Arcturus7777 Posted June 25, 2017 Posted June 25, 2017 This is not a question, I just found it weird. I am starting a new playthru, and decided not to use Realvision enb, and just enboost. After loading 176 mods, I started playing and noticed the framerate was about 120 plus. opening a chest sent all nearby objects flying. So I read the Enboost instructions, and set framerate to a max of 60, which fixed the problem, except now I had horrible stutter, lasting full seconds, again I read the thread and found new setting for enb 308 that I removed and the stutter was gone, Yippee. So I am playing my new toon, and I see slight tearing in the lower part of the screen, but decide to ignore it, about level 8 I find that the game is crashing entering or exiting buildings. I remove every mod that I have not used before, and start over, and about level 8 still crashing. Since all the new problems were fixed in ENBoost, I decide, to reinstall realvision ENB, which was working, but with low framerate in previous playthrus. I drop back the ENB 2.79 and install realvision, and now my frame rate sucks, at 40, BUT I load the latest save, and go in and out of the building fine. Add back all the new mods, still fine. lessen learned, if it ain't broke don't fix it.
ToJKa Posted June 25, 2017 Posted June 25, 2017 Hmm, having some issues with 308 too, i'll drop to 279 and see if it's better. Regardless, i find it hilarious that a game that looks like this stutters on a system with i7-6700k and GTX 1080
allsunday Posted June 25, 2017 Posted June 25, 2017 This is not a question, I just found it weird. I am starting a new playthru, and decided not to use Realvision enb, and just enboost. After loading 176 mods, I started playing and noticed the framerate was about 120 plus. opening a chest sent all nearby objects flying. So I read the Enboost instructions, and set framerate to a max of 60, which fixed the problem, except now I had horrible stutter, lasting full seconds, again I read the thread and found new setting for enb 308 that I removed and the stutter was gone, Yippee. So I am playing my new toon, and I see slight tearing in the lower part of the screen, but decide to ignore it, about level 8 I find that the game is crashing entering or exiting buildings. I remove every mod that I have not used before, and start over, and about level 8 still crashing. Since all the new problems were fixed in ENBoost, I decide, to reinstall realvision ENB, which was working, but with low framerate in previous playthrus. I drop back the ENB 2.79 and install realvision, and now my frame rate sucks, at 40, BUT I load the latest save, and go in and out of the building fine. Add back all the new mods, still fine. lessen learned, if it ain't broke don't fix it. "I read the thread and found new setting for enb 308 that I removed and the stutter was gone, Yippee." What thread was this and what was this setting? Please share. Thanks.
Arcturus7777 Posted June 25, 2017 Author Posted June 25, 2017 This is not a question, I just found it weird. I am starting a new playthru, and decided not to use Realvision enb, and just enboost. After loading 176 mods, I started playing and noticed the framerate was about 120 plus. opening a chest sent all nearby objects flying. So I read the Enboost instructions, and set framerate to a max of 60, which fixed the problem, except now I had horrible stutter, lasting full seconds, again I read the thread and found new setting for enb 308 that I removed and the stutter was gone, Yippee. So I am playing my new toon, and I see slight tearing in the lower part of the screen, but decide to ignore it, about level 8 I find that the game is crashing entering or exiting buildings. I remove every mod that I have not used before, and start over, and about level 8 still crashing. Since all the new problems were fixed in ENBoost, I decide, to reinstall realvision ENB, which was working, but with low framerate in previous playthrus. I drop back the ENB 2.79 and install realvision, and now my frame rate sucks, at 40, BUT I load the latest save, and go in and out of the building fine. Add back all the new mods, still fine. lessen learned, if it ain't broke don't fix it. "I read the thread and found new setting for enb 308 that I removed and the stutter was gone, Yippee." What thread was this and what was this setting? Please share. Thanks. I do not remember the settings names, but I know where to find the on the nexus. go to the original ENBoost mod. In the description near top is a link to latest version, click on the link. read the description, until you find something about memory and copying only the Threads part into the INI. I forget which ini, but it tells you. change those two settings to 0(zero) they are 3 and 2 as installed. this is something new in enb 308.
