

PS  ( vendredi 10 Avril 2015 ) : in fact i intend to rework your reworked arms to match/fit the little hands from OldWolf58 , they are HGEC " standard " compatible ( so compatible with the RAIAR version and Exnem of course )  , no need a special upperbody to avoid  a " crater " between the hands and the arms. 

 

And , of course as an " alternative "  option .

 

 

I hope to have a new version out this weekend.  I have the wrists matched up with RAIAR HGEC and I've mirrored the body to make it symmetrical.  Double checking the weighting at this time and looking to re-unwrap it to minimize texture stretching.

 

Grretings.

 

 Hi  & @ Samhain6 ,

 

OMG ! ...K 'not wait ...  )

 

...  i'm joking of course.

 

 Cool. And will you upload it at the Nexus as an Official new HGEC body ?

 

...  " double checking the weighting "  what do you mean ? Would it be something like the weighting from the Setbody reloaded Blockhead Edidion 1.45/120 Gerra6-Movomo ?  

 

These weighting this in the  " Setblody Reloaded etc ...  " is very different from the " usual weighting " you can find in most of the older mods ... ( based on Saaya-Coronerra " recommandations" )  ... so for " auto-magical convertions " , it's more easy and better to not use the pre-weighted meshes from  " Setbody Reloaded etc ...  "  , but that's just my point of view , the point of view of a " lazy " person ... ;°)

 

... and only symmetrical ?

 

I will prabably not use it in a symmetrical version , but don't " worried" i 'm able to make it "asymmetric" quicly .... ;°)

... so that's just for compatibility reasons ... with the Gerra6's converter .

 

I can use ( but don't like ) a symmetrical upper with an asymmetrical lower , but i avoid this when possible .

 

 

Anyway , i will keep your existing version ... for my personal uses ... because i already did some convertions for my onw uses ( family uses) .

 

PS :   the pre-weighted meshes in " SetBody Reloaded Blockhead Edition 1.45/1.20 " ... et apatati et patata ... look like done for the "old " MovingBreast's  system  ... ( and move more like the MovingBreat system ) and not as the BBB " effect "   mostly popularised by Saaya, Saaya's Team or " Saaya's Team and " Friends" ... .

 

 

Link to comment

 

 

 

 

Greetings

 

Hi & @ Samhain6

 

Do you intend to add  an " Official" version "  at " That Site Over There " too  ?

 

It's impossible to link something from " That Site " to LL without  getting some  probable " issues "   ...

 

I'm working on the GBEC body actually , but i have some projects for your RKA body too ( i like le legs , and especially the " calves" so , i've decided to make this body more " popular  " ) and also for the HappySparkles FCPA  body - Flat Edition ( not excatly your " taste" as i suppose ... and now the last ( not yet " Official " ) OldWolf58 's body " New HGEC ( Sort of ...) " .

 

So if you decide to " officialise "  it  at the Nexus , please let us now .

 

Cheers.

 

Edit : if you decide to officialise your RKA body , is it possible to add a version HGEC " Standard " compatible - so compatible with HGEC Hands and Feet ( RAAiAR version , not the Coronerra version ) .

 

If you 've no time to modify your already existing version , it's easy to convert it to HGEC " Standard " ( Hands & feet ) and i can do it easily " , but i prefer working on an " Official" version created by the Creator  , it's better .

 

Sure i 'will send you the modified nifs first ( via PM )  , logic .

 

Bye.

 

PS  ( vendredi 10 Avril 2015 ) : in fact i intend to rework your reworked arms to match/fit the little hands from OldWolf58 , they are HGEC " standard " compatible ( so compatible with the RAIAR version and Exnem of course )  , no need a special upperbody to avoid  a " crater " between the hands and the arms. 

 

And , of course as an " alternative "  option .

 

 

 

 

I hope to have a new version out this weekend.  I have the wrists matched up with RAIAR HGEC and I've mirrored the body to make it symmetrical.  Double checking the weighting at this time and looking to re-unwrap it to minimize texture stretching.

 

Grretings.

 

 Hi  & @ Samhain6 ,

 

OMG ! ...K 'not wait ...  )

 

...  i'm joking of course.

 

 Cool. And will you upload it at the Nexus as an Official new HGEC body ?

 

...  " double checking the weighting "  what do you mean ? Would it be something like the weighting from the Setbody reloaded Blockhead Edidion 1.45/120 Gerra6-Movomo ?  

 

These weighting this in the  " Setblody Reloaded etc ...  " is very different from the " usual weighting " you can find in most of the older mods ... ( based on Saaya-Coronerra " recommandations" )  ... so for " auto-magical convertions " , it's more easy and better to not use the pre-weighted meshes from  " Setbody Reloaded etc ...  "  , but that's just my point of view , the point of view of a " lazy " person ... ;°)

 

... and only symmetrical ?

 

I will prabably not use it in a symmetrical version , but don't " worried" i 'm able to make it "asymmetric" quicly .... ;°)

... so that's just for compatibility reasons ... with the Gerra6's converter .

