Aroused Creatures Not Starting Sex

[Damyn]

Hello Every one, I was hoping to have the night to my self when I realized I cant use the Sexlab Aroused Creatures Mod. My situation is that my self and the Animal Have 100 Arousal each but when I invite the Animal To Mate it wont. all it says in the Top Left is (EG) Horse is not interested in mating with you. I have all the required Mods with no errors and for what I know they do work. its just been sending me in a confused Spiral. any Help, Suggestions or pointers will be Very helpful and hopefully we can find a fix for others to see.

 

Skyrim SE/SKSE are up to date if this helps.
 

[sexsex32141231]

err,did you toggle creature animation at sexlab?

[Psalam]

Look at this from the More Nasty Critters modpage:

Spoiler

Animation Troubleshooting:

 

1. in my opinion, Mod Managers should be avoided like the plague (i hate all of them).
but if you insist on using one, make sure that it's installing the files to the right location.
note: Mod Managers may require extra steps to get FNIS working:

https://www.youtube.com/watch?v=iukqiPz7XuU

 

2. run/rerun the GenerateFNISforUsers.exe, if you don't the animations wont work/run.
C:\Games\Steam\SteamApps\Common\Skyrim\Data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe
or
C:\Program Files (x86)\Steam\SteamApps\Common\Skyrim\Data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe
WARNING: Windows (Vista/7/8/10) Security may interfere with updating/overwriting the FNIS behavior files.
you may not even get a error message telling you that this has happened.
make sure FNIS and your mod manager are running with administrator privileges.

 

3. when you start the game with the Skyrim Script Extender (SKSE) loader the list of installed mods wont get refreshed, so if you install a mod and just start the game with the loader any new mods you installed wont be fully activated. to fix this problem go to the skyrim launcher and click on "DATA FILES" and it will refresh the list of installed mods, you can now close the launcher and start the game with the skse loader.

 

4. in game you need to go inside SexLab's Mod Control Menu (MCM) and click on "install" first before you can use SexLab.

 

5. make sure you have "Allow Creature Animation" checked in SexLab's MCM settings.

 

6. turn off "Match Creature Gender" in sexlab's MCM settings, if this setting is enabled some animations won't play, its because most creatures don't have female counterparts in skyrim by default.

 

7. did you forget to install the FNIS Creature Pack? install it and rerun the GenerateFNISforUsers.exe, then do steps 5 & 8

 

8. you may need to reload the animations, go to the Animation Loader's MCM and then:
8.1. click on the "Disable All" button.
8.2. click on "Rebuild Animation Registry", then Wait for the message to pop up*.
8.3. click on "Reload JSON".
8.4. click on "Enable All".

8.5. click on "Count Animations" and make sure nothing is over 500, turn off some animations if they are.
8.6. click on "Register Animations", then Wait for the message to pop up*.
*if you like you can press "~" on your keyboard to open the console so you can watch it Register everything, just make sure you close it before you try to click on anything.

 

9. if SLAL Packs are not being listed in SLAL try reinstalling/updating JContainers.

 

10. if all else fails, try loading a older save file from before sexlab was installed....but first try using sexlab's debug menu to reset everything to there default values.

 

[Damyn]

Do you Think that Using Sexlab 1.63 SE Beta 9 Could be the Issue? Would it matter?
But i have Gone through that Check List and Made sure Everything is there And No Errors.
Im still just Confused AF.

[Psalam]

So,

1) you have FNIS creatures

2) you have turned creature animations "on" in the SexLab McMenu.

 

What skeleton are you using for your PC? Do you have issues with sex with humanoid NPCs? Could you post your FNIS output (preferably in a spoiler)?

[Damyn]

12 hours ago, Psalam said:

So,

1) you have FNIS creatures

2) you have turned creature animations "on" in the SexLab McMenu.

 

What skeleton are you using for your PC? Do you have issues with sex with humanoid NPCs? Could you post your FNIS output (preferably in a spoiler)?

I do have FNIS Creatures and I have turned Creature Animation on. I am Using XP32 Maximum Compatibility Mesh For SSE.
Which I did a Bit of Googling On the FNIS Output and I still am unsure of what it is? and Where to Find it.
BTW I am using NMM

 

[MadMansGun]

check the mcm settings for Aroused Creatures, it could just be that you don't have animations with player enabled.

[Damyn]

3 hours ago, MadMansGun said:

check the mcm settings for Aroused Creatures, it could just be that you don't have animations with player enabled.

