Vaginaless Guide for 3BA

[Cream_sicle]

11 hours ago, WulfN7 said:

Anyone know how you get it to work with elves? Works fine for the human races but i get a seam along the crotch/schlong for elves.

NVM. This mod fixed it.

You DO NOT NEED Assorted Futanari Texture Patches, as dw's Vaginaless CBBE 3BA already has the vaginaless schlong texture patch included in the downloadable files section! The Assorted Futanari Texture Patches mod was made to patch the textures of schlongs specifically to be fitted on to the default 3BA body mesh (with vagina).
 

If there is a texture seam or mismatch in your player character's skin vs the schlong skin, it means you either:

• Do not have the correct vaginaless texture patch enabled and/or not overwriting the default schlong add-on's texture. (This only applies if you are going the non-unique character route.)
• Have not downloaded and/or placed the proper texture patch files generated from the dw's Vaginaless CBBE 3BA (Installer - [Your Chosen Schlong Add-on] Textures - [Your Chosen Skin]) to the appropriate RaceMenu Selector of Skins folder. (This only applies if you are going the unique character route.)

(For either above refer to Step 8.)

 

It is also recommended (but not necessary) to disable the (Installer - [Your Chosen Schlong Add-on] Textures - [Your Chosen Skin]) after installing, but ONLY if you're using TNG in conjunction with Selector of Skins and plan to still use the default schlong add-on (on NPCs for example). However if you are using SOS, (Installer - [Your Chosen Schlong Add-on] Textures - [Your Chosen Skin]) must stay enabled, but I am not 100% positive as I have not tested it.

Edited April 7 by Cream_sicle

[Vanech N7]

8 hours ago, Cream_sicle said:

You DO NOT NEED Assorted Futanari Texture Patches, as dw's Vaginaless CBBE 3BA already has the vaginaless schlong texture patch included in the downloadable files section! The Assorted Futanari Texture Patches mod was made to patch the textures of schlongs specifically to be fitted on to the default 3BA body mesh (with vagina).
 

If there is a texture seam or mismatch in your player character's skin vs the schlong skin, it means you either:

• Do not have the correct vaginaless texture patch enabled and/or not overwriting the default schlong add-on's texture. (This only applies if you are going the non-unique character route.)
• Have not downloaded and/or placed the proper texture patch files generated from the dw's Vaginaless CBBE 3BA (Installer - [Your Chosen Schlong Add-on] Textures - [Your Chosen Skin]) to the appropriate RaceMenu Selector of Skins folder. (This only applies if you are going the unique character route.)

(For either above refer to Step 8.)

 

It is also recommended (but not necessary) to disable the (Installer - [Your Chosen Schlong Add-on] Textures - [Your Chosen Skin]) after installing, but ONLY if you're using TNG in conjunction with Selector of Skins and plan to still use the default schlong add-on (on NPCs for example). However if you are using SOS, (Installer - [Your Chosen Schlong Add-on] Textures - [Your Chosen Skin]) must stay enabled, but I am not 100% positive as I have not tested it.

I did all of the above but it still gave me the seam. Only for elves like i said. Breton, nords, etc it works fine. Not sure why.

[Cream_sicle]

1 hour ago, WulfN7 said:

I did all of the above but it still gave me the seam. Only for elves like i said. Breton, nords, etc it works fine. Not sure why.

I just checked my game and it works fine for elves.

 

Did you make sure this mod is disabled Unique Character? The reason why I'm asking is because this old unique character mod has separate file paths for the elven races (Dark Elf, High Elf, Orc, Wood Elf), and these additional file paths could be interfering with RaceMenu Selector of Skin's file path structure. 

Edited April 8 by Cream_sicle

[Vanech N7]

On 4/8/2026 at 1:23 AM, Cream_sicle said:

I just checked my game and it works fine for elves.

 

Did you make sure this mod is disabled Unique Character? The reason why I'm asking is because this old unique character mod has separate file paths for the elven races (Dark Elf, High Elf, Orc, Wood Elf), and these additional file paths could be interfering with RaceMenu Selector of Skin's file path structure. 

I disabled Unique Character and the Texture for the schlong per instruction. I moved the textures from S:\Modding\MO2\mods\dw's Vaginaless 3BA v2 - TRX-ERF Hybrid Schlong textures (BnP Skin)\textures\[TRX] futa addon\Regular\default >>> S:\Modding\MO2\mods\Selector of Skins - No Assets\textures\actors\character\unique\female


EDIT: I reinstalled everything from scratch and it works fine now. Not sure what i was doing wrong before, but i notice now i can select a [TRX] Unqiue Futa Schlong option in TNG i did not have before, and it has the correct textures.
 

 

Edited April 9 by WulfN7

[kimimiar]

Thanks for the tutorial, I learned a lot! I have a small question: it seems that using SoS can only overwrite the original texture, otherwise it won't work.

[Vanech N7]

Would anyone happen to know why the Racemenu Selector of Skins weight slider isn't working? the slider works fine on the default skin, but once i change over to "1" the weight slider does nothing. I built both bodies with zeroed sliders.

[Cream_sicle]

7 hours ago, WulfN7 said:

Would anyone happen to know why the Racemenu Selector of Skins weight slider isn't working? the slider works fine on the default skin, but once i change over to "1" the weight slider does nothing. I built both bodies with zeroed sliders.

The reason why moving the RaceMenu weight slider does "nothing" after changing the Body and Skin slider to "1", is because you've set both the high and low weight sliders to the same or equal value already. This is intended as when you build the Body using the - Zeroed Slider - Preset, it sets both the high and low weight slider values to zero.

If you want the RaceMenu weight slider to "work" you need follow these steps.

