mod by sarsha043033 (2)

[ognish]

こういう需要があるかは不明なEXCELファイル。

まだ始めたばかりなので、少しずつ蓄積したいところ。

 

●Dummyに合いそうなポーズ一覧＠Take_me_off_the_island_ver5.03_Ognish.zip

[yadamon]

「お口でキレイにしてあげる」

[ognish]

On 9/26/2024 at 12:39 AM, ognish said:

こういう需要があるかは不明なEXCELファイル。

まだ始めたばかりなので、少しずつ蓄積したいところ。

 

●Dummyに合いそうなポーズ一覧＠Take_me_off_the_island_ver5.03_Ognish.zip 9.35 kB · 6 downloads

 

標準（と勝手に命名している）Dummy群を更新したため一旦VerUP。

横寝系、きっとsarsha043033氏の想定する腕に頭が乗るポーズがありそうな気もするのだけど、リセット状態では見つけられず……。

あとは診察室と一部ギミック系（アイアン・メイデンとか制限多い物は除外予定）も足していきたい。

●Dummyに合いそうなポーズ一覧＠Take_me_off_the_island_ver5.03_Ognish_v0.2.zip

[yadamon]

On 9/6/2024 at 1:40 AM, rrrt2 said:

はじめまして。いつも素晴らしいMODをありがとうございます。

 

解決法と呼ぶにふさわしいかは分かりませんが、フリーの画像編集ソフトやPhotoshopを利用して、フキダシ素材を自作するのが１番画質改善には手っ取り早いような気がします。

ご参考までに、普段私が別の畑でイラストを投稿する際、フキダシを作るのに使用しているフリーフォントとフリーフキダシをいくつかご紹介します。

 

 

フキダシはこちらからダウンロードできます↓

フキダシデザイン：h://fukidesign.com/e1364/

 

甘夏さんという漫画家さんの作品を見たら効果音だらけで素晴らしかったので、ここで教えていただいたもので作ってみました。

が、私のセンスのなさを露呈する結果にｗ。

ただ、静止画に動きをイメージする効果を与えられるのはありかな。

[sarsha043033]

 

Photoroom_for_ownersroom_Ver1.00

 

　　　　　　　+

5250's item photo studio is amazing, so I decided to make my favorite photo room available for use by FingerDMR.
I'd like to thank both of them for giving me permission to use it.

 

STEP1 Install 5250's item photo studio and this Photoroom_for_ownersroom_Ver1.00

Photoroom_for_ownersroom_Ver1.00.7z

 

STEP2; Replace this Item_Mod.ini in item_PhotoStudio

5250 has already reflected this function.

The files will remain for users of the old version.

Item_Mod.7z

 

 

STEP3; Set velvet curtains

 

 

 

Key: Ctrl + L    change poster

Edited October 7, 2024 by sarsha043033

[py913]

水着側のハッシュを使うとテクスチャがテカテカしなくなるけど頂点グループの調整が必要

[FingerDMR]

[uoldsport]

On 10/2/2024 at 3:31 PM, yadamon said:

甘夏さんという漫画家さんの作品を見たら効果音だらけで素晴らしかったので、ここで教えていただいたもので作ってみました。

が、私のセンスのなさを露呈する結果にｗ。

ただ、静止画に動きをイメージする効果を与えられるのはありかな。

May I ask how you added a dummy to this room? I also want a mod like this

[sarsha043033]

item_PhotoStudio_panel_key_mod

右AITキーのない古いキーボード用（私がそう）。もしくは右手を空けたい人へ（笑）

5250 has already reflected this function.　5250さんはこの機能を反映済みです

The files will remain for users of the old version.　旧Ver.使用者の為にファイルは残しておきます

item_PhotoStudio_panel_key_mod.7z

5250さんの　item_PhotoStudio　に上書きください。

alt + z パネル有効及び選択

alt + x 戻る

alt + ｃ 選択パネルの写真変更

alt + ｖ 戻る

 

追記：選択したパネルの枠が金色になります

 

 

 

 

このMODがお気に入り過ぎて自分のMODに手が付けられない

Edited October 7, 2024 by sarsha043033

[sarsha043033]

5250さんの　item_PhotoStudio　も反映したもの+アルファをそのうち　Ver. UP　予定とのことでそれまでのつなぎです。

[uoldsport]

10 minutes ago, sarsha043033 said:

item_PhotoStudio_panel_key_mod

右AITキーのない古いキーボード用（私がそう）。もしくは右手を空けたい人へ（笑）

item_PhotoStudio_panel_key_mod.7zUnavailable

5250さんの　item_PhotoStudio　に上書きください。

alt + z パネル有効及び選択

alt + x 戻る

alt + ｃ 選択パネルの写真変更

alt + ｖ 戻る

 

追記：選択したパネルの枠が金色になります

 

 

 

 

このMODがお気に入り過ぎて自分のMODに手が付けられない

How do I use the mods in this series? I downloaded the two files you sent on the upper floor, but after changing the curtains in the game, only the texture changed, and there was no other response.
Did I install any missing components?
 

