Servitron wont spawn properly

[Elperro66]

I installed this mod following the next instructions-

1. You need the Main file "Servitron", and one of the Optional files:
2. A) The Optional file "Servitron - BodySlide Files" contains source BodySlide files, and requires you to use BodySlide to build the meshes.
   B) The Optional file "Servitron - Default Meshes - CBBE Curvy" contains pre-built meshes, so you do not need BodySlide to build them.
   
   Install the Main file, and then the chosen Optional file.
   When installing the chosen Optional file, allow it to overwrite any files installed by the Main file!
    
3. Build the Servitron meshes from BodySlide.
4. Obviously, this step applies only if you chose to use the Optional file "Servitron - BodySlide Files".
    
5. Download and install the French Maid, and Bunnygirl Outfit.
6. You only need these mods to get the textures for the Maid Outfit and some assets from Bunnygirl outfit.
   These mods are not required for Servitron to work, but if you do not install them, you will be missing textures on their respective outfit items.
   Do not forget to Endorse these mods, if you decide to use them.
   NOTE: To get these items for your Servitrons, craft them in the vanilla Chem Station (look in "SERVITRON STUFF" category).
    
7. If you want to use the Wearable Armors...
8. You need one of the following Miscellaneous Files containing Wearable Armor plugins:
   A) Servitron - Wearable Armors (ESL / ESP): for vanilla game (no AWKCR, no Armorsmith).
   B) Servitron - Wearable Armors for AWKCR (ESP / ESP): for AWKCR v8.51 and greater.
   (if you do not know what ESL files are, just stick with the ESP plugin variants, it will be safer for you)
   
   You will also need the Wearable Armor meshes (you can get both files, but you NEED at least one):
   A) Servitron - Wearable Armors - BodySlide Files: if you want to build the meshes from BodySlide using your custom body preset.
   B) Servitron - Wearable Armors - Default Meshes - CBBE Curvy: if you cannot, or dont want to build the meshes from BodySlide.
   (Obviously, if you choose A, you will have to build the meshes from BodySlide!)
   
   
    
9. Use the "Servitron Install" holotape in game.
10. This is required for the mod to work, and you MUST do this before you try to access the Robot Workbench!
    Failing to do this will result in Servitrons being deformed as if crumpled into a small strange blob with boobs on top!
    You should get the holotape automatically after the game intro (after you leave Vault 111, including the vicinity of its outside entrance).
    The holotape will be in your inventory under the MISC category as "[Settings] Servitron Install", or under the "Setting Holotapes" category if using Valdacil's Item Sorting. If the game doesn't give it to you automatically, you can craft it in vanilla Chem Station (look for it in "SERVITRON STUFF" category).
    Load the holotape in your PipBoy, choose the "INSTALL" option, and wait for notification saying "Servitron: Installation Finished",
    only then you can access the Robot Workbench to start building any robots!!! (and before you do, check "HOW TO USE" below).

Except for the bodyslide part wich i replace with CBBE curvy, and the this happends

 

Its the same for the legs, how do i fix this ?

-heres the mod page https://www.nexusmods.com/fallout4/mods/32801?tab=description

Thanks for reading

Edited November 6, 2022 by Elperro66

[Indarello]

2 hours ago, Elperro66 said:

I installed this mod following the next instructions-

1. You need the Main file "Servitron", and one of the Optional files:
2. A) The Optional file "Servitron - BodySlide Files" contains source BodySlide files, and requires you to use BodySlide to build the meshes.
   B) The Optional file "Servitron - Default Meshes - CBBE Curvy" contains pre-built meshes, so you do not need BodySlide to build them.
   
   Install the Main file, and then the chosen Optional file.
   When installing the chosen Optional file, allow it to overwrite any files installed by the Main file!
    
3. Build the Servitron meshes from BodySlide.
4. Obviously, this step applies only if you chose to use the Optional file "Servitron - BodySlide Files".
    
5. Download and install the French Maid, and Bunnygirl Outfit.
6. You only need these mods to get the textures for the Maid Outfit and some assets from Bunnygirl outfit.
   These mods are not required for Servitron to work, but if you do not install them, you will be missing textures on their respective outfit items.
   Do not forget to Endorse these mods, if you decide to use them.
   NOTE: To get these items for your Servitrons, craft them in the vanilla Chem Station (look in "SERVITRON STUFF" category).
    
7. If you want to use the Wearable Armors...
8. You need one of the following Miscellaneous Files containing Wearable Armor plugins:
   A) Servitron - Wearable Armors (ESL / ESP): for vanilla game (no AWKCR, no Armorsmith).
   B) Servitron - Wearable Armors for AWKCR (ESP / ESP): for AWKCR v8.51 and greater.
   (if you do not know what ESL files are, just stick with the ESP plugin variants, it will be safer for you)
   
   You will also need the Wearable Armor meshes (you can get both files, but you NEED at least one):
   A) Servitron - Wearable Armors - BodySlide Files: if you want to build the meshes from BodySlide using your custom body preset.
   B) Servitron - Wearable Armors - Default Meshes - CBBE Curvy: if you cannot, or dont want to build the meshes from BodySlide.
   (Obviously, if you choose A, you will have to build the meshes from BodySlide!)
   
   
    
9. Use the "Servitron Install" holotape in game.
10. This is required for the mod to work, and you MUST do this before you try to access the Robot Workbench!
    Failing to do this will result in Servitrons being deformed as if crumpled into a small strange blob with boobs on top!
    You should get the holotape automatically after the game intro (after you leave Vault 111, including the vicinity of its outside entrance).
    The holotape will be in your inventory under the MISC category as "[Settings] Servitron Install", or under the "Setting Holotapes" category if using Valdacil's Item Sorting. If the game doesn't give it to you automatically, you can craft it in vanilla Chem Station (look for it in "SERVITRON STUFF" category).
    Load the holotape in your PipBoy, choose the "INSTALL" option, and wait for notification saying "Servitron: Installation Finished",
    only then you can access the Robot Workbench to start building any robots!!! (and before you do, check "HOW TO USE" below).

Except for the bodyslide part wich i replace with CBBE curvy, and the this happends

 

Its the same for the legs, how do i fix this ?

-heres the mod page https://www.nexusmods.com/fallout4/mods/32801?tab=description

Thanks for reading

Are you sure you used holotape to install? 

[Elperro66]

On 11/5/2022 at 11:24 PM, Indarello said:

Are you sure you used holotape to install? 

Oh man im such an idiot i mean i only have to experiment with the mod im sorry for wasting your time, anyways thanks it helped