[REQ] Transfer the Labia and Pubes from one .nif to another

[Guest kimbale]

Hello fellow pussyworkers!

We will be working on weighting the Realistic Genitalia for CCBE in the next phase. Maybe we could exchange experiences, if you start earlier.

[TSS5062]

Hello fellow pussyworkers!

We will be working on weighting the Realistic Genitalia for CCBE in the next phase. Maybe we could exchange experiences, if you start earlier.

 

Godspeed Kimbale!

[Inferno0214]

Is it possible to remove the pubes? I dont realy like them or if it is hard could you make a 3D Labia only version? I would be realy glad!

[king18]

The full size files look great on the Dream Girl body, and I didn't touch Nifscope.

Made a few mods:

First I made a moist look, then added a little pink inside.

This could get much sloppier.

 

how to make moist look

[king18]

 

FYI,

I started messing around with the Leito file, (thanks to him by the way) one small problem for CBBE:

The labia layer clips over a portion of body texture leaving a small triangle on the pelvis.

I'll need to adjust the position and the UV map.

 

This is weird...

 

Did you edit it using Nifskope or Blender?

 

If Nifskope, I wonder if in the game, the labia mesh is still in the right place (vagina)? The clipping is just a distorted mesh?

 

If the labia mesh is gone from the vagina, you may be forget to click Apply in the Nifskope. Right click the Labia mesh in Nifskope, select Transform > Apply.

 

hi can you model this body for me ?or show me how to model a body for tbbp? real like this body type.thank you

http://mod.dysintropi.me/unpcm-1-2-yet-another-fucking-fix-release/

[TSS5062]

 

The full size files look great on the Dream Girl body, and I didn't touch Nifscope.

Made a few mods:

First I made a moist look, then added a little pink inside.

This could get much sloppier.

 

how to make moist look

 

 

I edited the specular map in photoshop. It can also be done in GIMP.

I located the portion of the texture with the labia, made a selection, and heightened the brightness and contrast.

 

[king18]

 

 

The full size files look great on the Dream Girl body, and I didn't touch Nifscope.

Made a few mods:

First I made a moist look, then added a little pink inside.

This could get much sloppier.

 

how to make moist look

 

 

I edited the specular map in photoshop. It can also be done in GIMP.

I located the portion of the texture with the labia, made a selection, and heightened the brightness and contrast.

 

 

i makeit thanks

 

[Preston123]

 

FYI,

I started messing around with the Leito file, (thanks to him by the way) one small problem for CBBE:

The labia layer clips over a portion of body texture leaving a small triangle on the pelvis.

I'll need to adjust the position and the UV map.

 

This is weird...

 

Did you edit it using Nifskope or Blender?

 

If Nifskope, I wonder if in the game, the labia mesh is still in the right place (vagina)? The clipping is just a distorted mesh?

 

If the labia mesh is gone from the vagina, you may be forget to click Apply in the Nifskope. Right click the Labia mesh in Nifskope, select Transform > Apply.

 

 

Jeez, i really suck at this... do you think you could add a labia to this body as well? I only use 100% weight, so theres only 1 file. I made this body using Unp Bodyslide. Anyway, when i try to add the labia and i hit apply, it the labia stays in place, however in game its invisible. (I even took the  body out of skyrim folder and put it on the desktop and tried to edit it (so that the changes would actually be saved, because if i edit it straight from my skyrim folder, due to permissions, it doesnt actually work) then i deleted the one in my skyrim folder and pasted the edited one. Still no labia is visible

 

femalebody_1.nif

 

 

also could u add the Pubes from Leito's body mod as well? (Bush light) 

I thought that when u took the labia from his mod, you would also use the pube meshes/textures from his mod as well.

 

 

 

[djpredator747]

any chance for cbbe curvy tbbp 3d  vagina and nipples

[AnnaFly]

Greetings

 

 Well  four days ago i found "on that site over there" the leito body with it fantastic 3 D hair ( and this one has nothing to do with the "stolen" Krista's Pubic hair) .

 

This one ( very low poly) use only 79 Ko ( 79 not 790 or more ...)  so this is a great contribution especially for lower -end computer ( or most of the notebooks)  .

 

About the "Labia" : i think the easy way to transfer one from another is just to remove all body parts  first  ( with Nifskope) and save it . It's better than  a copy / past branch and like this way no need to adjust anything other then the 3 axes X,Y,Z  to match the body.

 

I 've made this a long time ago ( but not with a "labia" , only with the Krista's Pubic hair)  and it woks perectly for me. First time  that was with the "TS body" ( the body from TurboSnowwy 's mod with his "Summon Angel" ) .

 

So that was a "transfer"  from an  ADEC pubic hair ( ADEC body of course) to a customized CBBE body (  from the TurboSnowy's mod) .

