CBBE/CB++/TBBP knowledge database

[Soap desu]

Ok... gosh dammit I think i got it... for some reason a mod was conflicting with this one, went through my load order and unticked everything one by one lol I think its working now. 

 

LOL Thx all 

 

correction  now only the naked body works, batch building the armor no longer works properly as the players body does not change ~_~ oh boy problems switch but no CTD ;l 

[delilah]

this may not be the right place for this, but im having a tbbp issue. 

 

i installed the ashen race today and now none of teh animations work.  all my boobs do when i walk as swing back and forth like they were made of stone.  if i load a save from before i switched to ashen, the bounce is as it should be.

[alantrik]

So a mod that had 0 problems before now refuses to work on a clean install...just great...

[Deedlit]

this may not be the right place for this, but im having a tbbp issue. 

 

i installed the ashen race today and now none of teh animations work.  all my boobs do when i walk as swing back and forth like they were made of stone.  if i load a save from before i switched to ashen, the bounce is as it should be.

Try replace her meshes again, and re-run fnis.

[ArielFetters]

Could use a bit of help I got everything installed, got the sliders and body setup the way I want, clicked create body, worked, clicked batchbuild and selected everything, worked, but then I get into game and nothing's changed I've tried reloading earlier saves, starting totally new games, reinstalling the whole game, nothing's working. All the clothing/body mods I'm using are CHBSC okay (As best I can tell) and I'm out of ideas. Can anyone toss me a line here? Or at least some coffee? (No milk, no sugar, strong enough to use as solvent)

[Deedlit]

Could use a bit of help I got everything installed, got the sliders and body setup the way I want, clicked create body, worked, clicked batchbuild and selected everything, worked, but then I get into game and nothing's changed I've tried reloading earlier saves, starting totally new games, reinstalling the whole game, nothing's working. All the clothing/body mods I'm using are CHBSC okay (As best I can tell) and I'm out of ideas. Can anyone toss me a line here? Or at least some coffee? (No milk, no sugar, strong enough to use as solvent)

if using cbbe, follow the bodyslide at attach (just the group filter and slideset, edit the body like you wanna after using that settings), after done you must run Fnis .

Try also http://skyrim.nexusmods.com/mods/34713 , i just prefer using tender one, that ones goes like a jelly, not a good at least for me,but try.

[ArielFetters]

 

Could use a bit of help I got everything installed, got the sliders and body setup the way I want, clicked create body, worked, clicked batchbuild and selected everything, worked, but then I get into game and nothing's changed I've tried reloading earlier saves, starting totally new games, reinstalling the whole game, nothing's working. All the clothing/body mods I'm using are CHBSC okay (As best I can tell) and I'm out of ideas. Can anyone toss me a line here? Or at least some coffee? (No milk, no sugar, strong enough to use as solvent)

if using cbbe, follow the bodyslide at attach (just the group filter and slideset, edit the body like you wanna after using that settings), after done you must run Fnis .

Try also http://skyrim.nexusmods.com/mods/34713 , i just prefer using tender one, that ones goes like a jelly, not a good at least for me,but try.

 

 

Tried it, and the top two checkboxes in batch build (The body ones) cause it to not be able to save the body. If I check all the clothing ones then it saves them, but still no luck getting them in game. I attached a screen of the settings I'm using in case any of them are too extreme. Please take a look  

 

Oh, the steps I've been taking are, in order

Install body mod of course (Body physics, basic caliente body, then the plus plus body, then no-ma'am idles), install Bodyslide as normal and set to admin always. After getting settings taken care of I use FNIS (I use it all the time, surprised I don't use it after I eat lol) and then load my last save. If that crashes I try and auto save, and if that doesn't work then I go back to the 'just finished char creation and walkig to the chopping block' save. If THAT doesn't  work, then I drink more coffee and keep looking for tutorials or help.

[Deedlit]

 

 

 

 

Could use a bit of help I got everything installed, got the sliders and body setup the way I want, clicked create body, worked, clicked batchbuild and selected everything, worked, but then I get into game and nothing's changed I've tried reloading earlier saves, starting totally new games, reinstalling the whole game, nothing's working. All the clothing/body mods I'm using are CHBSC okay (As best I can tell) and I'm out of ideas. Can anyone toss me a line here? Or at least some coffee? (No milk, no sugar, strong enough to use as solvent)

if using cbbe, follow the bodyslide at attach (just the group filter and slideset, edit the body like you wanna after using that settings), after done you must run Fnis .

Try also http://skyrim.nexusmods.com/mods/34713 , i just prefer using tender one, that ones goes like a jelly, not a good at least for me,but try.

 

 

Tried it, and the top two checkboxes in batch build (The body ones) cause it to not be able to save the body. If I check all the clothing ones then it saves them, but still no luck getting them in game. I attached a screen of the settings I'm using in case any of them are too extreme. Please take a look

 

Oh, the steps I've been taking are, in order

Install body mod of course (Body physics, basic caliente body, then the plus plus body, then no-ma'am idles), install Bodyslide as normal and set to admin always. After getting settings taken care of I use FNIS (I use it all the time, surprised I don't use it after I eat lol) and then load my last save. If that crashes I try and auto save, and if that doesn't work then I go back to the 'just finished char creation and walkig to the chopping block' save. If THAT doesn't  work, then I drink more coffee and keep looking for tutorials or help.

