spoonsinger Posted January 13, 2022 Posted January 13, 2022 https://www.nexusmods.com/skyrimspecialedition/mods/61719 It's pretty good! 4
mrowrpurr Posted January 16, 2022 Posted January 16, 2022 I used so many Sexlab mods to test it before release. A hard requirement was making sure it could install Sexlab and other mods with activation steps (like Defeat, Death Alternative, etc) As well as making sure it could run SLAL to Register Animations. I'll be ideally adding a feature to allow it to click an MCM menu but not wait for it to finish. So I can click SLAL's "Register Animations" but then have it continue configuring MCMs while animations are registered. It was working on a Sexlab Wabbajack modlist that inspired me to create it. I hope people find it useful. I think especially modlist authors will! 11
venomr Posted January 16, 2022 Posted January 16, 2022 1 hour ago, mrowrpurr said: I used so many Sexlab mods to test it before release. A hard requirement was making sure it could install Sexlab and other mods with activation steps (like Defeat, Death Alternative, etc) As well as making sure it could run SLAL to Register Animations. I'll be ideally adding a feature to allow it to click an MCM menu but not wait for it to finish. So I can click SLAL's "Register Animations" but then have it continue configuring MCMs while animations are registered. It was working on a Sexlab Wabbajack modlist that inspired me to create it. I hope people find it useful. I think especially modlist authors will! So I use a mod that lets you have up to 1143 mcm options, and they are sorted alphabetically. So far I haven't been able to use this mod together with your MCM recorder. (my mcm menu appears totally empty even on new games) Is there a way to make both mods work together? Mod Organizer 2 shows that the two mods are overwriting each other a bit.
manafalls Posted January 16, 2022 Posted January 16, 2022 13 hours ago, mrowrpurr said: I used so many Sexlab mods to test it before release. A hard requirement was making sure it could install Sexlab and other mods with activation steps (like Defeat, Death Alternative, etc) As well as making sure it could run SLAL to Register Animations. I'll be ideally adding a feature to allow it to click an MCM menu but not wait for it to finish. So I can click SLAL's "Register Animations" but then have it continue configuring MCMs while animations are registered. It was working on a Sexlab Wabbajack modlist that inspired me to create it. I hope people find it useful. I think especially modlist authors will! I'm already doing something like this as a hack for Sexlab. I had issues with it not finding things and throwing errors when it tried to configure the whole thing right away (probably fixed now), so I set 0001_sexlab.json to turn it on, ran all the other mcms 0002-0017, and ran 0018_sexlab.json to do all the configuring. Works perfectly. The only hiccup I'm still finding is that it won't properly apply slot equip settings for foreplay/aggressive drop downs in Sexlab. Works well now on the standard list with the index fix, but not on the other choices. I can't imagine anyone *not* installing this mod, it is so freaking useful.
sixth Posted January 17, 2022 Posted January 17, 2022 On 1/16/2022 at 2:46 PM, mrowrpurr said: I used so many Sexlab mods to test it before release. So that's why the mod worked flawlessly for me since day one! I was super worried about getting the mod since SexLab mod's tend to not play well but was very surprised and happy when it worked out all good. The only thing I've seen bugs with is the initial SexLab installation, but I've just been installing that manually first, saving and reloading, and then running a separate Recording dedicated to SexLab only. That last step most likely isn't required but it's one extra click, so oh well. On 1/16/2022 at 2:46 PM, mrowrpurr said: As well as making sure it could run SLAL to Register Animations. I'll be ideally adding a feature to allow it to click an MCM menu but not wait for it to finish. So I can click SLAL's "Register Animations" but then have it continue configuring MCMs while animations are registered. This would be amazing, I hadn't thought of using MCM Recorder with SLAL yet simply because of how long it takes
manafalls Posted January 17, 2022 Posted January 17, 2022 9 hours ago, sixth said: So that's why the mod worked flawlessly for me since day one! I was super worried about getting the mod since SexLab mod's tend to not play well but was very surprised and happy when it worked out all good. The only thing I've seen bugs with is the initial SexLab installation, but I've just been installing that manually first, saving and reloading, and then running a separate Recording dedicated to SexLab only. That last step most likely isn't required but it's one extra click, so oh well. This would be amazing, I hadn't thought of using MCM Recorder with SLAL yet simply because of how long it takes This is why I've got 2 sexlab jsons. 0001 turns it on, and later 00xx does the settings. Completely fixes this & you don't have to run in it multiple times/save, etc. Also, you can use MCM reecorder to build themed Animation packs across multiple SLAL packs - eg, run recorder, name it 'hugs and kisses', select all/favorite hugs and kisses anims from across all installed packs, register all newly enabled anims, done; you now have a permanent 'hugs and kisses' slal pack pulling from where ever you want that you can enable with a simple MCM run. or, you know, some other adult theme instead of 'hugs and kisses' :-) 1
sixth Posted January 17, 2022 Posted January 17, 2022 5 hours ago, manafalls said: This is why I've got 2 sexlab jsons. 0001 turns it on, and later 00xx does the settings. Completely fixes this & you don't have to run in it multiple times/save, etc. I'll give this a try, only real reason I've been saving/reloading is because I remembered from LE SexLab installation requires it among a few other mods, but atleast the other mods can wait so it'd definitely still save me time. 5 hours ago, manafalls said: Also, you can use MCM reecorder to build themed Animation packs across multiple SLAL packs - eg, run recorder, name it 'hugs and kisses', select all/favorite hugs and kisses anims from across all installed packs, register all newly enabled anims, done; you now have a permanent 'hugs and kisses' slal pack pulling from where ever you want that you can enable with a simple MCM run. or, you know, some other adult theme instead of 'hugs and kisses' :-) That's a good idea, I might just need to set something like that up.
scipher99 Posted January 22, 2022 Posted January 22, 2022 On 1/15/2022 at 7:46 PM, mrowrpurr said: I used so many Sexlab mods to test it before release. A hard requirement was making sure it could install Sexlab and other mods with activation steps (like Defeat, Death Alternative, etc) As well as making sure it could run SLAL to Register Animations. I'll be ideally adding a feature to allow it to click an MCM menu but not wait for it to finish. So I can click SLAL's "Register Animations" but then have it continue configuring MCMs while animations are registered. It was working on a Sexlab Wabbajack modlist that inspired me to create it. I hope people find it useful. I think especially modlist authors will! The mod is extremely helpful and runs flawless for me, Thank you.
SomeDragonbornGuy Posted January 22, 2022 Posted January 22, 2022 On 1/15/2022 at 9:46 PM, mrowrpurr said: I used so many Sexlab mods to test it before release. A hard requirement was making sure it could install Sexlab and other mods with activation steps (like Defeat, Death Alternative, etc) As well as making sure it could run SLAL to Register Animations. I'll be ideally adding a feature to allow it to click an MCM menu but not wait for it to finish. So I can click SLAL's "Register Animations" but then have it continue configuring MCMs while animations are registered. It was working on a Sexlab Wabbajack modlist that inspired me to create it. I hope people find it useful. I think especially modlist authors will! Can we get a patch for SkyUI - Resort? Only mod that shows all my MCM menus.
btasqan Posted October 22, 2022 Posted October 22, 2022 (edited) There is a problem with Pamas furniture. MCM recorder does not apply setting from Pama`s Furnitures. Anyone a solution? Edited October 22, 2022 by btasqan
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now