[mod] CBO Unofficial

[csirke128]

3 hours ago, Kerstmanbob2020 said:

Can any1 help me out here? Running on Mac M2, tried both the base + animation as the combi mod. Crashing on initial loading screen

debug.log 105.97 kB · 0 downloads error.log 2.79 kB · 1 download

 

Hi, havent seen errors like that before, does the game work on its own? How much memory do you have? Can you check if launching the game pushes you close to the limit?

[csirke128]

1 hour ago, dekeche said:

Is this compatible with 1.16? Just tried it, with only this + Carnalitas and the meshes where.... quite distorted.

 

Hi, it should work, make sure to do a clean install (so remove previous install before extracting)

I think others shown some floating shawls or smth in the thread, havent checked it yet

[psksksksksks]

hi! i just downloaded this but for some reason neither this one (base + animation) nor the original cbo vanilla shows up in the launcher. carnalitas works fine (i'm on 1,16) so i'm a bit confused?

[bigdickoskar]

Hello, I use this mod mostly for the outfits, is there anyway I can edit a file to reduce the size of the massive breasts all over the characters? I dont mind something that is slightly larger, but the breasts are so big they are clipping through arms and messing up animations.

Thanks!

[csirke128]

17 minutes ago, psksksksksks said:

hi! i just downloaded this but for some reason neither this one (base + animation) nor the original cbo vanilla shows up in the launcher. carnalitas works fine (i'm on 1,16) so i'm a bit confused?

 

Hi, it should work the same as Carnalitas.

Check the .mod file that comes with the mod, when the launcher starts, it should replace the relative path in there with an absolute path. If you have some special characters in the absolute path, it might have issues. (but then again, same should be true for Carnalitas, so not sure why it would not work)

[csirke128]

18 minutes ago, bigdickoskar said:

Hello, I use this mod mostly for the outfits, is there anyway I can edit a file to reduce the size of the massive breasts all over the characters? I dont mind something that is slightly larger, but the breasts are so big they are clipping through arms and messing up animations.

Thanks!

 

Hi, try CBO Vanilla Unofficial 1.1.zip from the download section

The breast sizes are set in "CBO Unofficial Base\common\genes\breast gene.txt", you can try compare that file with the one in Vanilla, to see what values need to be changed to make them bigger/smaller

[csirke128]

On 4/30/2025 at 4:42 PM, treevo said:

Does anyone know why nothing is happening during the court animations? They seem to be completely inactive

 

load order:

CFP

CARNALITAS

CBO

CFP CBO PATCH

 

Hi, updated the CFP Patch, hopefully should be fixed now

[psksksksksks]

21 minutes ago, csirke128 said:

 

Hi, it should work the same as Carnalitas.

Check the .mod file that comes with the mod, when the launcher starts, it should replace the relative path in there with an absolute path. If you have some special characters in the absolute path, it might have issues. (but then again, same should be true for Carnalitas, so not sure why it would not work)

I just checked but nothing was replaced, I'm guessing that's the issue? Carnalitas did cause me trouble too but when I rolled back to 1.15 then reupdated to 1.16 it worked for some reason, but here it doesn't lol. i rewrote an absolute path manually and it still did nothing

[Hustler1980]

Hey, quick question — would it be possible for you to add character_window to PA? After the new update everything seems to have broken and it’s all bugged now. Unless there’s a way to just remove that file from PA instead?

 

[csirke128]

1 minute ago, psksksksksks said:

I just checked but nothing was replaced, I'm guessing that's the issue? Carnalitas did cause me trouble too but when I rolled back to 1.15 then reupdated to 1.16 it worked for some reason, but here it doesn't lol. i rewrote an absolute path manually and it still did nothing

 

Seems like a launcher specific issue, you can try delete (or well, backup to a different place) the CK3 folder in documents, see if a fresh one would work.

 

Can you check:

"C:\Program Files (x86)\Steam\steamapps\common\Crusader Kings III\launcher\launcher-settings.json"

 

    "gameDataPath": "%USER_DOCUMENTS%/Paradox Interactive/Crusader Kings III",

 

You can also try change that path, but then I think it would restore itself to default on updates and so on.

[csirke128]

2 minutes ago, Hustler1980 said:

Hey, quick question — would it be possible for you to add character_window to PA? After the new update everything seems to have broken and it’s all bugged now. Unless there’s a way to just remove that file from PA instead?

 

 

You can try remove the gui folder from PA.

I'll update the PA in the download section soon.