I have Checked the Settings And all Animations Are Enabled I have Also Gone Ahead and Reinstalled All The Mods with the Requirements, Reinstalled the Game, Started a New Save and Tried Using The Trouble shooting Steps Above. No Success.
At this Point i Seriously Do not Know What the Heck to do.

 

[MadMansGun]

3 minutes ago, Damyn said:

At this Point i Seriously Do not Know What the Heck to do.

use matchmaker i guess.

[Damyn]

1 hour ago, MadMansGun said:

use matchmaker i guess.

Why Didn't I Know about this mod sooner
Even though we didn't fix the Problem we did find a alternative. So thank you! I Very much appreciate Your time and Help.

Hava Great Day Mate!

[Oroborus]

On 9/22/2021 at 4:53 PM, Damyn said:

Do you Think that Using Sexlab 1.63 SE Beta 9 Could be the Issue? Would it matter?
But i have Gone through that Check List and Made sure Everything is there And No Errors.
Im still just Confused AF.

 

I use 1.62 LE and have the same issue. Only by reinstalling Aroused creatures you can resolve it for a short time

Edited September 23, 2021 by Oroborus

[Damyn]

I fixed the issue. Turns out FNIS Creatures was not installed Properly Despite FNIS saying It was successful. Just had to click Reinstall in NMM.

[poka_ne]

English is not my native language.
I have a problem I can't get my companion to have sex with an animal. The companion gives consent and goes to the animal and then gives this message how to fix it

[joeson97]

On 2021/9/22 at PM6點07分, Psalam said:

看看 More Nasty Critters 的 modpage：

  隱藏內容

動畫故障排除：

 

1. 在我看來，Mod Managers 應該像瘟疫一樣被避免（我討厭它們）。
但如果你堅持使用，請確保它將文件安裝到正確的位置。
注意：Mod Managers 可能需要額外的步驟才能讓 FNIS 正常運作：

https://www.youtube.com/watch?v=iukqiPz7XuU

 

2. 運行/重新運行 GenerateFNISforUsers.exe，如果不運行，動畫將無法工作/運行。 C
:\Games\Steam\SteamApps\Common\Skyrim\Data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe
或
C:\Program Files (x86)\Steam\SteamApps\Common\Skyrim\Data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe
警告：Windows（Vista/7/8/10）安全機制可能會幹擾 FNIS 行為檔案的更新/覆蓋。
您甚至可能不會收到錯誤訊息告知您發生了這種情況。
請確保 FNIS 和您的 mod 管理員以管理員權限執行。

 

3.當您使用 Skyrim Script Extender (SKSE) 載入器啟動遊戲時，已安裝的模組清單將不會刷新，因此如果您安裝模組並使用載入器啟動遊戲，則您安裝的任何新模組都不會完全啟動。要解決此問題，請前往 skyrim 啟動器並點擊“資料檔案”，它將刷新已安裝模組的列表，您現在可以關閉啟動器並使用 skse 載入器啟動遊戲。

 

4. 在遊戲中，您需要進入 SexLab 的 Mod 控制選單 (MCM) 並先點選「安裝」才能使用 SexLab。

 

5. 確保在 SexLab 的 MCM 設定中選取了「允許生物動畫」。

 

6. 在 sexlab 的 MCM 設定中關閉“匹配生物性別”，如果啟用此設置，某些動畫將不會播放，這是因為大多數生物在天際中默認沒有女性對應物。

 

7. 你忘記安裝 FNIS Creature Pack 了嗎？安裝它並重新執行 GenerateFNISforUsers.exe，然後執行步驟 5 和 8。

 

8. 您可能需要重新載入動畫，請前往動畫載入器的 MCM，然後：
8.1. 按一下「全部停用」按鈕。 8.2
. 點擊“重建動畫註冊表”，然後等待訊息彈出*
。 8.3. 點選“重新載入 JSON”。 8.4
. 按一下「全部啟用」。

8.5. 點選“動畫計數”，確保動畫數量不超過 500，如果超過，請關閉部分動畫。 8.6
. 點擊“註冊動畫”，然後等待訊息彈出*。
*如果願意，您可以按鍵盤上的“~”打開控制台，以便觀看註冊所有內容，只需確保在嘗試單擊任何內容之前將其關閉。

 

9. 如果 SLAL 套件未在 SLAL 中列出，請嘗試重新安裝/更新 JContainers。

 

10. 如果所有方法都失敗了，請嘗試載入安裝 sexlab 之前的舊儲存檔案...但首先嘗試使用 sexlab 的偵錯選單將所有內容重設為預設值。

 

i didnt read that while I was installing, and how do i will miss that lmao. btw i finally made it work, it took me for few days to debug lol