Jump to content

Recommended Posts

How do I use/find these armors? I only installed a few one by one that I liked. I went to the QA smoketest room but I didn't see any specific chests as the first post indicated. I guess the chest only appears when you install the mega pack (which I don't want).

 

How can I get the armors I installed?

 

Find the name of the mod you installed -- for instance "Flemeth Armor." 

 

Hit the tilde key (~) to open up the console.

 

Type in: help "Flemeth Armor" (quotation marks included)

 

It should give you the id number for the armor pieces in parenthesis. 

 

Type in: player.additem FCA00010 1

 

Where I typed the FCA00010 put the id number you find after your search (that was just an example). Where I typed 1, that is where you type how many of that particular piece of armor you want. 

 

Rinse and repeat this for each armor you downloaded. 

Link to comment

Not sure if this has been added but I just finished making a UNPB version for myself and thought you guys might want it. Just install the Huntress Esp file and plug these in over. You may also need to download and extract the textures from the full standalone pack download at the bottom of the mod page or just edit the files in nif to point them to the textures you wanna use. Enjoy!

http://www.nexusmods.com/skyrim/mods/3104/?

 

3104-1-1399795796.jpg

 

 

 

torsoef_0.nif

torsoef_1.nif

Link to comment

Ok so I went ahead and converted both the Aradia Living armor (jelly version) and the HM Priestess armor to UNPB with TBBP. I also edited the plug in to make the armors lootable off of Seekers in Apocrypha and made the Aradia armor an enchanted (poison cloak) part that you can wear along with the HM Priestess armor. You will have to install the original mods first from the links below and then either copy over the meshes if you just want the body conversion or copy over the plug in also if you want the additions mentioned above. Enjoy!

 

Conversion: http://www.4shared.com/rar/ViQxivaeba/HMpriestessUNPBTBBP.html

 

HM Prienstess on Nexus: http://www.nexusmods.com/skyrim/mods/58062/?

 

Aradia Jelly armor: http://www.loverslab.com/files/file/1253-aradia-living-armor-jellyfish-edition-v11-7292014/ 

Link to comment

Ok so I went ahead and converted both the Aradia Living armor (jelly version) and the HM Priestess armor to UNPB with TBBP. I also edited the plug in to make the armors lootable off of Seekers in Apocrypha and made the Aradia armor an enchanted (poison cloak) part that you can wear along with the HM Priestess armor. You will have to install the original mods first from the links below and then either copy over the meshes if you just want the body conversion or copy over the plug in also if you want the additions mentioned above. Enjoy!

 

Conversion: http://www.4shared.com/rar/ViQxivaeba/HMpriestessUNPBTBBP.html

 

HM Prienstess on Nexus: http://www.nexusmods.com/skyrim/mods/58062/?

 

Aradia Jelly armor: http://www.loverslab.com/files/file/1253-aradia-living-armor-jellyfish-edition-v11-7292014/ 

 ilu

Link to comment

Ok so I went ahead and converted both the Aradia Living armor (jelly version) and the HM Priestess armor to UNPB with TBBP. I also edited the plug in to make the armors lootable off of Seekers in Apocrypha and made the Aradia armor an enchanted (poison cloak) part that you can wear along with the HM Priestess armor. You will have to install the original mods first from the links below and then either copy over the meshes if you just want the body conversion or copy over the plug in also if you want the additions mentioned above. Enjoy!

 

Conversion: http://www.4shared.com/rar/ViQxivaeba/HMpriestessUNPBTBBP.html

 

HM Prienstess on Nexus: http://www.nexusmods.com/skyrim/mods/58062/?

 

Aradia Jelly armor: http://www.loverslab.com/files/file/1253-aradia-living-armor-jellyfish-edition-v11-7292014/ 

Thanks for the conversions, love the tentacle stuffs!

 

Edit: Tried the Living armor in game and found big neck/ankle/wrist seams, the jiggle works fine though, my girl is at 0 weight and I thought maybe it doesn't support weight slider? I tried some different weight values but it doesn't seem to alleviate the seams at all....

