Jump to content

Transfer Settlements - National Park Visitor's Centre Redux

msmfoster

Recommended Posts

msmfoster

msmfoster

Posted
Posted

Transfer Settlements - National Park Visitor's Centre Redux

View File

A Transfer Settlements blueprint that transforms the Visitor's Centre from a prepper's home to a rebuilt and viable settlement. In addition to the repairs, buildings have been added to increase defence, food production, and commercial spaces.

 

Note. This build aims for a repaired look, not restored to its former glory. This means there are brick walls on the second level facing the deck, and the roof is replaced with a barn variant for easy support of turrets.

 

Details on the changes below:

  • Visitor's Centre has been repaired with the inside walls removed to create a more viable living area.
  • Dedicated medical area with surgical bay and recovery ward within the Visitor's Centre.
  • A lovely deck gym above the main entrance of the Visitor's Centre.
  • The small hut near the parking area now has walls that create a viable kitchen and eating area.
  • Two additional commercial spaces have been added along the retaining wall overlooking the parking area.
  • A large greenhouse has been added opposite the Visitor's Centre for food production and defence. The far side of the greenhouse effectively acts as a wall to force attackers around the structure.
  • Parking area now includes vintage cars.

 

Note. These cars can and do explode if they take damage.

 

Some of the features of this build are:

  • 24 bunks.
  • 170+ food.
  • 530+ defence.
  • 240 power.
  • 60 water.
  • Tier 3 Medical, Restaurant, Clothing, and General Store.
  • Dedicated gym area.
  • Vault-Tec drink dispenser and slot machines.
  • Working sinks and showers.
  • Power mostly runs through conduits to minimise visible power lines.
  • Cat and dog included in the build.
  • No visible glitches observed with this build.

 

Due to the layout, there is no dedicated workshop area. Instead, the armour, weapons, and chemistry workbenches have been added to the general store. This fits in with the overall theme of this build.

 

Requirements

 

Downloadable Content

  • Contraptions Workshop
  • Vault-Tec Workshop
  • Wasteland Workshop
  • Far Harbour
  • Enclave Remnants

 

Hard Requirements

 

Note. Transfer Settlements will not add items if the mods are missing. The following are not required but will remove associated elements.

 

Soft Requirements

 

Nice to Have

 

Unrelated But Useful

 

Setup

 

Clearing the area is relatively straightforward. Clear out the area of clutter, trash, foliage, and deadfall. Additionally, remove the junk wall fortifications, which are not needed once the outbuildings provide viable defences. For the Visitor's Centre itself, clean the site, remove the entire roof structure, floors, and internal walls.

 

The exceptions to this are:

  • The doorways and associated walls on either side of the stairwell.
  • The stairs themselves.

 

You can opt to maintain the deck flooring in place; it may help NPCs use the existing stairs to travel back and forth.

 

Note. Be sure to remove the Vim! machine. A new one will be added in its place. Nuka-Cola will then begin to appear around the machine as it respawns.

 

Build a Transfer Settlements console from Power > Miscellaneous in front of the settlement workshop.

 

Note. Import should be done with Workshop Mode enabled.

 

After Blueprint Import

 

Ensure power and defences are online.

 

Potential Issues

 

Transfer Settlements recommends that you leave the area after the blueprint has been implemented, but saving on site has always led to a hard crash (for me). To save, you need to move out of the area, but I found that doing coc FarHarborExt from the console is the easiest way to get away and save.

 

I recommend that you import/export blueprints using the Stable defaults. Using other methods has caused ladders, walls, and flooring to be visible but without collision. In many cases, the collision effects are found elsewhere, leading to interesting behaviours among the NPC population, leading to a snap-back effect as you push through an area and are forced back by the invisible wall.

 

Note. While Settlement Objects Expansion elements have been stable in the past, this is not always the case. This blueprint was tested with Transfer Settlements working under Stable.

 

A Special Thanks To

 

Thank you to Caladon for creating the template that makes blueprints installable.

 

Thank you to PiCSeL for the magazine and painting retextures seen in the screenshots.

  • Submitter
    msmfoster
  • Submitted
    11/07/2025
  • Category
    Sexual Content
  • Requirements
    Transfer Settlements, Scrap Everything, Homemaker, Settlement Objects Expansion Pack

 

msmfoster

msmfoster

Posted
  • Author
Posted
21 hours ago, yaboiied said:

where do i get those fallout 3/nv turrets

Its part of the NG patch for Fallout 4. Enclave Remnants as shown in the DLC requirements. 

msmfoster

msmfoster

Posted
  • Author
Posted
4 hours ago, katrina.balanchuk said:

Looks nice!
But, Enclave remnants is a requirement?

So its limited to .984 users? 

(since .163 users cannot log on to Bethnet to get Enclave remnants even if we wanted to)

To import this blueprint fully? Yes. However, the blueprint can be modified to replace the turrets. The Transfer Settlements Blueprint Editor from Nexus will automatically change them all to heavy gun turrets (with the click of a button), but getting the base Heavy Laser ID and replacing the Enclave one with that should work fine. Overall these are not radically different items, not like swapping a warehouse wall with a concrete one which have different ratios and thicknesses.

 

A quick look tells me this should be possible:

 

Enclave: 

            "FormID" : "21E",
            "FormID_dec" : 542,

 

and

  

            "name" : "Enclave Heavy Laser Turret",
            "plugin_name" : "ccotmfo4001-remnants.esl",

 

Heavy Laser Turret: 

            "FormID" : "22B59D",
            "FormID_dec" : 2274717,

 

and

  

            "name" : "Heavy Laser Turret",
            "plugin_name" : "Fallout4.esm",

 

The rest is about electrical links, scaling, and position. I tend to heavily interconnect my turrets to create redundant paths.

 

Doing a global search and replace should do it. I make no guarantees, but the attached .json file should work fine. Just let me know if it does and I'll release a variant accordingly.

 

bp_visitors_centre_redux_heavy_laser.json

msmfoster

msmfoster

Posted
  • Author
Posted
7 hours ago, looneyssc said:

Can i ask why do you put Transfer Settlements blueprints to Adult and Sex Mods category

Because they are sexualised. These builds include sex toys, mats that make settlers do sexual acts, and a few are designed specifically to run with Just Business and Human Resources. A lot are also designed with the idea that AAF scenes will be running in the background. The ones on Nexus have all those elements removed, save the Erotic Art and stripper poles. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...