Arcturus7777 Posted June 25, 2017 Author Posted June 25, 2017 Hmm, having some issues with 308 too, i'll drop to 279 and see if it's better. Regardless, i find it hilarious that a game that looks like this stutters on a system with i7-6700k and GTX 1080 I agree. maybe I should install the game on a computer that does not have the min requirements. LOL I think, the realvision is part of the fix, as it is very well documented, and gives edits for the ini's
allsunday Posted June 25, 2017 Posted June 25, 2017 This is not a question, I just found it weird. I am starting a new playthru, and decided not to use Realvision enb, and just enboost. After loading 176 mods, I started playing and noticed the framerate was about 120 plus. opening a chest sent all nearby objects flying. So I read the Enboost instructions, and set framerate to a max of 60, which fixed the problem, except now I had horrible stutter, lasting full seconds, again I read the thread and found new setting for enb 308 that I removed and the stutter was gone, Yippee. So I am playing my new toon, and I see slight tearing in the lower part of the screen, but decide to ignore it, about level 8 I find that the game is crashing entering or exiting buildings. I remove every mod that I have not used before, and start over, and about level 8 still crashing. Since all the new problems were fixed in ENBoost, I decide, to reinstall realvision ENB, which was working, but with low framerate in previous playthrus. I drop back the ENB 2.79 and install realvision, and now my frame rate sucks, at 40, BUT I load the latest save, and go in and out of the building fine. Add back all the new mods, still fine. lessen learned, if it ain't broke don't fix it. "I read the thread and found new setting for enb 308 that I removed and the stutter was gone, Yippee." What thread was this and what was this setting? Please share. Thanks. I do not remember the settings names, but I know where to find the on the nexus. go to the original ENBoost mod. In the description near top is a link to latest version, click on the link. read the description, until you find something about memory and copying only the Threads part into the INI. I forget which ini, but it tells you. change those two settings to 0(zero) they are 3 and 2 as installed. this is something new in enb 308. Aw, dangit. I thought it was something I haven't heard of. You're talking about the [THREADS] part in enblocal.ini where you may or may not want to set DataSyncMOde=0 and PriorityMode=0. Sometimes others found setting it to 2 and 3 respectively will help but sadly I found no change in my game under any configuration.
Arcturus7777 Posted June 26, 2017 Author Posted June 26, 2017 This is not a question, I just found it weird. I am starting a new playthru, and decided not to use Realvision enb, and just enboost. After loading 176 mods, I started playing and noticed the framerate was about 120 plus. opening a chest sent all nearby objects flying. So I read the Enboost instructions, and set framerate to a max of 60, which fixed the problem, except now I had horrible stutter, lasting full seconds, again I read the thread and found new setting for enb 308 that I removed and the stutter was gone, Yippee. So I am playing my new toon, and I see slight tearing in the lower part of the screen, but decide to ignore it, about level 8 I find that the game is crashing entering or exiting buildings. I remove every mod that I have not used before, and start over, and about level 8 still crashing. Since all the new problems were fixed in ENBoost, I decide, to reinstall realvision ENB, which was working, but with low framerate in previous playthrus. I drop back the ENB 2.79 and install realvision, and now my frame rate sucks, at 40, BUT I load the latest save, and go in and out of the building fine. Add back all the new mods, still fine. lessen learned, if it ain't broke don't fix it. "I read the thread and found new setting for enb 308 that I removed and the stutter was gone, Yippee." What thread was this and what was this setting? Please share. Thanks. I do not remember the settings names, but I know where to find the on the nexus. go to the original ENBoost mod. In the description near top is a link to latest version, click on the link. read the description, until you find something about memory and copying only the Threads part into the INI. I forget which ini, but it tells you. change those two settings to 0(zero) they are 3 and 2 as installed. this is something new in enb 308. Aw, dangit. I thought it was something I haven't heard of. You're talking about the [THREADS] part in enblocal.ini where you may or may not want to set DataSyncMOde=0 and PriorityMode=0. Sometimes others found setting it to 2 and 3 respectively will help but sadly I found no change in my game under any configuration. yes, that worked for me, setting them to zero.
ToJKa Posted June 26, 2017 Posted June 26, 2017 292 gets me 15 fps Well, once again it's time for this shit to go fuck itself. I already have a full time job, and i get paid for doing it.
Sladen2019 Posted June 26, 2017 Posted June 26, 2017 Try the tips provided from this link. Involves editing Skyrim.ini line under the [HAVOK] section. https://steamcommunity.com/app/489830/discussions/0/282992562608905989/
Recommended Posts
Archived
This topic is now archived and is closed to further replies.