Link to comment

 

Ok so I went ahead and converted both the Aradia Living armor (jelly version) and the HM Priestess armor to UNPB with TBBP. I also edited the plug in to make the armors lootable off of Seekers in Apocrypha and made the Aradia armor an enchanted (poison cloak) part that you can wear along with the HM Priestess armor. You will have to install the original mods first from the links below and then either copy over the meshes if you just want the body conversion or copy over the plug in also if you want the additions mentioned above. Enjoy!

 

Conversion: http://www.4shared.com/rar/ViQxivaeba/HMpriestessUNPBTBBP.html

 

HM Prienstess on Nexus: http://www.nexusmods.com/skyrim/mods/58062/?

 

Aradia Jelly armor: http://www.loverslab.com/files/file/1253-aradia-living-armor-jellyfish-edition-v11-7292014/ 

Thanks for the conversions, love the tentacle stuffs!

 

Edit: Tried the Living armor in game and found big neck/ankle/wrist seams, the jiggle works fine though, my girl is at 0 weight and I thought maybe it doesn't support weight slider? I tried some different weight values but it doesn't seem to alleviate the seams at all....

 

Did you use console to get it? I forgot I left all the meshes in there, If you used console to grab the M version then yea thats probly still messed up. Sorry about that didnt mean to leave that one in there. Try the regular one and see if you still get the same issue.

Link to comment

Yeah, I did use the console to get them, but anyway I just crafted them and it's the same as before, the regular version has all those seams but the breasts/butt bounce work fine and the mucus version doesn't jiggle, both versions seem to change my body type to something else. I installed the unp skinny version of the aradia Jelly armor first then overwrite its meshes with the files you provided.

Link to comment

I am using the merged esp for this and removed the standalone .esp files. some work fine, the others show up with the armour but no textures or colour just that white/pinkish colour. Are there files in the .esp I need or could it be load order related?

Link to comment

ok so Parky you are easy to answer, make sure you have copied over the Texture folders of the original mods also (not to mention any of the extra meshes I didnt include in my conversion) As for the rest of you I know what gaps you are talking about because I ran into that while I was creating the conversion but I no longer have that problem myself. I only really replaced the Non Mucus version though because they are basically the same minus a small mesh in the groin that I just went ahead and included in my conversion anyway. So you could try copying the Body_0 and Body_1 meshes over the BodyM_0 and BodyM_1 meshes in the folder and see if that makes any difference.

 

edit: Ok I misunderstood what you guys were talking about. I thought you meant the aradia armor had gaps. Anyway i fixed the HM armor so there are no longer gaps and I also mixed the boob cups to fit better. 

 

http://www.4shared.com/rar/X3Dvdy7Yba/HMpriestessUNPBTBBP2.html

 

Link to comment

 

 

http://mitinokuoblivion.blog118.fc2.com/blog-entry-1510.html I'm not entirely sure what this is, but that breast lift idol or pose is so cool.

It's the HDT physics system.

 

N4R440T.gif

I have hdt physics system along with cbbe bbe and tbbp animations and i never get anything like this :/

 

This needs to be searched for in a different thread, there are several here on LL dedicated to this very thing alread

Link to comment

Ok so I went ahead and converted both the Aradia Living armor (jelly version) and the HM Priestess armor to UNPB with TBBP. I also edited the plug in to make the armors lootable off of Seekers in Apocrypha and made the Aradia armor an enchanted (poison cloak) part that you can wear along with the HM Priestess armor. You will have to install the original mods first from the links below and then either copy over the meshes if you just want the body conversion or copy over the plug in also if you want the additions mentioned above. Enjoy!

 

Conversion: http://www.4shared.com/rar/ViQxivaeba/HMpriestessUNPBTBBP.html

 

HM Prienstess on Nexus: http://www.nexusmods.com/skyrim/mods/58062/?

 

Aradia Jelly armor: http://www.loverslab.com/files/file/1253-aradia-living-armor-jellyfish-edition-v11-7292014/ 

 

Could you reupload the conversions somewhere? That link is broken. Thanks.

