Jump to content

Outfit Studio/Bodyslide 2 CBBE Conversions

XunAmarox

By XunAmarox,
in Skyrim Adult Mods

Recommended Posts

Levionte

Levionte

Posted
Posted

 

 

 

......

 

Hi Levionte,

 

the new files works (almost) nice. You´ve done a great job. Skirt and Corset appear again and fit prefect (for me), the bra clipping while moving is nearly gone, very nice. And the legwarmes now fit perfectly. Just to little things i could spot.

 

First:

The legwarmers clip throung the boots.

 

Second:

It seems, that the texture of the alternative legwarmer (the lace variant) is gone. Legwarmes on char appearing black. looks like Skyrim didn´t found a texture. But this coulb be my fault. perhaps i mess up something through installation.

 

*EDIT*

The color missmatch occurs also fpr all skirts, bras and boots. Whatever you craft, you always get the brown ones (skirt and boots) or a strange looking black bra.

 

Greetings

March

 

 

 

 

Hello Mart/March,

 

Thanks for the feedback. I'll take a look at the legwarmers/boots issue when I get the chance. I'm glad everything else is working okay; I'm afraid it may never be perfect but so long as it's usable I'll take it.

 

I'll take a look at the legwarmer textures too, as they also appear black in my game. With all due respect to the mod author as the outfit is well made, this just isn't an armor set I've used nor do I plan on using it so I honestly didn't realize that wasn't how it was supposed to look. Sorry about that.

 

As for the other color variations, the original mod is set up so that all color variations use the same mesh, but the textures get swapped via the esp; the exception being a single pair of gloves and the aforementioned legwarmers which I now suspect take advantage of alpha layers that I didn't account for. As bodyslide only deals with the meshes, that's the reason there's only one slider set for each article and that's the primary reason I decided to do this conversion, because I (quite foolishly, it seems) thought it would be quick and easy. So given that, and since the variations look fine in my game and no one else has commented on it, I'm going to assume it's something on your end. If you find more information that makes you think otherwise, be sure to let me know.

 

If it helps, "strange looking black" sounds a little bit like a vram issue though I couldn't say for certain without more information. But I'm really not qualified to diagnose vram and/or esp issues.

Kageryu

Kageryu

Posted
Posted

Hey Levionte, how are you able to convert armors so easily? I've tried to convert Aradia Gold Lady and Aradia ASX Dancer but they always came out deformed for me. I can't figure out how to make them conform properly to my sliders.

 

Can you do these simple outfits and explain how you converted them?

 

Aradia ASX Dancer

http://eiheispot1.blog.fc2.com/blog-entry-130.html

 

Aradia Gold Lady

http://eiheispot1.blog.fc2.com/blog-entry-46.html

 

All I was able to was manually move the nipple shield meshes to match my current body but even then, the meshes get warped and don't retain their shape. I'm not good with Outfit studio. -_-

Mart0206

Mart0206

Posted
Posted

 

 

 

 

......

 

Hi Levionte,

 

the new files works (almost) nice. You´ve done a great job. Skirt and Corset appear again and fit prefect (for me), the bra clipping while moving is nearly gone, very nice. And the legwarmes now fit perfectly. Just to little things i could spot.

 

First:

The legwarmers clip throung the boots.

 

Second:

It seems, that the texture of the alternative legwarmer (the lace variant) is gone. Legwarmes on char appearing black. looks like Skyrim didn´t found a texture. But this coulb be my fault. perhaps i mess up something through installation.

 

*EDIT*

The color missmatch occurs also fpr all skirts, bras and boots. Whatever you craft, you always get the brown ones (skirt and boots) or a strange looking black bra.

 

Greetings

March

 

 

 

 

Hello Mart/March,

 

Thanks for the feedback. I'll take a look at the legwarmers/boots issue when I get the chance. I'm glad everything else is working okay; I'm afraid it may never be perfect but so long as it's usable I'll take it.

 

I'll take a look at the legwarmer textures too, as they also appear black in my game. With all due respect to the mod author as the outfit is well made, this just isn't an armor set I've used nor do I plan on using it so I honestly didn't realize that wasn't how it was supposed to look. Sorry about that.

 

As for the other color variations, the original mod is set up so that all color variations use the same mesh, but the textures get swapped via the esp; the exception being a single pair of gloves and the aforementioned legwarmers which I now suspect take advantage of alpha layers that I didn't account for. As bodyslide only deals with the meshes, that's the reason there's only one slider set for each article and that's the primary reason I decided to do this conversion, because I (quite foolishly, it seems) thought it would be quick and easy. So given that, and since the variations look fine in my game and no one else has commented on it, I'm going to assume it's something on your end. If you find more information that makes you think otherwise, be sure to let me know.