 

Look at your folder if dnt got the attribute read-only, mine its like that before i can save my presets also.

Edited: founded that also http://www.loverslab.com/topic/14834-chsbhc-converted-to-tbbp/ i using cbbe, idk about chsbhc, looks like that guy made  link http://www.loverslab.com/topic/14834-chsbhc-converted-to-tbbp/?do=findComment&comment=334685 right him post.

[ArielFetters]

What do you mean by read only? What files? I'm sorry for being demanding but I have to computer programming talent of a dead frog lol >.<

[Deedlit]

What do you mean by read only? What files? I'm sorry for being demanding but I have to computer programming talent of a dead frog lol >.<

the entire folder, right click at entire bodyslide folder (goes more faster, active read- only, click apply and ok, do same again and remove the option read only, doing like that dnt need search what folder or file goes with read attrib only, and ill remove that attrib). i cant post my pics to show how because its on another language, you will not undestand i guess, that why.

[ArielFetters]

 

What do you mean by read only? What files? I'm sorry for being demanding but I have to computer programming talent of a dead frog lol >.<

the entire folder, right click at entire bodyslide folder (goes more faster, active read- only, click apply and ok, do same again and remove the option read only, doing like that dnt need search what folder or file goes with read attrib only, and ill remove that attrib). i cant post my pics to show how because its on another language, you will not undestand i guess, that why.

 

 

I tried like you suggested and I can create the preset I want, clicking on create body works, but I'm still getting errors when I try to batchbuild all options. Do I need to create the preset and body, exit Bodyslide, run FNIS, then reboot Bodyslide and do the batchbuild?

[Deedlit]

preset and body, exit Bodyslide, run FNIS, then reboot Bodyslide and do the batchbuild , toke your sentence to save time, sorry, but i guess dnt hurts, i do that all times, idk i prefer have sure and avoid problems, but you are using CHSBHC  and im using CBBE its really alot different the bodies, i dnt know if works on same way, i founded a link with a person wich said got the tbbp working ,try that link http://www.loverslab.com/topic/14834-chsbhc-converted-to-tbbp/?do=findComment&comment=334685 or that one http://skyrim.nexusmods.com/mods/31349 .

[ArielFetters]

preset and body, exit Bodyslide, run FNIS, then reboot Bodyslide and do the batchbuild , toke your sentence to save time, sorry, but i guess dnt hurts, i do that all times, idk i prefer have sure and avoid problems, but you are using CHSBHC  and im using CBBE its really alot different the bodies, i dnt know if works on same way, i founded a link with a person wich said got the tbbp working ,try that link http://www.loverslab.com/topic/14834-chsbhc-converted-to-tbbp/?do=findComment&comment=334685 or that one http://skyrim.nexusmods.com/mods/31349 .

 

 

I switched back to CBBE, and now I'm back to my original problem, so it's progress of a sort lol. I can make the body, I can run the batchbuild. With the clothes on my char still has the CHSBHC body, but naked she's got the standard CBBE Curvy body. I'm goingto uninstall/reinstall, drop all the CHSBHC stuff and go back to nothing but CBBE stuff. I'll install just the basic CBBE clothes and see if that fixes my problem

[Deedlit]

i guess you will need redo all armors at bodyslide also, if dnt works, will need remove all and take one by one after, looks like so its a armor with the chsbhc(omg complicated name) still or already have that skeleton, the problem reside on that, wich one have the skeleton(try first the mod packs ones, like the ones wich replace vanilla, because if occurs with alot vanilla armors its that).

[ArielFetters]

Once I switched back to CBBE everything worked on defaults, though no pregnant belly modded body. Still, the game's playable so I'll stop poking at it lol. Ah well, Corruptor armor's awesome (Especially since I have mine upgraded to legendary with a ton of assassin mods lol) and Castanic Horns help in the awesome department too. Sco'atel Penscobot (Double-arm) bows are also a ton of fun. Of course it helps that it lights people on fire, sucks their souls out, and regen's my health with each shot Then of course there's the two Infinity blades with the same enchantments for when things get up close, and of course once I get back into the Dawnguard Quests I can just insta-kill anyone I can sneak up on lol.

[dauf]

Once I switched back to CBBE everything worked on defaults, though no pregnant belly modded body. Still, the game's playable so I'll stop poking at it lol. Ah well, Corruptor armor's awesome (Especially since I have mine upgraded to legendary with a ton of assassin mods lol) and Castanic Horns help in the awesome department too. Sco'atel Penscobot (Double-arm) bows are also a ton of fun. Of course it helps that it lights people on fire, sucks their souls out, and regen's my health with each shot Then of course there's the two Infinity blades with the same enchantments for when things get up close, and of course once I get back into the Dawnguard Quests I can just insta-kill anyone I can sneak up on lol.