Link to comment

 

Ok so I went ahead and converted both the Aradia Living armor (jelly version) and the HM Priestess armor to UNPB with TBBP. I also edited the plug in to make the armors lootable off of Seekers in Apocrypha and made the Aradia armor an enchanted (poison cloak) part that you can wear along with the HM Priestess armor. You will have to install the original mods first from the links below and then either copy over the meshes if you just want the body conversion or copy over the plug in also if you want the additions mentioned above. Enjoy!

 

Conversion: http://www.4shared.com/rar/ViQxivaeba/HMpriestessUNPBTBBP.html

 

HM Prienstess on Nexus: http://www.nexusmods.com/skyrim/mods/58062/?

 

Aradia Jelly armor: http://www.loverslab.com/files/file/1253-aradia-living-armor-jellyfish-edition-v11-7292014/ 

 

Could you reupload the conversions somewhere? That link is broken. Thanks.

 

That link is broken yes, and if you read a few posts down from there you will see the replacement link

Link to comment

 

 

Ok so I went ahead and converted both the Aradia Living armor (jelly version) and the HM Priestess armor to UNPB with TBBP. I also edited the plug in to make the armors lootable off of Seekers in Apocrypha and made the Aradia armor an enchanted (poison cloak) part that you can wear along with the HM Priestess armor. You will have to install the original mods first from the links below and then either copy over the meshes if you just want the body conversion or copy over the plug in also if you want the additions mentioned above. Enjoy!

 

Conversion: http://www.4shared.com/rar/ViQxivaeba/HMpriestessUNPBTBBP.html

 

HM Prienstess on Nexus: http://www.nexusmods.com/skyrim/mods/58062/?

 

Aradia Jelly armor: http://www.loverslab.com/files/file/1253-aradia-living-armor-jellyfish-edition-v11-7292014/ 

 

Could you reupload the conversions somewhere? That link is broken. Thanks.

 

That link is broken yes, and if you read a few posts down from there you will see the replacement link

 

 

Yeh guess I should have read more into it. Thanks.

Link to comment

Hello there ! Can somebody convert these two awesome armors ? The Lady templar armor has a thing inside the chest armor that converts the body into some form of CBBE. Another armor also converrting the body into CBBE (i can live with it, cause it looks insane iven in CBBE) but there is strange issue with the transparancy in the waist that happens sometimes. Originaly i wanted to ask somebody to convert in into UNP Top model, but as soon as nobody wants UNPB is good too! Pleeeease ^^ i want those armors so much!
 
Sorry for my english.

服装:kyna armor.rar

Lady Templar-40626-1-0.rar

Link to comment

One of these days I swear I am going to actually play Skyrim... yesterday was not that day. That might have worked out well for you guys, though! After noticing the Nightshade Armor did not have any physics effects enabled on it, I looked around briefly to see if anyone had added it. After not finding anything, I decided to just do it myself - due to some baffling issues with Outfit Studio, that proved to be a more time-consuming task than I'd expected, but, nonetheless, I managed to get it figured out! So, here we are!

 

Nightshade Armor - dDark UNPB-TBBP Meshes v1-0.rar

This archive only contains replacement meshes for the actual armor; the UNPB version of the original mod must be installed first. With that said, I have added "TBBP" support to all of the armor pieces - by which I mean, both breast and butt physics. Depending on what animations, (or what HDT .xml), you are using, the breast movement might not be very noticeable - only the breasts themselves move, not the armor (just like on the West Wind Assault Armor).

 

NOTE: I have tested these in my game, and as best as I can tell, they work as intended. However, due to the issues I had with Outfit Studio originally, I can't help but wonder if there might be other issues with these meshes that I missed. Hopefully there aren't, but if anyone does run into any issues, please, let me know!

Link to comment

A couple of guys have made UNPB conversions of the Minidresses collection but there are no vanilla shoes converted with them. Using realgirls skin I get a terrible ankle seam with the vanilla shoes. Killer Keos did a skimpy UNPB collection and did a great job of re-doing the vanilla shoes. Im not keen on jis dresses though especially the barmaid. Would anyone be able to pull the conversions of the vanilla shoes out of KK mod and paste them into Minidresses collection? or at least get rid of the ankle seams in that conversion?

 

Sorry, don't know how to post links :s

 

Thanks in advance. :D

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. For more information, see our Privacy Policy & Terms of Use