 

If it helps, "strange looking black" sounds a little bit like a vram issue though I couldn't say for certain without more information. But I'm really not qualified to diagnose vram and/or esp issues.

 

 

Hi Levionte,

it is possible that i messed something up while installing on patch after another. I wait until you release a new file for the Aradia Kato Conversion and then i will install the whole mod again, incl. the original one. :)

 

Kolkpen

Kolkpen

Posted
Posted

If you're getting pitch black textures, try opening up the affected .nif(s), right click the affected mesh(es) and click Mesh -> Update Tangent Space.

 

IIRC, the black textures are a side effect of the "Smooth Normals" option in OS.

Kris†a™

Kris†a™

Posted
Posted

Во-первых, я хотел бы поблагодарить всех здесь, кто поддерживает это сообщество путем преобразования доспехи. :)

 

 

Запрос для преобразования [DEM] Ritual v1.5 для CBBE.

 

http://cgkrista.blogspot.in/2014/10/dem-ритуал-v15.html

http://www.DepositFiles.com/files/sfu39lkuu

 

Если кто хочет это сделать, пожалуйста, сделайте это. Спасибо. :)

hmm ... you have a solution?

Levionte

Levionte

Posted
Posted

 

 

 

 

......

 

Hi Levionte,

 

the new files works (almost) nice. You´ve done a great job. Skirt and Corset appear again and fit prefect (for me), the bra clipping while moving is nearly gone, very nice. And the legwarmes now fit perfectly. Just to little things i could spot.

 

First:

The legwarmers clip throung the boots.

 

Second:

It seems, that the texture of the alternative legwarmer (the lace variant) is gone. Legwarmes on char appearing black. looks like Skyrim didn´t found a texture. But this coulb be my fault. perhaps i mess up something through installation.

 

*EDIT*

The color missmatch occurs also fpr all skirts, bras and boots. Whatever you craft, you always get the brown ones (skirt and boots) or a strange looking black bra.

 

Greetings

March

 

 

 

Hello Mart/March,

 

Thanks for the feedback. I'll take a look at the legwarmers/boots issue when I get the chance. I'm glad everything else is working okay; I'm afraid it may never be perfect but so long as it's usable I'll take it.

 

I'll take a look at the legwarmer textures too, as they also appear black in my game. With all due respect to the mod author as the outfit is well made, this just isn't an armor set I've used nor do I plan on using it so I honestly didn't realize that wasn't how it was supposed to look. Sorry about that.

 

As for the other color variations, the original mod is set up so that all color variations use the same mesh, but the textures get swapped via the esp; the exception being a single pair of gloves and the aforementioned legwarmers which I now suspect take advantage of alpha layers that I didn't account for. As bodyslide only deals with the meshes, that's the reason there's only one slider set for each article and that's the primary reason I decided to do this conversion, because I (quite foolishly, it seems) thought it would be quick and easy. So given that, and since the variations look fine in my game and no one else has commented on it, I'm going to assume it's something on your end. If you find more information that makes you think otherwise, be sure to let me know.

 

If it helps, "strange looking black" sounds a little bit like a vram issue though I couldn't say for certain without more information. But I'm really not qualified to diagnose vram and/or esp issues.

 

 

Hi Levionte,

it is possible that i messed something up while installing on patch after another. I wait until you release a new file for the Aradia Kato Conversion and then i will install the whole mod again, incl. the original one. :)

 

 

Hi Mart,

 

I believe the issues have been fixed so give them a try. I'm not sure which patches you're referring to, but if you're talking about the patches on the Aradia Kato Outfit page on Nexus (bra patch and corset slot patch) I do not recommend using them as they will likely conflict with this bodyslide conversion.

 

Hey Levionte, how are you able to convert armors so easily? I've tried to convert Aradia Gold Lady and Aradia ASX Dancer but they always came out deformed for me. I can't figure out how to make them conform properly to my sliders.

 

Can you do these simple outfits and explain how you converted them?