 All you need to know to use cb++ is on the first post, in particular the first point "read the description".

 

To summarise, to make a complete instal you need CBBE 3.2, caliente armors pack, mak armors pack with good version number,  the 8 CB++ files  and a matching skeleton, no more no less and install in this order.

To install this correctly, do it manually! you mix all these files in a temporary "Caliente tools" folder and then copy it in the  "data" folder.

 

To fix the batchbuild errors, you will have to clean the Slidergroups files from the armors you didn't install, edit with notepad. Once you have cleaned them, you should know which groups you have to batchbuild to cover all armors. Don't batchbuild cb++ body, use the "build this body" button instead.

 

To check you correctly installed an armor: Open the Sliderset file, read the "setfolder" and the "sourcefile" entries, and check you can find  the sourcefile in shapedata/setfolder/. (The "outputpath" and "outputfile" entries, let you find the file created by bodyslide in your data folder after you run it)

 

Bodyslide don't need FNIS, just run it before you play.

[jossilva]

Hi.

jiggle butt d'ont work on walking... any idea?

(cbbe tbbp xp32ms bodyslide)

Thanks.

[darkshot64]

So, just to be clear, the armors do match my body but there isn't any bounce to anything. That's how it's supposed to be right? Has there been anything that changes that?

[Liuli]

So, just to be clear, the armors do match my body but there isn't any bounce to anything. That's how it's supposed to be right? Has there been anything that changes that?

 

Yes, the bounce will only be there when the charcter is naked. There are a few exceptions, very few, of armors that were specifically created for TBBP. Searching the forums here for TBBP armor should probably result in the thread that links to all of them.

[akroma3310]

Perhaps this is a good time to ask for assistance. I'm having a problem with CBBE, specifically, when using it in conjunction with CB++ and TBBP animations, as well as a problem with the slider. The latter can come first, as I'm sure there is a simple solution. What I am trying to accomplish is changing body meshes via the slider, but after the initial instillation, the mesh never changes and I believe it is due to an error in the output path. I've never edited a .xml file before. If the outpath is correct, I should be able to change my body mesh as many times as I desire, without having to reinstall the CBBE mod every time I wish to change the mesh?

 

As to the second question: I've installed (in this order) the skeleton, TBBE animations, CBBE, CB++ and generated the meshes but I'm still not seeing any movement!

 

I'd appreciate a step-by-step or a PM if at all possible!

 

Thanks!

[lordofthedread]

Perhaps this is a good time to ask for assistance. I'm having a problem with CBBE, specifically, when using it in conjunction with CB++ and TBBP animations, as well as a problem with the slider. The latter can come first, as I'm sure there is a simple solution. What I am trying to accomplish is changing body meshes via the slider, but after the initial instillation, the mesh never changes and I believe it is due to an error in the output path. I've never edited a .xml file before. If the outpath is correct, I should be able to change my body mesh as many times as I desire, without having to reinstall the CBBE mod every time I wish to change the mesh?

 

As to the second question: I've installed (in this order) the skeleton, TBBE animations, CBBE, CB++ and generated the meshes but I'm still not seeing any movement!

 

I'd appreciate a step-by-step or a PM if at all possible!

 

Thanks!

 

Hope you got my PM and it was clear enough so you had your TBBP up and .... bouncing.

 

You can post it here for others if you think it was helpful.

[Endy]

I'm having some problems with this also. Spent a couple of hours on this and it's driving me nuts !

 

Progress so far:

 

- Downloaded CB++

- Installed XPMS with NMM, default settings.

- Installed CBBE.

- Installed Realistic Ragdolls & force as per XPMS requirements.

 

1. In CB++, I can see the CB++ Body TBBP option, so I select that, customize it, click build.

2. Run FNIS

3. Enter game, verify that changes are made. Works ok.

 

No bouncy or jiggly. Where am I going wrong ? I undress a random NPC and there's no action

 

Do I actually need to add the DragonFly's animation files somewhere somehow ? I don't see any instructions as to what/how/where ?

 

Any help appreciated !

 

[Owrom]

install XPms last, that mean after CBBE TBBP and all other, overwrite yes

 

"Do I actually need to add the DragonFly's animation files somewhere somehow ?"

yes, only these provide any animations which you are looking for all other mentioned before are compatible to these jiggly stuff, but don't do that by their own.

 

test this and any tbbp animation naked. you may know any armor can have it's own behavior and body implemented.

a cb++ created body with a bigger butt or breast may help too (but that's another thing (where other fails may be selectd)).

[Endy]

Still no luck.

 

Just to get this out of the way, basically after installing CBBE, TBBP and XPMS (last), I should be able to generate the body with CB++ and run FNIS at any time ? Or do I have to re-install the XPMS each time I generate a body ?

[Endy]

Finally got it working ! No idea what I did right lol.

 

Seems it's up to the animation whether it supports the jiggling or not ? I ran anims through Sexlab, and it seems that the ones by Arrok have jiggling boobs but not ass, and the ones by AP have neither.