 

I can use ( but don't like ) a symmetrical upper with an asymmetrical lower , but i avoid this when possible .

 

 

Anyway , i will keep your existing version ... for my personal uses ... because i already did some convertions for my onw uses ( family uses) .

 

PS :   the pre-weighted meshes in " SetBody Reloaded Blockhead Edition 1.45/1.20 " ... et apatati et patata ... look like done for the "old " MovingBreast's  system  ... ( and move more like the MovingBreat system ) and not as the BBB " effect "   mostly popularised by Saaya, Saaya's Team or " Saaya's Team and " Friends" ... .

 

 

 

Hi,

 

The stock BBB weighting wasn't quite optimal so I cleaned it up some.  It isn't fundamentally different from Saaya / Coronerra.

 

The upper and lower body are both symmetrical now and don't have the staggered vertex at the waistline.  This unfortunately breaks compatibility if you mix the new body with the old.

 

I've added an Asymmetrical Waistline version for convenience.

 

If it's to your liking (or if you'd like to see something else added / changed), let me know and I can try to post it officially at "that site over there."

 

Thanks

Link to comment

Greetings.

 

Hi & @ Samhain6

 

 In fact i'm waiting for an Official realease , most of all, an official name.

 

I'will test and check first , the weighting in this new version . I don't want to use something from the Gerra6 & Movomo SetBody Reloaed ... edition , not only for the symetrical aspect ( i can move the 2 vertex - one in the Upper and another one in the Lowerbody- by myself without any problem  ... so that's not a real problem )  but the pre-weighting is important , because i don't want to remake the convertions already done ...  as most of us i don't like doing things twice .

 

And you ? ... :°)

 

 The pre-weighted bodies in the Movomo  " SetBody ... etc " are too much different than most of the already   " BBBrized " outfit made by other talentuous mdders.

So just to keep a " compatibility" with them , i prefer, one , an asymmetrical version ( not important if your body is not and HGEC compatible - like DMRA as example ...) , compatible with HGEC "standard feet" ( so not with the Coronerra based lowers ) . By the way  Naiflan's  models are not HGEC " standard " compatible ...

 

The original first version of GBEC body  by Gooboo ( i'm working with this at this moment ) is not HGEC-Feet Standard compatible, but Gooboo added the optional HGEC lower i asked ( and i will only use this lower for my convertions ) , the new Oldwolf58's body not better , also not  "Standard" ( but i will put a "standard " compatible version there as an "optional lower" ...soon  ) but these bodies use the "Coronerra-Saaya pre-weight ." ... ouf , something a little bit more " standard" ... ;°)

 

 Anyway , at the first view your second version looks similar , perfect , i was afraid you changed  something around the legs ( especially the calves) but you didn't . ok.

 

As a side note , your BBB convertions of Naiflan's mods look similar to the Coronerra/Saaya weighting ( so, perfect for my use , i used some of your DMRA-Guts to reconvert the Upperbody part to another body ... unfortunately , i cannot use tle lowerbody parts, most of the time , to much different from the body i'm working on )  .

 

 And yes i forgot one point : the OP3 bones ( for the BButt ) it's only an  " interresting aspect " just for some of us and only if you can see the " Ass " , without that there is nothing " special " to see if a clothe covers that particular body part, but there is also an issue with some animations i use ( from FF's Custom Animations ) and another one , but there,  related to the OP3 bones/nodes near the Breasts too : totally incompatible with Growlf Body Resizing mod ( and his particular requiered Skeleton in this case) .

 

 So if possible, a body ( official ) version without the OP3 bones ( but i can also remove theses nodes/bones by myself ) .

 

Cheers.

 

 

Link to comment

 

Greetings.

 

Hi & @ Samhain6

 

 In fact i'm waiting for an Official realease , most of all, an official name.

 

I'will test and check first , the weighting in this new version . I don't want to use something from the Gerra6 & Movomo SetBody Reloaed ... edition , not only for the symetrical aspect ( i can move the 2 vertex - one in the Upper and another one in the Lowerbody- by myself without any problem  ... so that's not a real problem )  but the pre-weighting is important , because i don't want to remake the convertions already done ...  as most of us i don't like doing things twice .

 

And you ? ... :°)

 

 The pre-weighted bodies in the Movomo  " SetBody ... etc " are too much different than most of the already   " BBBrized " outfit made by other talentuous mdders.

So just to keep a " compatibility" with them , i prefer, one , an asymmetrical version ( not important if your body is not and HGEC compatible - like DMRA as example ...) , compatible with HGEC "standard feet" ( so not with the Coronerra based lowers ) . By the way  Naiflan's  models are not HGEC " standard " compatible ...