 

Aradia ASX Dancer

http://eiheispot1.blog.fc2.com/blog-entry-130.html

 

Aradia Gold Lady

http://eiheispot1.blog.fc2.com/blog-entry-46.html

 

All I was able to was manually move the nipple shield meshes to match my current body but even then, the meshes get warped and don't retain their shape. I'm not good with Outfit studio. -_-

 

While I'd be happy to try and answer any specific questions you may have, it would be very difficult for me to explain the entire process any better than the numerous tutorials that are already out there on nexus and this site. The general idea is that you load the outfit with the reference shape of your preference (CBBE, CBBE HDT, etc.), use the mesh volume brushes to fit the outfit to your reference shape, hit Slider > conform to sliders on each object or conform all, and then go through each slider and resolve any clipping.

 

I know the learning curve is a little steep at first but once you get the basics down, it gets a lot easier to develop your technique. I only opened up Outfit Studio for the first time just a couple months ago. Best of luck, I look forward to seeing your conversions in the future.

Kageryu

Kageryu

Posted
Posted

 

 

 

 

 

......

 

Hi Levionte,

 

the new files works (almost) nice. You´ve done a great job. Skirt and Corset appear again and fit prefect (for me), the bra clipping while moving is nearly gone, very nice. And the legwarmes now fit perfectly. Just to little things i could spot.

 

First:

The legwarmers clip throung the boots.

 

Second:

It seems, that the texture of the alternative legwarmer (the lace variant) is gone. Legwarmes on char appearing black. looks like Skyrim didn´t found a texture. But this coulb be my fault. perhaps i mess up something through installation.

 

*EDIT*

The color missmatch occurs also fpr all skirts, bras and boots. Whatever you craft, you always get the brown ones (skirt and boots) or a strange looking black bra.

 

Greetings

March

 

 

 

Hello Mart/March,

 

Thanks for the feedback. I'll take a look at the legwarmers/boots issue when I get the chance. I'm glad everything else is working okay; I'm afraid it may never be perfect but so long as it's usable I'll take it.

 

I'll take a look at the legwarmer textures too, as they also appear black in my game. With all due respect to the mod author as the outfit is well made, this just isn't an armor set I've used nor do I plan on using it so I honestly didn't realize that wasn't how it was supposed to look. Sorry about that.

 

As for the other color variations, the original mod is set up so that all color variations use the same mesh, but the textures get swapped via the esp; the exception being a single pair of gloves and the aforementioned legwarmers which I now suspect take advantage of alpha layers that I didn't account for. As bodyslide only deals with the meshes, that's the reason there's only one slider set for each article and that's the primary reason I decided to do this conversion, because I (quite foolishly, it seems) thought it would be quick and easy. So given that, and since the variations look fine in my game and no one else has commented on it, I'm going to assume it's something on your end. If you find more information that makes you think otherwise, be sure to let me know.

 

If it helps, "strange looking black" sounds a little bit like a vram issue though I couldn't say for certain without more information. But I'm really not qualified to diagnose vram and/or esp issues.

 

 

Hi Levionte,

it is possible that i messed something up while installing on patch after another. I wait until you release a new file for the Aradia Kato Conversion and then i will install the whole mod again, incl. the original one. :)

 

 

Hi Mart,

 

I believe the issues have been fixed so give them a try. I'm not sure which patches you're referring to, but if you're talking about the patches on the Aradia Kato Outfit page on Nexus (bra patch and corset slot patch) I do not recommend using them as they will likely conflict with this bodyslide conversion.

 

Hey Levionte, how are you able to convert armors so easily? I've tried to convert Aradia Gold Lady and Aradia ASX Dancer but they always came out deformed for me. I can't figure out how to make them conform properly to my sliders.

 

Can you do these simple outfits and explain how you converted them?

 

Aradia ASX Dancer

http://eiheispot1.blog.fc2.com/blog-entry-130.html

 

Aradia Gold Lady

http://eiheispot1.blog.fc2.com/blog-entry-46.html

 

All I was able to was manually move the nipple shield meshes to match my current body but even then, the meshes get warped and don't retain their shape. I'm not good with Outfit studio. -_-

 

While I'd be happy to try and answer any specific questions you may have, it would be very difficult for me to explain the entire process any better than the numerous tutorials that are already out there on nexus and this site. The general idea is that you load the outfit with the reference shape of your preference (CBBE, CBBE HDT, etc.), use the mesh volume brushes to fit the outfit to your reference shape, hit Slider > conform to sliders on each object or conform all, and then go through each slider and resolve any clipping.

 

I know the learning curve is a little steep at first but once you get the basics down, it gets a lot easier to develop your technique. I only opened up Outfit Studio for the first time just a couple months ago. Best of luck, I look forward to seeing your conversions in the future.

 

 

I'm tired of trying and failing. I would to request these two outfits be converted someone who is clearly better than me.