 

The texture used was one from Oblivion  ( most of the Oblivion texture works well with Skyrim and vice-versa , especially because most of them came from "Oblivion")

 

Sometime the "transfer" isn't apparent ,  and  but most of the time this is because the bipped slot in the CK is not correctly assigned . So it's easy  to adjust.

 

Of course don't forget to "apply"  (transform ---> apply)  after editing the X,Y,Z axes ( exactly like in Oblivion) , and the "title" ( the first at the top , usually tnamed "Scene root" ) must be the same . If not you must change it by edting the txt file ( detail window) in NifsKope.

 

Cheers , and thanks for this topic.

 

NB :

By the way it would be great if someone can convert the Leito 's 3 D hair to Oblivion ... especially because Oblivion use more CPU/GPU ressource than Skyrim ( in my opinion) so a light 3 D  Pubic hair ( 79 Ko only !!!)  would be appreciate .

[DovahbornDragonkiin]

uhmm, maybe it is a bit late but i'm wondering if i can request a unpb tbbp version of this? i just found out the skyrim modding community.

[AnnaFly]

Greetings .

 

@ DovahbornDragonkiin

 

An UNPB version of What ? Here it is a version i've done for the firs post of this topic. Ids this what you want ? Since this one i've done others much better ....

 

Bye.

 

Nb : by the way , i think the leito mesh is to small ( and  maybe to long) to match an UNPB body.

 

I think it's better to rescale it  : z : 1.1 to 1.3 max , reduce the Y axe , and rescale the X axe to 1.5 or more ... don't forget to apply after you 've done some changes.

 

The leito Pubic is more interresting ... very well done and is size is only 82 Ko ( for the Full heavy version) ... the only problem is to find a good colour for it.

With leitoLabia0-femalebody_0.nif

With leitoLabia0-femalebody_1.nif

[DovahbornDragonkiin]

@AnnaFly

 

Thanks for Replying!

 

I was actually looking for a unpb tbbp version with pregnancy scaling body and the 3d labia and the pubic is bad ass. I was messing around with nifskope and got a visual result (except i didn't bother with the pubes anymore) but i am not entirely sure if the pregnancy scaling works. I copied branches of the NPC Belly and the Labia as well as the stuff under it to the unpb tbbp redux (or something like that)... So generally what i think i got  is a bouncing ass and tits + 3D vagina + PSB.But like i said I'm not entirely sure about the pregnancy though.but I got the 3D Vagina and the bouncing ass and tits which is nice. Anyway thanks again! You're like one of the people that makes the world better. I'm actually very new to this modding. I don't Even know how to change my Display Picture here in LL. I'm gonna try your version in a little while. If anyone reading this would like to try my version please tell me. I've yet to find the attach file option. xD

[AnnaFly]

Hi there.

 

@ DovahbornDragonkiin

 

 

In this mod there is a link to an UNPB TBBP body and pregnancy .
 

http://www.loverslab.com/files/file/149-estrus-chaurus/

 

Not tested yet , because a just came back to Skyrim a few days ago , and my Skyrim is outdated.... i only use this computer to download and make some very  "quick" tests , quick = 2 or 3 days maximum to verify a mod ...;°)) .

 

If you want an UNPB BBP (  i don't think it is TBBP) model , i've tested one yesterday for the Gerra6 's "new converting  clothes system " or something like that..  it's a model based on the "ShoolGirlMicro outfit ... i wanted to convert it to a custom CBBE model ( not good results) ... There is a modified ( rescaled Vagina lips - from de Leito body TBBP mode ) and a3  or 4 different Pubic hairs ...  so if you want it , just ask ... today i'm working on another "Pubic Hair" ...the best in my opinion , it is from the Leito Body mod too.

 

You can see a picture of this "pubic" at this link ( post 483 , trhe last at this moment ..) :

 

http://www.loverslab.com/topic/25750-hdt-body/page-25?do=findComment&comment=745894

 

By the way , yes why not shared your model ? I think there are a lot off " collectionneurs" here on LL ( sorry it is french , i don't known the english term for this one .. may be "collectors" )

 

Bye.

 

[DovahbornDragonkiin]

Ah well. Pls tell if i need to put it down. Attached to this post are my somewhat working (for me, at least) version of mr. GECK.O (TY SIR) unpb with tbbp so it has bouncing tits and ass, the 3d labia without the 3d pubes and the pregnancy scaling body (not tested, but I hope it works). remember to back up your files, just in case. here is for any one who wants to TRY.