 

The original first version of GBEC body  by Gooboo ( i'm working with this at this moment ) is not HGEC-Feet Standard compatible, but Gooboo added the optional HGEC lower i asked ( and i will only use this lower for my convertions ) , the new Oldwolf58's body not better , also not  "Standard" ( but i will put a "standard " compatible version there as an "optional lower" ...soon  ) but these bodies use the "Coronerra-Saaya pre-weight ." ... ouf , something a little bit more " standard" ... ;°)

 

 Anyway , at the first view your second version looks similar , perfect , i was afraid you changed  something around the legs ( especially the calves) but you didn't . ok.

 

As a side note , your BBB convertions of Naiflan's mods look similar to the Coronerra/Saaya weighting ( so, perfect for my use , i used some of your DMRA-Guts to reconvert the Upperbody part to another body ... unfortunately , i cannot use tle lowerbody parts, most of the time , to much different from the body i'm working on )  .

 

 And yes i forgot one point : the OP3 bones ( for the BButt ) it's only an  " interresting aspect " just for some of us and only if you can see the " Ass " , without that there is nothing " special " to see if a clothe covers that particular body part, but there is also an issue with some animations i use ( from FF's Custom Animations ) and another one , but there,  related to the OP3 bones/nodes near the Breasts too : totally incompatible with Growlf Body Resizing mod ( and his particular requiered Skeleton in this case) .

 

 So if possible, a body ( official ) version without the OP3 bones ( but i can also remove theses nodes/bones by myself ) .

 

Cheers.

 

Hi,

 

RKA Body will be the "official" name.

 

With v2.1 I've made the asymmetrical waist standard to keep things simple and added non-OP3 options.

 

Thanks

Link to comment

 

 

Greetings.

 

Hi & @ Samhain6

 

 In fact i'm waiting for an Official realease , most of all, an official name.

 

I'will test and check first , the weighting in this new version . I don't want to use something from the Gerra6 & Movomo SetBody Reloaed ... edition , not only for the symetrical aspect ( i can move the 2 vertex - one in the Upper and another one in the Lowerbody- by myself without any problem  ... so that's not a real problem )  but the pre-weighting is important , because i don't want to remake the convertions already done ...  as most of us i don't like doing things twice .

 

And you ? ... :°)

 

 The pre-weighted bodies in the Movomo  " SetBody ... etc " are too much different than most of the already   " BBBrized " outfit made by other talentuous mdders.

So just to keep a " compatibility" with them , i prefer, one , an asymmetrical version ( not important if your body is not and HGEC compatible - like DMRA as example ...) , compatible with HGEC "standard feet" ( so not with the Coronerra based lowers ) . By the way  Naiflan's  models are not HGEC " standard " compatible ...

 

The original first version of GBEC body  by Gooboo ( i'm working with this at this moment ) is not HGEC-Feet Standard compatible, but Gooboo added the optional HGEC lower i asked ( and i will only use this lower for my convertions ) , the new Oldwolf58's body not better , also not  "Standard" ( but i will put a "standard " compatible version there as an "optional lower" ...soon  ) but these bodies use the "Coronerra-Saaya pre-weight ." ... ouf , something a little bit more " standard" ... ;°)

 

 Anyway , at the first view your second version looks similar , perfect , i was afraid you changed  something around the legs ( especially the calves) but you didn't . ok.

 

As a side note , your BBB convertions of Naiflan's mods look similar to the Coronerra/Saaya weighting ( so, perfect for my use , i used some of your DMRA-Guts to reconvert the Upperbody part to another body ... unfortunately , i cannot use tle lowerbody parts, most of the time , to much different from the body i'm working on )  .

 

 And yes i forgot one point : the OP3 bones ( for the BButt ) it's only an  " interresting aspect " just for some of us and only if you can see the " Ass " , without that there is nothing " special " to see if a clothe covers that particular body part, but there is also an issue with some animations i use ( from FF's Custom Animations ) and another one , but there,  related to the OP3 bones/nodes near the Breasts too : totally incompatible with Growlf Body Resizing mod ( and his particular requiered Skeleton in this case) .

 

 So if possible, a body ( official ) version without the OP3 bones ( but i can also remove theses nodes/bones by myself ) .

 

Cheers.

 

Hi,

 

RKA Body will be the "official" name.

 

With v2.1 I've made the asymmetrical waist standard to keep things simple and added non-OP3 options.

 

Thanks

 

Greetings.

 

 Hi Samhain6

 

 Ok , thank you.

 

I'll test your different versions today ( tonight is more accurate ) . 

I'll send you a PM , here and at the Nexus too if i post something related to your body at the Nexus .

 

I 'll start with 3 Naiflan's mods but in a non-replacer form and outside of any populated area .

 

3 in1 ... 3 differents mods in only one Upload , i don't want to support some " issues " every where , so i decided to " centralise " some mods .

 

 And i will probably write my Desciption page as this, in " Japanase or Asian form ..."   :

 

 

.... " Hi !

 

      Sorry my english is not heavy , so no support .

 

       Enjoy !   "  ...           ;°)

 

 

Cool (?) , " short " and easy , isn't it ?  ...:°)

 

Cheers.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. For more information, see our Privacy Policy & Terms of Use