1. Download a BodySlide Preset that has different configured values for both high and low weights. (DO NOT BUILD THIS PRESET!) Make sure the mod is then enabled.
2. Launch game, open the OBody menu, then select and load the preset you've just downloaded onto your character.
3. Open RaceMenu and move the weight slider.

If everything was done correctly, you should notice the change in your character's weight when moving the weight slider in RaceMenu.

However if it is still not working, check to make sure the RaceMenu Selector of Skins folder \meshes\actors\character\unique\female contains the femalebody.tri file. If it does not, then you must redo the entirety of the Unique Character section in Step 3. Do Remember to check the Build Morphs option in the lower left-hand corner of the BodySlide tool window before building the Body.

Edited April 24 by Cream_sicle

[Vanech N7]

41 minutes ago, Cream_sicle said:

The reason why moving the RaceMenu weight slider does "nothing" after changing the Body and Skin slider to "1", is because you've set both the high and low weight sliders to the same or equal value already. This is intended as when you build the Body using the - Zeroed Slider - Preset, it sets both the high and low weight slider values to zero.

If you want the RaceMenu weight slider to "work" you need follow these steps.

1. Download a BodySlide Preset that has different configured values for both high and low weights. (DO NOT BUILD THIS PRESET!) Make sure the mod is then enabled.
2. Launch game, open the OBody menu, then select and load the preset you've just downloaded onto your character.
3. Open RaceMenu and move the weight slider.

If everything was done correctly, you should notice the change in your character's weight when moving the weight slider in RaceMenu.

That's exactly what i did, but when i switch to the "1" slider on Racemenu Selector of Skins i can only see the neck/wrists weight moving. Which should indicate i didn't build the meshes right but i've done it twice now, the second time even building the meshes outside the folder and dragging them into the Selector of Skins/Unique/Female folder to make sure for some reason it wasn't sending the meshes somewhere else.

[Cream_sicle]

1 hour ago, WulfN7 said:

That's exactly what i did, but when i switch to the "1" slider on Racemenu Selector of Skins i can only see the neck/wrists weight moving. Which should indicate i didn't build the meshes right but i've done it twice now, the second time even building the meshes outside the folder and dragging them into the Selector of Skins/Unique/Female folder to make sure for some reason it wasn't sending the meshes somewhere else.

I found the problem. It seems to be an issue or limitation with OBody itself and not with RaceMenu Selector of Skins. Reading the OBody NG Troubleshooting Guide offered this solution.

"6) When I change my character's weight in Racemenu, the weight does not change at all.

This is somewhat related to the problem above. For the weight change to reflect on your character, do the following steps:

1. Change the character's weight in Racemenu to the desired value
2. Save changes to exit Racemenu
3. Open the OBody menu
4. Give the character a different preset
5. Open the OBody menu again
6. Give the character the preset you actually want

The weight should now be properly updated."

While having an OBody BodySlide Preset loaded onto our character, It seems we are unable to view the weight changes, at least when trying to move the weight slider while in RaceMenu. 😢
Fortunately, you can still apply the weight changes through this guide, but it is not ideal.

Edited April 24 by Cream_sicle

[RickV01]

Is it possible to build a standalone Serana replacer with this specific body preset? Also, is this guide the right way to go about it? 
 

thanks in advance

[Cream_sicle]

10 hours ago, RickV01 said:

Is it possible to build a standalone Serana replacer with this specific body preset? Also, is this guide the right way to go about it? 
 

thanks in advance

This guide's main focus is to provide more clarity on how to install and replace the 3BA body mesh with a vaginaless variant OR on how to import the vaginaless body mesh to your female player character only (Unique Character), without having to replace the 3BA body mesh of ALL female NPCs.

From my understanding NPC replacers generally use their own file path, so this guide wouldn't be much help. However you can try to do it yourself by using the resources provided by these mods. You would need to replace the body mesh and textures provided by the Serana replacer mod with the ones provided by dw's Vaginaless mod. 

Edited April 27 by Cream_sicle

[big smoke9]

im on step 8 part 1 and for some reason theres no female folder under RaceMenu Selector of Skins \textures\actors\character\unique\

there is only male



should i make my own, or is this not normal?

Edited May 19 by big smoke9

[Cream_sicle]

35 minutes ago, big smoke9 said:

im on step 8 part 1 and for some reason theres no female folder under RaceMenu Selector of Skins \textures\actors\character\unique\

there is only male



should i make my own, or is this not normal?

No this is not normal, the folder was either deleted or moved somewhere else.
Yes, remaking the folder should fix this.

[papajack]

On 3/5/2026 at 7:10 PM, papajack said:

well, managed to get the hands/feet! Problem: there's seams so I assume I used a different preset to build those.... But I got hands and feet! Now there's only to figure out how I'm going to tackle clothing meshes and see about rebuilding the body

well, I think I got the hang of it now!!!

[RunicGray]

I'm on the slow journey of migrating everything and getting it working on Linux now, so hopefully I can get my lovely boys up and running again. 😭

[Sissy-Amber132]

Hi! i tried to follow this step by step guide as best as i could, but i arrived at an issue. my skin textures work for everything besides my head and hands. i tried to bring my body texture lower in the load order, but that didn't work. any solutions that you may have? here is my load order/modlist and a picture of the issue:

loadorder.txt modlist.txt

[RunicGray]

On 11/8/2025 at 3:22 AM, Cream_sicle said:

 

SOS compatible only - 

 

 

Note: ERF Futanari CBBE SSE Uncut for 3BA Vaginaless requires the original -

 

 

Just wanted to raise that these ones marked SOS Only do also have patches for TNG under the name "The New Gentlewoman" on Nexus!  https://www.nexusmods.com/skyrimspecialedition/mods/105649? I'm trying TNG this time around instead of SoS, so I'll let you know how it goes when I get to it.