 

@ AnnaFly

 

I may want to get a piece of that. if it's not too much trouble. TY SO MUCH. oh and btw, i tried the unpb in the estrus chaurus and ut's not tbbp. just unp with psb.

femalebody_1.nif

femalebody_0.nif

[Z0mBieP00Nani]

FYI,

I started messing around with the Leito file, (thanks to him by the way) one small problem for CBBE:

The labia layer clips over a portion of body texture leaving a small triangle on the pelvis.

I'll need to adjust the position and the UV map.

 

I've got the same clipping issue.. I tried covering up the part of the pussy texture that I thought was responsible even going so far as to cover up two thirds of the pussy texture, but there was no change. not sure what is causing the problem, maybe I was just picking the wrong spot..

 

If you manage to figure it out, please do share what you've learned.

 

UPDATE: I managed to find the part of the texture that needed to be edited and got it to look good good in NifSkope, but it didn't matter when it came time to test the texture in game, for some stupid reason it continues to act as though NO changes have been made to the texture..

 

The right spot

 

What it looks like in NifSkope

 

and what it STILL looks like in game.. =/

 

[AnnaFly]

Ah well. Pls tell if i need to put it down. Attached to this post are my somewhat working (for me, at least) version of mr. GECK.O (TY SIR) unpb with tbbp so it has bouncing tits and ass, the 3d labia without the 3d pubes and the pregnancy scaling body (not tested, but I hope it works). remember to back up your files, just in case. here is for any one who wants to TRY.

 

@ AnnaFly

 

I may want to get a piece of that. if it's not too much trouble. TY SO MUCH. oh and btw, i tried the unpb in the estrus chaurus and ut's not tbbp. just unp with psb.

 

Greetings..

 

Wouaw there are a lot of messages today ...

 

So i will respond one by one ... the link i've posted to "Estrus" was only here beacause it refer to another body "TBBP" ... i cannot test those sort of mods because i don't use "SexLab" , FNIS , SKEC HDT and so on .... i just looks for "resources" ( and i'm very happy to be heere on Ll for this purpose ...) nothing else.

 

I'm study here ... , great " high school"  ... ;°)

 

 The link i was thinking about :

 

http://www.loverslab.com/topic/18546-pregnancy-weighted-tbbp-body-for-bodyslide/

 

Cheers , i wiil see what i can do with your 2 meshes , thanks for sharing , even if there are some issues, we are not on " That Site Over There "  here , we can "share " something much easyly.

 

NB : when all "adjustments" are done , think about cleaning you mesh ... right-click on the "Scene Root" ... or the name yoiur first node has ...) ,--->  "Bloc" ---> crop to branch .

 

You can also do a " Spell --->  " Optimyse"   '(sorry my NifSkope is "French" ) ---> renmove boggus node ... but this is another storry , you can use this "spell" when all is done, in case you need to add another "mesh" it's better at the first time not cleaning the whole first mesh ... ( destination mesh) .

[Z0mBieP00Nani]

FYI,

I started messing around with the Leito file, (thanks to him by the way) one small problem for CBBE:

The labia layer clips over a portion of body texture leaving a small triangle on the pelvis.

I'll need to adjust the position and the UV map.

 

FIXED IT!!.. FINALLY!!

 

If you're using CBBE like this guy and myself, follow the instructins found here http://www.loverslab...cer-bbp/page-40 scroll down till you find Tutorial called 3D Labia Texture Tutorial but before flattening the image use the "Ploygonal Lasso Tool" (if your using Photoshop) to select and Cut the area shown in the picture below. Do that for "femalebody_1 DDS. femalebody_1_msn DDS. and femalebody_sk DDS. (for the sk file it might be best to resize the image to be the same size as the vagina texture layer.. don't worry, size doesn't matter in this case *hint hint wink nudge* ). after removing the offending piece THEN flatten image and save, and it should look as it should. TRUE if you remove that part of the texture it will show the skin texture behind it, but that won't really matter inlessyou have the pussy lips hanging out like a wizard's sleeve as the part of the texture you will be affecting is on the back of the left labia.

 

 

Hope this helps anyone else who is having this issue.

[Z0mBieP00Nani]

I know thsi is a thread about converting the 3D Labia Mesh and reoving the pubes, but I kind of like "that Frazetta look" so I made a color changing mesh for this mod.. or I suppose it could be used for a standard body.

 

These are just the pube meshes! Some assembely is required!

 

There is also a texure and normal map that shipped with the origonal mod that I tweked a bit for this aplication, so all credit for the meshes and textures go to the mod author(s)

 

The only bug I have not been able to work out is when ever you load a new game, or equip and unequip an armor or clothes item the color wil revert back to default black.

 

 

 

 

Color Changing Pube Meshes.rar

[kerq]

Hey!

 

Is there anyone who know how or can do the inner labia by Leito wearable? Just like another piece of clothing? Without the pubic hairs and correctly aligned to the UNP body?