[psksksksksks]

2 minutes ago, csirke128 said:

 

Seems like a launcher specific issue, you can try delete (or well, backup to a different place) the CK3 folder in documents, see if a fresh one would work.

 

Can you check:

"C:\Program Files (x86)\Steam\steamapps\common\Crusader Kings III\launcher\launcher-settings.json"

 

    "gameDataPath": "%USER_DOCUMENTS%/Paradox Interactive/Crusader Kings III",

 

You can also try change that path, but then I think it would restore itself to default on updates and so on.

I'm on Mac actually so it might look a little different, but I'm going to check! I can also see now that Carnalitas is glitchy too (events show with only generic text attached to them) so I might be the problem!

[psksksksksks]

6 minutes ago, psksksksksks said:

I'm on Mac actually so it might look a little different, but I'm going to check! I can also see now that Carnalitas is glitchy too (events show with only generic text attached to them) so I might be the problem!

 

9 minutes ago, csirke128 said:

 

Seems like a launcher specific issue, you can try delete (or well, backup to a different place) the CK3 folder in documents, see if a fresh one would work.

 

Can you check:

"C:\Program Files (x86)\Steam\steamapps\common\Crusader Kings III\launcher\launcher-settings.json"

 

    "gameDataPath": "%USER_DOCUMENTS%/Paradox Interactive/Crusader Kings III",

 

You can also try change that path, but then I think it would restore itself to default on updates and so on.

Hre is what it says, i have no idea if it's correct: 

 

{
    "formatVersion": 0,
    "modsCompatibilityVersion": "1",
    "gameId": "ck3",
    "displayName": "Crusader Kings III",
    "version": "1.16.0 (Chamfron)",
    "rawVersion": "1.16.0",
    "distPlatform": "steam",
    "gameDataPath": "~/Documents/Paradox Interactive/Crusader Kings III",
    "dlcPath": "../game",
    "ingameSettingsLayoutPath": "settings-layout.json",
    "themeFile": "./assets/theme-settings.json",
    "browserDlcUrl": "https://store.steampowered.com/dlc/1158310/",
    "browserModUrl": "https://steamcommunity.com/app/1158310/workshop/",
    "exePath": "../binaries/ck3.app/Contents/MacOS/ck3",
    "exeArgs": [ "-gdpr-compliant" ],
    "alternativeExecutables": [
        {
            "label": {
                "de": "Spiel im Debug-Modus öffnen",
                "en": "Open game in Debug Mode",
                "es": "Abrir juego en modo de depuración",
                "fr": "Ouvrir le jeu en mode débogage",
                "ja": "デバッグモードでゲームを開",
                "ko": "디버그 모드로 게임 열기",
                "pl": "Uruchom grę w trybie debugowania",
                "pt": "Abrir jogo em modo debug",
                "ru": "Запустить игру в режиме разработчика",
                "zh-hans": "以调试模式打开游戏",
                "zh-hant": "以調試模式打開遊戲",
                "tr": "Oyunu hata ayıklama modunda başlatın"
            },
            "exePath": "../binaries/ck3.app/Contents/MacOS/ck3",
            "exeArgs": [ "-gdpr-compliant","-debug_mode" ]
        }
    ]
}
 

[csirke128]

1 minute ago, psksksksksks said:

 

Hre is what it says, i have no idea if it's correct: 

 

{
    "formatVersion": 0,
    "modsCompatibilityVersion": "1",
    "gameId": "ck3",
    "displayName": "Crusader Kings III",
    "version": "1.16.0 (Chamfron)",
    "rawVersion": "1.16.0",
    "distPlatform": "steam",
    "gameDataPath": "~/Documents/Paradox Interactive/Crusader Kings III",
    "dlcPath": "../game",
    "ingameSettingsLayoutPath": "settings-layout.json",
    "themeFile": "./assets/theme-settings.json",
    "browserDlcUrl": "https://store.steampowered.com/dlc/1158310/",
    "browserModUrl": "https://steamcommunity.com/app/1158310/workshop/",
    "exePath": "../binaries/ck3.app/Contents/MacOS/ck3",
    "exeArgs": [ "-gdpr-compliant" ],
    "alternativeExecutables": [
        {
            "label": {
                "de": "Spiel im Debug-Modus öffnen",
                "en": "Open game in Debug Mode",
                "es": "Abrir juego en modo de depuración",
                "fr": "Ouvrir le jeu en mode débogage",
                "ja": "デバッグモードでゲームを開",
                "ko": "디버그 모드로 게임 열기",
                "pl": "Uruchom grę w trybie debugowania",
                "pt": "Abrir jogo em modo debug",
                "ru": "Запустить игру в режиме разработчика",
                "zh-hans": "以调试模式打开游戏",
                "zh-hant": "以調試模式打開遊戲",
                "tr": "Oyunu hata ayıklama modunda başlatın"
            },
            "exePath": "../binaries/ck3.app/Contents/MacOS/ck3",
            "exeArgs": [ "-gdpr-compliant","-debug_mode" ]
        }
    ]
}
 

 

Hi, I guess try move the contents of ~/Documents/Paradox Interactive/Crusader Kings III to someplace else to try out, but don't know much about Mac specific issues.