 

[sarsha043033]

Please refer to here for basic item placement and key operations.

For additional MODs, please refer to the respective readme.

[yadamon]

21 hours ago, uoldsport said:

May I ask how you added a dummy to this room? I also want a mod like this

I use google translate.

Sorry if there's some weird wording.
I'm not a modder, I only know a little about Blender, so I don't know much more than what I wrote below.

Be sure to back up the original file before doing this.

MOD:Back_hands_tied R_Shiranui_Base_Common_V5.10by sarsha043033
   　　Back_hands_tied_Based_on_R.Shiranui.Common_V5.10_AddPosing_byMisakiLove  240908

Overwrite the following files in the ItemA folder:pierce02.fmt,pierce02.ib,pierce02.vb

Open the ini file and change the following line: 
[ResourceItemA8PST0]
filename = ItemA\pierce01-0.dds  ->  filename = ItemB\dummy00.dds

Start the game and press CTRL+1 or CTRL+2 to activate controls and press X+1 8 times.

(1)If you don't like the position of dummy,import pierce02.vb in Blender,adjust the position,and save it overwriting.

(2)Go back to game and press F10 to reboot.

Repeat (1) and (2) until the dummy is in the desired position.

pierce02.7z

[uoldsport]

4 hours ago, yadamon said:

4 hours ago, yadamon said:

I use google translate.

Sorry if there's some weird wording.
I'm not a modder, I only know a little about Blender, so I don't know much more than what I wrote below.

Be sure to back up the original file before doing this.

MOD:Back_hands_tied R_Shiranui_Base_Common_V5.10by sarsha043033
   　　Back_hands_tied_Based_on_R.Shiranui.Common_V5.10_AddPosing_byMisakiLove  240908

Overwrite the following files in the ItemA folder:pierce02.fmt,pierce02.ib,pierce02.vb

Open the ini file and change the following line: 
[ResourceItemA8PST0]
filename = ItemA\pierce01-0.dds  ->  filename = ItemB\dummy00.dds

Start the game and press CTRL+1 or CTRL+2 to activate controls and press X+1 8 times.

(1)If you don't like the position of dummy,import pierce02.vb in Blender,adjust the position,and save it overwriting.

(2)Go back to game and press F10 to reboot.

Repeat (1) and (2) until the dummy is in the desired position.

pierce02.7z 357.62 kB · 1 download

Thank you. May I use it on the R_Shiranui MOD for Honoka and Marie?

 

[uoldsport]

5 hours ago, yadamon said:

I use google translate.

Sorry if there's some weird wording.
I'm not a modder, I only know a little about Blender, so I don't know much more than what I wrote below.

Be sure to back up the original file before doing this.

MOD:Back_hands_tied R_Shiranui_Base_Common_V5.10by sarsha043033
   　　Back_hands_tied_Based_on_R.Shiranui.Common_V5.10_AddPosing_byMisakiLove  240908

Overwrite the following files in the ItemA folder:pierce02.fmt,pierce02.ib,pierce02.vb

Open the ini file and change the following line: 
[ResourceItemA8PST0]
filename = ItemA\pierce01-0.dds  ->  filename = ItemB\dummy00.dds

Start the game and press CTRL+1 or CTRL+2 to activate controls and press X+1 8 times.

(1)If you don't like the position of dummy,import pierce02.vb in Blender,adjust the position,and save it overwriting.

(2)Go back to game and press F10 to reboot.

Repeat (1) and (2) until the dummy is in the desired position.

pierce02.7z 357.62 kB · 1 download

I also use web page translation.
Steam is unable to use the common body type R_Shiranui MOD of sarsha043033
But this MOD can be used with HONOKA or MARIE body types
I tried to transplant to other body types, but the texture encountered an error. Do you have any corresponding files for other body types?

 

[yadamon]

7 hours ago, uoldsport said:

I also use web page translation.
Steam is unable to use the common body type R_Shiranui MOD of sarsha043033
But this MOD can be used with HONOKA or MARIE body types
I tried to transplant to other body types, but the texture encountered an error. Do you have any corresponding files for other body types?