 

That would really be awesome!

[BringtheNoise]

Doh...

1. download body slide and outfit studio.

2. open leto's body in as an outfit.

Delete the base body shape and leave only the labia lips.

3. save labia lips as a new nif

4. open the UNPB body as an outfit (start with femalebody_0)

5. open the new nif file (the labia that you saved in step 3).

6. right click on the labia in the top right pannel and choose "duplicate shape" and name it something simple like "labia".

7. if the item lined up correctly to the unpb body (which it should), then save shape at femalebody_0 (in a separate folder from the femalebody you opened, that way you do not over right the original, just in case things don't work out).

8. repeat step 4 thru 7 this time for the femalebody_1 nif.

 

Toss both femalebody_0 and femalebody_1 in your skyrim folder and test them (use the skin set that leto supplied as it is a unp texture and the UNPB body uses the unp uv map). Fire up skyrim and see if the vag shows up.

 

A quick way for cbbe users would be steps 1 thru 3, and

4. open the cbbe body as an outfit (start with the 0 weight)

5. set reference to "convert cbbe to unp", conform to sliders (this conforms the body to the slider), flip the slider to 100 (this turns the cbbe shape into a unp shape) and set base shape (this locks the shape to a unp shape).

the cbbe body will look like the unp body now...

6. set the reference to the "labia" mesh you created in step 3. "duplicate shape" and name it

you should now see a unp body with a cbbe skin and a add on labia, if it all lined up then go to step 7. if it did not line up then see the area about Shape movement below.

7. set reference to "convert unp to cbbe", conform to sliders, flip the slider to 100 and set base shape.

the body now be back to the default cbbe shape with the add on labia added into the mesh and you can export to nif and save it as femalebody_0 (again in a different folder from where your default femalebody_0 is).

8 repeat steps 4 thru 7 only this time for the femalebody_1 nif

 

 

Shape Movement

You can move an object to get it to line up in Outfit studio by highlighting the item in the top right panel and then choose the "move shape" function in the shape menu at the top. This will bring up a box with x, y, and z options those are the right to left, front to back, and top to bottom adjustments functions.... once the object is moved to where you want it... do a set base shape (just for piece of mind).

 

Now a skin for the CBBE folks, that has been covered in the above post so I'll leave that alone.

 

You can also do a save project with the femalebody_1, so it can be used as a body reference in body slide.

You will have to know what you are doing in OS to do this though (again you will have to know how to create a reference shape and how to make sure it has the appropriate morphs).

 

You can also use the reference shapes in Outfit Studio to create HDT, TBBP, or BBP.

You would need to open a nif file as an outfit in OS, and then choose which type you want as a reference.

 

Example.

You created a cbbe body with the above steps but it only has the bbp bone weights, you can either

a. load the bone weighted by you want as a reference, and try to copy the bone weights into the bpp body... and hope the bone weights go where they are suppose to.... or

b. load the cbbe body as an outfit, load the bone weighted version as a reference.

delete the base shape from the outfit side, and then duplicate shape the bone weighted version from the reference.

Save as femalebody_1, then load the reference xml file "Data\CalienteTools\BodySlide\ConversionSets\WeightConvert.xml" and set it to CBBE high to low.

c. conform all, flip the slider to 100 (which will change the shape to the cbbe 0 weight) and export nif and save it as femalebody_0

Now you have the labia mesh in the 0 and 1 bodies with the bone weights you want (hdt, tbbp, bbp, or none).

 

Note:

When I say "Save as" that is actually the function "File - Export Current/Export Nif" then save the item as "what ever name".nif

When I say "Conform to All" that is a function under the "Slider"  option at the top of Outfit Studio, and the quick key set is Ctrl+Shift+C.

When I say "Set Base Shape" that is a function under the "Slider" option at the top of Outfit Studio (no quick key set for this one).

When trying to move an object by the x,y,z coordinates you should be looking at the object in question (so hold down the mouse wheel and move the camera until you are looking at the item in question, and move the pop up box where the changes are being made so it does not obstruct your view of the object you are moving. OS's move shape function will move the item in real time so you can adjust the numbers before saving. But know that once you hit save its is moved there is no undo for the move shape function. So be very very very very careful when using the move shape function in OS (or you could end up with items in the completely wrong area of the body).

 

Advice given as is, if you happen to break you mesh I am not responsible...

That is why I said to save the changed nif into a different folder from the original.

That way if you mess up you can delete the borked nif and start again with the original.

 

Mileage may very depending on user, warrant (if any) void by reading this post.

 

[kerq]

Thanks a whole bunch for the elaborate answer. Will try this!

[chunkynut]

Any word on the CBBE version? I tried for like 4 hours but I've never done anything like this so I haven't accomplished much