 

http://eiheispot1.blog.fc2.com/blog-entry-130.html

ASX Dancer

 

http://eiheispot1.blog.fc2.com/blog-entry-46.html

Aradia Gold Lady.

Kyrien

Kyrien

Posted
Posted

 

 

 

 

 

......

 

Hi Levionte,

 

the new files works (almost) nice. You´ve done a great job. Skirt and Corset appear again and fit prefect (for me), the bra clipping while moving is nearly gone, very nice. And the legwarmes now fit perfectly. Just to little things i could spot.

 

First:

The legwarmers clip throung the boots.

 

Second:

It seems, that the texture of the alternative legwarmer (the lace variant) is gone. Legwarmes on char appearing black. looks like Skyrim didn´t found a texture. But this coulb be my fault. perhaps i mess up something through installation.

 

*EDIT*

The color missmatch occurs also fpr all skirts, bras and boots. Whatever you craft, you always get the brown ones (skirt and boots) or a strange looking black bra.

 

Greetings

March

 

 

 

Hello Mart/March,

 

Thanks for the feedback. I'll take a look at the legwarmers/boots issue when I get the chance. I'm glad everything else is working okay; I'm afraid it may never be perfect but so long as it's usable I'll take it.

 

I'll take a look at the legwarmer textures too, as they also appear black in my game. With all due respect to the mod author as the outfit is well made, this just isn't an armor set I've used nor do I plan on using it so I honestly didn't realize that wasn't how it was supposed to look. Sorry about that.

 

As for the other color variations, the original mod is set up so that all color variations use the same mesh, but the textures get swapped via the esp; the exception being a single pair of gloves and the aforementioned legwarmers which I now suspect take advantage of alpha layers that I didn't account for. As bodyslide only deals with the meshes, that's the reason there's only one slider set for each article and that's the primary reason I decided to do this conversion, because I (quite foolishly, it seems) thought it would be quick and easy. So given that, and since the variations look fine in my game and no one else has commented on it, I'm going to assume it's something on your end. If you find more information that makes you think otherwise, be sure to let me know.

 

If it helps, "strange looking black" sounds a little bit like a vram issue though I couldn't say for certain without more information. But I'm really not qualified to diagnose vram and/or esp issues.

 

 

Hi Levionte,

it is possible that i messed something up while installing on patch after another. I wait until you release a new file for the Aradia Kato Conversion and then i will install the whole mod again, incl. the original one. :)

 

 

Hi Mart,

 

I believe the issues have been fixed so give them a try. I'm not sure which patches you're referring to, but if you're talking about the patches on the Aradia Kato Outfit page on Nexus (bra patch and corset slot patch) I do not recommend using them as they will likely conflict with this bodyslide conversion.

The latest iteration works perfectly as I've tested. All colours and parts work without clipping or problems so far. 

Kudos.

Mart0206

Mart0206

Posted
Posted

 

 

 

 

 

......

 

Hi Levionte,

 

the new files works (almost) nice. You´ve done a great job. Skirt and Corset appear again and fit prefect (for me), the bra clipping while moving is nearly gone, very nice. And the legwarmes now fit perfectly. Just to little things i could spot.

 

First:

The legwarmers clip throung the boots.

 

Second:

It seems, that the texture of the alternative legwarmer (the lace variant) is gone. Legwarmes on char appearing black. looks like Skyrim didn´t found a texture. But this coulb be my fault. perhaps i mess up something through installation.

 

*EDIT*

The color missmatch occurs also fpr all skirts, bras and boots. Whatever you craft, you always get the brown ones (skirt and boots) or a strange looking black bra.

 

Greetings

March

 

 

 

Hello Mart/March,

 

Thanks for the feedback. I'll take a look at the legwarmers/boots issue when I get the chance. I'm glad everything else is working okay; I'm afraid it may never be perfect but so long as it's usable I'll take it.

 

I'll take a look at the legwarmer textures too, as they also appear black in my game. With all due respect to the mod author as the outfit is well made, this just isn't an armor set I've used nor do I plan on using it so I honestly didn't realize that wasn't how it was supposed to look. Sorry about that.

 

As for the other color variations, the original mod is set up so that all color variations use the same mesh, but the textures get swapped via the esp; the exception being a single pair of gloves and the aforementioned legwarmers which I now suspect take advantage of alpha layers that I didn't account for. As bodyslide only deals with the meshes, that's the reason there's only one slider set for each article and that's the primary reason I decided to do this conversion, because I (quite foolishly, it seems) thought it would be quick and easy. So given that, and since the variations look fine in my game and no one else has commented on it, I'm going to assume it's something on your end. If you find more information that makes you think otherwise, be sure to let me know.