 

You can also try remove the spaces, but then again "Crusader Kings III" also has spaces...

[psksksksksks]

3 minutes ago, csirke128 said:

 

Hi, I guess try move the contents of ~/Documents/Paradox Interactive/Crusader Kings III to someplace else to try out, but don't know much about Mac specific issues.

 

You can also try remove the spaces, but then again "Crusader Kings III" also has spaces...

I just tried moving everything and now no mods show up at all lol. I'm confused

[csirke128]

Just now, psksksksksks said:

I just tried moving everything and now no mods show up at all lol. I'm confused

 

Did it recreate the folder, and after moving the mods back, still nothing?

[csirke128]

2 minutes ago, psksksksksks said:

I just tried moving everything and now no mods show up at all lol. I'm confused

 

There are some general stuff here:

https://www.reddit.com/r/CrusaderKings/comments/114epem/crusaders_kings_3_mods_showing_up_in_launcher_but/

 

The top answer might be worth looking into, tho its a bit more pain.

So create a new mod, then copy the contents of Carnalitas and CBO into that new mods folder, and add that to the playlist

 

[ztaku1816]

Hello @csirke128, do you have any plans on updating the OE CBO patch anytime soon, now that OE is updated to 1.16?

[csirke128]

1 minute ago, ztaku1816 said:

Hello @csirke128, do you have any plans on updating the OE CBO patch anytime soon, now that OE is updated to 1.16?

 

Hi, did it yesterday, just havent uploaded it yet, will need to test it a bit more

OE CBO Patch 1.2.zip

[ztaku1816]

39 minutes ago, csirke128 said:

 

Hi, did it yesterday, just havent uploaded it yet, will need to test it a bit more

OE CBO Patch 1.2.zip 702.9 kB · 0 downloads

Splendid! Just a heads up, MB+ is also going to be updated in a few days. I'm guessing it's pretty similar to OE, since they use the same meshes in CBO Unofficial? 

[csirke128]

Just now, ztaku1816 said:

Splendid! Just a heads up, MB+ is also going to be updated in a few days. I'm guessing it's pretty similar to OE, since they use the same meshes in CBO Unofficial? 

 

Hi, havent done the meshes for OE or MB+ yet, so these are using the original meshes.

 

I might do OE or AEP meshes in the future, I got a bit better using blender, so might actually be able to do them. (the meshes in these mods are kinda hard to make blendshapes for, they are loose clothing with lots of wrinkles, and the way I'm doing the blendshapes now just creates a mess of them)

[ptwoodlaw]

Where does one find the CBO Clothing packs? Looked everywhere.

[bigdickoskar]

Yeah, something is going on. I have changed all the values that were large in the breast gene to pretty much match the vanilla 1.1 cbo, however, I am still seing women spawn with massive fucking breasts. What else can i do?

[NAMINA77]

Hello, dear author, thank you for creating this mod to allow CBO to continue updating. However, in the latest version of the game (1.16), enabling CBO seems to cause the kinship interface and vassal interface in the game to overlap, and both interfaces appear to be clicked simultaneously. A string of English letters CV-TAB-VASSALS16 replaces the normal display of the vassal interface, while the kinship interface cannot be interacted with. For testing purposes, I closed other mods, but this issue did not disappear. So I think it was CBO that caused this problem. I updated CBO to the latest version, but it still cannot solve the problem. Hope you can find this bug? Or some other question, see if it really exists. If this problem really exists, can it be fixed in the near future? Paradox updates always render mods invalid. I will wait. As shown in the picture, this vassal interface blocks the kinship interface, making it impossible for me to interact with a specific person on the kinship interface alone. And the Fengchen interface became a string of English, and both interfaces seemed to be clicked simultaneously. You can clearly see that the remaining interface is not highlighted, as you can see, I used translation software, so there may be inaccuracies,

[BFDCYY]

It looks like the old large portrait of the character window is no longer available, can you make a new one?

Edited May 2, 2025 by BFDCYY