 

I am a DMM user.

Neither HonokaBody nor MarieBody are used.

This is because MisakiLove's POSE MOD cannot be used.

 

I tried installing the HonokaBodyMOD, but it didn't work.

Sorry, but I can't solve this problem.

[yadamon]

Mimic

[sarsha043033]

WashingMachine to kaneda special Ver.1.00

 

 

WashingMachine to kaneda special Ver.1.00.7z

 

Owners room glass material test
WashingMachine change to kaneda special

;For DMM

Not required in latest d3dx.ini

Add this code to d3dx.ini file.

;----------------------------------
[ShaderOverrideWashingmachine20241011]
; Washingmachine
; Bytecode hash: 
hash = abff71af57567a04
run = CommandListClothes
;----------------------------------

mod-KS00.ini : only bike
mod-KS01.ini : bike and seesaw
 

Edited October 13, 2024 by sarsha043033

[sarsha043033]

WashingMachine to Transparent Bahtub Ver.1.00

 

 

WashingMachine to Transparent Bahtub Ver.1.00.7z

 

Owners room glass material test2
WashingMachine change to Transparent Bahtub

;For DMM

[5250]

1 hour ago, sarsha043033 said:

WashingMachine to Transparent Bahtub Ver.1.00

 

 

WashingMachine to Transparent Bahtub Ver.1.00.7z 2.53 MB · 1 download

 

Owners room glass material test2
WashingMachine change to Transparent Bahtub

;For DMM

私も以前、変態ぴえろを登場させるために、透過バスは作った事があったんですが、やっぱり、ちゃんとした透過のメッシュから作るのと、単純にテクスチャーの表示時に透過させるのとでは、出来が全然違いますね！

不自然な透過にならないのも、艶もとても良いです。

さっそく、変態ぴえろは、この新型透明お風呂に引っ越します！

 

 

Edited October 13, 2024 by 5250

[aa12756]

Hello. I would like to know how to introduce squirt mods, which are often used in this topic. (This text has been translated by Google)

Edited October 19, 2024 by aa12756

[sarsha043033]

32 minutes ago, aa12756 said:

Hello. I would like to know how to introduce squirt mods, which are often used in this topic. (This text has been translated by Google)

Is this what you're looking for?

[yadamon]

I use google translate.

 

This is a mod by sarsha043033 that simply moves the position of the dummy a little so you can enjoy the cowgirl position. For those who want to feast their big cock on a girl in a dark place, this is for you.
In the Take_me_off_the_island_by_sarsha043033_ver6.00 > item >dummy folder, overwrite and save dummy04.fmt , dummy04.ib , dummy04.vb of your desired style.
Don't forget to back up the original files.

 

sarsha043033さんのMODでdummyの位置を少し動かして騎乗位を楽しむだけのものです。ダークな所で女の子に巨根をごちそうしたい人はどうぞ。
Take_me_off_the_island_by_sarsha043033_ver6.00 > item >dummyフォルダに、ご希望のスタイルの dummy04.fmt 、dummy04.ib 、dummy04.vb を上書き保存してください。
元ファイルのバックアップを忘れずに。

Kijoui.zip VolleyBall.zip

[uoldsport]

7 hours ago, yadamon said:

I use google translate.

 

This is a mod by sarsha043033 that simply moves the position of the dummy a little so you can enjoy the cowgirl position. For those who want to feast their big cock on a girl in a dark place, this is for you.
In the Take_me_off_the_island_by_sarsha043033_ver6.00 > item >dummy folder, overwrite and save dummy04.fmt , dummy04.ib , dummy04.vb of your desired style.
Don't forget to back up the original files.

 

sarsha043033さんのMODでdummyの位置を少し動かして騎乗位を楽しむだけのものです。ダークな所で女の子に巨根をごちそうしたい人はどうぞ。
Take_me_off_the_island_by_sarsha043033_ver6.00 > item >dummyフォルダに、ご希望のスタイルの dummy04.fmt 、dummy04.ib 、dummy04.vb を上書き保存してください。
元ファイルのバックアップを忘れずに。

Kijoui.zip 481.4 kB · 17 downloads VolleyBall.zip 481.22 kB · 19 downloads

Thank you for sharing

[worldendxyz]

Is there a way to remove the dummy's hand and move only the beads?
Even if I change the ini, it doesn't work.

ダミーの手を無くしてビーズだけにしたい。

ビーズも好みの位置に変えていきたい。

私では知識が足りなくてできません。

助言、お願いします。