 

If it helps, "strange looking black" sounds a little bit like a vram issue though I couldn't say for certain without more information. But I'm really not qualified to diagnose vram and/or esp issues.

 

 

Hi Levionte,

it is possible that i messed something up while installing on patch after another. I wait until you release a new file for the Aradia Kato Conversion and then i will install the whole mod again, incl. the original one. :)

 

 

Hi Mart,

 

I believe the issues have been fixed so give them a try. I'm not sure which patches you're referring to, but if you're talking about the patches on the Aradia Kato Outfit page on Nexus (bra patch and corset slot patch) I do not recommend using them as they will likely conflict with this bodyslide conversion.

 

Hey Levionte, how are you able to convert armors so easily? I've tried to convert Aradia Gold Lady and Aradia ASX Dancer but they always came out deformed for me. I can't figure out how to make them conform properly to my sliders.

 

Can you do these simple outfits and explain how you converted them?

 

Aradia ASX Dancer

http://eiheispot1.blog.fc2.com/blog-entry-130.html

 

Aradia Gold Lady

http://eiheispot1.blog.fc2.com/blog-entry-46.html

 

All I was able to was manually move the nipple shield meshes to match my current body but even then, the meshes get warped and don't retain their shape. I'm not good with Outfit studio. -_-

 

While I'd be happy to try and answer any specific questions you may have, it would be very difficult for me to explain the entire process any better than the numerous tutorials that are already out there on nexus and this site. The general idea is that you load the outfit with the reference shape of your preference (CBBE, CBBE HDT, etc.), use the mesh volume brushes to fit the outfit to your reference shape, hit Slider > conform to sliders on each object or conform all, and then go through each slider and resolve any clipping.

 

I know the learning curve is a little steep at first but once you get the basics down, it gets a lot easier to develop your technique. I only opened up Outfit Studio for the first time just a couple months ago. Best of luck, I look forward to seeing your conversions in the future.

 

 

Hi Levionte,

 

just test the new files and everything works perfect. No issues found. So finally left to say, you, sir, are awesome! ;)

 

Thanks a lot for another great conversion.

 

 

TRUEPATRiiOT

TRUEPATRiiOT

Posted
Posted

I've tried countless times to convert the Aradia Lace Dress from BAMM! and from other sites I've found, but I can't seem to get it. I've even gone to some other modders, including ChronoTrigger, and he said it'd take awhile since he was so busy. The thong has it's own body attached and the other pieces don't fit right unless that is on. I'll leave the file down below if anyone can seem to get it working.

 

!!!Note!!!

The file is UNPB BBP and I would love if someone could do it in CBBE TBBP/HDT

 

Aradia Lace Dress:

 

 

05117370.jpg

 

 

Aradia Lace Dress - UNPB BBP.7z

Guest Jenova23

Guest Jenova23

Posted
Posted

I've tried countless times to convert the Aradia Lace Dress from BAMM! and from other sites I've found, but I can't seem to get it. I've even gone to some other modders, including ChronoTrigger, and he said it'd take awhile since he was so busy. The thong has it's own body attached and the other pieces don't fit right unless that is in it. I'll leave the file down below if anyone can seem to get it working.

 

!!!Note!!!

The file is UNPB BBP and I would love if someone could do it in CBBE TBBP/HDT

 

Aradia Lace Dress:

 

 

 

20130428_01.jpg

 

 

 

It's already converted.

 

TRUEPATRiiOT

TRUEPATRiiOT

Posted
Posted

 

I've tried countless times to convert the Aradia Lace Dress from BAMM! and from other sites I've found, but I can't seem to get it. I've even gone to some other modders, including ChronoTrigger, and he said it'd take awhile since he was so busy. The thong has it's own body attached and the other pieces don't fit right unless that is in it. I'll leave the file down below if anyone can seem to get it working.

 

!!!Note!!!

The file is UNPB BBP and I would love if someone could do it in CBBE TBBP/HDT

 

Aradia Lace Dress:

 

 

 

20130428_01.jpg

 

 

 

It's already converted.

 

 

 

Where at? And if you mean in the BAMM! set, it's not. It will not work correctly with other bodyslide presets since the thong has it's own body attached to it. I beleive it's CB++ or something similar (and the proportions are a bit too thick for my tastes).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...